A205-S7464 DVD Drive doesnt read cds!

I have a A205-S7464 Laptop. running windows vista home edition sp1. my dvd drive doesnt read any cds! i dont know whats wrong. Could it be a driver issue? does it need to be updated or is the drive defective all together? the drive shows up in windows explorer and in the hardware devices it says its working properly! the drive is HD TS-L802A ATA. Driver 6/21/2006 ver. 6.0.6001.18000.
I just restored my system with the recovery disc. it read that fine. then i updated to vista sp1. didnt check if it read any cds before the update but doesnt read any cds now.... i think its a software issue the drive tries to read the cd but never actually reads it....
Message Edited by Polski85 on 02-19-2009 08:52 PM

Hi-
Try downloading and installing the Patchburn Utility. It might help your media reading. I assume this is a disk that someone burned? Could be your drive doesn't like the media, itself, or the burn speed was too high for your 5x DVD=ROM to read.
If Patchburn doesn't help, may be time to move up to a more modern drive to replace your antique.....
There is a real nice,Pioneer DVR-112 replacement you might consider.
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800   Mac OS X (10.4.8)   Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

Similar Messages

  • DVD drive doesnt read DVD-R discs on Mac G4/350 AGP?

    Hi,
    I noticed that my DVD-ROM drive can read a DVD+R and CD-R disc just fine, but when I stick in a DVD-R disc, it just ejects it. I'm using Mac OS X 10.4.
    Is this normal that the DVD-ROM drive can only read in DVD+R discs? The Apple Spec page doesnt say much about this.
    Andrew

    Hi-
    Try downloading and installing the Patchburn Utility. It might help your media reading. I assume this is a disk that someone burned? Could be your drive doesn't like the media, itself, or the burn speed was too high for your 5x DVD=ROM to read.
    If Patchburn doesn't help, may be time to move up to a more modern drive to replace your antique.....
    There is a real nice,Pioneer DVR-112 replacement you might consider.
    G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800   Mac OS X (10.4.8)   Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

  • CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive!

    CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive.the drive door say RW DVD+R DL,Compact Disk Rewritable,Ultraspeed,DVD Multi Recorder.I was Wondering if Windows Loaded the wrong Driver?My Laptop S/N IsCNF62612TZ And P/N Is EZ601UA#ABA And The Front Of My Monitor says Hp Pavilion Dv 1000 Entertainment Notebook PC,And The Service Tag Is dv1738od and the Sticker On The Back Of The monitor say Hp Pavilion dv5- 1235dx Entertainment notebook PC.it Cme Factory With Win xp and when i got it the os was corrupted.i tried to reinstall xp but disk said no hard found.so i booted it up with vista ultimate and then downloaded the drivers and stuff from the here.should i had downloaded the 64 bit set as well?

    della wrote:
    My toshiba tecra a2 can only read DVDs. I cant read any type of cd. Ive tried so many things. My laptop is running on xp service pack 3 with a mat**bleep**a DVD RAm UJ 820s. I can burn/run any type of DVD but cant do anything with cds. Ive tried unistalling the drive and that didnt work. Ive uninstalled the IDE drivers and that didnt work. Nothing seams to work. I cant use recovery cds because there CDS. Please Help!!!!!!!!!
    It's probable that the CD 'side' of the combo drive has failed.  That you cannot boot from the recovery CD is pretty much proof of the failure.  

  • DVD Drive issues, plays CDs but not DVD data or regular - Satellite (unknown series type)

    I tried to update the firmware but ran into some strange issues. First of all according to google, the drive is manufactured by Panasonic. Toshiba doesn't make their own drives? For this reason I wonder if it is improperly detecting the drive make/model.
    Anyways I downloaded the firmware update for it, version 1.03. It is a MAT**bleep**A UJDA760 (going from memory, model may be slightly diff like UDJA). When I run the firmware update it doesn't detect the drive at all and says it is for a THINKPAD?? Weird...
    Also, if you have a link to a guide for removing this drive I would appreciate it. I want to verify that windows is detecting the model/maker correctly. It is not one of the simple hotswap types, it looks like I have to remove at least the entire bottom of the laptop.
    I am working on this for a client, I do tech repair on craigslist but my laptop hardware expertise is limited most of my experience is with desktops.

    joe7dust wrote:
    I tried to update the firmware but ran into some strange issues. First of all according to google, the drive is manufactured by Panasonic. Toshiba doesn't make their own drives? For this reason I wonder if it is improperly detecting the drive make/model.
    Anyways I downloaded the firmware update for it, version 1.03. It is a MAT**bleep**A UJDA760 (going from memory, model may be slightly diff like UDJA). When I run the firmware update it doesn't detect the drive at all and says it is for a THINKPAD?? Weird...
    Also, if you have a link to a guide for removing this drive I would appreciate it. I want to verify that windows is detecting the model/maker correctly. It is not one of the simple hotswap types, it looks like I have to remove at least the entire bottom of the laptop.
    I am working on this for a client, I do tech repair on craigslist but my laptop hardware expertise is limited most of my experience is with desktops.
    Typically if the optical drive can read CDs but not DVDs (or vice versa), there has been a hardware failure of the DVD or CD circuitry.  Drivers/firmware aren't going to solve the problem, only replacement of the drive.
    Find the correct drive at http://www.sparepartswarehouse.com/
    Find unofficial disassembly instructions at http://www.irisvista.com/

