A3 report setup

Hi
I'm using
Report Builder 10.1.2.3.0
I have a requirement to produce a report in A3 format.
so far I have set the paper layout, section Width=16.5
and Height = 11
as well as
Data Model: System Parameters, Orientation, Initial Value to Landscape
Is there anything that I am missing??
Thanks in advance

Hi,
That's enough for A3 report and you can choose Landscape when you define report in EBS.

Similar Messages

Incident Management Reporting Setup

Hello!
I try to setup the incident management reporting.
I can't find any help or guide for this process (only http://help.sap.com/saphelp_nw70/helpdata//EN/51/7dd0c003414e80a6847f5c7437ea63/frameset.htm). Is there something else?
In webdynpro "Incident Management Reporting Setup" I have to configure the RFCs (you can open it with SOL work center --> Incident Management --> Reports --> Message Reporting --> Setup)).
The first field is called "RFC from Solution Manager to BW System", contains NONE and I can't change it.
The second field is called "RFC from BW System to Solution Manager". Here I created an RFC entry, but now I can't change it too. Is there a trick to edit this fields once again?
Thankx and regards,
Ralph

Hi,
Would this be helpful ?
Please follow the path below which provides details on the setup of
incident management in EHP1.
https://websmp110.sap-ag.de/okp
- SAP Solution Manager 7.0 - EHP1 (free of charge) <In left tree>
- opeeration with SAP solution manager
- Monitoring of Mission-critical Processes: Incident Management
- Incident Management - Initial Configuration
Hope this helps,
Cheers
SH

Movement Statistics Report setup

I am doing the setups for Movement Statistics Report but no data is coming can any body help me.

Review Note: 400098.1 - 11i Movement Statistics Intrastat report is not generating any data
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=400098.1

Earlywatch report setup - step by step

Hello All,
I was hoping to get some documentation, best practice or something, on the set up of earlywatch reports within solution manager. I'm new enough to SAP and everything with it that I will spend an hour on service marketplace but not find anything on how to do something. my email is [[email protected]]. Thanks in advance.

Hi Ryan,
The setup of SAP EarlyWatch Alert is descibed in the Application Help of SAP Solution Manager.
[http://help.sap.com -> SAP Solution Manager|http://help.sap.com/content/documentation/solutionmanager/index.htm] -> SAP Solution Manager -> Solution Monitoring -> SAP EarlyWatch Alert
Best regards,
Ruediger

Custom report setup in OTM

Can anyone please guide me for setting up the Custom report in OTM (Oracle transportation Management)
Any help is highly appreciated.
Regards,
-

Can anyone please guide me for setting up the Custom report in OTM (Oracle transportation Management)
Any help is highly appreciated.
Regards,
-

Crystal Reports setup problem (?)

Hello,
I have recently taken over the role of creating/updating our Crystal Reports and have of course installed the software on my PC just as is explained in the installation guide and have set up the ODBC datalink.
I decided to leave it installed on the old user's PC until I got it working properly just in case I had any problems. Good job I did.
The reports we create are used by a bespoke software called Access Supply Chain.
When I create/modify a report on this newly installed instance, save it to our reports folder and reference it in Supply Chain, the report only blinks on-screen for a fraction of a second and then vanishes.
If I then go to the old machine and open the report there and re-save, it works fine.
I've checked settings between both machines and can't find anything that differs.; I'm possibly missing something very simple.
Could anyone give me any clues as to what the problem is?
Many thanks
- Chris

Chris,
The forum that you have posted your question in is for questions related to the SAP Business One SDK. Your question is related to the Crystal Report Writer. You should post these types of questions in the Business Objects Forum here on SDN at
https://www.sdn.sap.com/irj/boc
or possibly here ...
All about Printing & Reporting using ALD, PLD, XLR and Crystal Reports
These two areas may get you better and faster results.
Eddy

Regarding Crystal Report Setup Installation

Hi All,
I am unable to instal crystal report designer. The crystal report add on has been successful installed in SAP B1 and it is also featuring in the main menu. But the "Account set up" option is not working. None of the option of the crystal reporter is working and an error message is shown while the add on is started.
The Crystal Designer outside SAP is also not getting installed. Error message is showing- "Error Applying transforms"
Edited by: Rui Pereira on Jan 26, 2009 5:45 PM

yes I have. But the I m then not able to do the Account set up. The crystal Reports options are visible in the main menu but not responding.
Can you suggest where can I get the crystal report set up files. May be the files I have used to install may get corrupt as they are very old and were the old evaluation version files.
Is it true that now crystal report package is free and full version released for integration with sap.

