A3 - No import of modified images from iPhoto

Hi All,
Just imported my iphoto library into a fresh Aperture 3 library. All events came over fine, except that only the original photos were imported, not the modified. In Ap 2, modified iphoto images got imported as "iphoto edited".
Any ideas how to get around this? Thanks

I have the same issue. I have somewhere around 2,000 modified (i.e. edited) images and only around 20 of those got picked up in the import and appear in stacks with their originals.
Curiously, if rather than importing the iPhoto library I import a specific event all the original and modified images are properly imported and stacked.
I suspect the issue comes from a corrupted iPhoto library but I've tried rebuilding the library and the result is the same.
At this point, I guess the manual solution would be to import events separately, the obvious downside is that none of the faces info will transfer over. Hopefully there is a real solution out there.

Similar Messages

How can I import images from iphoto with the albums and folders?

How can I import images from iphoto without losing the albums and folders I already created?

In Organizer, you can choose File>get Photos and Videos>From iPhoto.
Importing from iPhoto'09: If in iPhoto, you organize your media using photo references, that is, the media actually does not reside inside iPhoto library package, and are referenced through original locations, Organizer does not create new copies of those media and just refer to the original location. but if your iPhoto media reside inside iPhoto library, Organizer creates a copy all media in your pictures folder, also imports albums and tags and other metadata.
Importing from iPhoto'011: In this case, Organizer always creates a copy of your photos in your pictures folder which resides inside iPohto package. It does not import the albums and other metadata like star rating, caption etc.
Hope this information helps!
regards,
vaishali

Importing Images from iPhoto 11 into Elements 12 Organizer

A friend is having lots of trouble trying to move his images from iPhoto 11 into the Elements Organizer, version 12.
Someone tried to do it for him and he has hundreds of folders in the organizer that don't make any sense and often have only one image in them.
To help him I would like to do two things:
1. How can we delete the entire import and start over?
2. What is the correct way to move these images into the elements organizer?
Thanks for your help.
Mary Lou
PS: It occurs to me that perhaps he needs to export them to his hard drive and then import then into the Organizer. Might this be correct? If it is, he will still need to get rid of all the folder there now.

To anwser the two questions you asked-
1. How can we delete the entire import and start over? : You may select all media in Elements Organizer grid (which he imported from iPhoto) and hit Delete key
2. What is the correct way to move these images into the elements organizer? : The correct way is what he already did. Actually the folder naming convention is same as that of iPhoto. If you see the package contents of iPhoto Library, these folders can be seen there as well. When importing in Elements Organizer, it creates a copy of the iPhoto folder structure and then imports in the catalog.
Thanks
Andaleeb

Iphoto just imported thousands of images from games on my computer.

Iphoto just imported thousands of images from games on my computer, how can i get rid of them without having to sit for hours deleting all of them?

Thsi has been reported a number of times - I've not seen it nor have I seen a definitive cause
The best solution is to go back to your backup prior to the errant import and go forward from then
LN

Portrait-mode images from iPhoto get imported unrotated as landscape

hi there
when i imported my iphoto library i noticed that portrait-mode (upright) images from iPhoto get imported unrotated as landscape.
if i had edited them in iPhoto i get in aperture a stack with the original wrongly in landscape and the edited one correctly upright.
seems to be the case that aperture does not handle the EXIF orientation tag properly.
anybody an idea what i can do?
thanks, olli

So, iPhoto *does not* respect the Exif tag, just like I said. When it imports a photo so tagged it creates a new version and that's what you are seeing - tagged iPhoto Edited. The Original file (including the Exif rotation instructions) is not actually touched - non-rotated.
This is by design.
Apps like iPhoto and Aperture don't respect these tags because of the apps that integrate with them. If, for instance, you pulled a Rotate-Tagged image from your Library to a Pages document then the result would be the wrong way round in Pages, as it, and most other applications, are not aware of Exif display tags.
Regards
TD

Difference between importing images from iphoto via drag & drop vs 'media' button

Hi (long time reader of this community, but my first post),
i'm creating a huge document (approximately 200 pages) in Pages (5.0.1, Using Maverick on a 27 inch iMac).
In the new version of Pages the "Media" button only produces small images that makes it difficult for me to choose which photo i want.
Is there a difference between importing images from iphoto drag & drop vs 'media' button.
Or is it better to just drag and drop the original jpegs (which i also have in a folder).
Is Pages the best program to use for this type of project? it is a profolio with about 4 photos, text, text boxes etc on each of the 200+ pages.
any help much appreciated.

