A1321 battery for MacBook Pro Mid 2009

So the title says it all. I have a mid 2009 15" MacBook Pro and have already purchased one faulty battery from a less than reputable site. It's just impossible to find the battery for this critter.
Has anyone purchased an after market battery and had good luck with it? If so what company?
I wish Apple still made batteries for this model of machine. It has a lot of life left in it.
The battery is a 'A1321'.
Cheers

Thanks for all your inputs. I finally gave up searching on the web for a new generic or genuine battery a month back. While I hate paying apple prices (considering how much I have spent on apple products for the last 30 years) I finally figured this bloody mac book pro 15 has paid for it's self 1000 times over, and I didn't want to blow it up by being to much of a cheap ***. It has eaten 9 solid months of my life over the last 3 years, but allowed me knowledge untold and access in a way that is understandable to me. I paid $180 to have some quack 'authorised repairman' spend 5 minutes popping one in from apple that probably cost $17 in China to make. (I could have installed it blindfolded). I gave it a new color case and magnetic charger as well, and came to realise it had actually well earned that $300 to bring it back to life. Maybe mac machines do have a 'soul' of their own. Funny ol' world eh?

Similar Messages

  • HT4241 Will this work for Macbook Pro (mid 2009) laptop

    Will the mini display port to HDMI adapter work for Macbook Pro (mid 2009) laptop.  I mean, will both audio and video be transmitted through the same adapter.

    See
    About Mini DisplayPort to HDMI adapters
    iMac (Late 2009), MacBook Pro (Mid 2010), MacBook (13-inch, Mid 2010)- HDMI audio doesn't work with some adapters

  • Buy new battery for MacBook Pro Mid 2010, and in-store installation?

    I need to buy a new battery for my MacBook Pro Mid 2010. I was wondering if there was an Apple store where I can buy a new one and have it installed there. i tried Best Buy and they weren't really any help and suggested to go to an Apple store. However, I don't know if I could have them install right there.

    its best to make an appointment at your local Apple store.  If they are busy and you walk in without an appointment, they will turn you away.

  • Any Mini DisplayPort to HDMI adapter with audio for macbook pro mid 2009

    connecting MacBook Pro (15-inch, Mid 2009) to Hisense TV with audio?!?!!?
    hello everyone.
    if anyone is familar with successfully getting the older macbook pros that dont support audio out to stream and preform digital audio on a TV or has any helpful information that will get me familiar with trying to successfully stream audio and visual. and can PLEASE HELP ME in any way to understand what they know and teach me how to solve my problem id really appreciate it.
    i want to connect my MacBook Pro (15-inch, Mid 2009) to my Hisense LED LCD TV, ModelNumber:40H3E  and getting digital audio sound from my TV as well as video, but have no clue on how or where to even start to successfully pairing the two and getting sound.
    I own a MacBook Pro (15-inch, Mid 2009) this MacBook model doesnt support an HDMI port. My MacBooks model has the Mini Displayport which supports video out but does not support audio out. Can someone help me by telling me exactly which Mini DisplayPort to HDMI adapter with audio will support my model MacBook Pro (15-inch, Mid 2009) and exactly what HDMI wire do i need to buy that will successfully preform digital audio and sadisfying quality visual through TV?
    i have NO expierence with the proccess have NO knowledge about any of this or these Mini DisplayPort to HDMI adapters with audio. i have no idea what kind of adapter and HDMI cord to buy that will give me sound from my tv for my type of macbook. '
    im not familar AT ALL with any of this so i hope me giving you my MacBook Pros make and model and my TV's model number will be enough information for someone to help me.
    just please give me anything you can on this topic
    thank you so much,

    With a 2009 MacBook Pro, you need to use two connections to your TV: one for video and another one for audio.  The miniDisplayPort on the 2009 models does not support audio, so you need a separate audio cable:
    miniDisplayPort adapter for video - I use the Apple miniDisplayport-DVI adapter + a DVI-HDMI cable like this one
    audio cable for audio - use a 3.5mm male stereo-to-2xRCA male cable like this one
    Connect the miniDisplayport adapter + DVI/HDMI cable to your MacBook Pro's miniDisplayPort output and the HDMI input on your TV
    Connect the audio cable to your MacBook Pro's audio out and your TV's audio in
    The only potential gotcha is if your Hisense TV requires audio via the HDMI cable when you use an HDMI cable.  The H3e user manual is unclear about this.