Oracle Reports setup in Portal

Hey
I just have a couple of questions about Oracle reports being run through Portal that I was looking for some help on. Here they are:
I am using the Reports Portlet Parameter Form (which includes the 'Parameters' and 'Schedule' tabs) build into Portal to run my oracle reports, but I was wondering if this is the recommend way to run my oracle reports in Poral or if there is something better?
A few users have asked me to remove/hide the 'schedule' tab on the parameter form, but I can't find a way to do that, do you know of a way?
And another thing I was asked is if we could create own parameter forms to run the reports, and I told them yes, but would that involve creating a new form for every report where the parameter list is different? I thought it would be, but I wanted to be sure first. And would these new manually created forms be easy to integrate into portal?
Thanks for your help.

hello,
submitting your report in the url using a key (yourKey) defined in the cgicmd.dat file would look like
http://<yourserver>:<yourport>/reports/rwservlet?yourKey
regards,
philipp

Ccm4 - cdr analysis and reporting setup plugin install probs

cdr analysis and reporting plug-in installation error message 'could not connect to ccm database'
Any ideas

You may want to search for a document "Cisco CallManager Serviceability Administration Guide" depending on your version for reference.
As for your problem:
you can try to login in the CDR "https://xxx.xxx.xxx.xxx/art/Logon.jsp" using,
username:admin
password:cisco
and assign the CDR administrator rights, afterwhich this initial default account will be disabled.
Hope this will solve your problem.
Note:CDR may be enable by default. You may need to change CDR parameters in order to get your 1st reports.
Gd luck
Cash

How to overcome the Memory leakage issue in crystal report 2008 SP2 setup.

I have developed the small windows based application tool with help of Visual studio 2008 for identify the memory consumption of crystal report object. It helps to load the crystal report objects in the memory and then released the object from the memory. The tool simply does the u201CLoading and Unloadingu201D the objects in the memory.
The tool will be started once u201CTest_MemoryConsumption.Exeu201D executed. The u201CTest_MemoryConsumption.Exeu201D consumes u201C9768 KBu201D memory before load the crystal report object in memory. It means, 9768 KB is normal memory consumption for run the tool.
Crystal report object initiated by the tool and object help to load the report in memory once the tool initiated the crystal report object. Now u201CTest_MemoryConsumption.Exeu201D consumes u201C34980 KBu201D memory during the crystal report object creation and report load process. The actual memory consumption of crystal report object is 34980u20139768=u201C25212u201DKBu201D.
The memory consumption u201C34980 KBu201D will be continued till the end of the process. The memory consumption will be reduced to u201C34652 KBu201D from u201C34980 KBu201D once report load process completed. It means, u201C328 KBu201D memory only released from the memory consumption. Tool enables the Release command for the crystal report object. But crystal report object does not respond to the command and will not release his memory consumption.
The memory consumption u201C34652 KBu201D will be stayed in the memory once job ends. If i again initiate the crystal report object then it crystal report object start to consume the memory from 34652 KB.
Database objects and crystal report objects are properly used in the tool. The object release commands properly communicated to crystal report setup. But the u201CCrystal report service pack 2u201D setup unable to respond the commands which has enabled from .Net Tool. Crystal report objects are properly initiated and disposed in the tool. But the crystal report unable to release from the server.
The memory consumption will be reduced once the server restarted or kill the application.
Crystal report 2008 and crystal report 2008 SP2 setup available in the server.
Microsoft .Net Framework 2.0 SP2, Microsoft .Net Framework 3.0 SP2 and Microsoft .Net Framework 3.5 SP1 are available in the server,
Could you please suggesst how to avoid the memory consumption keep increasing and how to release the memory consumption once the crystal object disposed???

