A weird thing in changing UDF setting

Hi All,
I had a weird thing in UDF setting. Previously I set some valid values for an UDF, now I removed them so there is no limitation for this UDF. At least I don't see any setting in valid values in UDF management tools. But the problem is when i test my add-on it gives me error like value is not valid value for this UDF. Do I need to reboot whole SAP B1 server?
Any idea?
Thanks,
Lan

Hi Gordon,
Thanks for your reply, actually i didn't do anything just took 20 minutes break when i came back then it works.
Thanks,
Lan

Similar Messages

Without to change the setting.how to set the decimal place to 7 for an UDF.

Without to change the setting, how to set the decimal place to 7 for an UDF?

Hi
Once you create a UDF it will automatically be binded to the data source of data type that you gave at the time of creating UDF.
So i think you can not set the decimal places without changing the setting in display parameters.
i am not sure whether it will work or not one thing you can try is that create it as a alphanumeric data type and convert your decimal value to sting and then assign it to UDF,While retrieving for any manipulation you convert it as decimal.
Hope it helps you
Regards
Vishnu

I inadvertedly changed a setting where the top of my screen no longer shows the apple logo in the top left or the clock and wifi status and strength on the top of the screen, how can I get it to show both of these things again like it used to?

I inadvertedly must have changed a setting where the apple logo and files and things that used to be in the top left corner of the screen are no longer there as the clock and wifi status and other installed settings used to show up in the top right hand corner of my screen. When I move my mouse to the very top of the screen they drop down but when I move my arrow away from the very top of the screen they both disappear again. So I was wondering how can I get it to revert back to the way it used to be? I hope this isnt confusing.

I tried the zoom thing but it still didnt resolve my issue Im gonna try to clarify my issue a little bit more, before the change, my screen when I would surf the web would have the apple logo and safari and file and edit and view buttons at the top left hand of the screen and the upper right hand screen would have the time and the wifi strength and my name and the spotlight box and a volume control but now they dont show while Im browsing the web unless I take my arrow and move it to the very top of the screen then those boxes will drop down like it used to be but when I take my arrow and move it from the top of the screen it disappears again and ll I get is a back and forward arrow and the url input bar. Anyone else have any ideas of what I did to mess this up?

What are these weird things in Apple Mail?

Hi,
Does anyone know what these weird things are in Apple Mail? (Please ignore the yellow markers)
It often happens when I open the application in the first e-mail.
Thanks!
Teun

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. No typing is involved in this step.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}' | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Weird thing happening with my iCal

A weird thing is happening with my iCal, I don't know if it's a bug... Today I was printing the months of September and October with all my appointments, and when I was checking October I have noticed that 14th was printed as Saturday and as Sunday too, and 15th became Monday, 16th became Tuesday, and so on.
But in my computer screen the calendar was correct: 14 Saturday, 15 Sunday, 16 Monday, etc.
I cannot figure out what could be happening and how to solve this.
Any idea?
Any help will be appreciated.
PowerMac G4 1.5 AGP Graphics Mac OS X (10.4.7) 1 GB RAM

Today a friend of mine said that he had a similar problem with iCal when printing the month of October, and that he fixed this by changing the Time and Zone setting in System Preferences. When he changed the setting from Sao Paulo, Brazil to Buenos Aires, Argentina (the both have the same time zone) the problem was solved.
Today I did this and my problem dissapeared too. But I would like to know why is this happening.

Macbook Pro slow start up, freezing on Safari, weird things on iTunes

I have a mid-2012 Macbook Pro and it's never seemed to operate optimally. It's slow to start up and sometimes freezes on Safari pages. ITunes is difficult to navigate and does weird things. I haven't done the latest update because we don't have Wi-Fi at home. Could it be that or could I have a hardware problem? Thanks!

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

I have an iphone 4 that I recently upgraded to IOS 7, and now I cant drag music to it. It says "preparing to update" eternally. Weird thing is... I have an iphone 3s that is IOS 6, and it takes new music all day. arg.

