A weird moment with my bb

ok so i got off a plane and turned on my phone. after a few minuets it turned it's self off. it would not turn on. i even pluged it in to the wall to see if it would charge and nuthing.... then on it's on say 30min later it turned back on. this phone is only 2 weeks old. well i mean since i got it from sprint. any one else had this happen?

Hi,
a Combination of 1/2 battery and low memory would do it. The device will slow or stop and clean memory when it''s
really low.
Here are some things to check help free memory:
Do you have a lot of third party applications on your BB weather, icall,bbalerts etc?
I do not know your experience level, so if you know this I'm sorry but please read and let me
know if this applies.
Most people close the applications by pressing the escape or red key. This does not close the applications.
Each application has a CLOSE option. For instance if you are in the calendar hit the menu key (spotted key) and scroll down to the bottom CLOSE is listed. Go through each application and press close. Go into the browser press menu and options select cache operations clear all categories and hit escape it will say cleaning memory.
Go to options - security - memory cleaning - enable it. The BB will now clean memory when idle for 5 minutes.
you will have an icon on you screen for memory cleaning make sure you press it. Make sure you use the CLOSE button each time you are done with an application.
http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=9225#M9225
If you follow these steps listed on the link, and keep up with your memory your phone will operate smoothly.
Please let us know if you need help with any of the steps.
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Similar Messages

Apple Banned me, because of a very weird problem with my "Factory Unlocked"

Hi Everybody! Im having a very weird problem with my unlocked iphone 4.
First of all, i would like to apologize because of my english, is not very good. My native language is Spanish.
Well.. Im from Mexico, and here we can buy the iphone Unlocked on the Apple Online Store.
Here's my problem. Apple has exchanged my iphone 3 times.
I returned the iphone the first time because the screen was totally yellowish, other than that everything was working great!, that was by the end of September.
On October 20th, i recieved my second iphone, and then a bigger problem started .
Before i continue, let me give you this information: here in Mexico we have basically 3 cell phone companies
1.- Telcel
2.- Movistar
3.- Unefon
OK, now on october 20th, i recieved my second iphone, and then procced to activate via itunes using my UNEFON sim card (microsim).
And every time i tried to activate it, only got this message onscreen:
http://i148.photobucket.com/albums/s2/jorgelomeli/Screenshot2010-10-29at24915PM. png
I though something was wrong with my brand new factory unlocked iphone 4.
I have 4 more simcards from my brothers (they all had iphone 4 too)
I tried telcel sim card, and i could activate my iphone. Then i insterted the Movistar microsim, and it worked too!! But then when i put the Unefon sim, the itunes logo inmediatly appears on the screen asking to activate on itunes, and when i tried that, the only response i got was the image above saying " The Simcard inserted on this iphone does not appear to be supported"
Weird thing here is, that, when i put my Unefon sim card on my brothers iphone 4, it worked great! on all of them, internet 3g, phone, wireless , evrything!
I called apple support, and they exchange the iphone for another one.
I recieved the third iphone on October 29. Last friday. and guess what? SAME PROBLEM! different serial number, same week production (week 42) but exactly the same message on itunes.
Very, very frustrated, i called apple again, and after 1 hour with thechnical support, they told me " We are sorry, but we can only offer you, your money back, NO MORE EXCHANGES FOR YOU"
I said why?... i dont want my money back! i want an UNLOCKED iphone!, but they refuse to give me another iphone.
When i asked techincal support, why my unefon sim card worked great on all three of my brothers iphone but not on mine, he just told me, "I really dont know, i guess they just got lucky" ****, this answer put all my trust i had on apple products for years, right on the garbage.
Since they refused to give me another iphone, i accepted my money back, and inmediatly after i finished the call, i asked my brother to buy me one more time an iphone 4 using his name, and his credit card. Now i have to wait until November 8-12 to recieve my new iphone, hoping this time i get a REAL UNLOCKED iphone, and not a partially unlocked iphone.
btw. i even went to Unefon costumer service and bought a new prepiad line, with a new microsim, just to be 100% sure that this problem is not because of the sim. And again didnt worked on my iphone, but it worked on any of my brothers iphone4.
Serial numbers of the 3 iphones:
79039C0U* (this one worked great with Unefon, only problem was yellow screen)
85042GR4*
81042FJB*
What do you suggest me? any info would be really aprecciated
FYI i also restore 4 times the last iphone and nothing seemed to work, i use 3 different computers, Macbook Pro, iMac, and an Hp with Windows 7, and the same message on all three computers.
Wierd thing also, one of my brothers bougth an iphone 4 this last week too, but he bought the 16Gb not the 32Gb. His iphone production week is 42 also! and when i put my Unefon sim in his iphone works great!
I dont know what else i can do, I just need to have faith that my new iphone coming this november will be real unlocked, but what if i'll recieve an iphone and then the same problem?? time for android? just kidding really guys, what can i do? anyone with similar problem like me? i dont wanna use Telcel or Movistar, i wanna use Unefon, and thats why i bought an Unlocked iphone
btw: jailbreak is not a solution for me, because i always like to use legal software on all my apple products, and because of the warranty.