Pages 4.3 might be up to the job. I very much doubt Page 5.0.1 is. It lacks more than 90 features of its predecessor and is very buggy to boot. You probably have an iwork09 folder in your Applications folder. I suggest you trash Pages 5.0.1 and use Pages 4.3 until Apple makestheir new "Eddie Cue" ready for prime time (if, that is, they ever do).

How do I Export Raw images from Iphoto to Adobe Photo Elements 4

I recently purchased Photo elements 4 because I could import images from Iphoto in Raw format and work with them. Everything I have read and the instructional video sent to me by Adobe make it look and sound very easy but so far I have had no success.
I have been able to open Bridge and view photos from Iphoto so it seems to me that everything that I have in Iphoto is automatically transfered to Elements 4. However I can not find my Raw images. What am I doing wrong or failing to do and is there some logical sequence that I have to follow to import Raw images.
I am using a Nikon D200 and just to be safe I have been shooting so the images are saved both in JPEG and RAW.
Thanks for any help you can provide

dakota8,
iPhoto and Adobe Bridge are incompatible, so you need to decide which one you want to use (for which photos). iPhoto is a database, with many flexible features for organizing your library and finding your photos. Bridge is a file browser with some organizing capabilities. You absolutely should not use Bridge or any other application (Finder included) to browse the files inside your iPhoto Library folder, as it will damage the iPhoto database. To verify, click on iPhoto's Help and read the section "About using the iPhoto Library."
If you want to keep your RAW files in iPhoto, then you'll need to open them from iPhoto. As Dave E said, this can be done by setting the iPhoto pref to export RAW files. You also need to set PE 4 as the external editor in iPhoto's preferences. With this setup, you can select photos using iPhoto, open the RAW files into PE 4, then edit. Now comes the wrinkle in the workflow. Normally, you would do a Save to cause your edited file to be saved back into the iPhoto library. This Save, not Save As, requires that the filename and extension stay the same. Works great with jpeg files. However, once you edit the RAW, the extension (and file format) must change. Save will not work, because any save at this point is treated like a Save As. So you have to Save As to a folder OUTside of your iPhoto Library, and then import it in as a new file. There will be no link between the edited version and its unedited RAW file. You could organize inside iPhoto to display the edited file beside its original RAW, or keep separate rolls for the originals and edits.
With that in mind, you might not want to save the RAW files in iPhoto at all. You could create your own filing system for them, which you would browse using Bridge. Upload using Image Capture to save your files to a folder of your choice. Once you edit the RAW files and save as another format, you could them import into iPhoto for cataloging or further editing. You'll just have to find the system that works best for you.
BTW, don't save your edited RAW files as Adobe RAW. I tried and discovered that iPhoto refuses to import them at all.
I have been able to open Bridge and view photos from Iphoto so it seems to me that everything that I have in Iphoto is automatically transfered to Elements 4.
There's no transferring involved at all. Bridge is rooting directly inside the iPhoto Library folder. Did I mention that it's best to avoid this?
However I can not find my Raw images.
When you import a file it is saved into the Originals folder. Your RAW files are there, along with any video clips you may have imported.
iPhoto automatically creates a jpeg version of your RAW files and stores it in the Modified folder. It has to do this in order to display the picture on your screen. With video clips, a jpeg of the first frame is created for display purposes.
I am using a Nikon D200 and just to be safe I have been shooting so the images are saved both in JPEG and RAW.
If you import both versions into iPhoto, then you have
Originals - RAW
Modified - jpeg
Originals - jpeg
(Modified - jpeg - if you edit the jpeg version or if they are auto-rotated to portrait orientation)
I don't shoot in RAW, so I can't really comment about which workflow would be the most efficient. I just played with it long enough to realize that there is no easy way to do it.
Regards.

I just purchased Aperture and have 20,000 photos in my iPhoto Library. Can I import only certain events from iPhoto into Aperture or do I have to merge the whole iPhoto library?

