A2107a SD vs USB Storage

I have the A2107a tablet and nothing has moved to my sd card, If I try to change the storage from USB storage to sd card I get this message: (1) If you select SD storage, the applications that installed in USB Storage can't be used and the device will reboot, are you sure to change to SD storage.
My question is nothing has gone to my sd card and I can't even upgrade anything cause all is in usb storage and there isn't much room left for any upgrades..
(2) How can I move certain programs or games that I originally installed, music to my sd card??.
And should I make the original move (1)
I need help. please advise.
Moderator Note; subject edited

SD versions of TV shows and films will be smaller than the HD versions e.g. looking at some of the new films in the store here in the UK, for Argo the HD version is 4.85 gig, the SD version is 1.98 gig, and for The Master it's 5.73 and 1.97 gig - for TV shows the recent series of Top Gear have HD episoded of 2.37 to 2.46 gig, SD versions of 716 to 796 meg.
The advantage of SD versions will be smaller downloads, and you can fit more of them on your iPad

Similar Messages

A2107A USB storage puzzle

I've recently acquired two of these tablets (over-enthusiastic bidding on eBay!), and I'm pretty happy with them. But puzzled about the USB storage they offer: they seem to be identical units, same model number, build number, baseband version. But one of them says it has 12.26Gb of total USB storage, the other only 1.35GB. Any explanation? Genuinely differently hardware inside? Or some software issue that might be fixable?

Hi, Please try the following first: http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70030.exe If still no luck, you have to install chipset driver before USB 3.0 driver using driver from the following link: http://h22207.www2.hp.com/us-en/drivers/selfservice/hp-15-r200-notebook-pc-series/7486447/model/7584372 Regards.

Apps to USB Storage issue on A2107A-f

Running in to an issue trying to move apps to USB storage. When I move the app to USB storage, the icon disappears from the display screen. The app is still on the device and can be found if I look under the App folder, but no longer shows up on the customizable screens. On the other hand, any apps that remain under Tablet storage still show up on the customizable screens. This wouldn't be such a problem for me if it wasn't for the fact that of the 8GB storage on this device, 2.29GB is allocated for internal or Tablet storage. So, it doesn't take long to fill up that space with apps.
Would appreciate any help. I did try calling Lenovo tech support and that was fruitless.

I have the exact problem. There is no solution according to my tech.
Moderator comment: Post edited to conform with the Community Rules.

How can I see file with chinese name in Sunray USB storage?

hi, All
I installed Sunray4u3 on Solaris0805. the application server is win2003EE.
I accessed usb storage from win2003, but I can only see files with English name , and could not see files with chinese name. Why? who can help?
best regards
xiong wei

You might want to make sure your credit card is listed in the billing information associated with your Apple ID (see http://support.apple.com/kb/ht1918).
Also, to change the From name that appears when you address emails on and iOS device, go to Settings>Mail,Contacts,Calendars...tap your iCloud email account, tap you iCloud account at the top, tap Mail at the bottom, then enter the name you want to use in the Name field at the top.
To change the From name on your Mac Mail, go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done. Then quit Mail on your Mac and re-open it. Your new From name should now appear in the drop-down list when you compose a new email.

USB storage with WRT610N....help!

After spending 4 hours (no exageration) with Linksys Level 2 tech support I am at my wits end....
I just purchased a WRT610N and want to use the USB storage feature to backup my primary desktop. Here's the specifics:
Desktop is an older Dell XPS runnings XP SP3. Desktop has three logons....for myself and my kids.
I'd also like each desktop logon to be able to access the router USB storage feature so that we have a common place for pictures, etc.
I have an office laptop and I would like this to access the storage device
Eventually I will be adding more computers to the network for my kids.
I'm also interested in using the FTP access to get to the files on the storage device when I am away from home.
Through 3 separate tech support calls, each tech tried a different approach to get this to work. Nothing worked. I want to start from scratch.... What is the best way to accomplish what I want to do? After suffering through the pain, is the WRT610N a good solution or should I return it to Amazon and do this some other way?
A final note, tech support did upgrade the WRT610N's firmware to 1.00.00.18.
Thanks in advance for your help!