According to http://support.apple.com/kb/HT1937, there are two official carriers in Mexico (Movistar and Telcel) and neither carrier offers an unlocked phone.

Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

Weird problem with JApplet

I'm having a weird problem with JApplet. So first I create an Applet with this code
public class japp extends JApplet {
     public void init() {
          Container content=getContentPane();
          JButton jb=new JButton("Hello");
          content.add(jb);
}and with this in the .html file;
<html>
<body>
<APPLET CODE="japp.class" WIDTH="650" HEIGHT="500"></APPLET>
</body>
</html>
And opened it in Firefox, it worked as expected. However, when I change the code in any way, i.e.
public class japp extends JApplet {
     public void init() {
          Container content=getContentPane();
          JButton jb=new JButton("Goodbye");
          content.add(jb);
}and compile it, it still shows the old button that displays "Hello". I've tried deleting the .class file from before and recompiling, that doesn't work. What am I doing wrong?
Thanks.

Reloading the page usually doesn't work. You will need to open the Java Console and clear classloader cache (x). You can also use appletviewer for testing purposes.

I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected. Please help me out!!

I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected in the other building. This problem was not there earlier but has occured recently. I would also like to mention that none of my other colleauges who uses iphone are not facing this issue. Please help me out!!

Assuming you entered the correct WiFi password for your network, see these articles:
iOS: Troubleshooting Wi-Fi networks and connections
iOS and OS X: Recommended settings for Wi-Fi routers and access points

Having a weird issue with my assign after java embedding

hi,
I'm having a weird issue with my assign activity, i am using a Java Embedding wherin i access a variable and assign it some data, later in next step when i try to assign some other data to this same variable in assign activity i get a Error message as below.
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure} parts: {{ summary=Invalid to part type. When performing the assign operation, the to node THIS,IS,,TEST is invalid. The node named in the error message was either null or an empty node set, and it was not an instance of org.w3c.Element. Verify the node value at line number 795 is not null and is an instance of org.w3c.Element. } .
i'm using soa 11.1.1.5
Can anyone please help ?
- Thanks
Shirish

Shirish,
It's a bug and you will need to apply a patch for that.
You can find all explanation in Oracle Support Id ID 1194228.1.
Arik

Weird problems with CSS being applied to JSF pages

I have this really weird problem with my CSS rules being applied to my JSF pages. My CSS rules don't get applied unless one of the following two things happen:
- A page is reloaded (by redirecting to itself, or if there were validation errors)
- The previous page in the history had the same relative reference to the same CSS file.
If a page is newly loaded, and the previous page did not have that same CSS reference, the CSS styles will not show up. Also, if the above is true, and the page is reloaded by JSF, the CSS styles show up.
Now, my problem could be solved if I put all JSP files in the same level, but the display of the first page would still be without the CSS style applied.
Is this known behaviour? And if it is, does it have anything to do do with the way JSF handles URLs (always one level back)? Help and input is kindly appreciated!

