A Workaround to Error 2125 _"The offset in this file is too large"

It seems that this means there is a discrepency between where the file actually ends and where the file says it ends.
I was unable to export an Prores 422 file either from FCP or QT Pro, I tried several different things and was finally able to export,Using "Episode",to H264 in a QT container with TC track enabled. I noted that at the very end of the resulting transcode, the original timecode ended and, starting from 00:00:00:00 the time code counted UP for 15 seconds. I went to QT Pro opened the original file, and using the "Trim to selection" function, I re-established the out point minus the discrepancy, then saved without creating a new version. The original file was repaired,This solved the problem.if you get this error I would recommend removing ANY excess black or footage after the desired content using this method (done with a Mac,see specs below,so not tested with PC)
J>H<L

Backup the device, then immediately restore it.
tt2

Similar Messages

The message I get is: Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 111.27 GB but only 42.1 GB are available.

I have a problem with my Time Capsule. The message I get is: Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 111.27 GB but only 42.1 GB are available. As a result, my backups are no longer running. My umderstanding was that the Time Capsule would automatically delete old backups to make space. Can anyone help me figure out how to get my backups to run again?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

My time Machine keeps saying, "Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 345.74 GB but only 289.80 are available." I have already excluded files. I have a 1tb external drive. HELP!!!

For over two weeks now I have been frustated and not having my TIme Machine back up to my 1tb external drive. I dont understand why now its a problem. It keeps saying
"This backup is too large for the backup disk. The backup requires 345.74GB but only 289.80GB are avialable. Time Machine needs work space on the bakup disk, in addition to the space required to store backups. Open Time Machine preferences to select a large backup disk or make the bakup smaller by excluding files." So I have already excluded almost all of my files, and even deleted the backup disk yet, that quote still keeps popping up. I am truly at a wall with this. I have a Mac OS X version 10.7.5. CAN SOMEONE HELP ME PLEASE????

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Firefox was working, today did not start with error message the the version of this file is not compatible with the version of windows you're running.

Computer has Windows 7 Ultimate 64bit. Firefox has run fine for over a year on this computer. Nothing was changed or updated except Windows update shows that it installed updates on Aug 19. I had computer off for week before because out of town, came back and started on Aug 18, but Firefox worked on that day. Did not use FF again till today. Today on Aug 22nd, firefox will not start, shortcut icon has changed to program not there. Exe in folder when clicked brings up error message say the version of this file is not compatible with version of Windows I am running. Firefox exe shows created Aug 20. I suspect update, either Windows or FF but lean towards windows, happened that broke things. I notice IE 10 updates, .NET framework updates and malicious software removal tool updates were installed. I have tried restarting computer, did not fix. Tried to run as admin, didn't work. I do not want to uninstall FF unless have to because of all the stuff I have in there, bookmarks, last pass passwords, etc.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files ('''not the profile folder where the bookmarks are stored''') and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

This backup is too large for the backup disk

I have a 1TB time capsule used to backup two MacBooks. One backup file is 817GB (MacBook 1) and the other one is 137GB (MacBook 2).
I get an error message when running the backup on MacBook 2. It says "Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 55.64GB but only 42.98GB are available"
I always though the TimeCapsule would automatically remove older backupos to make space and you would never run into such an issue.
Please not that my MacBook 1 was stolen a while ago so I do not know how to reduce the size of the larger backup.

Karl R. wrote:
I always though the TimeCapsule would automatically remove older backupos to make space and you would never run into such an issue.
Usually that's true, but not always. One exception is, Time Machine will delete the oldest backups of the Mac it's running on, but not any other Mac's backups. That's probably what you've run up against here.
Please not that my MacBook 1 was stolen a while ago so I do not know how to reduce the size of the larger backup.
First, connect to the TC via Ethernet.
If you want to delete all the backups from MacBook 1, double-click your Time Capsule via the Finder, then you should see two +sparse bundles,+ one for each Mac. Delete the one for the old Mac. That will take a long time, even via Ethernet. If it's taking extremely long, see the blue box in #Q5 of [Using Time Machine with a Time Capsule|http://web.me.com/pondini/TimeMachine/TimeCapsule.html] (or use the link in *User Tips* at the top of this forum).
Or, you can delete individual backups of the other Mac. To see them, you'll need the +*Browse Other Time Machine Disks+* option, per #17 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum). To delete individual backups, see #12 in the FAQ, and don't miss the pink box there.
Message was edited by: Pondini

I get an error message saying "The iTunes Library.itl file cannot be found or created" when I try to open iTunes on my computer and the program fails to open. How can I fix this?