Hi Don..
My case is different one. I hope, the problem with Run time Installation setup file (Crystal report 2008 Serivce Pack2 installer) which we installed in the server.
Let me explain with Live scenario which our client faced in crystal report 2008 Service pack2 Installer.
Our client is using a application to help to print their reports. The application is developed with Windows service.
Windows service keep on running in the server. Windows service executes the client 's crystal reports( Labels Report, Stock report) which designed for clients need and the reports will be printed from printer.
10 Same type report (Label Report) will be printed in 1 minute. Reports are not printing during non business hours. But the windows service keep on running. Memory cosumption of application will be 160 MB in business hours.
For Example, On Monday the application memory consumption starts with 160 MB. The Memory consumption will be reached 165 MB in peak business hours. Then the memory will be ended in163 MB in the End of Monday. It means, The memory consumption will be in 163 MB during the non business hours. Reports will not be printed in non business hours.
On Tuesday, the application memory consumption starts with 163 MB and it will be reached 168 MB during the peak hours. The Memory consumption will be ended in 165 MB in the end of Tuesday. The same process contiues till friday. End of friday, the memory consumption of the application will be ended with 170 MB.
Application Memory Consumption slowly increasing in the server. In 5 days, Memory consumption reached Threshold value (170 MB) of the server. Application gets hanged up once the memory consumption reached 170 MB. We got the error messages as "Attempted to read write protected memory " / "Not Enough memory for process". If we restart server / If we restart the service then memory consumption of application get reduced to 160 MB.
From the above scenario, We came know that the either the problem with Application object or the problem crystal report object. In the application, We have checked dispose methods of application objects completly. I am sure that application objects are properly disposed in the application. I hope the problem not with application objects. The problem with Crystal report objects.
Application properly communicates the dispose methods to crystal report objects. Crystal report objects are not released from
the memory.
Crystal report 2008 Serive Pack 2 setup installed in the server.
As you said, If Crystal report runtime is not released from memory then memory consumption keep increase??? In service oriented architecture application, how to unload the crystal report runtime??
Do you any fix for this kind of issue??
Willl Crystal report 2008 service pack 3 help on this issue??