Dude,
I tried the same
<link rel="stylesheet" href="<h:outputText value="#{facesContext.externalContext.requestContextPath}"/pages/css/default.css" />
and I got the following Jasper exception.... pointers plz ??
=============================================================
2005-08-24 14:18:55,937 [http-8080-Processor25] ERROR org.apache.catalina.core.ContainerBase.[Catalina].[localhost].[mydemo].[FacesServlet] - Servlet.service() for servlet FacesServlet threw exception
org.apache.jasper.JasperException: /myproj/eventCrit.jsp(8,78) Unterminated <h:outputText tag
     at org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:39)
     at org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:405)
     at org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:130)
     at org.apache.jasper.compiler.Parser.parseOptionalBody(Parser.java:1049)
     at org.apache.jasper.compiler.Parser.parseCustomTag(Parser.java:1367)
     at org.apache.jasper.compiler.Parser.parseElements(Parser.java:1564)
     at org.apache.jasper.compiler.Parser.parseBody(Parser.java:1793)
     at org.apache.jasper.compiler.Parser.parseOptionalBody(Parser.java:1060)
     at org.apache.jasper.compiler.Parser.parseCustomTag(Parser.java:1367)
     at org.apache.jasper.compiler.Parser.parseElements(Parser.java:1564)
     at org.apache.jasper.compiler.Parser.parse(Parser.java:126)
     at org.apache.jasper.compiler.ParserController.doParse(ParserController.java:211)
     at org.apache.jasper.compiler.ParserController.parse(ParserController.java:100)
     at org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:146)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
     at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:293)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:291)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
=========================================================

Weird problems with OSX Tiger

I'm with a weird problem with my OS Tiger. I have a G4/400 AGP Graphics with a Fastmac 1.5GHz processor upgrade, 1 GB RAM, 128MB video card, USB 2.0 card and a Sonnet serial ATA card. I have two HDs: one of 80GB and another one with 250GB (serial ATA) connected to the serial ATA card.
I have installed OS X Tiger in this serial ATA HD. Some weird things are happening since then. Sometimes when I shutdown my Mac, the delay is too long, all the icons disappear and the spinning wheel cursor remains in the screen for a long time until the Mac shuts down.
Sometimes when I try to open some applications, the same thing happens, the delay is long. And it happens too when I try to quit some applications. The sintom doesn't follow a rule - sometimes happen and other times it don't happen. And when I hit optioncommandesc to force quit, the application appears in the list as 'not responding', and even when I force quit it doesn't quit at all.
I already have checked the disk permissions, I have runned MacJanitor, but the problem is still there.
Any idea?

Hello! Long delays are often caused by corrupt disk directories. I'd first boot from the install Tiger disc and run the repair disk routine and then repair permissions AFTER rebooting from the hard drive. Other than that I'd get Diskwarrior to keep the directories in good shape. Tom

Weird problems with XFCE

So I got a weird problem with XFCE (I think) sometimes everything just stops working, my PPTP vpn, can't start new applications, no shortcut commands on my keyboard works etc. For example when this happened and I tried to open a text document with gedit i got "Process /usr/bin/Thunar exited with status 1" and when I'm connected to my vpn I can't access the internet, not browsing and I can't ping other websites. And in my terminal instead of "icamaxi@localhost" it becomes "[email protected]"
This problem happens randomly and it works if you restart the computer.
my xinitrc looks like:
#!/bin/sh
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
exec startxfce4
I also get this error message sometimes if that helps you
"(process:1055): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
No protocol specified"
Xorg log
Another thing that is not related to this problem but that is annoying is that i can't lock my screen, when I try nothing happens, I've tried the shortcut command and also with the actions button applet but none of this work.
Last edited by Icamaxi (2012-11-24 17:13:22)

