A wrong effect in the inks with invisible sprites
Hello,
I am watching a wrong effect associated with the inks in a sprites.
I have several sprites located in the score which are overlapped
Specifically are images irregular. To avoid that when the user put the mouse on one of the areas the mouse interact with another area I use "Background transparent" ink and working properly.
But sometimes I put in that place a sprite (to have it available if I touch a button) and as I do not want to be seen on stage I put it invisible.
It´s strange, but after leaving that sprite invisible, without modifying the "Background transparent" ink, it don´t work if I put the mouse on the sprite.
The resulting effect is as if the ink used were the “Copy" ink.
Do you think something to avoid this problem?
Hi Burpix,
Looks like the link for the starter file within the exercise is linked to the wrong file. If you pull the project archive for Day 2 you will get all of the starter & solution files and video transcripts for all of Day 2 exercises. The starter file for ex2.04 is correct if download it from the project archive zip. Adobe will be fixing the link within the exercise later but for now you can pull the correct starter file from the project archive zip.
Similar Messages
-
Can I charge the ink with an iPad charger ?
Can I charge the ink with an iPad or iPhone charger?
Thank you for your response.
I think I used the wrong term I have a original cable I'm wondering
Can I use this cable with iPad or iPhone charge adapter to charge ınk & slide?
so sory cable not problem, my point is to adapter -
I Have IOS 8.1 on my iPad & iPhone And I use gmail. When I review email trash on the iPad, many of the emails in trash have the wrong content. The body of the email appears as the content of another email also in trash. The same emails in trash on the iPhone & in Gmail trash on the PC are all OK. if I file the email back in the inbox it Still has the body of the email with the wrong sender and addressee. Any ideas?
Greetings,
Mail doesn't create .txt files from email messages; it sends exactly what you type. If some of your recipients are claiming they receive .txt files, that would most likely be due to their email client, which no doubt is running Windoze. Only they can solve that problem. If the message is okay in your Sent mailbox, that's exactly what you sent, so the problem is on their end. -
Ipod in the car with invisible shield
I have Blitzsafe ipod adapter installed in the car and hook up my ipod with the bottom connector which plays through the car stereo and charges at the same time.
I had the invisible shield on but the ipod got very warm and froze. I took the shield off and so far the ipod is working fine. It still gets warm but did not shut down or freeze. Anyone have experience like this ?
Now I've the ipod in the Agent18 case and the ipod is fine so far in the car.I use the Blitzsafe to charge my iPod and it never seems to overheat.
(As an aside: I don't use it for the audio because I found it to boost the bass unreasonably. Only one of my two Blitz units does this, so I imagine it's just a bad unit.) -
After Effects rendering the video with the audio out of sync
so, the thing is, i did the animation on flash, exported it, put it on after to edit audio and what not, everything looks fine, previews are good, so, lets render!... every time i render the final video have the audio out of sync, specially the audio that is already on the first video. the video its originally on 12 fps, if i change the interpretation to 24fps, everything get worse. any help?
ok, both Flash and After effect are CS6, i have a Lenovo Ideapad, can handle 64 bits
first i exported the video on .MOV from Flash CS6, without any problems
Then i finished the edition on After Effects, everything look good.
i have tried to render it on MOV, AVI, MP4 and the audio for the video that was exported from flash always get out of sync. i dont really move anything else -
i bought a new black ink cartreidge when i opened it it was yellow ,, it was sealed from the company..
another issue that when i had a new one it wasnt filled the computer give me a message that the black ink is very low..
i pulled it out to see what's wrong i saw the ink is not over the roll it's just in the both sides right and left.. in the middle it's clean ,,,
i asked the guy i bought the ink from he said that the proplem is from the factory not from him ,,
what sould i do >>
Spoiler (Highlight to read)
Spoiler (Highlight to read)
This question was solved.
View Solution.Hello lovelylooly,
Welcome to the HP Support Forums!
I would not expect to see a yellow ink when un boxing a black, that is very odd. What is the model of printer you are buying the inks for? Is it possible to post a picture or two of the packaging, as well as the product number of the ink?
Thanks for posting and I hope to hear back from you
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?
That is priceless!!! Thanks! I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement. Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
My error msg is a little different from those previously stated, but close: 0xc18a0201. Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100. I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
Oh heavens, I've had the c6280 a whopping 2 1/2 years! I'm sure they want us poor slobs to have to buy a new one every year & a day! To say nothing of the exorbitant prices for ink. And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!! Yeah, & what's with that not being able to print in BLACK if a color runs out????
