A205-S5825 with Realtek HDAudio missing MonitorInput
Hello there,
My problem is that there is no sound coming from the speakers when speaking at the microphone. I can record my voice, but cannot speak and listen simultaneously... As far as I know there should be an option named Monitor Input in the Levels tab of the Speaker Properties in Windows Vista... However - I am missing such option...
Any help would be greatly appreciated...
Similar Messages
-
A205-S5825 Dvd-Rom not working after reinstall
My hard drive on my A205-S5825 recently failed and I took it in for repair. After a couple of weeks I got it back with a new hard drive and everything seemed fine. I went to play a disc in my rom drive and I realize it cannot be found. It's not in the peripherals list under my computer. It shows up in my device manager, and this is the info it gives me there.
"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
I think it might be as simple as the device driver was never installed upon my reinstall. Problem with that is Toshiba does not seem to offer the proper driver for download, they have a bunch of other stuff, but no dvd-rom drivers.
I am running a system on Windows Vista, 32 bit I believe. The drive is a TSSTcorp TS-L632H ATA
Has anyone experienced this problem? Can anyone point me in the right direction as to where to find the driver or a possible fix?
Solved!
Go to Solution.Satellite A205-S5825
The solution in KB929461 will fix that.
-Jerry -
Re: Satellite A205-S5825 - DV Camcorder not recognized by firewire
I have a Satellite A205-S5825 and I cannot get it to recognize my Canon DV camcorder connected by a firewire cable.
The same camera works perfectly with my desktop PC. My wife also has a Satellite, an A215 and this does not recognize the camcorder either. All 3 computers are running XP service pack 3.
Can anyone throw any light on this? I would really like to use my laptop for video editing as my desktop is at another location.
Thanks in advance
600It is really strange. I would like to know if this will happen with factory settings.
I have camcorder too and I have tested it now with Vista preinstalled P200 and WXP preinstalled Satellite Pro P300.
On both notebooks the cam is recognized properly and I was able to record short movie.
I really don't understand what is wrong there but try to remove firewire port from device manager and restart your notebook.
The firewire port will be recognized and installed automatically. After doing this connect your cam and test it again. -
Hi,
I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
So basically here are my 2 questions:
How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
Any solutions are very much apreciated!
Thanks!
I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays. -
My mail won't load via iCloudonmy desktop. It comes up with the message "Missing resources". My network is working properly and I've checked Apple's reporting system to see if any systems are down (they are not). I am asked to submit the report to Apple (which I have)...but how do I correct this error sothat I can access my mail via iCloud on my desktop iMac?
Here is the error message information: DOES THIS HELP ANYONE FIGURE OUT WHAT IS HAPPENING? All other iCloud Services work.
IS FATAL
true
APPLICATION NAME
mail
TITLE
Mail could not be loaded
MESSAGE
There was a problem loading the application due to a possible network error or missing resources. Please try again.
LOG
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: MAIL in main()
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: Creating local CK.User object
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: Creating local CK.AccountPreferences object
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: --> Request 1: POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875, headers: Content-Type=text/plain, body: (omitted)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Eastern"}
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: SC.Object:sc1473:dispatch('load content')
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: SC.Object:sc2647:dispatch('noContent')
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: -> entering "6.2.2 No Content"
Tue, 17 Mar 2015 15:35:30 GMT: WARN: REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
Status:0
Request:/wm/preference
Wmsid:null
Redirect Count:1
Timeout Redirect Count:1
ResponseText:
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: --> Request 2: POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875, headers: Content-Type=text/plain, body: (omitted)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Eastern"}
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
responseText: ,
this._redirectCount: 1
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: <-- Response 2: 0 (84ms), headers: body: (empty)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: <---------------- Request in: /wm/preference-list-->1426606530328/1,httpStatus: 0,round trip time: 85ms, wmsid: null
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: retrieveResponseError:
ServerPreferencesDataSource.retrieveResponse
error:-1/0
guid:serverPrefsGuid
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: Bootstrap error: Preferences.RefreshError
TYPE
server
APP STATECHART
SC.Statechart:sc1031
initialized: true
name: cloudos-statechart
current-states: [
active.application.displayingCurrentApp
state-transition:
active: false
suspended: false
handling-event: false
BUILD NUMBER
15B.169e9f7
TIME
Tue Mar 17 2015 11:35:32 GMT-0400 (EDT) (1426606532298)
HOST
www.icloud.com
USER AGENT
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
DSID
1018646875
ENVIRONMENT
PROD
RECENT LOG MESSAGES
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: MAIL in main()
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: Creating local CK.User object
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: Creating local CK.AccountPreferences object
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: --> Request 1: POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875, headers: Content-Type=text/plain, body: (omitted)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Eastern"}
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: SC.Object:sc1473:dispatch('load content')
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: SC.Object:sc2647:dispatch('noContent')
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: -> entering "6.2.2 No Content"
Tue, 17 Mar 2015 15:35:30 GMT: WARN: REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
Status:0
Request:/wm/preference
Wmsid:null
Redirect Count:1
Timeout Redirect Count:1
ResponseText:
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: --> Request 2: POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875, headers: Content-Type=text/plain, body: (omitted)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Eastern"}
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
responseText: ,
this._redirectCount: 1
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: <-- Response 2: 0 (84ms), headers: body: (empty)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: <---------------- Request in: /wm/preference-list-->1426606530328/1,httpStatus: 0,round trip time: 85ms, wmsid: null
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: retrieveResponseError:
ServerPreferencesDataSource.retrieveResponse
error:-1/0
guid:serverPrefsGuid
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: Bootstrap error: Preferences.RefreshError -
Hi,
I have installed OER-11g version 11.1.1.7 and am successfuly able to open Asset Editor , ImpExp utility and also could harvest SOA and OSB components.