When I try ot open iTunes on my computer I get an error message stating "The iTunes Library.itl file cannot be found or created" and the program fails to open. How can I fix this issue?

Hi pgarard1,
If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
http://support.apple.com/kb/TS2363
Regards,
- Brenden

Error: "This backup is too large for the backup volume."

Well TM is acting up. I get an error that reads:
"This backup is too large for the backup volume."
Both the internal boot disk and the external baclup drive are 1TB. The internal one has a two partitions, the OSX one that is 900GBs and a 32GB NTFS one for Boot Camp.
The external drive is a single OSX Extended part. that is 932GBs.
Both the Time Machine disk, and the Boot Camp disk are excluded from the backup along with a "Crap" folder for temporary large files as well as the EyeTV temp folder.
Time Machine says it needs 938GBs to backup only the OSX disk, which has 806GBs in use with the rest free. WTFFF? The TM pane says that "only" 782GBs are going to be backed up. Where did the 938GBs figure come from?
This happened after moving a large folder (128GB in total) from the root of the OSX disk over to my Home Folder.
I have reformated the Time Machine drive and have no backups at all of my data and it refuses to backup!!
Why would it need 938GBs of space to backup if the disk has "only" 806 GBs in use??? Is there anyway to reset Time Machine completely???
Some screenshots:
http://www.xcapepr.com/images/tm2.png
http://www.xcapepr.com/images/tm1.png
http://www.xcapepr.com/images/tm4.png

xcapepr wrote:
Time Machine says it needs 938GBs to backup only the OSX disk, which has 806GBs in use with the rest free. WTFFF? The TM pane says that "only" 782GBs are going to be backed up. Where did the 938GBs figure come from?
Why would it need 938GBs of space to backup if the disk has "only" 806 GBs in use??? Is there anyway to reset Time Machine completely???
TM makes an initial "estimate" of how much space it needs, "including padding", that is often quite high. Why that is, and Just exactly what it means by "padding" are rather mysterious. But it does also need work space on any drive, including your TM drive.
But beyond that, your TM disk really is too small for what you're backing-up. The general "rule of thumb" is it should be 2-3 times the size of what it's backing-up, but it really depends on how you use your Mac. If you frequently update lots of large files, even 3 times may not be enough. If you're a light user, you might get by with 1.5 times. But that's about the lower limit.
Note that although it does skip a few system caches, work files, etc., by default it backs up everything else, and does not do any compression.
All this is because TM is designed to manage it's backups and space for you. Once it's initial, full backup is done, it will by default then back-up any changes hourly. It only keeps those hourly backups for 24 hours, but converts the first of the day to a "daily" backup, which it keeps for a month. After a month, it converts one per week into a "weekly" backup that it will keep for as long as it has room
What you're up against is, room for those 30 dailies and up to 24 hourlies.
You might be able to get it to work, sort of, temporarily, by excluding something large, like your home folder, until that first full backup completes, then remove the exclusion for the next run. But pretty soon, it will begin to fail again, and you'll have to delete backups manually (from the TM interface, not via the Finder).
Longer term, you need a bigger disk; or exclude some large items (back-them up to a portable external or even DVD/RWs first); or a different strategy.
You might want to investigate CarbonCopyCloner, SuperDuper!, and other apps that can be used to make bootable "clones". Their advantage, beyond needing less room, is when your HD fails, you can immediately boot and run from the clone, rather than waiting to restore from TM to your repaired or replaced HD.
Their disadvantages are, you don't have the previous versions of changed or deleted files, and because of the way they work, their "incremental" backups of changed items take much longer and far more CPU.
Many of us use both a "clone" (I use CCC) and TM. On my small (roughly 30 gb) system, the difference is dramatic: I rarely notice TM's hourly backups -- they usually run under 30 seconds; CCC takes at least 15 minutes and most of my CPU.

Output error:the name of the package "greet" does not reflect the location of this file...

output error: The name of package 'greet' does not reflect the location of this file. Please change the package definition's name inside this file, or move the file. C:\Documents and Settings\Igal\My Documents\meiran\greet\Greeter.as
I keep on recieving this output error although my source path is set to C:\Documents and Settings\Igal\My Documents\meiran\greet.
any suggestions why this happens?

The classpaths you define in your Flash software tell the compiler where to look when it needs to find a class. According to your as file, the very top line indicates the Greeter.as file should be at a location specified by the path...
one-of-your-classpaths\com\example\quickstart\
So if one of your classpaths is: C:\Documents and Settings\Igal\My Documents\meiran\greet\
and you placed the file in the greet folder, then in your AS document you should not have the "com\example\quickstart" and your import statement in the fla should not be using that (should just be... import Greeter;)

Getting the error "Adobe Send cannot currently send this file" how can I find out why?

