A1000 phase taking too long while upgrading from R12.2.0 to R12.2.4

Hi
I am running the final R12.2.4 upgrade patch (patch# 17919161), and it is presently running the A1000 phase. Its been over 10 hours now it is stuck at the same phase. I have installed R12.2.4 a couple of times now but this is the first time it is taking so long to finish.
Looking at the workers using adctrl, it gives the following output. Anyone knows how to expedite this processing?
        Control
Worker Code      Context            Filename                    Status
     1 Run       Generic R120       QPXCONAT.pll                Running
     2 Run       Generic R120       QPXPTMAP.pll                Running
     3 Run       Generic R120       QPXFMLMT.pll                Running
     4 Run       Generic R120       QPXQPCDT.pll                Running
     5 Run       Generic R120       QOTLNSRF.pll                Running
     6 Run       Generic R120       QPXQPCUR.pll                Running
Regards
Kabeer

Never mind. Here's the resolution:
Step1. Use adcrtl utility to quit all the workers in 'running' status
Step2. Drop table applsys.FND_INSTALL_PROCESSES
Step3. Restart patch application using ADOP utiloty with parameter "restart=yes"
So now the patch application has resumed.
Regards
Kabeer Khan
www.aclnz.com

Similar Messages

Ios 7 taking too long to download from iTunes

Iam an iPad mini user.i am trying to download and update to ios7 software.but is taking too long(10 hours) and shows no sign of decrease.so what is the solution to this?

It should not take so long.
Try reset iPad and work from there.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

SAP IDES Installation u2013 Import ABAP Phase taking too long issue

Hello,
I have been trying to install IDES ECC 6.0 on a dektop with 3.2GB RAM and intel pentiumD, I have tried thrices and whenever it reaches IMPORT ABAP phase it takes so long that I often have to cancel and restart.
THe current installation has taken more than 20 hours and I am still on that phase, the status message for over 24hrs is as follows:
u201Cphase is in progressu201D
u201CImport monitor jobs: running 3, waiting 16, completed 0, failed 0, total 19
My database is MS SQL Server 2005.

Hi,
Welcome you post on the forum. However, this particular forum is for SAP Business One System Administration. It is not related to ECC.
Please find a proper forum to post.
Thanks,
Gordon

RMAN - upgrade catalog taking too long

Hello ,
I am trying to upgrade the rman catalog and it is taking too long to upgrade , infact after 4 hours wait time it is still excuting the upgrade command .
Target database is : 11.2.0.3 PSU1
catalog database : 11.2.0.2
upgrading the rman catalog to 11.2.0.3 .
I tried executing the command at a very quiet time of the day when catalog is not been used by any database . Please advice if you have encountered the similar issue and fixed it .
Thanks
Venkat

After some time into execution of "upgrade catalog" i got the output as below , and after that i let all the jobs of rman execute completely from diff databases that are connected to catalog and re-executed the "upgrade catalog" command , which finally completed the upgrade process with out the issues .
Error :
RMAN> upgrade catalog;
error creating upgcat_strt_0
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-06004: ORACLE error from recovery catalog database: ORA-00060: deadlock detected while waiting for resource
Re-executed when no sessions are connected to catalog and the upgrade process is successful .
RMAN> connect catalog rman/rman@database
connected to recovery catalog database
PL/SQL package RMAN.DBMS_RCVCAT version 11.02.00.02 in RCVCAT database is not cu
PL/SQL package RMAN.DBMS_RCVMAN version 11.02.00.02 in RCVCAT database is not cu
RMAN> upgrade catalog;
recovery catalog owner is RMAN
enter UPGRADE CATALOG command again to confirm catalog upgrade
RMAN> upgrade catalog;
recovery catalog upgraded to version 11.02.00.03
DBMS_RCVMAN package upgraded to version 11.02.00.03
DBMS_RCVCAT package upgraded to version 11.02.00.03
Thanks
Venkat