jal4680 wrote:
After spending 4 hours (no exageration) with Linksys Level 2 tech support I am at my wits end....
I just purchased a WRT610N and want to use the USB storage feature to backup my primary desktop. Here's the specifics:
Desktop is an older Dell XPS runnings XP SP3. Desktop has three logons....for myself and my kids.
I'd also like each desktop logon to be able to access the router USB storage feature so that we have a common place for pictures, etc.
I have an office laptop and I would like this to access the storage device
Eventually I will be adding more computers to the network for my kids.
I'm also interested in using the FTP access to get to the files on the storage device when I am away from home.
Through 3 separate tech support calls, each tech tried a different approach to get this to work. Nothing worked. I want to start from scratch.... What is the best way to accomplish what I want to do? After suffering through the pain, is the WRT610N a good solution or should I return it to Amazon and do this some other way?
A final note, tech support did upgrade the WRT610N's firmware to 1.00.00.18.
Thanks in advance for your help!
The harsh reality is that the results for people trying to use the Storage Link function have been mixed, at best. Especially in trying to utilize it for a "backuP' function. The kernel used to manage the Storage Link is apparently unix/linux based, and has some difficulty playing nice with Windows based backup utilities. Additionally, there have been reports that the connectivity to the attached devices is, at times, poor. Finally, there are issues with file corruption (date/time stamps, specifically). There have been no firmware updates to deal with these issues. If your primary need is for an attached NAS solution, I would strongly recommend looking at other devices for that solution.

My new iPhone 5 won't connect to iTunes, and when I connect to my computer it comes up as a usb storage device, also in the phone itself under usage it shows internal memory of 2gb and sd card 64 gb, is this an original iPhone or have I been sold a copy

My new iphone 5 can not connect to itunes, it comes up as a usb storage device when I plug it in, also in the phone under settings/usage it shows internal memory of 2gb and SD card of 64gb, I cannot get it to connect to itunes at all so cannot sync etc, is this a genuine Iphone or a copy. I have owned 4 iphones and never had a problem with connecting to iphones and restoreing to a backup.

According to http://en.wikipedia.org/wiki/IPhone_5
the iPhone5 has 1GB of RAM, and internal storage of 16, 32, or 64GB.
It does not use SD cards.
Fake iphones are really Android phones using the skin of iOS6.
Click on the App Store icon. If it takes you to Apple's App Store, then it's a real iPhone.
But if you are directed to Google Play, then I'm afraid you've gotten a copy.

I am trying to add music to my computer and then put it on a usb storage device

ok i havent used a computer in a very long time and the last time i did things seemed a whole lot easier. i got a new laptop for valentines day and i still aint figured this thing out. what i am trying to do is add all my music cds to my computer, make some playlists, then download the music to a usb storage device so i can have the music in my truck.
when i put a cd in my computer it pops up and it starts playing but i have no clue as what to do next. i have tried to make a playlist through the player that pops up and plays the music but aint having any luck. IM CLUELESS!!!! nothing ive tried has wroked, i need help please.
thank you in advance

Hi,
The below link shows how to create playlist in Itunes. Once the playlist is created, if you are using apple Ipod or any other apple product. Then once you connect the device it will start the sync with the device and then you can start playing.
http://support.apple.com/kb/PH12340
If you are using another device, then please do mention the device to which you want to sync the music and which player are using on the system.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

Windows Server 2012 Group Policy Block USB Storage devices @ User Level Not getting applied on a Domain Client machine with Windows Server 2008 R2. Why?