I have an iphone 4 that I recently upgraded to IOS 7, and now I cant drag music to it. It says "preparing to update" eternally. Weird thing is... I have an iphone 3s that is IOS 6, and it takes new music all day. arg.
I have tried direct connecting the iphone 4, via wifi, everything. I hate itunes with a passion, but it seems to be a necessary evil. I dont know why I would have no trouble with my iphone 3. I am using the same technique for both phones. Find the music I want in the library and drag it to the iphone. Works on IOS 6, not IOS 7.
WHat else should I try?

Hi jeffmbellucci,
If you are having issues dragging music to your iPhone 4 after a recent upgrade to iOS 7, you may want to verify that the phone is still set to "Manually manage music and videos." You may find the following article helpful:
Apple Support: Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
Regards,
- Brenden

Windows 8 - SC6 started doing weird things, not working correctly

Windows 8 and CS6 - Liquifying tool not working and and actions not working correctly, back ground screen flickers and changes color and does weird things. I have done a complete D&R and it does the same thing. Someone with the same problem suggested a D&R and deactivate, then reinstall and reactivate, could this possibly work? if so, how would you do that? Thanks

Yes, one I can think of. Get the make and model of your video card and head over to the card manufacturer's website.
Check for and install the latest drivers for your card.
Also see if changing the settings of your GPU helps. Uncheck everything (OpenCL Anti-alias 30 bit displays) and start at Basic. then work your way up to Normal and Advanced.

Weird thing about volume

I cannot realize why, everytime I boot my MBP, the volume is set to 75% instead of 100% .
The weird thing comes when I say that, before turning it off, the volume was set to 100% .
In a simple way, I was thinking that OS X 10.6.4 restored the last configuration that I left before the last turn-off.
Why isn't this happening? Is something going wrong on my MacBook Pro?

Hi All,
Yes, you are right. After i use try block, i can see the error. I thought I should be expected an red exception alert in the B1 info bar.
Thank you !
Lan

JNDI issues - Weird things

Hi,
i'm really confused right now, it's so weird, i just can't get it.
I use POJO business objects in a layer between my session fa�ades and my cmps.
I already have on use case working like this: the fa�ade doesn't make references to other ejbs (neither in ejb-jar.xml nor jboss.xml), as it delegates the work to a business POJO.
This is business POJO looks for a local interface in the following way.
partyHouseLocalHome = (PartyHouseLocalHome)ejbHomeFactory.lookupByLocalEJBReference("PartyHouseLocal");The above code is inside the POJO's constructor. Everything works perfectly fine. I afirm/b]: The fa�ade which delegates to this POJO, which is the PartyIssuesBean, [b]does not have any reference in ejb-jar.xml and jboss.xml to the bean PartyHouseBean, the one i'm looking for in the above code.
So, today i was creating a new use case and build a very similar archicture -> a session fa�ade that delegates to a POJO.
I build a brand new session fa�ade that does not reference any other bean in ejb-jar.xml and jboss.xml. This fa�ade delegates to a POJO that, inside it's constructor, look for the following ejbs.
partyHouseLocalHome = (PartyHouseLocalHome)ejbHomeFactory.lookupByLocalEJBReference("PartyHouseLocal");
partyNegotiationLocalHome = (PartyNegotiationLocalHome)ejbHomeFactory.lookupByLocalEJBReference("PartyNegotiationLocal");Here's the weird thing, on the second lookup i get a javax.ejb.NameNotFoundException !!!!
The lookup for the PartyHouseBean works, but the lookup for the PartyNegotiationBean does not work!!!
Then, i decided to add a reference (in ejb-jar.xml and jboss.xml) to the PartyNegotiationBean for the Session fa�ade the delegates to this POJO.
With that, i lookup works fine !!!!
In other words:
- When i lookup from this POJO for the PartyHouseBean (as in the code above) i do not need a reference to PartyHouseBean in ejb-jar.xml or jboss.xml for the fa�ade that uses this POJO.
- When i lookup from this POJO for the PartyNegotiationBean, it only works if a set a reference to PartyNegotiationBean in ejb-jar.xml and jboss.xml for the fa�ade that uses this POJO.
How weird is that????
I couldn't see any thing diferent between the code of PartyHouseBean and PartyNegotiationBean..., is there some kind of externalize????
I'd appreciate any help.
Leandro