Upgrading from R12.1.1 to R12.1.2

Hi,
I have the following configuration:
Oracle Enterprise Linux:5.3
EBS Version:R12.1.1
Database version:11.1.0.7
OracleAS 10g Forms and Reports:10.1.2.3.0
OracleAS 10g: 10.1.3.4.0
Please explain is it recommended to upgrade all Tech stack Components before upgrading from R12.1.1 to R12.1.2
I am upgrading from R12.1.1 to R12.1.2 without upgrading any tech stack components, as it requires minimum versions and R12.1.1 tech stack components are supporting those versions
Can i go ahead on production after applying it on test
will it create any problem, if i could upgrade tech stack components later, will it be a problem for me
Please explain...
Thanks,
Alig
Edited by: user12257829 on Aug 17, 2010 12:30 AM

Hi
Hussein
While Upgrading from R12.1.1 to R12.1.2 faced many errors(Applied 8502056 patch) and then applied 7303033
first adrelink failed.
1. An error occurred while relinking application programs.
Continue as if it were successful [No] : Yes
but i entered Yes to continue as my OS is OEL 5.3 binutil version is binutils-2.17.50.0.6-9.el5
as my system binutil is updated one but in the note at MOS 758831.1, binutils-2.17.50.0.6-6.0.1.el5.x86_64.rpm, this doesnt apply to my system as my binutil is updated one.
2. The following Oracle Forms objects did not generate successfully:
au resource OKLCSASD.pll
An error occurred while generating Oracle Forms library files.
Continue as if it were successful [No] : Yes
as i entered yes to continue with the patch and tried to compile OKLCSASD.pll thru adadmin and manully aslo but didnt succeed.
The patch is completed atlast, and a huge number of invalid objects where created ..
I tried to recompile thru admin,utlrp,adcompsc.sql & utl_recomp.recomp_parallel but unable to compile a single objects
How could i make sure that patch is applied successfully & recompileinvalid object
find below invalid objects
BIS_MEASURE_SECURITY_PVT
BIS_INDICATOR_REGION_PVT
BIS_TARGET_LEVEL_PVT
BIS_ACTUAL_PUB
ENG_ECO_PUB
BIS_PMF_REG_SERVICE_PVT
ENGECOBO
AS_SALES_LEAD_OPP_PVT
BISVIEWER_PMF
BIS_PMF_DEFINER_WRAPPER_PVT
IES_TELESALES_BP_PKG
OKL_REVERSE_CONTRACT_PVT
OKL_CONTRACT_PVT
OKL_AM_PARTIES_PVT_W
OKL_AM_CREATE_QUOTE_PVT_W
OKL_AM_REPURCHASE_ASSET_PVT_W
OKL_AM_RESTRUCTURE_QUOTE_PVT_W
OKL_AM_SEND_FULFILLMENT_PVT_W
OKL_SPLIT_ASSET_PVT_W
OKL_TRX_QUOTES_PUB
OKL_CONTRACT_REBOOK_PUB
OKL_AM_TERMNT_QUOTE_PUB
OKL_TXL_QUOTE_LINES_PUB
OKL_TRANSACTION_PUB
OKL_ACTIVATE_ASSET_PVT
OKL_GENERATE_ACCRUALS_PVT
OKL_ASSET_DETAILS_PVT
OKL_AM_ASSET_DISPOSE_PVT
OKL_ACTIVATE_IB_PVT
OKL_AM_PROCESS_ASSET_TRX_PVT
OKL_AM_QA_DATA_INTEGRITY_PVT
