A3 installed- doesn't work - Now all photo programs crash and are unusable

Since I installed A3, my computer world has fallen apart. I can't even open A3 now because it won't recognize the new library that it made (converted) from my A2 library....which I might add is nowhere to be found now....GRRR!
So, since I can't open A3 and I need to look at some photos someone just sent me, I thought I would use Preview to look at them....it crashes every time! So, I will use HP Photosuite....yes, I'm really desperate.....guess what, it crashes every time too!!! I finally decided to try the old faithful member of the iLife suite, iPhoto and guess what....it won't work properly either.....
What has A3 done to my machine? My CPU won't run....most of the time 99% idle.....it's only using 2gb of ram....it's like my Pro won't even work.
Someone please get me out of this nightmare!

Just actualized to 3.0.3 and again. Nothing new..!! I thought it's a Pro app..?

Similar Messages

  • TS3992 i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

    i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

    I have just created this account to tell you that nothing would change if you restored your phone.
    The first NO SIM nuisance happened just a week ago. Nothing had been done to the phone before that. I pressed HOME + POWER buttons to restart the phone and SIM card was successfully recognized as if nothing had happened. Then I had a lucky week, not reminded of this issue at all.
    Today, however, the same problem keeps annoying me. I've used the same method to heal the phone but all I have done seems more like a placebo. So I tried the ultimate solution, restroing it in iTunes.
    Ridicuously, the moment I finished basic setup on the newly restored phone, the same NO SIM CARD INSTALLED message poped up.
    So IMO, it's not what you should do to erase and restore your phone.
    Plus, I called my native carrier and they said no such problems have been submitted. And since my nano SIM card is quite new (three months old), I'm not going to replace it.
    I googled this problem and found something on a Hong Kong webpage. The author of that thread points out that there is a flaw in the SIM card tray that prevents the phone from successfully recognizing SIM cards.
    And I really hope Apple could probe into this issue and give official solutions other than restarting / restoring the phone like an idiot.

  • Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?

    Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?

    Make sure the silent switch is not set to mute.  If you can see the red dot, it is on mute.
    It may think you have headphones plugged in, try plugging and unplugging a wired headset a few time.
    The next step would be to restore as new.
    If none of that works, a warranty exchange would be the resolution.    

  • Updated to iOS 5, now the Photos app crashes and the camera app.

    Also I restored. Please help me

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

  • It simply doesn't work at all

    Quite strange: I have DW CS4 Build 4117 German on Mac OS X
    10.5.5. InContext doesn't work at all! Between "Spry" and "Data
    Objects" there is no "InContext". The manual and documentation
    explain everything detailed. I also downloaded the inContext
    tuturial, but nothing works! On the German Adobe webiste inContext
    is also advertised as included in DW CS4. So what's wrong? Am I
    missing something?
    Regards,
    Andi

    Thanks! I solved this issue by uninstalling and reinstalling
    DW CS4. It seemed like one of these typical Adobe problems when a
    beta was installed before. I had the English DW CS4 beta installed
    and just installed the German version without uninstalling the
    beta. Now everything works fine - quite. A lot of times when
    finishing any CS4 app the Adobe crash reporter pops up ;-)

  • I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

    I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

    I'm having similar issues with my phone.  I got my first iPhone recently, only had an iPod touch gen4 for a little over a year.  Updated to 6.0.2 when we got the phone (iPhone 5) a few days before Christmas.  When I got home on the evening of January 11, my phone would not connect the router anymore.  I was able to get it to connect after resetting the phone and the router, updating the router, and manually connecting.  That laste for a few minutes and then wouldn't work anymore.   I live in an area with very limited service, we have a network extender installed to help, and I am barely getting a 3G signal at times.
    My wife's iPad 4, my touchiPod 4, and all of our laptops are working just fine on the router.  When I dropped my kid off at school today, I noticed that I am not even seeing the school network anymore from the parking lot where before I got 3 or 4 bars and could connect to their wifi when I was there.  Today my phone goes back and forth between seeing my home network but not connecting, to not even seeing the network at all even from the same room that the router is in.
    Hope Apple fixes this problem soon..............

  • My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay in store?

