A World image instead of apple

Today when I turned on my MacBook i saw a diferent image, was a world blinking twice then the apple appears as usual.
What does it mean?

That image means that your Macbook was trying to do a network boot. For whatever reason, it didn't default to your hard drive as the startup device.
Try resetting your PRAM by shutting down the computer, hold down option-command-P-R, and then push the power button, holding down all 4 keys until the screen flashes and it begins the boot up process as normal. Heres the apple page for resetting PRAM http://support.apple.com/kb/HT1379
Then once you get back into OSX, go to system preferences and then click on startup disk. Highlight your hard drive and you should be set.
Try resetting and see if it happens again.

Similar Messages

  • "World - Earth" logo instead of Apple logo on startup...

    Hi,
    Last few startups of my macbook pro (2,4, 15.4'') I noticed that instead of Apple logo, LCD displays "Earth" and just waits there.
    I thought that it was maybe because connected HD (fw800) and Audio card (fw400), so i tryed do disconnect both at next startup, and still "Earth" logo appeared.
    Plugged out also LAN cable on next startup, and after 15-20 sec. "Earth" became Apple logo, OSx booted.
    Does anybody have a clue, what happened? I ran hardware check from OSx installation disc, no hardware problem...
    Didn't find any post or discussion, where "Earth" logo would be explained or even mentioned...
    Can anyone explain, what is this "Earth" thing doing and what it means?
    Thanx
    i

    The Earth means it is trying a network boot. Make sure the correct hard drive is selected in the "Startup Disk" system preference.

  • Using a Disk Image instead of a physical disk

    I would like to create an image of a series of instillation disks that I would be able to later use to install an application with out these disks. I found this article on using a disk image in leu of a disk.
    http://docs.info.apple.com/article.html?artnum=106161
    If I did this would I be able to launch the disk image so the instillation application uses this image instead of a disk when prompted?
    If not, is this even possible?

    Not sure about the series deal, but if the OS is already running, then yes, you can use a Disk Image just Like a Disk, once it is mounted.

  • I don't get a fluent blending( the transparant 'checkboard layer' merge with  the images instead) of the images i like to blend

    I like to fluently blend in more images , When i use the gradient tool and hold down the shift key to draw a line , i see no fluent transition of the two images, instead part of image fades into a tranpanrant ' check board' layer instead.
    What goes wrong here?
    Blending Multiple Images in Photoshop | IceflowStudios - YouTube
    I am refering to the tutorial above..

    Yes, I understand it's not always easy to grasp to what goes on on the other side.
    I already tried the above though nothing seemed to work
    I had to use the paint brush as well but  in reverse setting to get the desired result. If I dont use paint brush the checkboard appears  thus it wont merg/ blend the images.
    I don't understand how the guy in the video did this  but with photoshop cc 2014 it seems to work different, apparantly.

  • PDF of a blueprint comes up as a whole image instead of individual lines.

    PDF of a blueprint comes up as a whole image instead of individual lines. I have tried tracing it and that does not pull out the individual lines also, stays a one image only. how do I get just the individual lines?

    Several pdfs worked perfectly during my testing before going this route.  it wasn't until later that I found some files have this issue.  I can not find what the difference is between files that work and files that don't.  Ones that work come up as individual lines right away, ones that don't are one solid image.
    As Jacob mentioned in post #7, the file in question is a scanned (raster) image of an old drawing which may not even exist in vectors ('individual lines,' as it were) anymore, if it ever had. You can't make assumptions based on the fact that a file is in PDF format. A PDF can contain all raster image data, all vector data, and/or a mix of both.
    What is the difference between vector and raster graphics?

  • How can I make the tab image instead of text.

