A1145 imac g5 isight, freezes after 2-5 mins and then there no power from keyboard and mouse. Changed HDD and no luck and on the install page it freezes. You have to force it to shutdown and leave it for 5-10 minutes and try to turn it on again AHT Passed

A1145 imac g5 isight 2.1GHz
, freezes after 2-5 mins and then there no power from keyboard and mouse. Changed HDD and no luck and on the install page it freezes.
You have to force it to shutdown and leave it for 5-10 minutes and try to turn it on again
Apple HardWare Test Passed
10.5.11
Orginal DVD's 9.2

Could be a heat problem.
Also, try these:
Resetting the SMU on a G5 iMac:
http://support.apple.com/kb/HT1767
and on resetting the PMU on a Power Mac G5, G4 and G3 :
http://support.apple.com/kb/HT1939?viewlocale=en_US
http://support.apple.com/kb/HT1436

Similar Messages

  • I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you ad

    I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you advise?  During installation emptied cache, etc. Backed up using time machine, fortunately.

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    5. Reinstall Yosemite from Scratch:
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • I may have deleted some system files from my computer due to my antivirus and now my imac won't start. Actually it does, and then there is a blank screeen with the apple logo and it shuts down right away. is tehre a possibility of recovering my files?

    Hello
    I was having some problems with my Imac, for a while it was slow and often disconneceted from my wifi, while this one worked perfectly (tested with other devices)
    I thoug i might have a virus, so i downloaded an antivirus (mac keeper) and started checking.
    I also did a scan of my computer using Console or something from the utilities, and then a folder popped witha  file I had canceled a while ago. I canceled the file and then my Imac continued to be slow.
    i then restarted my Imac, but when it started, the usual grey logo of Apple appeared, and then it shut down suddently.
    I tried to reboot it holding the command key and R but nothing, and then i tried holding the shift key and a bar appeared, and at half of the bar it sut itself down again.
    I think it is probably a preoblem because I may have cancelled some of the system files from a folder called "private" in the "documents" folder.
    Is there any way I can recover some of my files? maybe all of them? I hope so because I have some important files there
    Is this a thing I can do myself or do Ineed to go to a MacStore to repair it? Will I need to change HD or just to format it and reinstall? also if there is any way i can recover some of my files that would be great.
    Thanks
    Ludo
    P.S. problems appeared when i installed the Mavericks version.

    If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
    Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
    An Internet connection will be required (wired or wireless).
    At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
    Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk.

  • TS3391 iMovie 11 is not working. I try to open it and it says it is generating thumbnails for one of my previous projects. All the commands are gray. I have to force it to quit. I just want to capture clips to start a new project.

    iMovie 11 is not working. I try to open it and it says it is generating thumbnails for one of my previous projects. All the commands are gray. I have to force it to quit. I just want to capture clips to start a new project. I googled the problem and there were discussions about deleting files in various folders and renaming clip extensions. I don't like the solutions I saw there and I am not sure they will work.

    Nobody replied so I called Apple. They seemed to think they could fix the problem but I had to agree to pay about $20 first. I told them to put it down as a complaint. I only want to use the software I bought. I can't see that it is my fault it is malfunctioning. I guess I will have to pay. It doesn't seem right.

  • I want to create and then email holiday cards from my iMAC.  All I can find are IOS apps.  Are then any OS X apps to do this?

    I  want to create and then email holiday cards from my iMAC, preferably in spanish but english would be OK.  All I can find are IOS apps.  Are then any OS X apps to do this?  Thanks!

    Two apps that I have that do different types of greeting cards.
    The Print Shop Pro.
    Swift Publisher
    And, if I remember correctly,  the free image editor, Gimp, has templates for different greeting cards, also.

  • I can't find isight under the software, also, i tryed to restart  and still  the camra not working. do you have alink to download isight?

    i can't find isight under the software, also, i tryed to restart  and still  the camra not working. do you have alink to download isight?

    Click on the Apple symbol in the top left of the screen and select About this Mac. Click on More Info and scroll down to the USB entry under hardware. Does it list the 'Built in iSight' in the top right hand pane?
    If it does, what happens when you run the Photo Booth application?

  • When I open another tab I get the wheel of death for 1-2 minutes and I often have to force quit FF. Mac OS X 10.6.8/ FF 7.0.1

    I have Mac OS X 10.6.8 using FF 7.0.1. When I open another tab I get the wheel of death for 1-2 minutes and I often have to force quit FF. I saw this question asked but no real answer given as to why this has been happening in the last three weeks after I've used FF for years and not had this problem before. Please give some help or I'll have to use Safari full time.

    Delete and reinstall it.
    (104030)

  • 3 year old iMac 24 running OS10.7.4.  After it has been on for a day or so, it stops going to sleep and becomes very slow.  This only happens when Safari is running. Quitting Safari solves the problem.  Has anyone else have the same problem?

    3 year old iMac 24 running OS 10.7.4.  After it has been on for a day or so, it stops going to sleep and becomes very slow.  This only happens when Safari is running. Quitting Safari solves the problem.  Has anyone else have the same problem?  Does not happen on MacBookpro only on iMac.

    Hello Albert, see how many of these you can answer...
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab, are there a lot of Pageouts?