OKL_AM_PARTIES_PVT
OKL_AM_ASSET_RELOCATION_PVT
OKL_AM_UTIL_PVT
OKL_AM_ASSET_RETURN_PVT
OKL_BLK_AST_UPD_PVT
OKL_CONTRACT_BOOK_PVT
OKL_KBK_APPROVALS_WF
OKL_COPY_ASSET_PVT
OKL_AM_CONSOLIDATED_QTE_PVT
OKL_AM_CREATE_QUOTE_PVT
OKL_AM_CALCULATE_QUOTE_PVT
OKL_CS_CREATE_QUOTE_PVT
OKL_CS_WF
OKL_CURE_CALC_PVT
OKL_EQUIPMENT_EXCHANGE_PVT
OKL_FUNDING_WF
OKL_INTEREST_CALC_PVT
OKL_LA_JE_PVT
OKL_CREATE_KLE_PVT
OKL_LCKBX_CSH_APP_PVT
OKL_LIKE_KIND_EXCHANGE_PVT
OKL_AM_BTCH_EXP_LEASE_LOAN_PVT
OKL_AM_LEASE_LOAN_TRMNT_PVT
OKL_AM_LOAN_TRMNT_PVT
OKL_LOSS_PROV_PVT
OKL_AM_LEASE_TRMNT_PVT
OKL_MASS_REBOOK_PVT
OKL_MISC_TRANS_PVT
OKL_QA_DATA_INTEGRITY
OKL_AM_QUOTES_WF
OKL_CONTRACT_REBOOK_PVT
OKL_CURE_RECON_PVT
OKL_RELEASE_PVT
OKL_REV_LOSS_PROV_PVT
OKL_AM_REPURCHASE_ASSET_PVT
OKL_AM_RESTRUCTURE_RENTS_PVT
OKL_AM_RESTRUCTURE_QUOTE_PVT
OKL_AM_RECYCLE_TRMNT_PVT
OKL_AM_PROCESS_RV_TRX_PVT
OKL_AM_RV_WRITEDOWN_PVT
OKL_AM_SEND_FULFILLMENT_PVT
OKL_LA_STREAM_PVT
OKL_SPLIT_CONTRACT_PVT
OKL_SPLIT_ASSET_PVT
OKL_AM_SV_WRITEDOWN_PVT
OKL_AM_AMORTIZE_PVT
OKL_TRANS_CONTRACTS_PVT
OKL_AM_TERMNT_QUOTE_PVT
OKL_CS_TRANSFER_ASSUMPTION_PVT
OKL_TRANSACTION_PVT
OKL_VARIABLE_INTEREST_PVT
OKL_GENERATE_ACCRUALS_PUB_W
OKL_VP_K_ARTICLE_PUB_W
OKL_AM_CONSOLIDATED_QTE_PUB_W
OKL_AM_CREATE_QUOTE_PUB_W
OKL_TRX_QUOTES_PUB_W
OKL_CONTRACT_REBOOK_PUB_W
OKL_AM_REPURCHASE_ASSET_PUB_W
OKL_AM_RESTRUCTURE_QUOTE_PUB_W
OKL_AM_SEND_FULFILLMENT_PUB_W
OKL_SPLIT_ASSET_PUB_W
OKL_TRX_ASSETS_PUB_W
OKL_TRX_CONTRACTS_PUB_W
OKL_TRANS_CONTRACTS_PUB_W
OKL_TXL_QUOTE_LINES_PUB_W
OKL_TRANSACTION_PUB_W
AST_UWQ_WRAPPER_PKG
OKL_AM_CNTRCT_LN_TRMNT_PVT
OKL_CS_PRINCIPAL_PAYDOWN_PVT
OKL_SERVICE_INTEGRATION_PVT
OKL_AM_TERMINATE_INV_AGMT_PVT
OKL_AM_TERMNT_INTERFACE_PVT
CSC_ACTION_ASSEMBLER_PVT_W
OKL_AM_SYSTEM_PARAMS_PUB
OKL_VENDOR_AGREEMENT_PUB
OKL_AM_INTEGRATION_PVT
OKL_PERIOD_SWEEP_PVT
OKL_SEC_AGREEMENT_PVT
OKL_VSS_WF
OKL_SSC_WF
OKL_AM_SYSTEM_PARAMS_PUB_W
WSH_IB_TXN_MATCH_PKG
WSH_RCV_CORR_RTV_TXN_PKG
WSH_IB_UI_RECON_GRP
OKL_AM_BAL_WRITEOFF_PVT
OKL_VP_SYNC_CR_PVT
OKL_CREDIT_LINE_WF
OKL_PROP_TAX_ADJ_PVT
OKL_PROCESS_PPD_PVT
OKL_LA_SALES_TAX_PVT
OKL_AM_TERMNT_VENDOR_PRG_PVT
OKL_AM_VENDOR_RES_SHARE_PVT
OKL_MULTIGAAP_ENGINE_PVT
one thing important while generating .pll/.fmb thru adadmin it asks for FND_INSTALL_PROCESSES & AD_DEFERRED_JOBS to be dropped, if we select to drop it will drop this tables and patch process will not continue if these tables were dropped and created for .pll/.fmb generation
How to avoid this & to apply patch cleanly
Thanks,
Alig
Edited by: user12257829 on Aug 19, 2010 3:56 AM
Edited by: user12257829 on Aug 19, 2010 3:59 AM

