A30 audio wont play after XP pro install

My A30 crashed a few days ago, and I have done a complete format and re-install of XP pro. A number of features did not subsequently work, such as power management, touch pad, and audio. Touch pad and power management have been fixed with the relevant drivers, however, I cannot get any audio to play. Its almost as if the sound card is not being recognised, though the drivers are installed. Am at a complete loss so all help gratefully received

Hello,
at http://eu.computers.toshiba-europe.com in the driver download section you will fin the current Realtek sound driver for the A30 series! Try to install it!
Otherwise you should install the sound driver from the tools & Utilities CD!
Bye Tok

Similar Messages

Audio wont play after importing from camcorder

I import video fine via the camcorder, the audio plays fine while importing but when I went to edit it, the audio track stops playing after about a mintue or two.
It shows up in the timeline, I have it checked to play, but for some reason it does not play, any ideas why this happens? I extracted a small clip of audio, and it still wont play. Any help is appreciated!

I'll double check at home the cam is there, I was messing with the settings at one point, new cam but don't think I changed any audio settings, just put it to stereo....

Audio wont play when pc is hooked to tv

ive followed the instructions on how to hook my pc to my tv to stream video and sound and the vidio is vissible but the audio wont play. vollume is up and the imput out put is corectly in place. why cant i hear audio?

Hi precious5959,
Welcome to the HP Support Forums!
I am happy to help you with your audio problem, but it would be helpful to have the product number and OS version. Please read the following documents if you need help in finding that.
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
What sort of connection are you using between your computer and tv? For some connection types, audio is not included and requires an additional audio cable.
Some general information that may be helpful for you:
Connecting a Monitor, Projector or TV (Windows 8)
Overview of HDMI and DVI Connections for PCs
In the following link, please pay particular attention to the section on Troubleshooting TV setup as a second monitor.
Using Two or More Monitors with One Computer (Windows 8)
Other things that could help would be to insure that you have updated all the video and audio related drivers for your notebook. The drivers can normally be found from the product page for your notebook, or from the original chipset manufacturer. I would link that page to this, but I need the exact product/model number to get the right page for you.
Another thing that could help with drivers is the: HP Support Assistant as it can automate the driver updates for you.
Also here are some links to videos on youtube that could be helpful to you. They cover a range of audio related issues, and could be very informative.
Fixing Your PC's Sound - Part 1: Selecting the Right Speakers
Fixing Your PC's Sound - Part 2: Checking Volume Controls and Connections
Fixing Your PC's Sound - Part 3: Quick Fixes in Windows Vista
Fixing Your PC's Sound - Part 4: Setting up Digital Sound
Fixing Your PC's Sound - Part 5: Finding and Installing Audio Drivers
Fixing Your PC's Sound - Part 6: Updating Codecs
Please let me know if this has been helpful. or if you need any additional assistance.
Regards
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

I have rented a film and it wont play after 16mintues?

i have rented a film and it wont play after 16mintues?

When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
CLICKY CLICK-----> Help us to help you on these forums

5G iPod wont play after awaking from sleep

Im not sure why but all the previous posts for this very same problem have been archived without answers. When my ipod is left to go to sleep on its own, after its woken from sleep mode it wont play - even though the default pause icon changes to the play arrow the counter never starts and no audio is heard. I must turn it off and then on again to begin playing. If I turn it off ( hold play button ) instead of ever letting it go to sleep it works perfect every time. I see many others posting for the same issue in the past - I smell Firmware Upgrade !!!
Anyone found any other possible fix?
Thx - Mike

I see helpful answers as 2 and solved answers as 1, but I dont see where those answers are, however, I think your G5 has the same problem I do. For some reason it takes a LOT of smackin me around in the morning to wake me up. I've had this problem for years, and I still don't have a solution.
Seriously, the problem will take some troubleshooting, but do you have any "other" enhancements in your system preferences or other apps loaded that might have an option to put your computer to sleep? if so, you may have a setting there that is putting your mac to sleep immediately after waking it. Also, try going to the system preferences and selecting "never" for putting the computer to sleep, then go to your "Apple" icon and manually put your mac to sleep (first option above restart) and then move your mouse or try some keys to wake it up and see if it stays awake. If the mac stays awake, then I would say this leads me to believe its your system preferences giving you the conflict.

How can I add the audio content cd after logic finished installing ?

There was an eror installing the Audio Content CD 1 and I did not notice. Everything else installed properly, Audio Content CD 2, Jam Pack, but how can I add the Audio Content CD1 after Logic has finished installing?
If you can help me please be very specific as to how to do it so that I can follow the directions properly.
Please help me.
Thanks

Hi
You could re-run the installer, or, once you have updated to Logic 9.1.8 you could use the "Download Additional Content" function in the Logic Pro menu. It will tell you what is installed and what is incomplete.
CCT

Youtube audio keeps playing after I leave video page.

Video and audio play just fine but when I backtrack or close tab the audio still plays. If i reload the tab the audio will stop but i've never had this issue before. I have the most current firefox downloaded and have even deleted and re-downloaded the browser twice.