Changing font in Oracle Report in PDF output

Hi,
I have created reports using dev10g(report builder). I can run report from client side in pdf format but I want to change the font (i.e from courier to Arial narrow).
How can I do this?
Is there anyone who can help me?
my unifont.ali file is:
# $Header: uifont.ali@@/main/22 \
# Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
# Copyright (c) 1999, 2004, Oracle. All rights reserved.
# $
# $Revision: tk2/admin/uifont.ali#0 $
# Copyright (c) 1994, 2004, Oracle. All rights reserved.
# All Rights Reserved.
# DESCRIPTION:
# Each line is of the form:
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
# The <Face> must be the name (string/identifier) of a font face. The
# <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
# value or a predefined identifier/string. For example, both US7ASCII
# and 1 are valid <CharSet> values, and refer to the same character set.
# The <Size> dimension must be an explicit size, in points.
# The following is a list of recognized names and their numeric
# equivalents:
# Styles Numeric value
# Plain 0
# Italic 1
# Oblique 2
# Underline 4
# Outline 8
# Shadow 16
# Inverted 32
# Overstrike 64
# Blink 128
# Weights Numeric value
# Ultralight 1
# Extralight 2
# Light 3
# Demilight 4
# Medium 5
# Demibold 6
# Bold 7
# Extrabold 8
# Ultrabold 9
# Widths Numeric value
# Ultradense 1
# Extradense 2
# Dense 3
# Semidense 4
# Normal 5
# Semiexpand 6
# Expand 7
# Extraexpand 8
# Ultraexpand 9
# Styles may be combined; you can use plus ("+") to delimit parts of a
# style. For example,
# Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
# are equivalent, and either one will map any Arial that has both Italic
# and Overstrike styles to a 12-point, bold, italic Helvetica font.
# All strings are case-insensitive in mapping. Font faces are likely to
# be case-sensitive on lookup, depending on the platform and surface, so
# care should be taken with names used on the right-hand side; but they
# will be mapped case-insensitively.
# See your platform documentation for a list of all supported character
# sets, and available fonts.
# BUGS:
# o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
#===============================================================
[ Global ] # Put mappings for all surfaces here.
# Mapping from MS Windows
"arial narrow" = "Arial Narrow"
Arial = helvetica
"Courier New" = courier
"Times New Roman" = times
Modern = helvetica
"MS Sans Serif" = helvetica
"MS Serif" = times
"Small Fonts" = helvetica
# Mapping from Macintosh
"New Century Schlbk" = "new century schoolbook"
"New York" = times
geneva = helvetica
#===============================================================
[ Printer ] # Put mappings for all printers here.
#===============================================================
[ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
Roman = palatino
Script = "itc zapf chancery"
FixedSys = courier
System = helvetica
# Mapping from Macintosh
"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
fixed = courier
clean = times
lucidatypewriter = courier
lucidabright = times
#===============================================================
[ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
Roman = palatino
Script = "itc zapf chancery"
FixedSys = courier
System = helvetica
# Mapping from Macintosh
"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
fixed = courier
clean = times
lucidatypewriter = courier
lucidabright = times
#===============================================================
[ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
helvetica = univers
times = "cg times"
clean = "antique olv"
fixed = courier
lucida = univers
lucidabright = "cg times"
lucidatypewriter = courier
"new century schoolbook" = univers
terminal = "line printer"
#===============================================================
[ Display ] # Put mappings for all display surfaces here.
#===============================================================
[ Display:Motif ] # Put mappings for Motif displays here
# Fix for bug no 778937 DO NOT MOVE!
Roman.....sjis = lucida.....jeuc
Script.....sjis = lucidabright.....jeuc
FixedSys.....sjis = fixed.....jeuc
System.....sjis = lucida.....jeuc
.....sjis = .....jeuc
# Mapping from MS Windows
Roman = lucida
Script = lucidabright
FixedSys = fixed
System = lucida
# Mapping from Macintosh
"Avant Garde" = helvetica
"Bookman" = times
#===============================================================
[ Display:CM ] # Put mappings for all CM displays here.
# These are DEC-specific, and may need localization
*..Blink = Blinking
*..Inverted+Underline.Bold = ReverseBoldUnderline
*..Inverted+Underline. = UnderlineReverse
*..Underline.Bold = UnderlineBold
*..Inverted.Bold = ReverseBold
*...Bold = Bold
*..Underline = Underline
*..Inverted = Reverse
* = Plain # The font of last resort
# Oracle Report PDF sections
# Three new sections have been added:
# [ PDF ] - Used for font aliasing and Multibyte language support
# [ PDF:Embed ] - Used for Type 1 font embedding
# [ PDF:Subset ] - Used for True Type Font subsetting
[ PDF ]
"helvetica narrow" = "Arial Narrow"
# This example shows how to rename helvetica font to Courier font
# helvetica = Courier
# You can Alias specific styles of font as below
# helvetica.12..Bold.. = Courier.14....
# "Lucida Bright".12..Bold = "New Century Schoolbook"
# Support for Far Eastern Languages:
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
[ PDF:Embed ]
# This example shows how to embed Type 1 helvetica font into the PDF file:
# helvetica = "helvetica.afm helvetica.pfa"
# You need to specify the .afm file before the .pfa file.
# The font files must exist in one of the folders specified in REPORTS_PATH.
[ PDF:Subset ]
"arial narrow" = "Arialn.ttf"
# This example shows how to subset Arial True Type font into the PDF file:
# helvetica = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
# Subsetting TrueType Collection fonts:
# Typically, a TTC font contains several fonts in one file. For example,
# the TTC file, msgothic.ttc consists of three fonts in the order -
# MS Gothic, MS PGothic and MS UI Gothic. To subset MS PGothic, the
# entry in the PDF:Subset section of uifont.ali would be:
# "MS PGothic" = "msgothic.ttc,1"
# NOTES ON PRECEDENCE OF PDF SECTIONS:
# If you have entries for a same font in many PDF sections, then Font
# Aliasing entry will take precedence over Font Subsetting entry. Entries
# in Font Subsetting will take precedence over the entries in Font Embedding
# section.
# Generic entries for a font must follow more specific entries for the same
# font. For instance, if you want to subset helvetica Plain, helvetica Bold,
# helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
# [ PDF:Subset ]
# helvetica..Italic.Bold.. = "Arialbi.ttf"
# helvetica...Bold.. = "Arialb.ttf"
# helvetica..Italic... = "Ariali.ttf"
# helvetica..... = "Arial.ttf"
# If helvetica..... entry appears in the top of the list, all the styles of
# helvetica font in the layout will be subset as helvetica Plain font.
Thanks,
Rafikul

Welcome to OTN
Check the two link..
1. Re: Oracle Reports 10g Fonts issue
2. Re: Adding new font to my Reports Setup
Hope this will help you
Hamid
If someone's response is helpful or correct, please mark it accordingly.