Anyway I really loved your essay! It's a classic! And says it all! I hate that we have to be 'slaves' to the electronic 'wonders'!!! -
What is the correct fsck syntax for issue with invisible disk ?
Hello everybody,
My problem actually (I also have a problem with the 17" Install DVD) is to repair *3 disks* with *fsck command*, as the filesystems are damaged. I phoned Apple Assistance Saturday, for about 30 minutes, but finally the Advisor sent me a link to one of their thousands (and sometimes obsolete) articles, and the solution wasn't there entirely.
I'll describe you the problem :
One of my USB external disks (4TB data) *doesn't appear* after Startup, but when I use the Install DVD and Disk Utility, the application tells me it's OK, that the disk "SEEMS" to be alright etc. That's false.
When I reboot with *Cmd + S* (root level), and tell Terminal (I have been obliged to print the four states of an American Extended keyboard) :
"sudo fsck -fy /dev/disk4s1"
the reply is :
"BAD SUPER BLOCK: MAGIC NUMBER WRONG
LOOK FOR ALTERNATE SUPERBLOCKS? yes
SEARCH FOR ALTERNATE SUPER-BLOCK FAILED. YOU MUST USE THE
-b OPTION TO FSCK TO SPECIFY THE LOCATION OF AN ALTERNATE
SUPER-BLOCK TO SUPPLY NEEDED INFORMATION; SEE fsck(8)."
So, I use the *-b option* of *fsck command*, and :
"fsck: -b flag *requires a number*"
"-b size Specify the size, in bytes, of the physical blocks used by
the -B option."
So, I'm searching *since 3 days* (and *I'm learning a lot*, but nothing, of course, concerning my problem) the full info command to know *what sector address* I have to tell to -b to install an alternate superblock, because I need to know exactly at which places filesystems and *data start* and end.
You understand, I suppose, that I can't use any of my softwares, because the disk is INVISIBLE (doesn't exist) after normal restarting.
It's not MOUNTED nor UNMOUNTED.
It exists (very well, thank you) when rebooting *with Apple Install DVD*.
I'm under *Snow Leopard 10.6.5*, and I don't know if, perhaps,
*there wouldn't be a problem* (or more) with this update ...
That's what I've seen, in any case, on other places here,
about several different issues.
Please, Bob, Gary, Camelot, etresoft, Bill, Jun, Nils, Cole, Charles, Michael,
gimme some help !
If someone has the full solution, a beginning of solution,
or a path to solution,
thank you very, very much in advance !
With my best regards
VialatteDear Camelot,
First, thank you very much for answering me and try to help me ;
Secundo, please read, if you have time, what I replied to Bill Scott,
and I have to thank you also for your slightly better contribution and understanding.
Some words of what I've replied to him are written for you too :
"I type *sudo fsck -fy /dev/disk4s2* (not s1, of course, and *Camelot is perfectly right*, having remarked this mistake, as *s1 is dedicated to partition map* volumes).
There's also *a strange thing* with Disk Utility when starting from DVD :
it doesn't display the s1 volumes as usual."
As you've read it in my reply to Bill, it's a *complicated issue* and *Apple has no response*.
You tell me : "+Good luck with that.+" It starts badly.
"+It's been a long time since I've had to deal with superblocks+"
I totally ignored their existence …
"+- they just don't come up any more,+" What is the meaning of this sentence ?
"+but I don't know any way of recovering the superblock address after a disk has failed.+" That's the matter of my question : *Is it a failure ?*
"+Typically (at least, historically) you get the superblock addresses in advance, storing them somewhere safe until you need them.+"
That's a total discovery for me.
You tell me then : "+Are you talking about in the Finder here?+" Yes and no, I talk about the Sidebar (see below), but it's part of the Finder.
"+Have you checked the Finder's preferences to make sure it's just not hiding external drives?+" I did, when you told me to do so.
"+Since everything else tells you that the drive is OK+" Yes, you're right, when starting from Install DVD, that's *very strange*, but remember fsck doesn't say *the same at all* as Disk Utility ... "+this just sounds like a Finder preference setting to me.+"
I'm sorry, it would have been wonderful. My settings are correct, that means :
NOTHING on Desktop, ALL (including Computer) in the Sidebar (and clicking on Computer allows me to check that *no volume* has vanished from Sidebar (it happens sometimes).