Issue 1:
However while trying to open the Navigator of the harvested components in OER console, a new window opens with two sections ( top and bottom). The top one which is a diagram view doesn't open with an error - Missing required permissions attribute in main jar: http://localhost:7101/oer-web/applets/components.aler-thinkmapclient-11.1.1.7.0.jar.
Please find the screenshot below.
Issue #2 : While trying to browse for the Assets from OER console. The below error is seen ( missing permissions for components.jexplorer-11.1.1.7.0.jar)
Could someone direct me on how to solve this issue. Appreciate your help !
Thanks and regards,
Sridhar.It works for me after I did a small tweak by as mine is a demo install.
Idea - is to make an security exception for the OER url in Java control console
Steps to do that :
1.Go to the control panel and uninstall the 64 bit version of Java
Open Programs and Features and select the 64 bit version of Java and select Uninstall.
2.Open up the Java Control Panel
Found as an option in the standard windows control panel
3.Check the version by clicking on the About Tab
If this is not what you expected you can go to java.com and download the latest version.
4.Click on the Security Tab in the Java Control Panel
5.Click on the Edit Site List button in the lower RH corner of the control panel
6.Add your URL to be allowed
Enter the full path that you use to access this such as https://myequallogics.com or the IP address if that is how you access it (as in http://192.168.0.100 - Https is recommended by Oracle.) Once complete hit OK. You should now see the exception on the security page.
7.Close out of the control panel.
8.You can now acess your site through the browser window.
Thanks to Java error: Missing required Permissions manifest attribute in main jar - Spiceworks for letting me know this.
regards,
Sridhar -
Movies converted from MKV via Handbrake which are played with itunes are missing 2nd line of subtitles therefore apple tv 2 misses these also. Funny is that Quicktime and Ipad 2 handles subtitles correctly on the same moviefile.
(please note that the subtitles are not burned into movie)
What can be the problem?
Has anyone suggestions?
Thanks in advance
Kr
KJSi am experiencing this issue as well...
any tips or resolution would be greatly appreciated...
thanking you kindly... -
Visual Studio 2008 with BizTalk 2009 Missing Assembly Reference - Developing under Windows7
I'm having a similar issue to this....> http://social.msdn.microsoft.com/Forums/en-US/2df94010-5755-4982-a02d-81f8feb51fda/visual-studio-2008-with-biztalk-2009-missing-assembly-reference?forum=biztalkgeneral
Prior to going to Win7, I was developing on a Win-XP machine. I used to delete the generated code and have VS generate it again, but no luck. I get errors in the Build, similar to what shows in the Message Assignment shape in the orc. It's complaining about
a missing part of a Multi-part message. Oh, and the Multi-part message is a schema created in VS2005/BizTalk2006 R2, which was created on a separate Win-XP machine.
Just wondering if anyone has come up with a fix to this? The previously documented entry did not seem to have a solution.
Thanks.Jeff,
Do you see your_orchestration.odx.cs ?
If you do Can you try as following:
1. Take backup of whole solution
2. Delete all .cs files associated with biztalk artifacts, like odx.cs, xsd.cs, btm.cs
3. Open orchestration and in any one of the expression shape copy all statements.
4. Click OK to close the Expression window.
5. Build the solution. (you should get errors)
6. Goto expression and paste code.
7. Build
This has worked for me in past. May be it will work for you too.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful. -
Has anyone had a opf parse error with container.xml missing, when it is actually present plz ?
Has anyone had a opf parse error with container.xml missing, when it is actually present plz ?
Has anyone had a opf parse error with container.xml missing, when it is actually present plz ?
-
HT204291 Since upgrading to iOS7, i have experienced issues with Airplay button missing
Since upgrading to iOS7, i have experienced issues with Airplay button missing from the control menu as well as in Spotify. It is as if airplay is not runing. A temp fix: Reboot of the ipad mini (Home button+standby) Is there anything permanent?