User complaining report very slow?

Hi Gurus,
There is an interview question in EBS 11I:
“We have lot of issues in here, We facing some problem, the Discoverer users always complaining getting report very slow, sometimes it gives time-out error. What you think, how to resolve the problem?”
What are the answers they are looking from us?
Usually they are not satisfied with couple of answers, if we answered/verified each answer, the interviewer reply “No, …No…No……….. ”.
So tell me the answer what they are looking for. Please provide full possible scenarios.
Thanks,

Here is my 2 cent comments:
1. network issue
you can compare the discoverer reports with Oracle reports or Application module to identify this, usually this is not the case
2. tune the backend query
you can run the discovery report backend sql query in TOAD, if the query is very slow, then the query has performance issue, you can modify the join condition to improve the performance
3. add Parameter to Discoverer report
sometimes it is very difficult to modify the backend sql query, you can add parameter to discoverer report, when end user run the report based on the parameter, data can be quickly displayed. for example, currently report will retrieve all invoices for the company, if you add a year parameter, 2010, the report only retrieve the invoice of 2010.
4. change timeout time
timeout issue is a discoverer report setup issue, you can change the timeout time for example from 30 minutes to 60 minutes.
Thanks

CRVS2010 Beta - Crystal Report Installation problem

Hello,
I have visual studio 2010 professionnal edition (Version 2010 10.0.30319.1RTMrel). (French edition)
I would like to install and use Crystal Report, so:
- I dowloaded the Crystal report setup (cr4vs2010.exe).
- After installing the setup, I want to create my first report in my asp application (Add\New item\Reporting\Crystal report) and each time I do that I am prompted for downloading the crystal report suite.
Help appreciated, thanks.
Edited by: Don Williams on Aug 16, 2010 9:50 AM

Hello Stef,
I updated the subject line to indicate you are using Beta.
Currently it's only supported on English builds of VS 2010.
Read the link at the beginnign of this forum for more info.
Thank you
Don

Blank reports

Hi,
I am calling reports from forms. The application used to work perfectly fine. Then one day, my PC (WIN2000) was kind of slow, so I run Disk Cleanup and Disk Defragmenter.
Then now, I can't even run my report.. my forms seems works ok. but when I call the report, it just gives me a blank page. And when I check the the job/status through http://machinename:port/reports/rwservlet/showjobs?,
it says that it is still running.
It seems like I checked everything already.
1. My OC4J instance is up and running.
2. i did 'rwserver -install reptest'
and the server is up and running.
I don't know what else to check.
Anybody, please help.
thank you very much.

Hello Melani,
Please verify whether your Reports setup is working fine by running a test report (say test.rdf under $ORACLE_HOME\reports\samples\demo\reqfiles) using the Reports runtime (rwrun) and the Reports client (rwrun).
You could also enable tracing in $ORACLE_HOME\reports\<server_name>.conf and take a look at the Reports server/engine trace to determine why your report is not completing.
Thanks,
The Oracle Reports Team.

Error while opening Crystal report 2008

Hi All,
I get the following error when I try to open crystal report 2008 trial version:
"Entry Point Not Found The procedure entry point ?CanStackDump@SLogger@CXLib400@@SA_NXZ could not be located in the dynamic link library cxlibw-4-0.dll."
To over come this I tried to install crystal report 2008 SP1 but it didn't help,
even I uninstalled all Crystal report setup and tried to install Crystal report 2008 server even that didn't helped.
Kindly suggest some solution.
Thanks
Deep Kulshrestha

Hi Deep,
Try these links:
http://boardreader.com/thread/ERROR_SvcMgr_exe_Entry_Point_Not_Found_5cb3X2r3z.html
http://www.tek-tips.com/viewthread.cfm?qid=1505754&page=11
I hope they will help.
Jesper

A3 report setup

Similar Messages

Maybe you are looking for