"+If it's not the Finder prefs, then please post the output of diskutil list in order to troubleshoot further.+"
Here it is (a little far below), but there's *none of the 2 4TB volumes* (yes, there are two disks missing now) here, because, as I already said that, they are invisible for the Finder and *Disk Utility*, and I think *it's the same for Terminal.*
You'll note there's *no BOOTCAMP partition* here (I removed it temporarly to solve this issue), and don't be afraid if there are several systems on the internal HD.
As I noticed it here and there, there are problems with 10.6.5.
So, I try to work with 10.6.4 (delivered with MBP 17"), but have also an universal 10.6.0 Snow Leopard, with which I can configurate 10.6 *at any state*.
Unfortunately, I *can't use* (it so that Apple decided to do) the DVD delivered with my 15" MBP (rejected by 17"), because it is with my MBP 15" that I formatted those disks.
*Another thing :* If I didn't want my wife *to install herself* (with me to help her) the 15" MBP I've gave to her (there's the 17" new 500GB 5400rpm installed in it by me), I would already have tried to connect these two 4TB, just to see.
Last login: Fri Nov 26 21:22:38 on ttys005
sys171064:~ OH$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *500.1 GB disk0
1: EFI 209.7 MB disk0s1
2: Apple_HFS Seagate 149.9 GB disk0s2
3: Apple_HFS System 17 64.9 GB disk0s3
4: Apple_HFS Sys171064 34.9 GB disk0s4
5: Apple_HFS For Alu Black System 149.6 GB disk0s5
6: Apple_HFS SL 10.6.x 100.0 GB disk0s6
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Applepartitionscheme *16.1 GB disk1
1: Applepartitionmap 32.3 KB disk1s1
2: Apple_HFSX olivier_herrbach 16.1 GB disk1s2
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.0 TB disk2
1: EFI 209.7 MB disk2s1
2: Apple_HFS HSD 01 TM 600 Go 599.9 GB disk2s2
3: Apple_HFS HSD 01 400 Go 120.6 GB disk2s3
4: Apple_HFS DiskTools > Seagate ... 279.1 GB disk2s4
/dev/disk3
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.5 TB disk3
1: EFI 209.7 MB disk3s1
2: Apple_HFS HELP ÉNERGIE 1,5 To 1.5 TB disk3s2
/dev/disk4
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.0 TB disk4
1: EFI 209.7 MB disk4s1
2: Apple_HFS HSD USB 03 1To 999.9 GB disk4s2
/dev/disk5
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *32.0 GB disk5
1: EFI 209.7 MB disk5s1
2: Apple_HFS Patriot USB Key 32 Go 31.7 GB disk5s2
/dev/disk6
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.5 TB disk6
1: EFI 209.7 MB disk6s1
2: Apple_HFS WD USB 1,5 To 1.1 TB disk6s2
3: Apple_HFS WD 02 350 Go Seagate 349.9 GB disk6s3
/dev/disk7
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.0 TB disk7
1: EFI 209.7 MB disk7s1
2: Apple_HFS HSD USB 02 50 Go 49.9 GB disk7s2
3: Apple_HFS HSD USB 02 715 Go 714.6 GB disk7s3
4: Apple_HFS HSD USB 02 110 Go 110.0 GB disk7s4
5: Apple_HFS HSD USB 02 100 Go 99.9 GB disk7s5
/dev/disk8
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk8
1: EFI 209.7 MB disk8s1
2: Apple_HFS WD USB 2To 2.0 TB disk8s2
/dev/disk9
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk9
1: EFI 209.7 MB disk9s1
2: Apple_HFS FW 03 TM 2To 2.0 TB disk9s2
/dev/disk10
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.5 TB disk10
1: EFI 209.7 MB disk10s1
2: Apple_HFS FW 02 1,2 To 1.2 TB disk10s2
3: Apple_HFS FW 02 200 Go 199.9 GB disk10s3
4: Apple_HFS FW 02 CS5MC 50 Go 49.9 GB disk10s4
5: Apple_HFS FW 02 Leopard 50 Go 50.0 GB disk10s5
/dev/disk11
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk11
1: EFI 209.7 MB disk11s1
2: Apple_HFS FC 02 Time Machine 1.0 TB disk11s2
3: Apple_HFS FC 02 SL 1To 999.5 GB disk11s3
/dev/disk12
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk12
1: EFI 209.7 MB disk12s1
2: Apple_HFS FC 01A USB 1To 700.0 GB disk12s2
3: Apple_HFS FC 01C 300 Go Leo 299.9 GB disk12s3
4: Apple_HFS FC 01B USB 1To 699.8 GB disk12s4
5: Apple_HFS Leopard 125 Go 300.0 GB disk12s5
/dev/disk13
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk13
1: EFI 209.7 MB disk13s1
2: Apple_HFS FW 04 TM 2To 2.0 TB disk13s2
3: Apple_HFS eDrive 12.9 GB disk13s3
/dev/disk14
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk14
1: EFI 209.7 MB disk14s1
2: Apple_HFS FW 05 2To 2.0 TB disk14s2
sys171064:~ OH$
As you and I see, I strongly believe that disk15s2 and disk16s2 (with s3, s4, s5 etc. partitions) are missing.