    My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay for repairs in store because I didnt get the Apple care plan when I purchased it. Sprint said it may be a phone problem not sure if I should take it to Sprint or Apple...I just need my phone

    I'm sorry to learn that you are not able to make/receive calls chelseabee! (ticket number removed) results indicate that there is no issues with the network or account provisioning. Since you have already done a hard reset http://vz.to/1gBkSJc (as per your post), I recommend exploring replacement options. If your phone is within the one year manufacturers' warranty we can provide a Certified Like New replacement http://vz.to/uyYF0o as long as no physical/liquid damage exist. If your phone has sustained physical/water damage and you have insurance, you can submit a claim to the insurance company online at this link http://bit.ly/07CrqPK
    AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport
    >> Edited to comply with the Verizon Wireless Terms of Service <<
    Edited by:  Verizon Moderator

  • HT1349 I updated my IGO primo, and now it doesn't work at all. what can you advise me

    I updated my IGO primo, and now it doesn't work at all. what can you advice me now?

    If it's stuck on the Apple logo, you'll have to force it into recovery mode and restore it.  See http://support.apple.com/kb/ht1808.

  • Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

    Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

    Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

  • How can i uninstalled adobe creative suite on my old computer that it doesn´t work now and installed adobe on my new computer?

    how can i uninstalled adobe creative suite on my old computer that it doesn´t work now and installed adobe on my new computer?

    use the adobe uninstallers to uninstall from your old computer, and use the installation files to install on your new computer.
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • My app store doesn't work at all....safari doesn't work properly....it shows something like super fish....if i try to login to app store it shows connection failed. i wanted to re install osx or install yosemite beta

    my app store doesn't work at all....safari doesn't work properly....it shows something like super fish....if i try to login to app store it shows connection failed. i wanted to re install osx or install yosemite beta

    HI ..
    The only way to reinstall OS X on a Mac already running v10.9 is to use OS X Recovery.
    Starrtup your Mac while holding down the Command + R keys.
    From there you should be able to access the built in utilities to repair the startup disk and reinstall OS X.
    Please read >  OS X Recovery

  • Mac Mail Issue: I was having trouble sending to hotmail accounts from my Earthlink account, they had me go into Mac Mail preferences and make changes, now Mac Mail doesn't work AT ALL - any help changing the settings back to correct Mac Mail settings? I c

    I was having trouble sending to hotmail accounts from my Earthlink account, they had me go into Mac Mail preferences and make changes (because they claimed it was Mac Mail's fault, even though the hotmail error code said it's because Earthlink is blocked by hotmail), now Mac Mail doesn't work AT ALL - any help changing the settings back to correct Mac Mail settings? I can provide a transcript of the entire tech chat session, if that will help...

    both apostrophes are used correctly, thanks
    doesn't = does not (this is called a contraction)
    it's = it is
    Mac Mail's fault = possessive
    any help with the actual issue? thanks!

  • Downloaded latest version on my laptop. Doesn't syn but only do recognize my iPhone 5 of 2012. Uninstall and re install for few times and it doesn't work at all! Can't back up data anymore. Please advise.

    Downloaded latest version on my laptop. Doesn't syn but only do recognize my iPhone 5 of 2012. Uninstall and re install for few times and it doesn't work at all! Can't back up data anymore. Please advise.

    Uninstall and re install for few times and it doesn't work at all!
    Are you (currently) getting an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)

  • I made a mistake of trying to put 5.0.1 beta 1 firmware on my ipod touch 3rd gen. Now the ipod doesn't work at all. Any suggestions?

    I made a mistake of trying to put 5.0.1 beta 1 firmware on my ipod touch 3rd gen ( non-registered) unsuccessfully. Now the ipod doesn't work at all with any public firmware. Any suggestions?

    You can try putting the iPod into Recovery Mode and restoring it:
    http://support.apple.com/kb/ht1808
    If that doesn't work, you'll need to take this up in the forums to which you have access as a member of Apple's iOS developer program.
    Regards.

  • Upgraded to Mountain Lion, and now my Bluetooth Headset doesn't work? All I get is very loud static. Help?

    I just upgraded my iMac to Mountain Lion and my bluetooth headset doesn't work. All I get is static. Worked fine with Lion. It doesn't work with my new MacBook Pro either.
    I use the headset extensively talking on Skype and gtalk with my partner.
    Help!!!

    If you've tried the SMC reset then try a Pram reset:
    http://support.apple.com/kb/ht1379

Maybe you are looking for