    Hi guys,
    How can I make a tab displayed as image instead of text?
    Best Wishes,
    Fateh

    Thanks Jari,
    I use Apex 4.0.2 and the theme is Builder Blue 2. When I click edit tab, I get "Tab Label" that is required field and a region called "images". As I got from you, I cannot utilize images in my case.
    Regards,
    Fateh

  • Helvetica Light Appears As An Image Instead Of Text

    Earlier i was using "Helvetica" on my Adobe Muse website that i am designing. I had to change it from "Helvetica" to "Helvetica Light" and the text started to show as an image instead of text. I mean it does not remain text anymore and when i export the site it shows as a png file. Although i can still edit the text of course.
    I have seen a question on the forum (HERE) that explains what is happening but there is no explanation how to correct it. I really want to use Helvetica Light instead of normal Helvetica. Can any one tell me how to keep it as a text instead of a png file?
    Thanks!

    Not all visitors to your website will have Helvetica Light installed on their computer, so the only way for Muse to give that exact look is to turn the text into an image.
    If you want the text to stay live text and not become an image, you have to limit yourself to the fonts in the 'web safe' or 'web fonts' categories. If you use a system font, Muse will rasterize the text to give you the exact appearance you desire.

  • Image instead of Java

    Hi Folks,
    Im hoping that one of you guys can give me a bit of help on a project im doing. I have created a HTML page which at the moment simply consists of an image (logo.gif) which when rolled over animates with a water ripple effect.
    Its a java applet !
    The problem im having (or may have) is that some people may have java disabled in there browser prefs.
    I was wandering is there some script i can enter in the HTML page to say "if java is disabled then display this alternative image instead" ?????
    If anyone can offer me any help id much appreciate it !
    Many thank
    darren

    you can insert html code into applet tag
    this code is used by browsers if the applet can't be launched

  • How to use an image instead of Browse Button in messageFileUpload item

    Hi,
    I have sessageFileUpload item in my OA Page to upload files. How can I show my custom image instead of a Browse button that is placed by default. I don't want to show the browse button instead want to use my custom image.
    Thanks

    This is a framework object, you can't change that.
    --Shiv                                                                                                                                                                                                   

  • Dynamically Calling Background Image instead of standard setting

    Hi all,
    There is a requirement that, based on some condition I have to display shaded background image, say 'zimage1' .so as a result it should print in all pages. If condition fails, we have to display other image, say 'zimage2' in background. If both fails, no need to display background image.
    If any body knew the solution please assist me in this regards.
    Thanks & Regards,
    Nagesh.

    Do any one knew how to set Dynamic Background (Watermark) Image instead of going for the standard setting in Page. (by selecting BACKGROUND PictureTab).
    I want to pass a variable kind of information to the following fields during runtime.
    ie.,
    Path: Page->Background Picture.
    Name: <Variable image name>
    Object: GRAPHICS
    ID: BMAP
    and other properties like Ouput Mode, Position..etc.
    That image should come at backgroudn for all the pages.
    Hope, you have understood the issue here.
    Please do update me with relevnat ideas, if any.
    Thanks & Regards,
    Nagesh.

  • How to have image instead of blank player screen

    I know virtually nothing about Dreamweaver and Flash...I know
    how to update page, embed .flv files, etc, and how to encode
    videos, but that's it. I am a videographer by trade. I am putting
    videos up on my new website and they are not going to be autostart.
    How can I have an image instead of a blank screen show on the
    inactive player?
    Thanks in advance

    Hi,
    In the VO list of values, check "Include no selection item", choose "Labelled item first of the list" from the drop down and give your custom label.
    Thanks

  • Menu Buttons Change Image instead of Highlighting?