  • Inaccurate readings about battery in MacBook Pro (mid 2009)

    I am currently getting inaccurate readings about my battery. After, my Macbook says its fully charged at 100%, it switches to 76% after I take the charger out. I have replaced the battery and the AC adapter. There must be something internal must be going on? What is the problem?

    wrong forum
    http://www.apple.com/support/macbookpro
    will get you started and Lion Community
    in windows you'd do chkdsk + ccleaner
    in Lion use the Recovery mode partition
    might want to backup, erase, clean Lion OS and import, something like Setup Assist is to Win Easy Transfer

  • Replacement HD for my MacBook Pro Mid 2009?

    Hello
    I have a MacBook Pro Mid 2009 15" that crashed and failed on me, and I'll need to have the internal hard drive replaced. I'll be passing on this computer to my mom after it's repaired.
    Is there a specific internal hard drive I have to get that fits my MacBook? because I noticed on BestBuy that some are 2.5" and others are 3.5". Are there ones that work better with some Apple products and some don't? What would you recommend me?
    Any help or recommendations would be appreciated! Preferably something from BestBuy or FutureShop carries. My budget is $90 - $125.

    Also - the one I'm looking at and like is a 2.5" ... Does this matter? Will it fit properly in my Macbook?
    This one - http://www.newegg.ca/Product/Product.aspx?Item=N82E16822178340

  • How to improve macbook pro mid 2009

    i got Macbook pro mid 2009 with processor speed 2.26GH and memory 2GB and storage of 159GB. running maverick 10.9.4
    Its slow and battery do not last more than hour.
    Any suggestions?
    is it worth upgrading it or buy new one.

    That model has a max possible RAM fo 8GB (two 4GB modules). As long as you are not doing anything heavy-duty, 4GB (two 2GB modules) is probably OK for Mavericks. I have on MBP running Mav on 4GB with no indications it is struggling for more RAM.
    Only buy RAM from a trusted Mac RAM reseller. I use Other World  Computing (their RAM listings for your model are here):
    http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3
    Crucial.com is also good. Avoid Kingston ValuRAM. It has never been happy in Intel Macs. You will get the right RAM from either vendor. Can't say that for brick-n-mortar electronics stores. Too hard to find one with a resident geek who speaks Mac.
    Installation is an easy do-it-yourself task; all you need is the right screwdriver. Handy video here:
    http://eshop.macsales.com/installvideos/macbookpro_13_unibody/
    As for the battery, there is a built-in utility that will show the current condition. Click and hold on your Apple menu. Hold down the OPTION key and the first item with change to System Information. Launch it. When it comes up. find "Power" in the left-hand contents pane and select it to get a battery report.      Looks like this:
    Copy the information I've outlined in red and paste it into a response to your thread here. Those numbers describe the current condition of the battery.

  • How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?

    How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
    My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
         -I have a flashdrive with win7 on it.
         -I mounted the ISO of win7 with toast for bootcamp to do its thing.

    Good luck.
    Consider this a bump so that hopefully someone with better news spots your thread.
    Allan

  • Negotiated Link Speed on MacBook Pro mid-2009 with Kingston SSDNow v300

    Hi,
    I have a mid-2009 MacBook Pro (13") with Kingston SSDNow v300 SSD drive with Mavericks OS X installed.
    I've noticed from different forums that many users have the same problem that I have: SSD drive's Negotiated Link Speed is only 1,5 Gbps, although MacBook Pro mid-2009 should support 3 Gbps speed.
    My system has EFI 1.7 firmware update (MBP55.00AC.B03) installed in and System Info says that 3 Gbps Link Speed should be possible:
    NVidia MCP79 AHCI:
      Vendor:    NVidia
      Product:    MCP79 AHCI
      Link Speed:    3 Gigabit
      Negotiated Link Speed:    1.5 Gigabit
      Physical Interconnect:    SATA
      Description:    AHCI Version 1.20 Supported
    Many users have tried to reset NVRAM and SMC and I have also done these steps, but with not any improvement.
    Some users have mentioned that MacBook Pro mid-2009 has a poor SATA ACHI chipset (NVidia MCP79) and SATA III SSD drives won't work on SATA II speed unless SSD drive is forced to work on SATA II speed by firmware update or by some tweaking tool. Is there this kind of tool available for Kingston SSDNow v300?
    One user says that he got 3 Gbps Negotiated Link Speed on Mountain Lion, but after installing Mavericks, speed dropped to 1,5 Gbps (https://discussions.apple.com/message/23549859#23549859).
    So, is there any way to get Negotiated Link Speed to work on 3 Gbps on Kingston SSDNow v300 with MacBook Pro mid-2009 (for example by installing an older version of Mac OS X) or do I have to buy a new SSD drive from another manufacturer to get 3 Gbps Negotiated Link Speed to work on my machine?
    If the last option (to buy a new SSD drive) is the only option, would it be wise to look for an older model, a SATA II drive, (maybe OCZ Vertex 2) to get 3 Gbps speed?
    Thanks!