First you have two Flash Player installed
*Shockwave Flash 12.0 r0
*Shockwave Flash 11.5 r502
Try disable the hardware acceleration:
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

New Shuffle wont play after downloading Songs from Rhapsody

I just bought the 2nd gen. shuffle and after loading songs from rhapsody, it show them on the IPOD list but the ipod wont play. It blinks green-orange-green- orange and then nothing. I tried reseting it. Any ideas?

http://learn.rhapsody.com/faq?pageid=redirectLearnDynamicPathPage&pageregion=A1& src=rotw.learnoverview&pcode=rn&opage=rotw.learnoverview#ques3
"Will Rhapsody work with iPod?
iPods are not compatible with the Rhapsody To Go subscription service. You may, however, use the iPod to play tracks purchased on Rhapsody. Or view the MP3 players compatible with Rhapsody To Go."
That is from their website, even though countless posts on these forums have said their files are not compatible. So who knows. If I couldn't get my music from rhapsody on my iPod, I personally woudn't be too surprised, it's protected music, and it's not meant for iTunes it's meant for Real player. It looks like it depends on if your music was subscription or not. You might also read this.
http://real.custhelp.com/cgi-bin/real.cfg/php/enduser/stdadp.php?pfaqid=5081
I hope you figure out how to get it on your iPod though.
Macbook Mac OS X (10.4.7) iPod Video 5th Gen (30Gb), iPod w/Color Display

Audio stops playing after applying effect

First of all, I'm a beginner, so any help is appreciated. I' ve strung a few clips together including a photo and some video. I imported a sound file to go with the clips. Everything worked fine until I applied an effect to the video clip (contrast and brightness). Now when I play back the movie, the audio stops playing soon after beginning the video clip. I've checked the volume of the audio and it's fine.... as soon as I undo the effect, it all plays fine again.
Any suggestions?
powerbook G4 Mac OS X (10.3.9)

Hi jdoo and welcome!
Try extracting the audio from that video clip before
adding the transition/effect.
Thanks for your suggestion. I just discovered what the problem was. When I applied the effect I didn't notice that there was a progress bar and that it took quite a while for the effect to be totally applied. I was trying to play the movie back while processing was taking place and that interrupted the audio.
powerbook G4 Mac OS X (10.3.9)

Audio wont play in preview

Hi
I have dropped and dragged a 'aiff' audio file into the preview drop zone audio box, but the audio just wont play during the DVD preview.
Any ideas?

Hi Mantas65
Welcome to apple discussions. Assuming the stop motion button within preview is not currently activated, are both sliders for audio at least half way? There's a slider for the preview that controls audio level and also one within the audio well for the aiff you are planning to use. Let's take an example (as in the photo below of preview within iDvd):
click here:
At the foot of the above image, move the slider to the right so you can listen to the current audio for Revolution Main for example. Now drag and drop the desired audio file you wish to replace it with. In the example below I've chosen "Bittersweet Symphony" but you also must make sure the slider in this audio well is not set to its lowest level which iDvd at times will default to. So simply drag the slider to the right half way or higher.
click here:
If you have already done both the above steps and you still have no audio, then it's very possible the audio file is corrupted. Try a different audio file to make sure.
Hope this helps but if not just come on back.
Message was edited by: SDMacuser

Youtube videos wont play after using Quicktime (which changed my preferenaces) how to fix?

I played a video in Quicktime on my pc (against my better judgement). Quicktime went through my FF & changed everything to be played in QT, now online videos, specificallt Youtube, wont play in my FF browser (3.6.14).
I get sound but no picture.
What do i change back to fix this?I have changed everything to either WMP or VLC to try & get it to play with no luck so i must be missing something?

I had this problem and searched it and came up with a solution that works for me.
First, I only started having this problem for the last few days, this came after a multitude of updates from Adobe and Windows.
The videos would only play (though the sound kept playing) if I kept moving the mouse cursor over the video.
My solution, I went into Tools \ Options \ Advanced \ Network ... and simply cleared the Cache Web Content. I might have also deselected Override Automatic Cache Management ... but regardless, this is the solution that is still working for me.
I should also add that when FireFox gets flaky that's where I always go and that seems to solve any strangeness. Just passing this on.
EDIT ---- Just now I experienced the same thing. I obviously did not fix this issue. Sorry for this unnecessary post.

Music wont play after updating iPhone 4 to iOS 6.

After upgrdaing my iphone 4 software: my music library wont play any songs. It just skips all of them until it reaches the end of the list. I't seems that subscribing to iTunes Match will solve this problem but i dont want to pay for it. Is there any other solution that dosnt involve subscribing?

I'm having the exact same problem! Only some of my songs are on there. Like it will show that the song is there but the content is not. It keeps skipping until it finds a song that actually downloaded. I've restored my phone twice since upgrading to ios6 and nothing helps. I hate this update and wish I never did it.

Itunes wont open after trying to install 11.1.4??

iTunes will not open after trying to install 11.1.4 version ??

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Song wont play after sync help plz

When i plugged my ipod in2 the computer to sync new song some of them wont play all the way threw is there any way to fix this

It may be corrupted. Delete it and redownload from itunes store
In iTunes Store click on the Purchased link under Quick Links on the right.
Navigate to the song you want and click on the Cloud button to download

Song wont play after buying from iTunes

I just bought a song from iTunes and it wont play at all when I try to play. What can I do?
-Marvin

It may be corrupted. Delete it and redownload from itunes store
In iTunes Store click on the Purchased link under Quick Links on the right.
Navigate to the song you want and click on the Cloud button to download

A30 audio wont play after XP pro install

Similar Messages

Maybe you are looking for