Iam using 3015 network printer. while iam printing from word it is taking too long to print

Respected sir,
I am using 3015 printer. when ever i give print it is taking too long time nearly 1 minute . there is no problem with the network

Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). You can find the DHCP range of the router using its internal settings page or in its manual. Use the CD that came with your router or type the router's IP address (ends in .1) into a browser.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I shut down when an upgrade was taking too long yesterday, now Itunes will not open today

I shut down when an upgrade was taking too long yesterday, now Itunes will not open today

Hello James,
Thank you for using Apple Support Communities!
From what you are describing, I have 2 recommendations. First, troubleshoot for 3rd party plugins that may be causing an issue after the interrupted update:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/kb/TS3430
If the issue persists after followign the article, I would next download iTunes from the download page, and install it.
http://www.apple.com/itunes/download/
Take care,
Sterling

HT201274 i tried to erase all content and reset settings from the device option.it is taking too long and its been 15 hours but not yet done.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.

i tried to erase all content and reset settings from the device option.it is taking too long and its been 15 hours but not yet done.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.

nabidhadi wrote:
.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.
You iPod has been jail broken. Unfortunately you are on your own here. I can offer that you need to find out which method and software was used to JB.
Good luck...you're gonna need it....

Moving the 80 Million records from Conversion database to System Test database (Just for one transaction table) taking too long.

Hello Friends,
The background is I am working as conversion manager and we move the data from oracle to SQL Server using SSMA and then we will apply the conversion logic and then move the data to system test ,UAT and Production.
Scenario:
Moving the 80 Million records from Conversion database to System Test database (Just for one transaction table) taking too long. Both the databases are in the same server.
Questions are…
What is best option?
IF we use the SSIS it’s very slow and taking 17 hours (some time it use to stuck and won’t allow us to do any process).
I am using my own script (Stored procedure) and it’s taking only 1 hour 40 Min. I would like know is there any better process to speed up and why the SSIS is taking too long.
When we move the data using SSIS do they commit inside after particular count? (or) is the Microsoft is committing all the records together after writing into Transaction Log
Thanks
Karthikeyan Jothi

http://www.dfarber.com/computer-consulting-blog.aspx?filterby=Copy%20hundreds%20of%20millions%20records%20in%20ms%20sql
Processing
hundreds of millions records can be done in less than an hour.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Recently i noticed that the sound is not comming from my i phone 4s so i needed to restore it as it was earlier. So i decided to do it by restoring it without itunes. Now it is taking too long to restore it. Can anybody Tell me what problem i am facing???

recently i noticed that the sound is not comming from my i phone 4s so i needed to restore it as it was earlier. So i decided to do it by restoring it without itunes. Now it is taking too long to restore it, it is still going on since 3 hours . Can anybody Tell me what problem i am facing???

Which software did you use to restore it, if you didn't go with iTunes?

What will happen if i leave the wifi area while downloading ios 7 software? the download is taking too long and i need to go somewhere

ive been trying to download for hours now and its taking too long, i have places to go but i dont want to leave the wifi area if it will harm my iphone and the ios7 software isn't finished downloading...

I think you can stop the download without any harm coming to your phone. But if it is actually installing and not just downloading, I would let it finish.

