A wierd problem after updating my skype
i not know if this is the good place to post it but if its wrong please move it to the good place.
after updating my skype to the new version from skype i got this message message from it and its telling me that i cant see my facebook friends message and tell me that i most download the newst versoin from skype after updating it to the new version.
my version from skype is: 6.7.0.102
that most be the last version from skype so far
can somebody help me maybe to fix this problem?
You may need temporary to disable AVG when installing the new Skype update or configure this Antivirus to allow Skype.
Alternatively, you can use this method.
Download, but don’t run this installer for the latest 6.9.0.106 version.
http://download.skype.com/msi/SkypeSetup_6.9.0.106.msi
Using the procedure described here,
http://community.skype.com/t5/Windows/How-to-update-Skype-without-using-any-Skype-installer/m-p/7073...
extract the Skype.exe file from the SkypeSetup_6.9.0.106.msi file and replace your currently installed Skype.exe with this new Skype.exe file. You will be now running the Skype 6.9.0.106 version.
Similar Messages
-
Skype problem after update problem in the phone language
Skype problem after update problem in the phone language
after update to the Windows version the previous month after Skype version update I get this message that came in and tried in every way and the same message so I thought it's a problem in version bskaib and I wait for the update for acne is a problem particular
to discovered that Skype wouldn't even be open on your browser-and I want to know if there is a way to make to download languages because the language of the United states are available for the device does not support language harbored her mean in the sense
that I If you want the device English picked united kingdom and the United States version of does not support hardware keyboard language only!The Windows Store Development forums are for developers to discuss writing their own Windows Phone apps. For help with using Windows Phone please ask in the Windows Phone forums on
http://answers.microsoft.com .
--Rob -
White screen problem after updating to 1.1 firmware
My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP -
Photoshop CS2 problems after updating to 10.4.5.?
Anybody notice Photoshop CS problems after updating to 10.4.5.?
Hello I had the same problem
I found the following information that helped me.....
Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
Issue
Adobe Photoshop CS2 returns one of the following error messages:
"Could not complete your request because of a program error" when you try to open a file.
"Could not create a new document because of a program error" when you try to create a new file.
Solution 1:
Install the most recent update to Mac OS.
Solution 2:
Re-create your preferences files.
1. Hold CommandOptionShift when you start Photoshop.
2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Solution 3:
Disconnect your Internet connection.
To disconnect your Internet connection, do one of the following:
If you are connected to the Internet via a telephone modem, then disconnect from the modem.
If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
Solution 4:
Use a disk repair utility.
Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
Solution 5:
Ensure that all your drivers are compatible with Mac OS X v10.4.
Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
Solution 6:
Re-create your printers in Mac OS X.
To re-create your printers, first delete them and then add them again.
To delete your printers:
1. Open System Preferences from the Apple menu.
2. Select Print & Fax, and click Printing.
3. Select each printer in the list and click the delete key (the minus key).
For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
The one that fixed it for me was solution 6 -- re-creating my printers
I don't know why but it could be worth a try
Good luck
ADAM
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook + G3 iMac Mac OS X (10.4.5) -
My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possibleMy itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible -
Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!
My device is Iphone 5 64gb IOS 8.
I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
1. How can i fix it?
2. Or how to rollback to IOS 7+ ?
3. Should i come to app store with this problem?I'm having this same problem too. Worked fine prior to iOS update. I contacted Verizon this morning who advised that this is a known issue. They suggested I backup my device, and perform a factory data reset. When prompted to update to iOS 8 again, re-installation has been known to resolve the issue. With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.
-
what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?
SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.
-
I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP
I am facing the same issue! I bought 5c few days back
and everything was fine till I updated the software 7.0.4!
Whenever am connected to wifi am unable to make a call and if someone tries
Calling me they get the message that my number is not
Reachable! When I go back to 3G the calls work perfectly!!
Please help me out since I use wifi more than my network.
Appreciate any advise on this -
Flash player problem after updating to belle on my...
flash player problem after updating to belle on my nokia c7.when I try to play .flv videos screen goes blank as show in image,previously these videos runs fine on symbian anna plz help plz help or tell me the way to downgrade to anna
Attachments:
scr000002.jpg 10 KB1) product code 059B7W0
2) software version 111.030.0609
3) it is actually stored .flv files on my phone workes fine on symbian anna
Attachments:
Scr000003.jpg 17 KB
Scr000004.jpg 15 KB -
Anyone has any problem after updating to iSO 4.3.1 ?
anyone has any problem after updating to iSO 4.3.1 ?
I would like to know before updating mine.My 3G kept freezing after iSO 4.2.. and after reading the forums I updated both my Itunes and software to iOS 4.3.1, now I've lost my notes, contacts, calender entries and so far in the last ten minutes it's turned off and restarted itself and sync'd continually about 5 times.