  • My 2nd gen. ipod freezes after a few min. of use and shuts down completly and restarts itself.. ive reset it several times..help!

    after turning on my ipod any app i go into will freeze after a few min. and after a while it will turn off and restart by itself

    Have you tried restoring the iPod from an older backup?
    If that doesn't work try restoring it to factory settings.
    See this article for information on backing up and restore your iPod.
    http://support.apple.com/kb/ht1414
    B-rock

  • Often for no apparent reason the computer crashes and nobody available to any command (keyboard or mouse), the images disappear. I am forced to shut down and restart the computer.

    often for no apparent reason the computer crashes and nobody available to any command (keyboard or mouse), the images disappear. I am forced to shut down and restart the computer.

    open console in Applications>Utilities, check the system log for the date/time of the last problem for clues.

  • My ipad is unresponsive.  The screen is black and I have followed the instructions to turn the iPad on.  I charged it for about 20 minutes and tried again, following the same instructions and there was still no response.  How do I get my ipad to turn on?

    My ipad is unresponsive.  The screen is black and I have followed the instructions to turn the iPad on.  I charged it for about 20 minutes and tried again, following the same instructions and there was still no response.  How do I get my ipad to turn on?

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Satellite L350D Works for a few minutes and then completely stop

    Hi all!
    I am having a weird problem with my laptop Satellite L350D-216
    I've used it for a long time in a row and starts to show some strange vertical lines at the screen and kind of loose focus and then it went completely black
    Since then if I switch off and leave for a few hours it switches on normally and work for 5/10 minutes and goes black again.
    It happens after I was working on it for about 20 hours straight or so (might be related)
    What i did tried:
    -Switch on only with the battery
    -Switch on only with the AC
    -Take all off and hold off key for 1 min and then try again both above
    When it does switch on everything seems to be working 100% without problem but doesnt last more then 10 minutes as I said
    Any ideas?
    Thanks in advance

    Hi Horwath and Pau Pau,
    First of all thanks for trying to help.
    This morning I've open the laptop and clean it the cooler completely (was full of dust) and it is now working full speed.
    What I've noticed however is that the problem seems to be worsening. Today, even before the cleaning, when I switch on the computer after a whole night of i got the blank screen straight away. So I couldn't test it at BIOS as you guys ask me too, however yesterday, even before posting here, I've tried something similar and the black screen came after a few minutes as if i was using windows.
    You think the GPU is faulty?
    And, if the answer is yes, is it worthy/possible to replace? How much it would cost?
    Any further test I could do to make sure the problem is at the GPU?
    Thanks again
    Amantino

  • I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

    I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't, and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

    Try leaving it plugged in and then restart the computer.
    If you are on Windows this link may help but it is a bit old.
    http://www.technologynext.org/error-usb-device-not-recognized-how-to-fix/

  • Time Machine on my iMac won't open iPhoto. It goes to desktop screen automatically. When I select User/Picture/Iphoto library it only brings up the preview page with the size of the folder. I can't get into the library to look for lost photos.

    Time Machine on my iMac won't open iPhoto. It goes to desktop screen automatically. When I select User/Picture/Iphoto library it only brings up the preview page with the size of the folder. I can't get into the library to look for lost photos.

    Thank You. This helps me alot to get into the masters and to see events and photos in a utilitarian way, but it is not as easy as viewing the normal iphoto format to find photos.  Can I do something else or did I not do something right to not see normal iphoto in Time Machine ?

  • I have iPad 2 with version 8.1.1.  When trying to delete apps, the icons 'jiggle' but won't delete, then neither the home button or the power button  will work. i have to leave it for 10-15 minutes until it returns to 'normal'

    I have iPad 2 with 8.1.1.  When trying to delete apps, the crosses appear, the icons 'jiggle' but won't delete, then neither the home button or the power button will work, and I have to leave it for 10-15 minutes until it returns to 'normal'.  This has happened the last four times i tried to delete an app.

    Hi OldPete71$$$... You are not alone. I am taking my iPad3 to the Apple store later today - I had to wait to get an appointment - for this very problem. This error did not occur until I updated to 8.1.1. I have not tried letting the device sit, I have been doing a hard reboot to recover functionality. If it's any consolation, I *can* delete apps through the iTunes interface, it's just very sloooooow. I can't delete internet shortcuts that I've stored on the home screen this way, though.

Maybe you are looking for

  • Can not deploy Federation Manager 7.0 (http 500 error)

    Hi, I am trying to install Sun Java System Federation Manager 7.0 on SunOS 5.8 sparc machine, and never get any further after build the federation.war file Basically, I use standard script to build the war file ./fmsetup install -s fmsilence-template

  • BPM worklist app views are not visible in IPM task viewer

    Hi, we upgraded our system from 11.1.1.3.0 to weblogic 10.3.5.0 SOA 11.1.1.5.0 with BPEL processes ECM with IPM and UCM 11.1.1.5.0 after upgrade i have problem with profiles in IPM task viewer page. Views are created in BPM worklistapp and all users

  • PDF Files (with links) on inDesign template. Help, please?

    I put together a weekly newsletter for our company and one of our customers provided me with an ad that has hyperlinks. The ad is in a PDF format. Anyway, when I convert the newsletter (with said ad) from inDesign to a PDF format, the hyperlinks that

  • Please help me in ABAP coding for the incoming transactional data

    Hi I have the following transactional data Transaction ID-  Buyer- Seg- Fam- Cla -Com-Total 00001 - AB co - Engineering - Machinery - Equipment - Mechanical -15000 00002 - AC co - Engineering - Machinery - Equipment - Mechanical -15850 00003 - DE co

  • What do I do when I receive an Internal Server Error?

    Dear Gurus, Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [email protected] and inform them of the time the error occurred, and any