Database open (recovery) taking too long

Hi,
Ive been using your awesome BerkeleyDB Java Edition for a couple of years, and have been very happy with it.
I am currently facing an issue with trying to open the database after a disk-full issue (which resulted in the database being unable to write, and hence not closed properly).
While recovery seems to be operating, it has been taking an inordinate amount of time - 16 hours so far. My database has data of around 200GB, which inflated to over 450GB during deletion of entries, hence gobbling up all free space on disk.
My questions are:
* Should i continue to wait for recovery?
* Is there any chance that recovery is looping?
* Is there an easier way (DBDump?) to extract data from the database without having to perform recovery?
Some other information that may help:
* The recovery has decreased the size of the last significant file, and created 3 new files since it started running.
* I have been monitoring the open files (using lsof), and they change every now and then to other files, though a good amount of its time is spent near the end of the database.
Thus, i feel like recovery is running normally, just taking too long. Please let me know your opinion.
A few other things i should mention regarding my issue:
* The database was, till yesterday, running on bdb java 3.3.75. After running several hours of recovery, i upgraded to 4.1.10 (since i read about a possible recovery looping bug in one of the versions)
* Once 4.1.10 started recovery, it spat out errors regarding the last 2 files. Only on deleting those 2 files (the last being 0 bytes, the 2nd-last being about 5k) did the recovery start. Note that the older 3.3.75's recovery never complained about those files. I can post the errors here if relevant.
* Some of the jdb files (about 500 files out of the 47,000 files that make up the database) are 100 MB files, since i had experimented with larger sized files for a few days, then reverted the setting.
Would any of these above affect a successful recovery?
My setup is:
OS:Linux CentOS 5.2, 64-bit, kernel 2.6.18-92.el5
JVM: Sun Java 1.6.0_20, 64-bit
Memory: 16 GB RAM, of which 8 GB is allocated to the java process (-Xmx8000M -Xms8000M)
BDB cache set to use 6GB RAM (envconfig.setCacheSize(6000000000))
Only the BDB basic API is being used (Environment, database, cursors). We do not use DPL, or HA features.
Awaiting your kind response,
Sushant A

Hi Sushant,
* Should i continue to wait for recovery?* Is there any chance that recovery is looping?>
I'm not aware of a bug that would cause recovery to loop, however, you may want to take thread dumps to see if it is progressing. It isn't easy to tell, however, since each phase of recovery is in fact a loop. What you can tell easily from the thread dumps is whether recovery is blocked (completely stopped) for some reason. I don't know of a bug that would cause this, but it's something I would check for.
Assuming it is not blocked, I suggest that you leave recovery running, and additionally (in parallel) try to obtain some information about your log. While recovery is running you can run the DbPrintLog utility, which does not itself run recovery. I suggest running the following command, which will tell us in general what your log looks like and in particular how far apart the checkpoints are:
java -jar je-x.y.z.jar DbPrintLog -h <envHome> -S > <output>Please post the output.
If checkpoints are not running in your application for some reason, or they are running very infrequently, this can cause VERY long recoveries. Unfortunately, you may have such a problem in your app and not be aware of it, until you crash and have to recover. To guard against this sort of thing in the future, you should keep an eye on the checkpoint frequency. EnvironmentStats.getNCheckpoints and getEndOfLog can together be used to tell how much log is written between checkpoints. We will also be able to see this from the DbPrintLog -S output.
* Is there an easier way (DBDump?) to extract data from the database without having to perform recovery?DbDump normally runs recovery. DbDump with the -r or -R option does not run recovery, but has other drawbacks. With -r, a large amount of memory may be necessary to dump an accurate representation of your data set. If this fails because you run out of memory, -R can be used, but this will dump multiple versions of each record and it will be up to you to interpret the output.
If regular recovery does not succeed, then DbDump -r is the next thing to try.
Would any of these above affect a successful recovery?No, I don't believe so.
--mark

AirPlay Screen Mirroring (Mavericks) disconnects frequently with "Feedback taking too long to send" message