Hello,
I have a Windows Server 2012 R2.
I have configured the Group Policy on it to block the usage of USB - Storage Devices @ user level on the client machines. It works properly for my Windows 7 client machines but it's not working on one of the machine having Windows Server 2008 R2 installed
on it (this machine is also a domain client in the same domain).
I will really be thankful if anyone can suggest some solution to this issue.
Please feel free to write back in-case I have missed anything obvious to be shared.
Thanks!
-Vinay Pugalia
If a post answers your question, please click "Mark As Answer" on that post or
"Vote as Helpful".
Web : Inkey Solutions
Blog : My Blog
Email : Vinay Pugalia

Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet
Subscriber Support
If you are TechNet
Subscription user and have any feedback on our support quality, please send your feedbackhere.
Andy Qi
TechNet Community Support

USB storage devices not being recognised

Product:
13" Macbook Pro w/ Retina Display (Late 2013 model)
OS X Yosemite (version 10.10.2)
2.4GHz i5, 8gb 1600 MHz DDR3, 256gb HDD
Issue:
- macbook unable to recognise USB storage devices.
- can be found on disk utility but 'greyed out'.
- cannot be found under devices in finder.
- tried restarting laptop, no effect.
- additional storage via Nifty + 64gb micro SD is working fine.
- apple products (iPod/iPhone/iPad) and printer/scanner working fine, only storage devices appear to be affected.
- USB-ethernet adapter appears to be working w/o problems too.
- last technical thing done to the computer was SMC reset 5 days ago for power cable light not working properly (fixed with reset).
Hello everyone,
I seem to having some issues with my macbook and the ability to use USB storage devices. The SD card slot appears to be working fine as I have a nifty device attached on. I'm not sure exactly when this started to happen but it was working last week for sure.
I've put some succinct notes above for anyone who is willing to help out and is able to use it to determine the problem but I don't think it's a hardware issue. Maybe it's a bug with the new OS X update over the weekend?
I've attached a screenshot of the disk utility below as well.
If anyone could help me out then that would be greatly appreciated.
Thanks in advance!

Some users on another Apple thread had success in running Kext Utility last November with similar issues.
I ran kext utility 2.6.1, restarted my computer and everything was working again.

My Pro freezes when I connect USB storage

ok so for about a month and a half now, sometimes when I connect a USB storage device, my MBP (13 inch, from the most recent early 2011 line) will freeze. if there's an animation ont he screen, like the time machine symbol, it will keep going, but no response from keyboard or trackpad. at first it happened with a new cheap USB flash stick, so I thought it was that. but since then, once in a while it happens with my time machine USB hard drive, my android phone, and a different USB stick, none of which have had this problem before on anything, including my earlier Macbook from 2008. ideas/causes? this guy seems to have a similar problem: https://discussions.apple.com/message/15088832#15088832

Hi f,
Try an SMC Reset: http://support.apple.com/kb/HT3964

How to detect if there is a USB Storage in my pc? VISUAL BASIC 6.0

Hi sir.
my program has a function auto back up. so i want to detect if there is a usb or not. if there's a usb then it will be save in the available usb storage. if there is no usb it wont save and will pop up a msg box saying "There is no USB device,
please insert USB to continue back up" VB6 platform
thank you sir.

Hi NikkoProgrammer,
Welcome to MSDN.
I am afraid that as Renee Culver said, these forums donot support VB6, you could refer to this thread:
Where to post your VB 6 questions
You could consider posting this issue in these forums below:
These forums do not support Visual Basic 6, however there are many third-party support sites that do. If you have a VB6-related question please visit these popular forums:
VB Forums
VB City
Thanks for your understanding.
Best Regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