    Does anyone know how to/or if it's possible to make a DVD menu in Photoshop for Encore where, when the menu button is highlighted it actually changes image instead of making it a solid highlighted colour?
    For example...
    In a DVD i'm making, I have Cartoon images that are the menu buttons. I would like to make it so that when you select it on your dvd player it makes the eyes open up wider and mouths of the characters open up. I have made the duplicate layers and changed one to have the open eyes and mouth and placed it directly ontop of the other and put both layers in the one group with the (+) to allow Encore to recognize it. But all I get is the top layer of the two turning to a top colour. I know that using prefixes like (=1) makes it highlighted and that is why it's highlighting but I don't know what else to suggest. I've looked at the prefixes on the Encore help on this site and tried to work it out but no luck
    I know this is due to my lack of knowledge and really need some help to fix it, or know if it's even possible (I assume tht using such great products as Adobe it will be)
    Thanx

    Welcome to the forum.
    This is easily done by doing dupe Menus for each Button. The Button on the original Menu will be set to Auto-Activate, and be linked to the dupe Menu with the different graphic. I would probably turn OFF Sub-picture Highlights.
    The trick is to do a layout, and also name your Menus (especially the dupes), to reflect exactly what they do. I use Illustrator for my layout, but pencil and paper work well too.
    Note: if run on a computer, the user will need to Dbl-click the Button, as Auto-Activate only works seamlessly from a DVD set-top player.
    There are several other posts on this forum (a few very recent), where I go into much more detail. Also, Jeff Bellune's excellent book, The Focal Easy Guide to Adobe EncoreDVD 2.0, by Focal Press, has excellent, easy to follow steps for doing this. Though written for EncoreDVD 2.0, 100% of the book will apply to CS3 & CS4.
    Good luck,
    Hunt

  • Copy Paste Image instead of Upload

    Hey Guyz,
    I wanted to give user a provision to copy & paste an image instead of uploading it in a provided space on the webpage.
    Do you guyz think it's possible if so can you guide me thorough..
    Thanks...
    Krish

    813258 wrote:
    Thanks for your suggestions ...
    One more thing is if i am developing the webpage using PHP then can i use JAVA APPLET and achieve this on the same page???Well, as you may know, PHP generates HTML output and applets are embedded in html pages.
    The only tricky part is when the applet wants to send the image data to the server (otherwise it would be lost once the page is closed). You need to negotiate a suitable way to do that.

  • Showing image instead of flash for mobiles?

    I am just wondering if it is possible to show an image instead of flash content for mobiles?
    I want to allow the adobe sniffer to do its thing when it is people using pc and mac browsers and direct them to the plug in page to download the flash player if they need it, but is there a way to sniff for a mobile / smart phone browser and if they cant view flash it will show an image instead?
    Any help appreciated.

    You can use Javascript to detect the browser and platform for any given user. You can then parse that information to push the content that you want to use for the result. You can find a good write-up with example code here: http://www.quirksmode.org/js/detect.html

  • Use image instead of submitbutton

    Hello,
    I try to use an image instead of the <submitButton> Tag supported by UIX. I have a form with BC4J Table and tableSelection in it. Now I want to submit this form instead of the update or delete Buttons generated by JDeveloper with an image.
    The selected key does not come with.
    <form name="viewForm" method="POST" >
    <contents>
    <tableLayout>
    <contents> <bc4j:viewObjectScope name="UserView1" >
    <contents>
    <bc4j:table name="viewTable" width="800" alternateText="No rows found">
    <tableSelection>
    <singleSelection selectedIndex="0">
    <contents>
    <text text="    "/>
    <ui:image source="images/adddocumenttolist_enabled.gif" ctrl:event="create" shortDesc="add" /> <ui:image source="images/edit_big.gif" destination="#" onClick="submitForm('viewForm',1,{'event':'update'});return false" shortDesc="Bearbeiten" />
    <ui:image source="images/delete_L.gif?key=" ctrl:event="delete" shortDesc="Loeschen"/>
    </contents>
    </singleSelection>
    </tableSelection>
    <bc4j:keyStamp>
    <bc4j:rowKey name="key" />
    </bc4j:keyStamp>
    <contents>
    Replace one of the Image-Tags with <submitButton ctrl:event="..." text="..."/> works???
    Regards Christian

    Hello,
    I tried adding
    <formValue name="event"/> and that worked for me. This adds this html:
    <input type="hidden" name="event">
    The submit button does this for you automatically.
    Jeanne

Maybe you are looking for