Icamaxi wrote:
So I got a weird problem with XFCE (I think) sometimes everything just stops working, my PPTP vpn, can't start new applications, no shortcut commands on my keyboard works etc. For example when this happened and I tried to open a text document with gedit i got "Process /usr/bin/Thunar exited with status 1" and when I'm connected to my vpn I can't access the internet, not browsing and I can't ping other websites. And in my terminal instead of "icamaxi@localhost" it becomes "[email protected]"
This problem happens randomly and it works if you restart the computer.
my xinitrc looks like:
#!/bin/sh
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
exec startxfce4
I also get this error message sometimes if that helps you
"(process:1055): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
No protocol specified"
Xorg log
Another thing that is not related to this problem but that is annoying is that i can't lock my screen, when I try nothing happens, I've tried the shortcut command and also with the actions button applet but none of this work.
I'm not certain about your first issue, but does it ever occur when you aren't connected ot your VPN?
For the screen locking problem, what are you using to lock your screen? I use xflock4, and have a keyboard command set up in the keyboard commands to lock my screen.

Weird problems with battery

Hi guys,
I having some weird problems with my new battery. I changed the old battery (that died) for a brand new one. The first problem was: the mac didn't recognized the new battery in a macbook pro 13 early 2011. So, I putted the battery in a another macbook pro 13 mid 2010 and worked. So, I passed the battery again to macbook early 2011 and worked fine. I thought this very weird, but it is ok. The big problem came after: about two or three days of regular use, the mac just didn't turn on (I'm sure the battery charge was full). Even the battery charge button didn't work, like as the battery didn't stay there. However, if I shake the mac, something happen and the battery start to work normally. few minutes after (around 15 minutes), the mac shut down immediately, like as someone disconnect the battery from MB. If I shake the mac, the same thing happen again, few minutes after the mac turn off. The other strange fact is: if I open the mac, disconnect and reconnect the cable of battery (that connect with MB), the mac start work properly and 2 or 3 days after the problem go back.
Anyone has a clue?
I'm not confident about a bad contact problem of the cable with the MB, because the problem is repeated with some regularity of days (ever 2 or 3 days after connect the cable to MB).
I guess could be a problem in the logic board of the battery... What do you think could be? If the problem is because the logic board, is there a solution?
Thanks

Call Apple and get them to take a look at it, you've done all the 'customer troubleshooting' you can ...

[Solved] Firefox 3 betas give me some weird behaviour with images

I understand that there will be problems with beta software, however I seem to have memory issues with the firefox 2 series, so I thought I'd give the beta packages a try. I'm using the firefox-nightly package from AUR (firefox3b4), and I'm getting some weird behaviour. The same behaviour can be seen in all firefox 3 beta builds, however. It's hard to explain the problem, so here's a screenshot:
Notice that the image appears twice, once in the tab, and once in the tab toolbar next to the title of the tab. It looks like an attempted preview gone terribly wrong. Upon closing the tab, the tab toolbar shrinks down to the normal size and all is well. This happens with most images up to a certain size. Any one else experiencing this problem? Any suggestions? This is very annoying and I would like anyone's input on the problem.
Last edited by valnour (2008-02-24 07:41:05)

Wow! This issue was solved in #archlinux by Nuked. Apparently I had some funky bits in my .mozilla directory. Removing it solved the problem. Remember kids, IRC is your friend. Anyone else experiencing weird stuff with their Firefox install should give this solution a try.

Weird issue with safari on iPad mini?

I just had a weird issue with my safari web page, it stopped responding to my scrolling. I then tried coming out of it and going bad in again a couple of times, which still did not work. It then started jiggling around all over the place (jiggling is the only word I can use to describe it), it was as if you had clicked and held the page with a mouse and then started moving the page all over the place, or even like an earthquake on the page. The tab then closed. Can anyone explain this? Thanks.

Quit Safari then reset your iPad.
Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Weird situation with BINARY SEARCH in READ statwment??