How weird is that????it looks very weird, indeed....
But after you think about those guys that wrote JBoss this looks not so surprising after all.
but jokes aside.... I think you should always use ejb-local-ref when you invoke local EJB's.
best regards,
Maris Orbidans

How to Change Trackpad setting to ...

How can I set the trackpad in such a way such that when i click on lower right corner of it >>> i get the options that list (open in a new tab, open in a new window, etc) when using the browser
It gets really annoying when using the internet
I know i have to change the setting through system preferences ... but i don't know what to change it to
Kindly help me with my problem

Go into Expose & Spaces preferences (under the Personal category), click on the "Spaces" tab, and at the bottom of the window is the "Keyboard and Mouse Shortcuts" panel. The second drop-down menu for "to activate Spaces" will say "Secondary Mouse Button". (hence spaces being activated when you click the 'secondary mouse button' - bottom right corner of the trackpad) Change this menu to the "-" or "Middle Mouse Button" (since there is no middle mouse button on an  trackpad, this will do the same thing as the "-").
And have you tried the two-finger tap option. That's what I personally use the most.
Hope that helps!
~liam

How can I change sequence setting after done editing?

I just finish editing one of my video project. Unfortunately, just found out the sequence I was working with was in wrong settings. I tried to change aspect ratio from HD1440 *1080 to HDTV 1080i (16:9). However, after I changed the setting, my footage got all stretched out. Is there someway I can still change my sequence to HDTV 1080i without distorting it? Or do I have to re-edit everything with a new sequence, which I will hate it. Thanks a lot.

Highlight all your footage and then control click or right click and choose REMOVE ATTRIBUTES, and then choose things like BASIC MOTION and DISTORT. If you have stills with moves, or some clips with push ins, you can avoid those and do them separately.
Shane

Firefox keeps my history for too long. how can i change the setting to 2 weeks

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/903677]]</blockquote>
firefox keeps my history for too long. how can i change the setting to 2 weeks

Do you mean you have a Macbook Pro (laptop) versus a Mac Pro (desktop)?
You can back up the MBP, restart using Command+R to boot into the Mavericks Recovery HD, erase the Mactintosh HD and Reinstall OS X. Then you can go through setup and configure it with your information and Apple ID. Mavericks should not prompt you for an Apple ID when it goes through the install since that OS is free.
One thing you might want to consider is asking the previous owner to unregister the MBP from his Apple ID if he previously registered it. Then you can register it under your Apple ID.
The previous owner should have wiped it clean and reinstalled the OS that came pre-installed before selling it.

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.)

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.) Do you know where I go to change the setting to allow me to "always allow" cookies?

Hi lisaarnett111,
If you are having issues turning on Always Allow for cookies in Safari on your iPad, you may want to check to make sure that you don't have Private Browsing enabled, as noted in the following article:
Turn Private Browsing on or off on your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

I have the iPhone 4. I recently switched from PC to IMac. I am trying to sync my iPhone, but iTunes will not let me add or remove anything. Do I need to change a setting since I changed computers? Help!

I have the iPhone 4. I recently switched from PC to IMac. I am trying to sync my iPhone, but iTunes will not let me add or remove anything. Do I need to change a setting since I changed computers? I try to add songs from my music into my phone section and it will not go... Plus the playlists on my phone are not updated on my iTunes phone on my computer. Its like it never updated. What am I doing wrong??

Iphone will sync with one computer at a time.
When you sync to another it will delete the current content.
Make sure you have copied everything from your old computer to your new one first.

A weird thing in changing UDF setting

Similar Messages

Maybe you are looking for