WRT600N USB Storage Problems Solved

For a couple of years, I've been living with all the problems others have reported with the WRT600N USB storage - lost connections, permissions problems, rebooting the router to recover access to the USB drive, etc. I solved my problems, mostly, by switching to a DLink DIR-655 router. I assume other routers in the Dlink family that support USB devices will perform similarly.
My main problem seemed to be interference from the microwave, which is in an open kitchen/keeping room arrangement in my house. However, the bottom line is that any time I lost wireless connectivity to the router, due to the microwave or unknown causes, I'd lose access to the USB drive. This meant a trip upstairs to power cycle the router and the USB drive several times a day.
With the Dlink, I still sometimes lose wireless connectivity due to the microwave or unknown causes, but not as often. Sometimes, but not always, this will cause me to lose the USB drive access. If I do need to reboot the router, I can do so from the web based interface, something that was not possible with the WRT600N, so no more trips upstairs to perform this operation. I also find have a stronger wireless signal in my work location with the Dlink.
Dlink uses a SharePort software utility to manage the USB connection and this has to be installed on all PC's that want access to the USB device. SharePort makes a USB device appear to be a local device attached directly to the computer you're using and you can attach external drives/printers/probably USB hubs. (I've experimented only with an external USB drive.) Because of this, however, only one computer can attach to the USB device at a time - not a problem for me, but you need to be aware. The software has a mechanism for requesting access to the USB device from one computer, when the device is in use by another computers. You can also set it to automatically connect to the USB device if its available, to try a reconnect if connection is lost, and to automatically run a program when the USB device connects. Dlink says SharePort will support FAT or NTFS formatted drives and there's no known limitation on the drive size.
Dlink support doesn't seem much better than here - it took about three weeks for me to get an answer on the external drive size and formatting options. There are plenty of complaints on the Dlink support site about poor support, poor performance of SharePort, etc. So, all I can say is their router/USB device sharing has worked much better for me than my Linksys WRT600N ever worked.

Welcome to the WRT600N nightmare. The Storage Link is poorly documented, and the firmware controlling it has issues. Basically, it will corrupt file date/times stamps whenever you copy files onto the attached drive. It has also been known to be a bit flaky about maintaining the drive as a connected/mapped drive. Backup programs may have difficulty accessing the drive via Storage Link. Depending on the file format you use, you may encounter file size limitations on the Storage Link drive.
I, personally, gave up after a few days of these issues mentioned above and bought extra USB hard drives for each computer in the house rather than try and use the Storage Link as a NAS.
What O/S are you using on your computer? I can try and walk you through the setup.
A+ Certified, over 15 years of hands on computer and home networking experience...and I still get lost!

V-cast setup issue; turning USB storage off

.I am trying to use V-cast. Media Manager.
I've installed the app on my Droid X and on my desktop. I have the USB cable connected and I have V-Case MM open on my desktop. Everything seems to be set to "Go" until I launch V-cast on the phone.
When I do that I get the following error: "Memory card error, card mounted or not present. Please make sure memory card is inserted and USB storage is turned off."
I know the card is present, and mounted because the Droid X comes with the card already installed.
But I went to "Settings/SD card & phone storage settings" just to be sure. It shows "Total space 14.87GB" and "Available space 14.80GB", and an "Mount SD Card" option. "Internal phone storage" shows 6.22GB of available space.
Now here's the rub.
When I plug in the USB cable in the SD card data information changes to "unavailable" and the "Unmount..." option changes to "Mount SD card".
I'm guessing the issue is with the last part of the error message: "USB storage is turned off" but I don't know how to turn it on.
What is USB storage? Is it to off site storage option Verizon offers? Am I required to "Subscribe" in order for this app to work?

I believe you have to be in PC Mode not Mass Storage... Try changing that under mount options.