I just purchased Aperture and have 20,000 + photos in my iPhoto Library. I see that I can create a unified library between the two. I am wondering if I can import only certain events from iPhoto (like only 2014 events) into Aperture or do I have to merge the whole iPhoto library? Are there any benefits to bringing the whole iPhoto library over to Aperture (iPhoto is SO SLOW for me, I wonder if it is because I have so many photos). Or, any detriment to only bring a few events over?
And, if I don't merge the two libraries, I assume that means I cannot do it at a later date?
Help. My local Apple store has had very few Aperture workshops, and the next one is like 2 months away.

Thank you so much for this information. Here are some responses/comments:
Disk space - it says 114.43 GB out of 499.25 GB free. I have no idea if that is enough.
iPhoto version is 9.5.1
Again, I am not sure how to know if I have 3rd party software...but I don't think I do. Is 3rd party software anything non-apple?
I will try rebuilding the library. if that doesn't help, maybe I need more memory...? That is what Apple suggested, but that, of course, means buying something else. I've already bought APERTURE, on their recommendation...
It wasn't, and they told me it was slow because I had too many photos for iPhoto to handle and that I should buy Aperture. Which I did.
What is your iPhoto version? Are you using the most recent version 9.5.1?
iPhoto can handle 20000 photos, no problem. Your computer can be slow for several reasons:
The most common problem for slowness - insufficient disk space. Don't let your free disk space drop below 20 GB of free space, better more. If the operating system does not have enough working space and the applications you are using, you will notice a very lagging behaviour.
Older or incompatible softweare can cripple your mac. Do you have any older third-party software installed, that might have installed incompatible kernel extensions?
Aperture might be slow or keep crashing, if you imported a corrupted image or incompatible video, that cannot be processed. Then Aperture will try over and over again to create previews and never succeed. You could test for this situation, by launching Aperture with the Shift-key held down. This will defer the generation of previews. If Aperture will launch and work better this way, you probably have some bad media in your photo library.
Another problem to check for is a corruption of your Aperture/iPhoto library. You have run the First Aid Tools to repair the iPhoto Library, but have you ever tried to rebuild the library? See this post by Old Toad: Rebuild iPhoto Version 11

Importing into Aperture 3 from iPhoto as referenced files

Apologies if this has been asked before, but I can't find anything this topic...
I've just upgraded to Aperture 3. In Aperture 2, my way of working was to store RAW images in iPhoto and import as referenced files into Aperture. This was very straightforward. Now, I have 2 problems:
1 - I can't see how to import referenced images from iPhoto. If I use the import command, my iPhoto images don't show up in the list of locations to import from; if I use the iPhoto browser in Aperture and drag from that, it imports the file into the Aperture library rather than importing as a referenced file...
2 - If I import using the iPhoto browser, not only does it import into the Aperture library, it imports the jpeg preview rather than the RAW file.
The only way I can see to get the RAW file into Aperture is to find it in the Finder then import into the Aperture library. This seems excessively long-winded and also duplicates the file, using up extra disk space.
I'm using Aperture 3.0.1 and iPhoto 7.1.5
Thanks in advance for your input

I have not imported an iPhoto library because my workflow is to to use Aperture for storing and archiving Raw files and iPhoto for exported jpegs.
However the instruction in the Aperture 3 PDF Manual are as follows:-
To import your iPhoto library
Choose File > Import > iPhoto Library.
Select the iPhoto library in the dialog that appears.
Choose a location for the imported images by doing one of the following:
• To store imported masters in the Aperture library: Choose “In the Aperture Library” from the Store Files pop-up menu.
• To import the files as referenced images stored in their current location on your hard disk: Choose “In their current location” from the Store Files pop-up menu.
Tip: Choosing“Intheircurrentlocation”isrecommended.Whenyouchoosethisoption, Aperture refers to the original files in their current location and does not have to duplicate the files, which doubles the disk space needed to store the files. For more information about referenced images, see What Are Managed Images and Referenced Images?
• To store imported masters as referenced images in the Pictures folder on your hard disk: Choose Pictures from the Store Files pop-up menu.
• To store imported masters as referenced images in a location other than the Pictures folder: Choose “Choose” from the Store Files pop-up menu and select a folder. Choose “No folder” from the Subfolders pop-up menu to specify that the files be stored as separate, individual files in the selected folder. You can also specify that Aperture create a hierarchy of subfolders with specific folder names to hold your files.
=====
This extract is from page 169. Perhaps it clarifies and identifies a step you have omitted.
AW.