I have verified that my iPad mini and apple TV is up to date.
Airplay enabled, the network is connected with internet.
It is as if, airplay is a service that just stopped working and has to be restarted again via a reboot.Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
The following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Troubleshooting Security Software -
My installation of Itunes to syne my iphone with PC was missing AppleApplicationSupport.msi after 2 installs how can I install such a file do you have a path for this
Hi kensb!
I would recommend that you attempt to reinstall all of the programs and components of iTunes on your machine and reinstall everything again. It can be tricky to get everything uninstalled, so we have an article that can help you make sure you uninstall everything:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
Specifically, when it comes to uninstalling, you will want to uninstall applications in this order:
Use the Control Panel to uninstall iTunes and related software components in the following order. Then, restart your computer.
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended effects.
You will then want to follow the links in those articles to download the latest package of iTunes software for your computer and install again from there. Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
The glass on my iPhone 5 is missing and now my camera won't focus does it have anything to do with the glass missing?! Would buying a iPhone extension lens like the ones you just clip on the phone help?
Wow seems like some physical damage to the iPhone whether this is a manufacturing defect or misuse it would need to be evaluated and determined at either an Apple Store or Service provider. And yes this is most likely causing the camera not to focus.
-
How do I fix Creative Suite CS2 reinstall with error message "Missing or Invalid Personalization Inf
How do I fix Creative Suite CS2 reinstall on same Windows 7 Pro machine, with error message "Missing or Invalid Personalization Information / Missing Resources Library" when I attempt to reinstall from installation disk set? Was having trouble with Adobe Acrobat Pro 8; Uninstalled and am now stuck. You can email me if you like at [email protected] Thank you.
Hi Bill:
I don't remember deactivating (after my XP PRO harddrive scattered)
when I did the first Windows 7 pro install of these programs and it went
fairly well except AA8 was a little problematic when converting from MS
Word.
In my case the AA8 came with a Studio 8 suite of programs as follows:
1) A Studio 8 installation disk
2) A Creative Suite CS2 Premium set of installation disks.
3) A Creative Suite 2.3 Premium upgrade disk with AA8
I uninstalled AA8 and when I tried reinstallation the directions
said to do the Creative Suite CS2 Premium set of installation disks
first followed by the Creative Suite 2.3 Premium upgrade disk with AA8.
Now I'm stuck; What a mess.
Thanks for trying to help.
I will do as you suggest and go to
http://forums.adobe.com/community/creativesuites but FYI:
Bob Lane -
I synced my ipod touch and the library opened up with some songs missing. These songs remain on my ipod, I thought that by syncing they would return to my itunes library. But they won't. Has anyone seen this before?
You should be able to copy iTunes purchases back to your computer's iTunes via File > Transfer Purchases. For music purchased from other sites or copied from your own CDs then are they not already on your computer and/or on a backup ? If not then you will need to find a third-party program that can copy them off the iPod.
-
complete my album downloads the missing tracks but then does not place it with the existing tracks in iTunes. i have a single song bought sat on its own and an album with a track missing, any ideas?
I had this same problem and started a thread, but for the most part nobody responded and those who did somehow didn't understand what the problem was.
http://discussions.apple.com/message.jspa?messageID=11504935#11504935
I'm sure the problem is sweat getting into the apple supplied headphone "remote." Basically even the smallest drop can slide down the wire and get into the unit.
Unfortunately I haven't found a solution other than to get a Belkin remote adapter and some sport headphones. This doesn't give you voice over, but you can still control the volume, skip, etc.
I've been doing this for a couple weeks now and it hasn't had a freak out since.
Maybe you are looking for
-
my photo stream does not work at all. I've tried making a new album, but that does not work. So I've tried using an already existing album and deleting the pictures there. I decided to only upload 1 photo from my old phone (iPhone 4s iOS 7.1.1) to se
-
How can I insert in the table detail of a master/detail form??
Hello, I have created a master/detail form from the assistant, and with the code generated by APEX I do not manage to insert a row in the table detail, I press the button 'Add Row' and refill information, when I press the button ' to apply changes '
-
Stuck on usb/itunes logo, now what?
Tried to update my phone, got some errors and now my phone is stuck on that usb/itunes logo screen. Tried to restart, still the same. Connected it on itunes, it doesn't detect it. Also, I tried this on Windows and Mac. This also happened with the pre
-
Using Apple Composite AV Cable
I recently bought an Apple Composite AV Cable and it's quite good. I was impressed with the build quality and the supplied USB charger is very cute. When playing video on my 80G iPod classic, on the screen it looks clear and sharp but when output ont
-
10.1.0.3 Oracle client for SPARC (64-bit) not on Metalink
All, I cannot find the 10.1.0.3 Oracle client on Metalink account for SPARC. Is this available anywhere?