Getting the error "Adobe Send cannot currently send this file" how can I find out why?

Hey James,
Please let me know what kind of file are you trying to send using 'Adobe Send' online service.
Does this happen with every file you try to send or any specific one?
Have you tried using a different browser? What happens? Check with your internet connection speed as well.
Hope to hear from you.
Regards,
Anubha

Web Browser "An error occured in the script on this page'

Hi,
I try to use a Web applic through std SBO Web Browser window. However I get this message: "An error occured in the script on this page'.
Why do I get this message? (I don't get it through other explorers)
Is there a way to change browser parameters? Does SBO uses IE?
BR,
Vangelis

The default is IE. Not everything that works on IE works through web application. Many open source web standards do not play well with IE. Try IE 8 or higher.

I get an error message saying the file is too large. It is smaller than 1GB.

I am trying to open a Keynote presentation on the icloud and I get an error message saying the file is too large. It is 56.76MB so it should open right?

Hi jltaylor6,
Welcome to the Support Communities! What is the size of your available iCloud storage? It sounds like this may be the issue in opening the document?
Size limits of iWork for iCloud beta documents - Apple Support
http://support.apple.com/en-us/HT202900
All iWork for iCloud beta apps
Up to 100 people can edit a document at the same time. Each document can be up to 1 GB. These documents use your iCloud storage, so the size of all your files on iCloud.com can’t be more than your total storage limit.
Manage your iCloud storage - Apple Support
http://support.apple.com/en-us/ht4847
I hope this information helps ....
- Judy

Error while compiling the ejb java source files.................

hi,
i am new to ejb.......
i have got error while compiling the ejb java source files............
while compiling..........of this three i ahve got err in ejb home interface....
ejb remote interface - succeded
ejb bean class - succeded
ejb home interface - error
the error..............is in the return type of the ejb create() method in ejb home interface(which is the type of remote interface).
the error message is cannot resolve symbol

Hi,
thanks for ur reply .....
i have done enough searching in all sites including sun forum but in vain
i have pasted my error below...
can u plz predict anything from it
D:\>path=%path%;c:\j2sdk1.4.2_12\bin;
D:\>set classpath=%classpath%;d:\Sun\AppServer\lib\j2ee.jar;
D:\>javac d:\Librarys\Library.java
D:\>javac d:\Librarys\LibraryBean.java
D:\>javac d:\Librarys\LibraryHome.java
d:\Librarys\LibraryHome.java:8: cannot resolve symbol
symbol : class Library
location: interface Librarys.LibraryHome
public Library create(String id, String name, String address, String phoneNo
) throws RemoteException, CreateException;
^
d:\Librarys\LibraryHome.java:9: cannot resolve symbol
symbol : class Library
location: interface Librarys.LibraryHome
public Library findByPrimaryKey(String id) throws FinderException, RemoteExc
eption;
^
2 errors
thanks in advance...

TIME MACHINE Error: This backupup is too large for the backup volume ...

Hi Folks !
I have also my first problems with TM. It was running, the first time nicht&day to make the first backup and now seems the device to be full! This TimeMachineError was displayed:
This backup is too large for the backup volume. The backup requires 127.5 GB but only 46.5 are available. To select a larger volume, or make the backup smaller by excluding files, open System Preferences and choose Time Machine.
END OF ERROR Message
First thing > if I choose SystemPrefs/TM there is no chance to exclude file or folders the only dialog is for Volumes
Any Idea ?
Are the TM Preferences corrupted or why I cannot choose to define my backup ?
Ciao
Massimo

When my Time Machine disk had only 50GB left, I got the message that it couldn't back up because it required 118GB to do so. Because there was, for some reason, only one day backed up, I deleted the backup files to start fresh. Now I am getting the message:
"This backup too large for the backup volume. The backup requires 1056.6 GB but only 929.4 GB are available."
Well, the backup only require 118GB a little while ago, and the initial full backup that I deleted was 880 GB. Nothing has been added to the startup disk, and a 400GB disk has been excluded to try to make this work, so this message can't be right.
How do I make this work? Do I have to keep reinstalling Time Machine every time I want to backup?