Importing RAW (CR2) images to iPhoto (7.1.1)

I'm having problems importing RAW (CR2) images to iPhoto (7.1.1) from my Canon Powershot G9. It imports the JPEGs with no problem, but says the following for RAW (CR2): "The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data".

Yellowfish
That would be because the G9 RAWs are not supported at this time.
Regards
TD

Removing Images from iPhoto

I don't know how to remove images from iPhoto 8 or 6. I prefer to use PhotoShop Elements and I want to move the iPhoto images from wherever they are into a separdate folder so that I can put them into Bridge CS3 and use Elements. But I cannot figure a way to do this. Thanks.

Terence
I purchased the Duplicate Annihilator that you recommended and with about an hour it had detected almost 5,000 duplicates, so I went ahead and identified them, also did the thumbs and found about 300 there, so I put them in the trash and deleted all that came up and now I am down to 5,000 - pictures. I will run it again tomorrow
Thank you for your help, and a bargain to boot, I must tell my Mac store about this!
Very much appreciated.... the reason that I hesitated to bring over the old iPhoto is that a few months back a bunch of my pictures from there 'disappeared' -so I didn't want to import a corrupt application?
Happy trails
Jan

How can i delete images from iPhoto?

I can not delete images from iphoto. When I try to move pictures to the trash they do not move, and if I try to delete them by pressing "right click> Trash" they do not move! pretty much the only way I can delete pictures from iphoto is to delete the library.
Can anyone help me? I'm about to permanently delete iphoto from my macbook pro.
it is nerve-wracking!

Where are you trying to move these photos from? The following are the key combinations for moving from different entities in the library:
Deleting Photos from an iPhoto Library:
1 - from the Event or Photos mode: select the photo(s) and use the Delete key to move the photos to the trash bin. Then empty the iPhoto Trash bin as follows:
2 - from an album, smart album, book, slideshow, card, etc: select the photo(s) and use the key combination of Command+Option+Delete to move the photos to the trash bin. Then empty the trash bin as above.
If none of the above work try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If the problem persists in the new library make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

I have Office 2011 which includes Word. Ever since downloading Mavericks, when I try to send a two-page word document, some recipients get only one page. Also sometimes when I burn an image from iPhoto on to a disc, only part of the image appears. Why?

I have Office 2011 which includes Word. Ever since downloading Mavericks, when I try to send a two-page Word document by email, some recipients get only one page. Also when burning an image from iPhoto (usually no larger than 1mb) on to a disc, only part of it appears. It appears to have been magnified so that only a part of the image appears. Can anyone enlighten me as to what is happening? And how to fix it??

I have Office 2011 which includes Word. Ever since downloading Mavericks, when I try to send a two-page Word document by email, some recipients get only one page. Also when burning an image from iPhoto (usually no larger than 1mb) on to a disc, only part of it appears. It appears to have been magnified so that only a part of the image appears. Can anyone enlighten me as to what is happening? And how to fix it??

How do I delete images from iphoto after I export them to make room on my hd

I have exported images from iphoto onto an external hard drive to make room for more images on the macbook pro - whenI deleted the files from iphoto page they still seem to be sitting somewhere on the laptop, number are still high and I need to delete them, where do I go to delete the files that have been exported to the external storage, I do not have time machine.

What version of iPhoto?
Did you empty the iPhoyo Trash?

How do I import a camera video from iphoto to imovie? I went to file, import, camera archives and the video I want I am not able to select. I even tried dragging it from my desktop, but it will not allow me to do so. Please help?

How do I import a camera video from iphoto to imovie? I went to file, import, camera archives and the video I want I am not able to select. I even tried dragging it from my desktop, but it will not allow me to do so. Please help?

Use File/Import/Movie and navigate to the file.

A3 - No import of modified images from iPhoto

Similar Messages

Maybe you are looking for