Hi Experts,
I got weird situation with BINARY SEARCH !! bcoz, below is my code,
data: begin of it_vbap occurs o,
        vbeln like vbap-vbap,
        posnr like vbap-posnr, ( i also tried like, posnr(6) type n)
end of it_vbap.
data: counter type i ( i also tried like, counter(6) type n)
my it_vbap is filled like below,
vbeln----
posnr
12345678-------000001
12345678-------000002
12345678-------000003
12345678-------000004
12345678-------000005
12345678-------000006
sort it_vbap by posnr. (*)
clear counter
loop it_vbap.
counter = counter + 1.
read table it_vbap with key posnr = counter
binary search (after commenting the above SORT * marked statement, then,if I delete BINARY SEARCH, then its working!!)
if sy-subrc = 0.
here is my logic.
endif.
endloop.
so, now, for
1st loop the sy-subrc = 0.
2nd loop the sy-subrc = 0.
3rdloop the sy-subrc NE 0.
4th loop the sy-subrc = 0.
5th loop the sy-subrc NE 0.
6th loop the sy-subrc NE 0.
so, why, ebven though there r all entires in it_vbap, why am getting the sy-subrc NE 0??
Is the reason that, there r less number of entries in it_vbap?? and am using BINARY SEARCH??
thanq
Edited by: SAP ABAPer on Dec 4, 2008 8:33 PM
Edited by: SAP ABAPer on Dec 4, 2008 8:37 PM
Edited by: SAP ABAPer on Dec 4, 2008 8:37 PM

Hello
The following coding works perfect (6x sy-subrc = 0) on ERP 6.0:
*& Report ZUS_SDN_ITAB_BINARY_SEARCH
REPORT zus_sdn_itab_binary_search.
TABLES: vbap.
DATA: BEGIN OF it_vbap OCCURS 0,
vbeln LIKE vbap-vbeln,
posnr LIKE vbap-posnr, "( i also tried like, posnr(6) type n)
END OF it_vbap.
DATA: counter TYPE posnr.
START-OF-SELECTION.
" Fill itab with data:
* 12345678-------000001
* 12345678-------000002
* 12345678-------000003
* 12345678-------000004
* 12345678-------000005
* 12345678-------000006
REFRESH: it_vbap.
CLEAR: vbap.
DO 6 TIMES.
    it_vbap-vbeln = '12345678'.
    it_vbap-posnr = syst-index.
    APPEND it_vbap.
ENDDO.
SORT it_vbap[] BY posnr. " for BINARY SEARCH
BREAK-POINT.
clear counter.
loop at it_vbap.
counter = counter + 1.
READ TABLE it_vbap WITH KEY posnr = counter
BINARY SEARCH. " (after commenting the above sort * marked statement, then,if i delete binary search, then its working!!)
IF sy-subrc = 0.
    "here is my logic.
ENDIF.
ENDLOOP.
END-OF-SELECTION.
By the way, if your requirement is to check whether the first item has POSNR = '000001', the second item has POSNR = '000002' and so on then you can simplify your coding like this:
counter = 0.
LOOP AT it_vbap.
counter = syst-tabix.
IF ( it_vbap-posnr = counter ).
    " put in here your logic
ENDIF.
ENDLOOP.
Regards
Uwe

Weird problem with role assignment in Portal

Hi,
In our newly installed Portal for eRecruitment Production System we encounter a weird problem with assigning roles to users.
When I open User Administration and search for roles, it displays the Portal roles perfectly.
However, when I search for a user in User Administration and click on it when found, I am unable to find any roles to assign! So I am unable to find any roles, when I want to modify the assigned roles for a particular user, while the roles do exist and can be found on its own. How is this possible? Am I missing something here?
We have installed SPS 15 and use ABAP as user store. We have used reverse proxy and web dispatchers in this case.
Thanks in advance and best regards,
Jan Laros