My company has several TVs with AppleTVs (3rd generation units) connected in our conference rooms so we can "Screen Mirror" our Mac laptops via AirPlay during meetings. Many employees have complained that AirPlay Screen Mirroring drops frequently during meetings for no apparent reason.
In attempts to determine the cause of the issue, I removed the AppleTV units from Wi-Fi and hard-wired them all to the LAN (100Mbps/Full duplex, no switchport errors seen on the Cisco switch). I upgraded the AppleTVs to the latest firmware. I had our AppleTV users ensure they were running MacOS Mavericks with the latest software updates installed. I had the Mac laptops hard-wired into the LAN during meetings in the conference rooms. None of these changes resolved the AirPlay issue.
I reviewed the MacOS "/var/log/system.log" file from the laptops of several users that reported issues. I found a pattern that seemed to indicate that the "coreaudiod" process reported "Feedback taking too long to send" several times before the AppleTV connection was terminated. Also, from a network trace (using "tcpdump") taken during an unexpected AirPlay Screen Mirroring disconnection, I could see that the Mac laptop sent a TCP FIN packet to the AppleTV unit (this would indicate that the MacOS laptop initiated the closing of the AirPlay connection).
I have included the relevant log file entries below. Please note that the LAN internal to our company is "solid" and there have been no connectivity issues detected or reported during the times the AirPlay sessions were disconnected.
I believe I have found a workaround to this issue. By going into "System Preferences", "Sound" and then changing the "Output" device BACK to the "Internal Speakers" (rather than the AirPlay destination), the AirPlay Screen Monitoring connection seems to remain stable.
My questions are:
- is anyone else experiencing this type of problem? any other solutions recommended?
- is there a way to change the AirPlay defaults so that Screen Mirroring only sends the video (not audio)?
- does anyone know what the log file entries indicate (like, what does "Feedback taking too long to send...." mean)?
- any fix planned for this issue?
From: "/var/log/system.log":
Jan 16 10:50:16 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:16.454404 AM [AirPlay] ### Feedback taking too long to send (1 seconds, 1 total)
Jan 16 10:50:18 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:18.524517 AM [AirPlay] ### Feedback taking too long to send (4 seconds, 2 total)
Jan 16 10:50:20 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:20.533639 AM [AirPlay] ### Feedback taking too long to send (6 seconds, 3 total)
Jan 16 10:50:22 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:22.548168 AM [AirPlay] ### Feedback taking too long to send (8 seconds, 4 total)
Jan 16 10:50:24 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:24.554522 AM [AirPlay] ### Feedback taking too long to send (10 seconds, 5 total)
Jan 16 10:50:24 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:24.554809 AM [AirPlay] ### Report network status (3, en0) failed: 1/0x1 kCFHostErrorHostNotFound / kCFStreamErrorSOCKSSubDomainVersionCode / kCFStreamErrorSOCKS5BadResponseAddr / kCFStreamErrorDomainPOSIX / evtNotEnb / siInitSDTblErr / kUSBPending / dsBusError / kStatusIsError / kOTSerialSwOverRunErr / cdevResErr / EPERM
Jan 16 10:50:26 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:26.545531 AM [AirPlay] ### Feedback taking too long to send (12 seconds, 6 total)
Jan 16 10:50:28 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:28.559050 AM [AirPlay] ### Feedback taking too long to send (14 seconds, 7 total)
Jan 16 10:50:30 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:30.628868 AM [AirPlay] ### Feedback taking too long to send (16 seconds, 8 total)
Jan 16 10:50:32 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:32.655638 AM [AirPlay] ### Feedback taking too long to send (18 seconds, 9 total)
Jan 16 10:50:34 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:34.641952 AM [AirPlay] ### Feedback taking too long to send (20 seconds, 10 total)
Jan 16 10:50:36 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:36.659854 AM [AirPlay] ### Feedback taking too long to send (22 seconds, 11 total)
Jan 16 10:50:38 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:38.653594 AM [AirPlay] ### Feedback taking too long to send (24 seconds, 12 total)
Jan 16 10:50:40 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:40.659279 AM [AirPlay] ### Feedback taking too long to send (26 seconds, 13 total)
Jan 16 10:50:42 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:42.745549 AM [AirPlay] ### Feedback taking too long to send (28 seconds, 14 total)
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.532853 AM [AirPlay] ### Endpoint "AppleTV" feedback error: -6722/0xFFFFE5BE kTimeoutErr
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533151 AM [AirPlay] ### Feedback failed: -6722/0xFFFFE5BE kTimeoutErr
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533273 AM [AirPlay] ### Error with endpoint "AppleTV": -6722/0xFFFFE5BE kTimeoutErr
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533427 AM [BonjourBrowser] Reconfirming PTR for AppleTV._airplay._tcp.local. on en0
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533588 AM [BonjourBrowser] Reconfirming PTR for 9C207BBD8EA1@AppleTV._raop._tcp.local. on en0
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533839 AM [AirPlay] ### AirPlay report: Network dead for 10+ seconds after 159 seconds, screen, nm "AppleTV", tp WiFi, md AppleTV3,1, sv 190.9, rt 0, fu 0, rssi -54
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.534104 AM [AirPlay] ### Report network status (5, en0) failed: 1/0x1 kCFHostErrorHostNotFound / kCFStreamErrorSOCKSSubDomainVersionCode / kCFStreamErrorSOCKS5BadResponseAddr / kCFStreamErrorDomainPOSIX / evtNotEnb / siInitSDTblErr / kUSBPending / dsBusError / kStatusIsError / kOTSerialSwOverRunErr / cdevResErr / EPERM
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.534315 AM [AirPlay] Deactivating virtual display stream for quiesce
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.543682 AM [AirPlayScreenClient] Stopping session
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.543815 AM [AirPlay] Quiescing endpoint 'AppleTV'
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.543907 AM [AirPlayScreenClient] Stopping session internal
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.544218 AM [AirPlayScreenClient] Stopped session internal
Jan 16 10:50:44 My-MacBook-Pro.local AirPlayUIAgent[985]: 2014-01-16 10:50:44.544266 AM [AirPlayAVSys] ### Quiesce AirPlay
Jan 16 10:50:44 My-MacBook-Pro.local SystemUIServer[159]: 2014-01-16 10:50:44.544297 AM [AirPlayAVSys] ### Quiesce AirPlay
Jan 16 10:50:44 My-MacBook-Pro.local SystemUIServer[159]: 2014-01-16 10:50:44.553084 AM [AirPlayAVSys] ### Quiesce AirPlay
Jan 16 10:50:44 My-MacBook-Pro.local AirPlayUIAgent[985]: 2014-01-16 10:50:44.554904 AM [AirPlayAVSys] ### Quiesce AirPlay
Jan 16 10:50:44 My-MacBook-Pro.local SystemUIServer[159]: 2014-01-16 10:50:44.557604 AM [AirPlayAVSys] Ignoring route away when AirPlay not current
Jan 16 10:50:44 My-MacBook-Pro.local AirPlayUIAgent[985]: 2014-01-16 10:50:44.560307 AM [AirPlayAVSys] Ignoring route away when AirPlay not current
Jan 16 10:50:44 My-MacBook-Pro.local WindowServer[89]: Display 0x04280880: GL mask 0x21; bounds (0, 0)[1920 x 1080], 62 modes available
Jan 16 10:50:44 My-MacBook-Pro.local WindowServer[89]: GLCompositor: GL renderer id 0x01022727, GL mask 0x0000001f, accelerator 0x00004ccb, unit 0, caps QEX|MIPMAP, vram 2048 MB
I am happy to provide more information if needed.
Thank you.
-Tim