    Hi
    I was just as frustated as you after installing the Kingston v300.  I mean it's a solidly built drive with the reliability of kingston (I've been using their RAM for years and years in my desktop PC without problems).  Unfortunately, for a the last 3 months I had it in my 2009 unibody white macbook, it was stuck at link speed 1.5.
    I've been searching in forums since then without any solution.  Even the update for bios is not available for my model.
    I just tried the SMC reset after reading the blog.
    http://thenextweb.com/lifehacks/2010/12/04/how-when-why-to-reset-the-pram-smc-on -your-mac/#!w3XEY
    On reboot, everything seemed faster, so I checked the negotiated link speed and it was at 3 instead of 1.5!  Yay!  Then I checked the disk transfer speed on Blackmagic Disk speed test and it roughly doubled from 138 to 260MB/s.  Now, I'm not going to shutdown or restart...
    I hope this post is useful for people like me stuck at 1.5 Gbps speed.  Good luck

  • How to make a MacBook Pro (mid 2009) work properly with a 3M Streaming projector?

    Ok, so I have a MacBook Pro (mid 2009), a 3M Streaming projector and very annoying problem.
    When I connect my MacBook Pro with a Mini Displayport to HDMI adapter to the 3M projector, I get a pink tint, like a filter over the image, it’s very frustrating.
    This are the tests I’ve done:
    1. I tried the adaptor and the projector on a different (more recent) Mac -> It worked fine.
    2. I tried connecting my MacBook Pro to a different not HDMI but VGA projector -> It worked fine.
    3. I used some Terminal code I found on the web to force the Mac to send RGB signal, don’t know if that has anything to do with it, but I tried anyway -> Didn’t work
    So I’m confused, it’s not the physical port of my MacBook cause it worked fine with a VGA projector, It’s no the 3M projector and it’s not the Mini Displayport to HDMI adaptor cause it worked fine on a different Mac.
    So what is it?
    I’m totally desperate, I haven’t been able to solve this problem, so if you guys can help me you will be my heroes.
    Thanks.
    – 13" MacBook Pro (mid 2009) runing Mavericks.
    – 3M Streaming projector Powered by Roku.

    Yes as Clinton says this is correct.
    I've used a Sata to USB connector which is only a few pounds instead of an enclosure for the clone, but then I wasn't keeping mt old HDD. But that's an option if you don't need it.
    I also use Carbon copy cloner as this will clone your recovery partition as well. Apples disk utility will also clone drives but I'm not sure that it copy's the recovery partition.
    I highly redomend my Samsung 840 pro 256Gb - it's about the fastest drive you'll get (nearly) but is backed by Samsung's unrivaled SSD reliability and 5 year warranty. I've also used an 840 basic model on an older macbook and was equally pleased.
    Crucial's drives are reliable mac friendly drives but are somewhat slower on the write speeds vs the 840 Pro.
    I'd avoid OCZ drives due to so many failures across their range although they do have great reviews and some models just edge the Pro on speed although it's fairly negligible.
    As Clinton says, avoid the Samsung Evo drive. I wanted to buy this drive as it is a great drive - but there are many users that have had compatibility issues with it when installed in a Mac. This may rectified on a future firmware update possibly, but until it's proven I would avoid it for now.

  • I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my 10.6.8 back

    I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my previous 10.6.8 back ... hope there is a way to do so

    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.

