A white smudge in the center of my macbook pro monitor

Im starting to notice a white smudge in the center of my screen, and its only noticable on a black background its definitely inside the screen because if I turn it off or dim the brightness it cannot be seen. If it is a defect in my screen, does my warranty cover a repair?

Apple provides 1 year warranty against manufacturing defects, extended to 3 years if you purchased AppleCare.
As to what they will do, Genius Bar needs to evaluate it and decide if it is a manufacturing defect. I only mention that "if it is" because we are only users like you. Manufacturing defects are repaired by Apple at no cost.

Similar Messages

Booklet Gutter Issue - When I print a booklet at 11x17, it causes a large white line down the center. But, when I try the same thing at 8.5x11 it prints side by side as it should. Help?

I have a 36 page booklet (each page is 8x5.5in). I have exported the booklet from InDesign as Pages. In Acrobat, when I select Print Booklet and 11x17 paper, it created a large white gutter down the center and the pages do not back up to each other.
I tried the same thing with 8.5x11 paper and they pages backed up to each other correctly with no white space down the center.
I tried again at 11x17 (size needed to print my booklet full size), and it's still causing the large white gutter. It's nearly half an inch or larger.
Help is VERY appreciated!

" Hello Jeff. Here at Oki Data, we do not support programming. I would recommend contacting Adobe for further assistance. You can also browse their website at http://www.adobe.com/products/postscript/.

My Ipad won't boot up I am just getting a white apple in the center of the screen?

My Ipad won't boot up I am just getting a white apple in the center of the screen?

Try to reset the device:
Device Reset (won't affect settings/data/music/apps/etc)
Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

I've got a dead pixel (white) in the middle of my Macbook-pro retina display.

I've got a dead pixel (white) in the middle of my Macbook-pro retina display, what to do?
Just bought it a a month ago, and it's really anoying me!
Harmen

Take it back in and gently but firmly try to persuade a senior supervisor to authorize a replacement. Had it been stuck on black, would have been easier on the persuasion, but you may get lucky.

Do I need an external voltage converter for Spain or is the white box on the end of my MacBook Air cord enough?

Do I need an external voltage converter for my trip to Spain, or is the white box on the end of my MacBook Air power cord enough of a converter?

Thank you very much! Apple telephone support couldn't come up with the answer. I won't haul that heavy external voltage converter to Spain. It weighs a lot!

The sound on my macbook pro does not work if I plug headphones in I can still hear but it will not project volume out loud and when I try to turn up the volume it is just greyed out what do I do ?

The sound on my macbook pro will not project anything if I plug in headphones I can hear but when I take them out and try and turn up the volue the speaker is grey and the bars under it are white with a no volume sign ( circle with a line through it) how do I fix this ?

Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers
    Make sure that Mute is not enabled.
2. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.
6. System Preferences > Sound> Sound Effects
    Play sound effects through:
   Select "Internal speakers" and then back to "Selected sound output device".

I have a very tiny, fuzzy black speck on the screen of my Macbook Pro 15".

I have a very tiny, fuzzy black speck on the screen of my Macbook Pro 15". It doesn't resemble dead pixels I've encountered in the past (it is only visible behind a white or brightly colored background), and I'm positive it isn't sitting on the surface. The computer is only a year and a half old and my software is up to date.

Hi austinbread,
It is hard to tell exactly what your issue with the MacBook Pro’s display is, but it is possible that there is a pixel anomaly. See this article for further information -
About LCD display pixel anomalies for Apple products released in 2010 and later
http://support.apple.com/kb/HT4044
Thanks for using Apple Support Communities.
Best,
Brett L

I'm looking for screws for the bottom of my macbook pro unibody.

I need screws for the bottom of my macbook pro unibody. They started falling out after I upgraded my RAM, apparently they had some type of threadlock on them. Apple was of little help and directed me to a an apple store or service center which is not convienent. So far, I've been only able to find the 'old' pack of 5 screws, not the pack of 10 that my mac requires. I did find one seller on ebay advertising them but would like to avoid that path if possible. Any help in this matter will be greatly appreaciated. Thanks

No this is not a common problem. Have you had the bottom off before?
The factory set screws you see a bit if blue lock tight which makes it more difficult the first time out.
They can replace the screws over the counter at any authorized repair service or Genius bar:
Genius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

The screen on my MacBook Pro Retina has horizontal lines and has a brightness flicker every few seconds since june 2013 upgrade of airport utility.

The screen on my MacBook Pro Retina has horizontal lines and a flicker every few seconds this happened after this weeks Airport Utility 6.3 upgrade.

Hi John,
I would take your machine into a Apple service center. Its highly likely a hardware issue. The most likely issue being the display has failed. If there is no external damage to the machines display they will replace the whole display under warranty for you.

The screen on my macbook pro wont stay at a steady lighting

at random moments the screen saver on my macbook pro wont stay at a steady lightening. From time to time the lighting will turn birght and then it wil dim, randomly.
my first instinct is that someting might be wrong with the hardware, however, i've told to reset my power center.
How do you reset the power center on a macbook pro?

Go to system perferences ,then click display and check if ur on auto ajust brightness this make screens changing due to lighting background,u might want to turn this off,ur decision.......or check ur energy saver beside display u might have very short settings,u can adjust both computer sleep or display sleep or in window u can see say slightly dim the display while on battery power,u might want to put this tick out....u hav selection of choices.....

Keyboard plugs into the back of my display does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

My keyboard plugs into the back of my display monitor it does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

Try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Resetting network settings: Setting>General>Reset>Reset Network Settings

I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.

BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton

When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine. Any ideas on how to get 5.0 working?

When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, W

I'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster.

The sound on my macbook pro is not working

The sound on my macbook pro is not working. When I increase the sound, the icon appears as if everything is working, but no sound comes from the speakers. Earphones don't work either. I have tried a PRAM reset but at times, this doesn't even work. It's really frustrating having to restart my computer every time I want the sound to work, and even when I do that, theres a 50 50 chance of it working again. It generally happens after my laptop goes to sleep and I wake it up. Has anyone else had this problem and fixed it or even know what caused it?
There are a lot of discussions around the earphone jack but I have checked that. I've tried a PRAM reset which hasn't worked, and my sound output is set to Internal speakers.
HELP!!

Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers / Headphones
    Make sure Mute is not enabled.
2. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
4. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.

The Sound On My MacBook Pro Isn't Working

The sound on my MacBook Pro is usually fine, but today it didn't work. For example, I tried listening to music on iTunes and watch videos but the volume wouldn't work at all. When I go to turn up the volume, it seems to turn up ok, but when I try to put on some music, it doesn't work at all. I then tried using my brother's Apple headphones on my MacBook Pro, and then the sound worked normally. I really would like this fixed so if someone could help me that would be great, because I don't want to keep using my brother's headphones just to watch a video or listen to music. Thank you to anyone who helps!

Hey
I did a NVRAM reset, and nothing happened. The sound stayed the same. Whats an audio output port, where can you find it, and where can you find the red light? When I try turning up the volume, instead of turning it up a cross sign appears under the speaker, thus no volume turns up. The menu bar right at the top of the screen - the speaker icon is not black, but more a very light grey.
Thanks for helping though!

A white smudge in the center of my macbook pro monitor

Similar Messages

Maybe you are looking for