A year ago I paid to update my Pages. If I click on the doc on the desktop the old Pages opens up and I can't save my work. Help!
A year ago I paid to update Pages to 4.1. If I click on a Pages doc on the desktop the old Pages opens up and I can't save my work and so I lose what I do. So for a year I have been remembering to open Pages using the icon on the bottom of the desktop and all is OK. But when my work is being reviewed and resent to me, then I have problems with opening that file and saving those changes. So I have been coping and pasting the resent work to me and putting it into a new doc.
So today wanting to fix this annoying problem and reading something on this forum I went into applications and moved a Pages something that was in Applications into the iwork 09 file. A pop up box asked if I wanted to replace the old Pages with the newer version and I clicked Yes.
Now I can't open up any of my Pages work on the desktop.
I have not shut down my laptop and restarted - would this solve the problem?
I am not going to panic - just yet ... but can anybody help!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 for 64 GB one and $99 for the other 4Gs. They do not fix yours. The cracked screen voids any warranty you had on the iPod.
Apple - iPod Repair price
Similar Messages
-
I need help with finding which Iphoto to download for my computer.
Depending on your computer and system you'll have to purchase an iLife 09 or 11 disc from a 3rd party retailer like Amazon.com or eBay.com. Be sure to check the system and hardware requirements before ordering.
iLife '09: System requirements
For iLife 11
System Requirements
Mac computer with an Intel processor.
GarageBand Learn to Play requires a Mac with an Intel Core Duo processor or better.
AVCHD video from supported video cameras requires a Mac with an Intel Core Duo processor or better. Visit the iMovie ’11 Supported Cameras page for additional details.
1GB of RAM.
Approximately 5GB of available disk space.
DVD drive required for installation.
Display with at least 1280 x 768 pixel resolution.
Mac OS X v10.6.3 or later. -
Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It tells Adobe doesnT support my System. But I can not update my old version or activate it. What can I do?
The mac you want to install photoshop cs2 on is running mac os x 10.6.8 Snow Leopard?
(photoshop cs2 won't run on intel macs with mac os x newer than snow leopard)
Did you ever have cs2 installed on this particular computer before?
If the problem is that you already installed cs2, but it won't activate, that's because adobe took the activation servers offline for some older adobe products such as cs2.
You'll need to use the non activation version of cs2 from here and the supplied serial number:
Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products -
Trying to update my apps but the Apple ID is wrong. Changed it in settings and rebooted. Still didn't work.
You need to delete them and then download them from the correct Apple ID. This may require repurchasing paid applications.
(94094) -
I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. -
When i try to do a software update, it finishes and then says that the update cannot be saved because it has probably been corrupted during the download. This has happened a number of times and i do not know why, any help?
asifmanzoor wrote:
i have 10.7.2, this download is 10.7.5
Are you Downloading it from here > http://support.apple.com/kb/dl1582
asifmanzoor wrote:
yes, i am using wifi
1) Turn your Wi-Fi router OFF... wait 30 seconds... Turn it back ON.
OR...
Do not use Wi-Fi and connect Directly to your Internet via ethernet cable. -
My wife and I share the same apple id, we just updated our iphones. When we were asked if we wanted to share the same apple id for icloud we said yes, now our phones can't face time, please help?
Read http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
If you wish to share an Apple ID with family members then read: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/ -
I upgraded my MacBook Pro with Lion (but with iphoto 9.2.1) to Maverick and now I can't open iphoto and I can't update either - can anyone help please?
Download the iPhoto upgrade from the App Store. It should be free.
iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform. -
Hi, I just updated my mac from version10.6 to 10.9.3 os mavericks. i went to open iPhoto and it says "Your photo library will not be readable by previous versions of iPhoto after the upgrade." does this mean I have lost all photos i had in there? It does not give me a choice, it just says quit or upgrade? p.s. i didn't realise ther was a way to back up my computer beforehand, which i am guessing this is time machine?
1. No, you haven't.
2. Back up the iPhoto library(this can be done through Time Machine or by dragging it to a drive, partition, or disk image formatted as Mac OS Extended) and then click Upgrade.
3. Aside from Time Machine and drag-copying items from your home folder, programs such as the Disk Utility, Carbon Copy Cloner, and SuperDuper can make backups.