  • Macbook pro mid 2009, yosemite 10.10.2 bootcamp installation windows 7 problem

    i have a macbook pro mid 2009 and yosemite 10.10.2 installed. my bootcamp is 5.1.3 and i cant install windows 7. every time i create the usb installer and restart the mac to install windows the usb installer dont appear. what i do?
    I try to make a uefi usb installer but The screen frozen when i click on efi boot

    Your Mac has (or used to have) a built-in Optical drive. You need a physical DVD for Windows and a USB2 flash drive for BC drivers. Bootcamp Info.plist modifications cause more problems than they resolve.
    Your Mac is also not UEFI compliant, late 2013+ Macs are the first ones to be, so EFI boot will not work.
    From the un-modified Bootcamp Info.plist file...
            <array>
                    <string>MacBook7</string>
                    <string>MacBookAir5</string>
                    <string>MacBookPro10</string>
                    <string>MacPro5</string>
                    <string>Macmini6</string>
                    <string>iMac13</string>
            </array>
            <key>PreUSBBootSupportedModels</key>
            <array>
                    <string>MacBook7,1</string>
                    <string>MacBookAir3,2</string>
                    <string>MacBookPro8,3</string>
                    <string>MacPro5,1</string>
                    <string>Macmini4,1</string>
                    <string>iMac12,2</string>
            </array>

  • No audio after Mountain Lion 10.8.3 update Macbook Pro Mid 2009

    A few days ago I downloaded some updates for Mountain Lion on my Macbook Pro Mid 2009. After that there is no sound and internal speakers are not listed as an output device. The startup sound is still working (I would guess it uses the same speakers?) but nothing else makes a sound through the speakers. Also headphones are working. I'm not 100% sure if my OS version vas 10.8.2 before the update or not.
    I have tried to input the headphones in and out many times to make sure that no microswitches are stuck. Also I have reset SMC and NVRAM/PRAM and reinstalled Mountain Lion. I even installed Lion (10.7.0) to be sure but it still won't work.
    Any help would be appreciated.

    Make a "Genius" appointment at an Apple Store.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • MacBook Pro mid 2009 HDD to a Kingston SSD SATA drive - Problems

    Hi
    I own a MacBook Pro Mid 2009 and I'm running OSX Mavericks with Windows 8.1 Pro Bootcamp.  I wanted to upgrade to an SSD drive and after reading the great reviews on Amazon, I purchased a Kingston 240GB SSD 2.5" V300 SATA 3.
    Many of the buyers had installed the SSD drive on Macbook Pro, including "mid 2009' models without any real problems but I've just spent the best part of 3 hours trying to install the drive but so far, it has not worked and the problem seems to be that, although the Acronis True Image software that comes with the drive to 'clone' the source drive and install it onto the destination drive (new SSD drive), I get a message which states, "WARNING:  After migration, the O/S will not be able to boot from the destination disk in the BIOS - If you want to boot from the destination disk after migration, you need to enable UEFI booting in your system and then restart".
    During one of my first attempts to install the SSD drive, I removed the original HDD from the MBP and installed it in the supplied 2.5" caddy and and connected it to the MBP via the USB cable supplied then installed the new Kingston SSD SATA3 drive in the MBP, powered up and then rebooted.  The Acronis bootable software launched and after choosing 'clone disk', cose source and destination drives, I got a message saying:  "The selected disk will be migrated as is (disks layout will remain GPT)".  "After operation completion, operating systems will not boot from the destination disk in the BIOS".
    My system has the latest available Boot ROM Version (MBP.00AC.B03 and the SMC Version is 1.47f2 and as far as I am aware, Apple computers have no BIOS that you can access like on Windows computers and instead use EFI instead.
    Both drives had Extended Journaled GUID Partitions on them and what baffles me is that other buyers of these Kingston SSD SATA3 drives appear to have managed to install the SSD drive, but I've had to give up.
    I would really like to get the SSD drive working but so far I've failed.  Any advice would be appreciated and I'll try it out before reluctantly returning the drive for refund.

    Hi
    Thanks for your reply.
    Yes the Acronis software is Windows but I read through a lot of reviews on the Kingston SSD SATA 3 drives Amazon and from what I can gather, after removing the original drives and installing that in the 2.5" caddy and then installing the new SD drive in the Macbook, those buyers then used the software to boot from and clone the source drive to the new drive.
    I'm not sure if I mentioned it in my first post, but I did use the Disk Utility in Mac OSX and erased, formatted and partitioned the drive and then pushed CMD + R at start up but I was not able to install a copy of the OS because the drive was not recognised.
    I think I also used the disk utility in Windows and then tried again in OSX but no luck.  I'm no expert but as stated above, the issue seems to be that the SSD drive is not booable in the BIOS (or Mac equivalent).
    The SSD drive is SATA 3 and I'm sure that the SATA ports are SATA 1 on my MBP and maybe that the problem Perhaps someone can confirm this. 

  • I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

    i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
    did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
    thanks for your help

    It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Source means the external old drive. Destination means the new internal drive.

Maybe you are looking for