I'm currently still experiencing this as well. I've confirmed it occurs on 10.9.1, 10.9.2, and 10.9.3 on MacBook Pro Retina's, Mid-2012 and 2013 MacBooks. It happens on multiple ATV's not just one, all are updated to 6.1.1 and a simple reboot seems to fix it temporarily but it does come back. All the ATV's are connecting to the network via Wireless not Ethernet. These are 3rd Gen ATV's but I checked the serial number and these do not match the bad batch of Apple TV's from 2013 that were offered up for Replacement for Apple due to the bad firmware update. None of the computers have the Firewall turned on. Here's the two logs that we always find after the issue occurs (logs are recent, happened this morning):
5/30/14 8:57:36.017 AM coreaudiod[183]: 2014-05-30 08:57:36.016946 AM [AirPlay] ### Feedback taking too long to send (30 seconds, 17 total)
5/30/14 8:57:36.332 AM coreaudiod[183]: 2014-05-30 08:57:36.331492 AM [AirPlay] ### Feedback failed: -6723/0xFFFFE5BD kCanceledErr
The user will get disconnected from Airplay anywhere between 30 seconds to 3 minutes after logging on and can reconnect but then once again get disconnected after the same time period. One interesting thing to note is that when the Feedback Taking Too Long to send error starts occuring and the countdown to disconnect start ticking down to 30, its solely referring to Audio not being sent over the network and Video is working just fine. If I try to play sound I get another log and the sound doesn't play through the speakers. After a reboot, sound works fine and the Feedback Error's do not show up. I've also tried switching to Internal Speakers (since it defaultly switches to Airplay Speakers) after connecting to Airplay and seeing the Feedback timer start in the Console Logs but even after that the log continues to saw its taking too long to send and disconnects in 30 seconds.
This issue has been ongoing for months, I've got a ticket logged as far back as January with this occuring but its infrequent enough that we've just restarted and moved on. I'd say its an issue that occurs to about 5%-10% of meetings but that's an entire meeting that doesn't have the ability to Airplay until someone comes down and reboots it.
I don't often post in this forum but its still an active issue with no resolution, proof that its occuring on other people's systems, and no firmware updates having been released to correct it. It'd be nice to know of any workarounds other than having to buy some lamp timers for each conference room just to get a functional ATV or putting up a sign that says hey if you get disconnected every 3 minutes, reboot the ATV. The whole reason we're using Apple products is for ease of use otherwise I'd put together a much cheaper solution myself. Any help or recommended troubleshooting steps would be fantastic at this point.