(108026) -
I just updated to OS X Yosemite Version 10.10.3 because After Effects CS6 would't open anymore. But it still does't work.
Does anyone know what to do?
Please in simple English, because I'm from Germany.
Thx.Thank you so much, Mr. Curtis! I'm not sure exactly how that worked, but it allowed me to get back on both AE and Premiere Pro. 10 points to you!
Also, for the other people that may have similar problems and are viewing this forum, definitely try this out. Listen to Jim's advice, don't use the most recent version (which is currectly 5.5.47) - instead try a slightly older one. The one I had installed was version 5.5.24.
Once again, thank you! You saved my project! -
my computer is telling me i do not have permission to access the requested resource to update my iphone 5 to the new ios 7. why is it telling me this and how can i fix it, I have updated itunes and everything
I saw this post at about 2:05 becasue I had the same problem. I just tried it again and now the update is downloading! just wait it out. I had to wait about 3.5 hours.
-
After downloading the updates for Premier Elements 12 I got the following error message U44M1P7. What does this mean and how can I correct it. Thanks.
glennpsychdoc
What computer operating system is your Premiere Elements 12 running on? I suspect Mac because of the name your error.
Please read the following Adobe document with the details and fix for error U44M1P7
ATR Premiere Elements Troubleshooting: PE12: 12.1 Update Released
Specifically open the following link in the above
Update 12.1 installation errors | Photoshop Elements, Premiere Elements
Please let us know if that works for you.
Thank you.
ATR -
Updated photoshop cc and I can't save files now
Updated photoshop cc and I can't save files now
No, but before anyone can help you, you'll need to tell us what version of Photoshop you are using, and what your new update status is. Plus we need to know what your operating system is.
[edit]
Whoops. Just noticed that you mention CC, so I guess you are talking about 14.1. So what is your OS? -
Updated Apple ID- the iCloud is still autopopulating my other ID email address and I can't change it from my iCloud, iPhone or anything. I've updated my Apple ID through my PC, and iTunes Store, but it will not populate and I am losing my mind. This is ridiculously frustrating
If you still have access to your old email address, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email account and verify it. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. You can now go to Settings>iCloud and sign in with your correct iCloud ID and password.
If you don't have access to your old email address, you will have to contact Apple to have them reset the password so you can disable Find My iPhone and sign into your iCloud account. You can either go to https://expresslane.apple.com, select "More Products and Services", then "Apple ID", then on the next page select "Other Apple ID Topics", then "Lost or forgotten Apple ID password" and click "Continue"; or you can contact Apple Support (http://www.apple.com/support/icloud/contact/). -
I just updated my iPhone to iOS 7.1 and I can't save any new bookmarks does anybody know what to do?
I need help I just updated my iPhone to iOS 7.1 and I can't save new bookmarks on safari what can I do to fix it?
Read this:
http://help.apple.com/iphone/7/#/iph42ab2f3a7
Maybe you are looking for
-
Illustrator CC 64-bit application hangs
I'm getting Illustrator CC application hangs on a win 7 system after opening up a file or even select a tool or path in files that were previously created in Ai CC, even hours before. Also getting the following errors when a file has been finally ope
-
How do I change the default PDF reader from Acrobat Pro to Preview?
Right now Acrobat Pro is set as the default PDF reader in my Safari 3. It's slow and wonky, which I think might be a 10.5 issue. Anyway I'd like to make Preview my default PDF reader for Safari but I can't find where to make this change.
-
dear guru's Trans code MCTA, when i Create new sales order Incoming orders, Open orders updated correctly after doing Delivered (VL01N, LT03, VL02N, VF01) the Incoming Orders stays, Sales updated. Open Orders should reduce but is not.in MCTA can u pl
-
Not all folders appear as available for LR4 import
I just installed LR4 and went to Import into a new catalogue. Only a portion of my image folders on my main drive appear. When I look at my on-site backup drive, they are all available. The backup is, as you might expect, a dupe of the originals.
-
User exit in Production Confirmation
Hi Experts, I need to fill the a custom pallet table when the material document is created in transaction CO11N. And I need to do few validations and if those fails I need to reverse the material document. I found few user exits with the material doc