  • My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no error

    My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no errors.
    I tried to reinstall driver.
    I downloaded new codec
    I tried Microsoft FIX IT
     Nothing worked.
    Need some help.
    Thank you!!
    Paul

    Hi Albos, This is a known problem. These superdrives die after a while. See the various threads on this site and the internet. I have the same problem with my Imac 20" 2.16 ghz. Just wants to burn and read cd's. Its has to do with the laser. For DVD an CD are two different laser and the one for DVD's has probably died in yours (as it did in mine). I bought an external LG burner and problem solved. (And a lot cheaper than replacing the superdrive)
    Hope this helps you.
    Robert

  • My DVD drive doesnt work

    My dvd drive doesnt work, and i want to format the HD, any ideas??? i have an external dvd drive but it doesnt recognice it when i want to install the OS,
    ... Maybe someone can tell me how. Thanks

    Time to take your disc and your computer to an Apple Store or an AASP, I'm afraid. They should be able to reinstall the OS, etc. Have no idea what they would charge but I'm sure that it would not be too expensive.
    Clinton

  • EMac External LACIE DVD Drive not reading.

    eMac External LACIE DVD Drive not reading.
    eMac 700 MHz running OS X 4.4
    Came without DVD or modem internal
    Has 256mb memory
    Bought a used Lacie 1394 Firewire DVR External.
    Was able to burn DVD’s and CD’s with Toast 6 Light.
    Cannot find the “DVD Player” on the hard drive.
    It will read data DVD.
    eMac will not read any movies burnt or bought.
    I was told I probably need more memory?
    Thought running IDVD would fix the problem.
    No Soap.
    This machine was giving external modem problems before Tiger was installed.
    Before we spend more money or just get ride of the eMac.
    What is the DVD problem?
    This same Lacie burner reads and writes DVD and CD fine with our iMac 450 DV 320mb memory. Running 9.2 and X.3

    OS X 10.3.x / 10.4.x natively support data burning to external DVD drives but video payback requires software such as iDVD which isn't installed by default on models without an internal DVD drive (the installer sees no internal drive and thinks it's unnecessary). Try downloading VLC Player and see if that will let you play movies.

  • DVD drive not reading after Flip4Mac install

    My DVD drive was reading commercial movie DVDs just fine until I installed the Flip4Mac new version.   I uninstalled Flip4Mac but it did not resolve the problem.   OSX.8.2      Any suggestions?  

    You can try resetting the SMC and pram. If that doesn't help you can try a cleaning disc, your lens might be dirty. I doubt very seriousley that installing Flip4Mac had anything to do with it. Slot loading SuperDrives aren't the heartiest animals around.
    To resettle SMC
    MacBook and MacBook Pro 
    Laptops with a battery you can remove 
    Shut down the computer.
    Disconnect the MagSafe power adapter from the computer, if it's connected.
    Remove the battery.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Reconnect the battery and MagSafe power adapter.
    Press the power button to turn on the computer.
    Newer Mac portables with a battery you don't remove
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.  
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • My dvd drive wont read (or even accept the existense of cds) much less burn them. HEEELLLLPPP

    my dvd drive wont do alot of the things it is supposed to like burn cds, or even recognize them, also when I went to my profiler it says the drive doesnt exist. as far as I know the model is an  MATSHITA DVD R UJ 875. my computer will still read dvds, but if there is a cd inserted, then it makes some aggrivating noises and then spits it out, I know little to nothing about SERIOUS computer work, like firmware patches, or bridges or whatever the terms are. When I try to burn anything, it cycles almost burns, but then, like clockwork. the error messafe pops up that  there is an un expected error. I am at my witts end here is there any thing I can do to fix this problem, without spending money I really dont have right now? (I am going to school and it starts this thursdaty) or should I just get my SKS out and fix the problem with a Full metal jacket?  someone help. if need be my email is [email protected] Please help me if you can.
    Thanks all

    Try resetting PRAM…
    http://docs.info.apple.com/article.html?artnum=2238
    At times it helps with optical drive issues.