So basically I'm still where I was before only more cranky. In addition, I live in Australia and there are no Genius places here, there is no support from Apple unless you pay for it even by an email, you basically end up fending for yourself under a supposed warranty that isn't worth the paper its printed on.
It you haven't already guessed, I'm more than a little ****** off.
If I'd known how much trouble this was going to be, I don't think I would have spent the $400 odd dollars to buy it.
If its not right by the weekend I'm taking it back to the shop I bought it. -
Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?
Has your problem been solved by the updates??
Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
Microsoft Office 2011: version 14.2.3
Mountain Lion: 10.8.2 (12C60) -
Cpufrequtils problem after update
Hello!
I've a problem after update my system with pacman -Syu.
When system loads cpufreq i've this problem:
cpufreq-set: error while loading shared libraries: libsysfs.so.1: cannot open shared object file: No such file or directory
I try uninstall the cpufrequtils package and reinstall it but doesn't works
How can i fix it?
thanks.raskolnikov wrote:
No need of cpufrequtils :
$ cat /etc/rc.local
#!/bin/sh
echo conservative > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
That's ok. And of course powernow-k7 in MODULES array of rc.conf
Sure, that's pretty much what cpufrequtils do, however, they a) don't spawn a shell process and b) allow you to configure sudo to handle user-based changes. It's just a nice wrapper for that.
raskolnikov wrote:BTW the last update of this (cpufrequtils) package has overwriten my /etc/conf.d/cpufreq file, is this a normal comportement ? This file was not in NoUpgrade as if I remeber correctly, NoUpgrade was deprecated with last pacman package...
Errm, blame me - that file should be backed up. Thankfully, it's not a giant config file. -
my iphone 4s wifi and bluetooth problem after updating ios 8? please help me...
Hey there Abdulrahim0259,
I would recommend that you use the following 2 article to help troubleshoot the Wi-Fi and bluetooth issues you are seeing, respectively:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
And:
iOS: Troubleshooting Bluetooth connections - Apple Support
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem? I lost my notes, calendar, songs, games+ more. I've tried everything to restore these, but it won't let me. HELP!!!!'
Restore from iCloud Backup
1. Settings>General>Reset>Erase all content and settings
2. Tap Erase
3. You'll see Apple logo and progress bar
4. Hello
5. Slide to set up
6. Set language
7. Set country
8. Choose Wi-Fi network; enter Wi-Fi password
9. (a) Use Location Service (b) Don't Use Location Service
10. Select option
11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
12. Selected Restore from iCloud Backup
13. Enter password for iCloud
14. Agree to Terms and Conditions
15. Setup Apple ID
16. Select backup
17. Restoring from iCloud
18. Hello
19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
20. Continue
21. Finish setting iCloud enter Password
22. Updating iCloud settings
23. Create a Passcode
24. Welcome to iPad
25. Get Started
26. Restoring Apps and Media
27. Enter Apple ID and Password
28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
29. Connect iPad to iTune to sync with computer
30. Sync Music, Videos and Album Artwork -
i have a problem after update version 6.0.1, the call not smoothly. how is your ideas?
Hi all
Like to share that my AV Adapter problem is solved ... brought it to Apple Service Center as a last resort after the new iOS v5.1 did not solve mine like some others have theirs solved.
In fact, the Apple Service Center tried my AV Adapter and find that it does not work with their iphone and ipad too and flagged for a replacement.
Just this week collected the replacement and tested that the replaced adapter works !
So this "unsupported device" error msg could also be due to faulty adapter .... although it is unbelievable that a "simple" wired connector could so easily breakdown after 1 time use ! I never did believe that it can be broken so easily as we hardly used it after the first testing with our TV on HDMI.
Closing this chapter of mine finally.
Maybe you are looking for
-
Photoshop Elements 4 Animation Problem
Hey everyone. Sorry for posting this in the iMac forum, but there really was no other forum for my problem. I am using Photoshop Elements 4, and whenever I try to save an animated gif, I cannot edit the frame delay or loop options, they will not resp
-
Can I remove or delete the albums that appear automatically in my Album lis
On later versions of the iOS, Apple has decided to "heplfully" create four fixed automatic Albums. These are All Photos, Panoramas, Last Import and Recently Delelted. I use my Albums as a place to show group and show related images that I have select
-
I am hoping someone can help me out with this. I am creating my own record that has the format (id_1, title_1, id_2, title_2...id_50, title_50). I was wondering if there was a way that I could iteratively assign values to each attribute in this recor
-
Header and Item level in Material Master
Can some one explain abt the header level and item level in Material master. Thank you Appreciate your Help
-
Modem AEBS Laptop. Which of those should have DNS server details set?
Hi, I have a modem which is connected to an AEBS. And the AEBS connects via air to my laptop. Which of these three things should have the DNS server IP addresses, supplied by my ISP, set in them, and which shouldn't? The modem has a web page based se