Time Machine Error This backup is too large for the backup disk

Hi, I have a 1TB Time Capsule which backs up my Mac. I was having some issues with my mac so I decided to perform an erase and install and then use Migration Assistant to transfer everything back to my Mac.
After I reinstalled Snow Leopard and restored my Mac using Migration Assistant, Time Machine says that the backup has failed. It says " Time Machine Error This backup is too large for the backup disk. The Backup requires 663 GB but only 255 GB are available.
What do I do? Is my only option to erase my Time Capsule and have it back everything up from scratch?

Hi, thanks for the help. I erased everything off of the Time Capsule and it's backing up my Mac from scratch. It's almost finished backing up my whole mac. It's now at 641.86gb of 646.54gb but it's now backing up very slowly. It's backing up .1 every few minutes. Is this normal?
Here's the log from Time Machine Buddy:
Starting standard backup
Attempting to mount network destination using URL: afp://Stuart%[email protected]/Time%20Capsule
Mounted network destination using URL: afp://Stuart%[email protected]/Time%20Capsule
Creating disk image /Volumes/Time Capsule/StuartsMacPro.sparsebundle
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Time Capsule/StuartsMacPro.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Ownership is disabled on the backup destination volume. Enabling.
Detected system migration from: /Volumes/My Book
Backup content size: 850.0 GB excluded items size: 606.5 GB for volume Stuart's Drive
Backup content size: 425.9 GB excluded items size: 67.3 GB for volume Macintosh HD
No pre-backup thinning needed: 722.56 GB requested (including padding), 928.68 GB available
Waiting for index to be ready (101)
Copied 28.3 GB of 602.1 GB, 29340 of 1478089 items
Copied 55.0 GB of 602.1 GB, 41596 of 1478089 items
Copied 82.9 GB of 602.1 GB, 55899 of 1478089 items
Copied 110.7 GB of 602.1 GB, 63347 of 1478089 items
Copied 138.8 GB of 602.1 GB, 83831 of 1478089 items
Copied 166.8 GB of 602.1 GB, 94574 of 1478089 items
Copied 194.7 GB of 602.1 GB, 102854 of 1478089 items
Copied 222.8 GB of 602.1 GB, 114388 of 1478089 items
Copied 129159 files (242.5 GB) from volume Stuart's Drive.
Copied 248.4 GB of 602.1 GB, 130414 of 1478089 items
Copied 265.5 GB of 602.1 GB, 355699 of 1478089 items
Copied 293.6 GB of 602.1 GB, 382912 of 1478089 items
Copied 322.1 GB of 602.1 GB, 387974 of 1478089 items
Copied 349.8 GB of 602.1 GB, 399204 of 1478089 items
Copied 378.3 GB of 602.1 GB, 399358 of 1478089 items
Copied 406.9 GB of 602.1 GB, 399441 of 1478089 items
Copied 434.5 GB of 602.1 GB, 415817 of 1478089 items
Copied 461.5 GB of 602.1 GB, 471528 of 1478089 items
Copied 488.2 GB of 602.1 GB, 537277 of 1478089 items
Copied 515.1 GB of 602.1 GB, 580446 of 1478089 items
Copied 541.3 GB of 602.1 GB, 590386 of 1478089 items
Copied 566.8 GB of 602.1 GB, 602496 of 1478089 items
Copied 593.3 GB of 602.1 GB, 649575 of 1
Message was edited by: Stuart Lawrence
Message was edited by: Stuart Lawrence

ERROR : OpenDoc CR to PDF - File is too large for attachment.

We are getting the following error in 3.1 using an OpenDoc call when we call a large Crystal Report to PDF format...
Error : 52cf6f8f4bbb6d3.pdf File is too large for attachment.
It runs OK from BOE when given parameters that returned 44 pages. (PDF = 139 KB)
We get the error on a parameter-set that returns 174 pages when run via CR Desktop or as a SCHEDULED Instance. (PDF = 446 KB).
Client application can't use the SDKs to SCHEDULE Instances - only configured for OpenDoc calls.....
The BOE server is running on SOLARIS - and it's is a 2 Server CMS-Cluster.
The problem is SPORADIC, so I am thinking the issue is related to a specific setting on one of the servers.
Any thoughts on where to start looking...?

Problem is _not _with the number of Rows returned - it is an issue with the size of the PDF file that it is trying to move.
Found a possible WINDOWS solution on BOB - need to find if there is an equivalent for SOLARIS...
Check the dsws.properties on web server D:\Program Files\Business Objects\Tomcat55\webapps\dswsbobje\WEB-INF\classes
See if you can change any parameter to remove size limitation.
#Security measure to limit total upload file size
maximumUploadFileSize = 10485760

A Workaround to Error 2125 _"The offset in this file is too large"

Similar Messages

Maybe you are looking for