  • DVD drive light on Satellite M50 does not turning OFF, drive not reading CDs/DVDs

    Hello,
    I have a Satellite M50-mx5 with a Mat****a DVD drive. When I insert CDs or DVDs, the drive starts up, spins the CD around (the light is blinking)...but a few seconds later, the drive stops spinning, but the DVD drive light remains on.
    Windows also thinks that the DVD drive is empty.
    I also tried to boot Windows from CD when the computer starts up, but with no success either.
    Any ideas to what's wrong? Is my DVD drive broken?
    Thanks
    Eli

    Hi
    Sorry to said it but in my opinion the drive is dead and only the replacement can helps to get the drive functionality back.
    But be aware that not every drive is supported and can be used with the notebook!
    Take a look into the user manual. Sometimes the compatible drives are listed.
    And its useful to known that all parts can be ordered from the ASP in your country.
    have a nice weekend ;)

  • SD-2212 Drive doesnt read some DVDs - Satellite 1410

    Hello every1,
    I have Satellite 1410-604 for more than 2 years, with forementioned combo drive...
    It serves me well, except that it doesnt read some of the types of dvd-medias, and I use only high quality Verbatim dvds...
    It only happens in last few months. It is not my primary computer but it is at use in my home, and it really bugs me that when my sister or father takes the new Sattelite Pro A60 on the road(its battery is better) I cant use latest discs on this one. So if there is some firmware upgrade, cause i cant find it on this site...
    Thanks in advance...

    Hi
    I dont think that the firmware update will solve this issue because this driver has recognized this DVDs a few times ago.
    Furthermore I dont found any firmware for this drive on the Toshiba website.
    But check if the drive removing procedure will solve this problem. So for this please go to device manger and remove the drive. After new booting the OS should recognize the drive again
    Bye

  • Trying to upgrade from leopard to snow leopard.. my dvd drive wont read my disks, yet it plays music cds and movie dvd's...help!!

    I just purchased snow leopard and I evenually want to upgrade to lion.. I have to  put snow leopard on first in order to do that. I currently have leopard. I try to run my disks and they wont read, my DVD drive makes a ugly noise when it tries to read them.. I tried my original installation disk and it does the same thing.  But when I put in a regular movie DVD or a music CD it plays them fine without problems. I called customer support, and they suggested I take it to a apple tecnician... cant really afford that right now....has this issue happened to anyone???? any suggestions???? HELP!!!

    hi there angel..may i know did u find out what was the problem and how did u fix it? much thanks.

  • Optical Drive does read CDs

    To Forum
    My optical drive wont read 99% of CDs. Had it checked at the Apple store and no problems.
    The same CDs that fail on my MBP work in all other computers, drives, CD Drives.
    The drive will also play all DVDs
    Why doesnt it like CDs? I've tried the usual cleaning of CD. Any other thoughts?

    Neville,
    If you look around this forum you will see a dozen or more others all having the same problem, all starting around mid May.
    My tale of woe: MBP 17" late 2008, OSX 10.5.8, Matsushita UJ-875 with DA09 firmware. Will not accept ANY CD media. Accepts and plays DVDs fine. CDs are ejected after several seconds. Rejected CDs work perfectly in other players/readers etc. Have used DVD/CD cleaning disc - repeatedly - with no effect.
    Any help from you or anyone else appreciated.

  • Installed SSD and 8GB ram, Now Drive wont read Cds

    I have a late 09 15" Macbook Pro.  Today I installed an OWC Mercury Extreme Pro SSD and 8gb of Crucial ram, I also disabled SMS and made it so the drives wouldnt go to sleep.  Everything works REALLY fast and great except for some reason now when I put a CD in, the computer thinks its blank.  Dvds work fine.
    Any ideas?  Maybe I bumped the connector on the drive? 

    I booted off of my old drive just to see if its a SSD issue.  It does the exact same thing booting form the original hard drive.  Also I took the optical drive out and gave it a visual, double checked the connections too.  I also tried to reenable SMS and that didnt make any difference.  It all seems OK, but it still doesnt like CDs.
    Seems odd that my drive would stop working at the exact same time that I change to an SSD.

  • Dvd drives not reading

    Our dvd drive on our Power Mac 2x2.66 GHz Dual Core intel.The drive is an Optiarc dvd rw ad-717a: sometimes will not read inserted discs. These discs work ok when tried on our I mac. Other discs work fine. This has occurred with discs that have bee writen in the drive as well as supplied discs.Help would be appreciated.

    Not Sure what you exactly mean but if the Mac can't read the CDs it has written then there is a problem with the optical drive itself. If the CD is detected on teh computer but will not play it might be something to do with the dvd player app on your mac. Try to download VLC for you mac and see if it can read content (assuming it is a video or something). Cheers!
    -Manuel

Maybe you are looking for

  • Email in B1 2005B

    Hi all! We have a problem about sending email in SAP Business One. We don't use Out look integrated Add on for customer. We will try send email but it is done when email of sender the same domain with domain of receiver. For ex: Sender: Consultant @

  • When will I get iOS6 update on existing iPhone 4s device I have?

    Would like to know when will I get iOS6 update on existing iPhone 4s device I have?

  • Status checks not going away on restart

    We are accessing an aggregated project which is simply being hosted on our website, not a formal LMS. When a user completes the project and exits and the next user at the same station accesses the project, the status checks are still in place and, in

  • Can't Launch Apps in Creative Cloud it's "Loading"

    Please help, I launched the program and I go to the apps tab and there is a loading icon. It keeps on loading. Please help! URGENT Thanks, I will make sure to give points to the best solution.

  • BDC program for ME29N.

    i have created a BDC program for ME29N, it is working in process level but it is not working while executing it. how can i solve that? pls give me a sample code.....