I must find a way to prove what I say to you. Remember that we are not in the case where I use *Cmd + s* after rebooting with Install DVD, but under normal utilisation. What follows has no interest :
Last login: Fri Nov 26 21:23:55 on ttys006
sys171064:~ OH$ sudo fsck -fy /dev/disk15s2
Password:
/dev/disk15s2: No such file or directory
Can't stat /dev/disk15s2
Can't stat /dev/disk15s2: No such file or directory
sys171064:~ OH$
So, I will now restart my MacBook Pro with Mac OS X 10.6.4 Install DVD, and go :
—1 in *Disk Utility* ;
—2 in Terminal (with *Cmd + s*).
I'll *note all* what I see, and then write you what I found.
You'll be nice to tell me if there's a way, in these conditions,
a) to *save Disk Utility log* ; or/and
b) to *save Terminal Output(s)* (.txt) ; or/and
c) to *take and save screenshots*, ; or/and
d) to *print anything*. (?)
as I don't know how it's possible to save these informations.
Thank you once more for your help. I'll do things now, but as it is 23:02 here in France, maybe I won't write you till tomorrow.
But, if you can answer to a), b), c) or d) above, post it to me please, because I'll go back here tonight.
And, also, *but I don't want to bore you*, I'd like to learn how to *copy and paste parts of messages* as you did, and how to *insert a Grab item (.png)* in a discussion, because an image is better than thousand words (that's what we say in France, but I'm sure we are not alone on Earth — like in the Universe).
With my best regards
Vialatte -
Saving Sequence and Effects Presets that go with the project itself
Hi, please be gentle as I'm a newbie to the site.
I have been asked to create several master Premiere Pro projects in CC (templates if you like) that will be being sent to quite a few ops worldwide, many of whom are completely new to the Adobe Platform, so I would like to keep things as simple as I can for them.
Is it possible to create sequence presets and a few effects presets that actually go with the project. At the moment when I've tried opening projects on another machine with a different user account, it overwrites everything with their presets and I can't find anything to stop that from happening. I'm assuming it's to do with sync settings.
However, is there a function to allow premiere pro to open the project with the project's last settings (sequence and effects presets) rather than default to the user prefs? As an aside, I'm not interested in workspace or keyboard shortcuts - that's down to them!
If it's not possible, is there a very simple step-by-step workflow I can use? But I'd really like to avoid trying to explain how to install sequence and effect presets to loads of different ops if I can!!
Finally (wrong forum I know) but I need to do exactly the same thing with the assocated After Effects master template projects, so any help on that would be gratefully received too.
ThanksWelcome to the forum!
When it comes to effects presets, you should be able to right-click on the Presets in the Effects bin and Export Presets...
The ops can then import the presets using the same method (right-click on the presets in the effects bin and choose Import Presets...)
For sequence presets, I can't find a way to do it within the software. Someone else will probably have to help you find it, but I'm certain there is a file somewhere in your computer that stores all of your Sequence Presets, so it would be a matter of finding and sharing that file with the ops, and then telling them where to put that file.
Hopefully this helps out a little bit! -
i bought a ipod 4th gen and when i try login in with my apple id it says my security pin is wrong but its the 1 from the card help!!
Contact iTunes. See the iTunes Store Account and Billing topic of:
Apple - Support - iTunes -
Initially, in entered the wrong appleID when is set up my iPhone and I can't seem to change it in the phone. I have tried to change all the options on the phone with no success. Can anyone help with this?
Apps will always have to updated using the account from which they were purchased.
-
I am running lion now and I am not able to safe my emails to the computer with the attachments. what's wrong?
Try using these settings: http://support.apple.com/kb/HT4864.