Found some entries in the default trace from this morning:
#1.#005056A15F78006A000004F400006D310004520B11DB3CE8#1216107404407#com.sap.security.core.jmx.impl.CompanyPrincipalFactory#sap.com/tc~wd~dispwda#com.sap.security.core.jmx.impl.CompanyPrincipalFactory.static Set evaluateDatasourcesToSearchFor(String[] requestDatasourceIds,     String privateType, Locale locale)#JALAROS#58762##nun.efteling.nl_POP_9750151#JALAROS#581700b0524011ddc029005056a15f78#SAPEngine_Application_Thread[impl:3]_36##0#0#Error##Java###Error while connecting to remote producer {0}
[EXCEPTION]
{1}#2#PRODUCER_0KTHQ3YTJV#com.sap.security.core.persistence.remote.CommunicationException: Cannot display remote roles of selected producer. The producer has removed your consumer instance from their portal.
        at com.sap.portal.ivs.global.roles.RemoteProducerAccessImpl.sendToRemote(RemoteProducerAccessImpl.java:497)
        at com.sap.portal.ivs.global.roles.RemoteProducerAccessImpl.checkConnectivity(RemoteProducerAccessImpl.java:220)
        at com.sap.security.core.jmx.impl.CompanyPrincipalFactory.evaluateDatasourcesToSearchFor(CompanyPrincipalFactory.java:656)
        at com.sap.security.core.jmx.impl.CompanyPrincipalFactory.simplePrincipalSearchByDatasources(CompanyPrincipalFactory.java:3172)
        at com.sap.security.core.jmx.impl.JmxSearchHelper.getSimpleEntitySearchResult(JmxSearchHelper.java:74)
        at com.sap.security.core.jmx.impl.JmxSearchHelper.calculateSimpleEntityTable(JmxSearchHelper.java:1182)
        at com.sap.security.core.jmx.impl.JmxServer.calculateSimpleEntityTableByDatasources(JmxServer.java:1061)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.invoke(DefaultMBeanInvoker.java:58)
        at javax.management.StandardMBean.invoke(StandardMBean.java:286)
        at com.sap.pj.jmx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:944)
        at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.invoke(MBeanServerWrapperInterceptor.java:288)
        at com.sap.engine.services.jmx.CompletionInterceptor.invoke(CompletionInterceptor.java:409)
        at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.invoke(BasicMBeanServerInterceptor.java:277)
        at com.sap.jmx.provider.ProviderInterceptor.invoke(ProviderInterceptor.java:258)
        at com.sap.engine.services.jmx.RedirectInterceptor.invoke(RedirectInterceptor.java:340)
        at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
        at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:287)
        at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:776)
        at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
        at com.sap.security.core.jmx._gen.IJmxServer$Impl.calculateSimpleEntityTableByDatasources(IJmxServer.java:717)
        at com.sap.security.core.wd.jmxmodel.JmxModelCompInterface.calculateSimpleEntityTable(JmxModelCompInterface.java:396)
        at com.sap.security.core.wd.jmxmodel.wdp.InternalJmxModelCompInterface.calculateSimpleEntityTable(InternalJmxModelCompInterface.java:443)
        at com.sap.security.core.wd.jmxmodel.wdp.InternalJmxModelCompInterface$External.calculateSimpleEntityTable(InternalJmxModelCompInterface.java:746)
        at com.sap.security.core.wd.umeuifactory.UmeUiFactoryCompInterface.getSimpleEntityTable(UmeUiFactoryCompInterface.java:471)
        at com.sap.security.core.wd.umeuifactory.wdp.InternalUmeUiFactoryCompInterface.getSimpleEntityTable(InternalUmeUiFactoryCompInterface.java:517)
        at com.sap.security.core.wd.umeuifactory.wdp.InternalUmeUiFactoryCompInterface$External.getSimpleEntityTable(InternalUmeUiFactoryCompInterface.java:894)
        at com.sap.security.core.wd.relaterole.RelateRoleComp.searchNewRoles(RelateRoleComp.java:259)
        at com.sap.security.core.wd.relaterole.wdp.InternalRelateRoleComp.searchNewRoles(InternalRelateRoleComp.java:282)
        at com.sap.security.core.wd.relaterole.AssignParentRolesView.onActionSearchNewRoles(AssignParentRolesView.java:215)
        at com.sap.security.core.wd.relaterole.wdp.InternalAssignParentRolesView.wdInvokeEventHandler(InternalAssignParentRolesView.java:261)
        at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
        at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
        at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
        at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
        at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
        at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
        at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
        at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
        at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
        at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
        at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
        at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
        at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
        at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