Cypress - Other hardware - Cypress At2 USB Storage Adapter

I have a USB Disk Enclosure that was working with Windows 8.1. I recently installed a Windows Update optional update titled "Cypress -
Other hardware - Cypress
At2 USB Storage Adapter" and the next time I attempted to use the disk enclosure, it did not work. When I connect the device the system makes a sound like it recognizes a device and the
Device Manager display gets redrawn (refreshes), but no device shows up in Device Manager, Disk Manager or Safely Remove
Hardware and Eject Media. I have booted, also without helping the situation. I am thinking that I should remove the update, but the "Uninstall and update" panel does not list and update title that matches the above.
Update #1: I found the same issue from two others on another MS forum that was posted yesterday: answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/crypress-a2b-usb-driver-update/96765e04-7f4a-42fb-bf37-ca98fa8fc0cc?rtAction=1395927639282
I have had MS Support remoted into my system all morning and am being told they want $99 to run their tools to fix the problem.
Update #2: After hours chatting w/MS Support, no progress. They ran lots of virus scans and repair procedures. I did make the following observation. When the USB Drive is connected, the system recognized something and chimes as described
above. What actually changes is that a "Cypress AT2 USB Storage Adapter" devices appears in the "Universal Serial Bus controllers" tree of Device Manager. When the drive is unplugged, this device disappears. Before the
Win Update that I suspect caused the problem, the drive would appear as a drive also. Note that the original behavior had the device appear as a disk, not as a removable device like a flash drive. So Windows is recognizing the storage controller,
but not presenting the attached disk as a drive in windows. Oh well, back to the MS Support Chat......
Update #3: I contacted MS Support a second time and pointed them at the “Cypress AT2 USB Storage Adapter”
that appeared when the USB Enclosure was plugged in. They poked around for a while and finally “Uninstalled” the device driver and had me unplg/plug the drive and BANG, the drive appeared.
I don’t know if it was the 5+ hours of work the first support person did or if that was the solution all along, but the drive works now.
Oh and one more thing, as I was completing the survey for the support, with not good ratings I might say, the remote control connected support person booted my computer right out from under me without a word of warning.
I guess there is more than one way to keep survey ratings high.

Same problem. To solve you have to uninstall "Cypress At2 USB Storage Adapter"
removing driver files with the option suggested by the dialog box of device manager. (I'm sorry i can't use the correct words because I own the italian version)
After that, when you connect the drive, il will correctly mount the volume and do not appear Cypress device anymore.

Is writing to flash drive always in "mass USB storage mode"?

I am trying to display JPEGs on my HDTV using a MEDIAGATE M2TV 1080P Media Player. I have written JPEG files to a flash drive and connected the flash drive to the M2TV Player, which doesn't recognize the USB flash drive. The M2TV manual says that only "mass USB storage mode is supported". Are there different modes of storage? What do I get from my mini? Also I assume that my file system is HFS+. Correct? Thanks for any help.
Owen

Mediagate are the people to ask if things aren't working. The questions should be about the partition table (Apple has a couple) of your flash drive (possibly the brand) and the format. (In-camera flash storage has, as you read in the Wikipedia, it's own, unique partition table.) Flash drives probably come from the box with no partition table, but only one partition (volume) formatted in FAT32. This default is rarely changed by people; so that should have worked.
The question is how to transfer your JPEG photos from a Mac hard drive to a flash drive. Only now is it occurring to me that they may just mean their box captures JPEG files and transfers then to your Mac's USB port in USB MSC protocol, not USB PTP.
My ignorance may have confused the issue more. I last studied JPEG when it was released . There was room in the file for EXIF data. However, I doubt they anticipated GPS data and more, which Macs could interpret as metadata (as they do 'keywords'), and require USB PTP protocol to transfer. Well, this is wrong.
I borrowed a JPEG photo with a huge EXIF file, containing GPS data, and changed the suffix to .TXT, opened it in TextEdit, saved it, and dragged this non-photo file (using, presumably, USB MSC protocol) to a flash drive formatted HFS. I then changed the suffix to .JPG and opened it with the Finder. Its size hadn't changed, and its EXIF data hadn't changed. So, PTP is a mystery to me: I don't know what advantages it offers, though I choose it on cameras. Perhaps Mediagate can explain it, since it's the preferred protocol for transferring photos.
If you really need to copy a photo to a flash drive in USB MSC protocol, you can always change the suffix to .TXT and back. Perhaps someone more knowledgeable can help. (I'm unfamiliar with your device.)
Best of luck.
Bruce

A2107a SD vs USB Storage

Similar Messages

Maybe you are looking for