Elements 10 reinstall taking too long

I've been trying to reinstall Elements as I've recently upgraded my laptop. The download says it's taking anywhere from 6 to 21 hours!! I've tried it three times on three seperate days on both Chrome and IE and it always ends with the message "the download was taking too long and was stopped by the network". When I try to restart it it restarts from scratch, making it imposssible to ever complete the download. How can I reinstall Elements? I'm downloading from Thailand, is there a special server I should be connecting to?

What is your current Bandwidth?
Try from Adobe.com, and use the "In-Cognito Window" (Ctrl+Shift+N) in Chrome, (When you go to www.adobe.com, Choose - UnitesStates English, if it asks you)
Cheers
LP

Data manager jobs taking too long or hanging

Hoping someone here can provide some assistance with regard to the 4.2 version. We are specifically using BPC/OutlookSoft 4.2SP4 (and in process of upgrading to BPC7.5). Three server environment - SQL, OLAP and Web.
Problem: Data manager jobs in each application of production appset with five applications are either taking too long to complete for very small jobs (single entity/single period data copy/clear, under 1000 records) or completely hanging for larger jobs. This has been an issue for the last 7 days. During normal operation, small DM jobs ran in under a minute and large ones taking only a few minutes.
Failed attempts at resolution thus far:
1. Processed all applications from the OLAP server
2. Confirmed issue is specific to our appset and is not present in ApShell
3. Copied packages from ApShell to application to eliminate package corruption
4. Windows security updates were applied to all three servers but I assume this would also impact ApShell.
5. Cleared tblDTSLog history
6. Rebooted all three servers
7. Suspected antivirus however, problem persists with antivirus disabled on all three servers.
Other Observations
There are several tables in the SQL database named k2import# and several stored procedures named DMU_k2import#. My guess is these did not get removed because I killed the hung up jobs. I'm not sure if their existence is causing any issues.
To make the long story short, how can I narrow down at which point the jobs are hanging up or what is taking the longest time? I have turned on Debug Script but I don't' have documentation to make sense of all this info. What exactly is happening when I run a Clear package? At this point, my next step is to run SQL Profiler to get a look into what is going on behind the scenes on the sql server. I also want to rule out the COM+ objects on the web server but not sure where to start.
Any help is greatly appreciated!!
Thank you,
Hitesh

Hi ,
The problem seems to be related to database. Do you have any maintenance plan for database?
It is specific for your appset because each appset has own database.
I suspect you have to run an sp_updatestats (Update Statistics) for your database and I think the issue with your jobs hang will be solved.
DMU_K2_importXXX table are coming from hang imports ...you can delete these tables because it is just growing the size of database and for sure are not used anymore.
Regards
Sorin Radulescu

A1000 phase taking too long while upgrading from R12.2.0 to R12.2.4

Similar Messages

Maybe you are looking for