        at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1257)
        at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:325)
        at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:826)
        at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
        at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
        at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
        at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
        at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
        at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
        at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
        at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
        at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
        at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
        at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
        at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
        at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
        at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
        at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
        at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(AccessController.java:180)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
#1.#005056A15F780060000004FD00006D310004520C6A35F87C#1216113181849#com.sap.engine.services.security.roles.SecurityRoleReference##com.sap.engine.services.security.roles.SecurityRoleReference#J2EE_GUEST#0####399cb180524e11dd9849005056a15f78#SAPEngine_Application_Thread[impl:3]_37##0#0#Error#1#/System/Security/Audit/J2EE#Java###{0}: Authorization check for caller assignment to J2EE security role [{1} : {2}] referencing J2EE security role [{3} : {4}].#5#ACCESS.ERROR#service.naming#jndi_all_operations#SAP-J2EE-Engine#administrators#
#1.#005056A15F78005C00000C0500006D310004520C6A394185#1216113181992#com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl##com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl#J2EE_GUEST#0####39aa6d20524e11ddaee2005056a15f78#SAPEngine_Application_Thread[impl:3]_29##0#0#Error#1#/System/Server#Java###Runtime exception occurred while processing external JMX request [ JMX request (java) v1.0 len: 150 | src: 2 target-node: 9750150 req: getAttribute params-number: 2 params-bytes: 0 | ]
[EXCEPTION]
{0}#1#com.sap.engine.services.jmx.exception.JmxSecurityException: Caller J2EE_GUEST not authorized, only role administrators is allowed to access JMX
        at com.sap.engine.services.jmx.EngineAuthorization.checkMBeanPermission(EngineAuthorization.java:88)
        at com.sap.engine.services.jmx.auth.UmeAuthorization.checkMBeanPermission(UmeAuthorization.java:77)
        at com.sap.engine.services.jmx.JmxServerFrame.checkMBeanPermission(JmxServerFrame.java:98)
        at com.sap.engine.services.jmx.MessageClientSecurityWrapper.checkPermissions(MessageClientSecurityWrapper.java:76)
        at com.sap.engine.services.jmx.MessageClientSecurityWrapper.invokeMbs(MessageClientSecurityWrapper.java:38)
        at com.sap.engine.services.jmx.ClusterInterceptor.invokeMbs(ClusterInterceptor.java:196)
        at com.sap.engine.services.jmx.ClusterInterceptor.getAttribute(ClusterInterceptor.java:512)
        at com.sap.engine.services.jmx.MBeanServerInterceptorInvoker.invokeMbs(MBeanServerInterceptorInvoker.java:84)
        at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:61)
        at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
        at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:313)
        at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
        at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
        at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
        at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(AccessController.java:180)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

Weird Issue With Windows Live Mail

I have a friend using Windows Live Mail and he's been having some weird issues with it. When he goes to forward an email, it will occasionally open the email up twice, which isn't a huge deal it's just more annoying than anything. I thought maybe there was
some malware or other junk that could be causing it so I ran MBAM and got everything cleaned up but it's still happening. Any other thoughts on what could cause this?
Thanks.

Windows Live Mail support is found @
https://login.live.com/login.srf?wa=wsignin1.0&rpsnv=12&ct=1410798892&rver=6.1.6206.0&wp=LBI&wreply=https:%2F%2Fanswers.microsoft.com%2Fen-us%2Fsite%2Fcompletesignin%3Fsilent%3DFalse&id=273572
You must login to your Windows Live account and then Ask a Question.
This forum is dedicated to the Windows 7 operating system. Windows Live is not a feature of Windows 7 and Microsoft has established support for Windows Live Mail @ the Microsoft Community found @
http://answers.microsoft.com/en-us/windows/forum/windows_7-ecoms?auth=1
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

A weird moment with my bb

Similar Messages

Maybe you are looking for