-
Having an intermittent issue where my iMac blanks out on me. On restarting I get several bands running down the screen with pixels jumping around within the bands, then the white screen of death and nothing... This happens intermittently and usually restarts OK. Happened again three days ago and wouldn't restart for two days (again the bands/pixels etc) but now operating fine? Any ideas whats wrong with my iMac and what the solution may be? Also gets very hot from time to time, particularly if I'm playing music/watching youtube/movies for extended periods. Mac is 3.5 years old, running OS X 10.6.8, processor 3.4 GHz i7 memory 8GB 1333 MHz DDR3
If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing. Use 2nd link if not near an Apple Store or aren’t in the US.
Genius Bar Reservation US
Authorized Service Provider -
My iPad 4 wifi 3G keeps charging slowly takes half a hour to get to 15% when plug into the wall with the plug and the lead what come with the iPad just wondering as I think some thing is wrong with the iPad
Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
Use the wall-mount charger that came with the iPad and charge overnight. Do NOT use an iPod/iPhone charger. Do NOT use a computer's USB port. Then, operate it normally until auto shut-down (ignore any low level alerts that may appear). An irony is that doing that test to determine the total operating time is also the procedure necessary to calibrate the battery level meter.
I'm not claiming that you do not have a problem. I am stating, however, that we don't yet know. If the above test does, in fact, indicate a problem, read this.
Also, according to Apple:
Use Your iPad Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge. -
How to pull the job with the latest effective date in PSFT?
Hello,
I am running the PSFT 9.1.1 connector workforcefullsync.
I ran into a problem when the user has multiple job records. Each time that the user job is updated, a new job record is created. So, when the data comes from PSFT, for a user, we have multiple jobs records with different effective date (For example <EFFDT IsChanged="Y">1996-10-21</EFFDT>). OIM is only interested in the latest EFFDT.
Question 1: is it something that we can set on the PeopleSoft side, so that only the job with the highest EFFDT is sent to OIM?
Question 1b: is this is not easy to accomplish from the PSFT side, can I use transformation in the connector to only pull the job record with the highest effective date?
Question 2: if the EFFDT shows a date in the future (HR wants to disable a person in the future), does OIM ignore this change until the sysdate is after that EFFDT date?
Thanks
PS: workforcefullsync worked fine if the file contains only 1 job per employee. When the xml files contain multiple job records, I got the error:
ERROR QuartzWorkerThread-1 OIMCP.PSFTER - oracle.iam.connectors.psft.common.handler.impl.PSFTWorkForceSyncReconMessageHandlerImpl : handleMessage
ERROR QuartzWorkerThread-1 OIMCP.PSFTER - 1
ERROR QuartzWorkerThread-1 OIMCP.PSFTER - Description : 1
ERROR QuartzWorkerThread-1 OIMCP.PSFTER - java.lang.ArrayIndexOutOfBoundsException: 1
Edited by: user12049102 on Mar 22, 2010 12:06 PMHello,
When the PSFT team sends a message over to OIM to disable a user with today's date, the user got disabled fine in OIM. A reconciliation event is created.
When the PSFT team sends a message over to OIM to disable a user with a future date for EFFDT, let's say 3/31/2010, no reconciliation event was created.
Does OIM store this information somewhere so that it will process it later on?
It's a good thing that OIM does not disable the user who has an EFFDT in the future, but we don't want that record to be forgotten.
Please help.
Thanks
Maybe you are looking for
-
some one help me
-
Restrict fields in advanced search
Hi, afaik you should be able to restrict the fields exposed to the user in the advanced search with R18. I am not able to find the place to configure this. Any hints? Thanks in advance Michael
-
WRT54G ROUTER CONNECTION PROBLEM
I have a WRT54g router. Everything works great for a period of time even after turning the computer, internet modem and router on and off several times. Then I turn everything on and the computer does not connect to the internet. It go and connect th
-
I have a problem with left joint sql/server GTxtSQL = " select E.*, CodFamille, LibFamille, CodSFamille, LibSFamille, " _ & " CodLocal, LibLocal, CodService, LibService, F.CodFourn, F1.CodFourn as CodFournSAV " _ & " from tp_Index_1 IX, t_Equip E, t_
-
Sending email comes back saying sent folder is full and the email doesn't get sent,except sometimes
Hi, two problems: 1. When i send an email i get an error message saying "sent folder is full ..." and the email doesn't go through. Except if i send myself a test it works. Help? 2. IN my stored folders the subject remains for many files but the cont