A305 - S6872 Laptop CD/DVD Rom does not show up on "My Computer"

How to I fix this problem. There's a "!" mark in the "Device Manager" for the cd/dvd rom drive.
"!" DR7164O OHV364L SCSI CdRom Device
"!" TSSTcorp CDDVDW TS-L633P
There's also a "!" on the networks adapters.
"!" Microsoft 6to4 Adapter
"!" Microsoft ISATAP Adapter #2 
How do I fix these problems because updating the drivers will not fix it and make it go away.
if you can help, that would be great.

Satellite A305-S6872
See this Toshiba document..
   CD / DVD drive missing from 'My Computer' (Windows Explorer)
-Jerry

Similar Messages

  • I installed acrobat 7.0 professional but an Icon does not show up on my computer desktop to enable me to log in to Acrobat....help me!!!!

    I installed acrobat 7.0 professional but an Icon does not show up on my computer desktop to enable me to log in to Acrobat....help me!!!!

    What OS? Modern OSs will not support Acrobat 7.

  • HT1384 My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?

    My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
    I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.

    Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
    Sounds like a repair issue, which is not easy to do in India :(

  • I downloaded 7.0 and it does not show up on my computer

    i downloaded 7.0 and it does not show up on my computer. How do I get the music files to show up?

    A movie rented on an iPhone can only be viewed on an iPhone. If you want to view on TV you need to rent directly on ATV or via computer (and stream using home-sharing)

  • I have an ipod touch.  Itunes recognizes it.  However, it does not show up in "My Computer".  Please let me know how to correct this.  Thanks.

    I have an ipod touch.  Itunes recognizes it.  However, it does not show up in "My Computer".  Please let me know how to correct this.  Thanks.

    Not sure that it will show up.
    Why do you want to see it in my computer?

  • HT4623 my phone does not show up in my computer after update

    my phone does not show up in my computer after update

    Hey there, i got the same Problem with my MacBook Pro (Mavericks 10.9.4) and two iPhone´s 5 with the iPad 2 and the iPad Air, (all with iOS 7.1.2) since 2months. SOLUTION???
    Since the change of Snow Leopard on Mavericks, the entire system of the MacBook is much slower. This is already noticeable at the beginning (start the MacBook Pro). It runs through the entire software. z.Bsp. Open Safari / Outlook, iTunes and more. for about 2months absolutely no back-up of my devices is possible!!
    Every time when you connect the hardware (iPhone 5 / iPad 2 / iPad Air) iTunes stops responding and needs to close above EXIT NOW!! No back-up's my hardware (see above) possible!!!
    but iPhoto is running with the devices and at least I can transfer the images.

  • How do I eject a dvd that does not show on the desktop

    How do I eject a dvd from the drive when it does not show on the desktop?  I tried restarting and the drive makes noise but does not eject the dvd.

    oldlarry wrote:
    How do I eject a dvd from the drive when it does not show on the desktop?  I tried restarting and the drive makes noise but does not eject the dvd.
    Hold down the mouse button while restarting. This should eject any disc in the drive.

  • DVD player does not show images

    Hi,
    This could have been added to a recent post, but it is somewhat different.
    When I insert one of my own DVDs, DVD player plays the music all right but no image...unless I request to open DVD media in the menu.
    Can someone help and tell me why is it not doing it automatically as it did with my previous OS version ? What should I do ?
    Thanks in advance
    Ivan

    Done....
    Did not change a thing !
    Furthermore when I open the media VIDEO TS from my DVD, it is loading but the controler does not allow me to do anything; just inactive; I just hear the music that is on the home page of the DVD
    Thanks in advance

  • Dvd drive does not show in Finder

    My DVD drives (internal and external) do not show in Finder.  Why?
    If I insert a disk, it will show, but not till then.
    I-Mac
    Model Name:
    iMac
      Model Identifier:
    iMac11,1
      Processor Name:
    Intel Core i5
      Processor Speed:
    2.66 GHz
      Number of Processors:
    1
      Total Number of Cores:
    4
      L2 Cache (per Core):
    256 KB
      L3 Cache:
    8 MB
      Memory:
    16 GB
    OS= Mt Lion

    I would like to burn to external as it is much faster and the internal is not liking me.
    So, if I pick a file in Finder and click Burn to DVD, it tries to burn to internal.

  • DVD Player does not show all subtitles available

    I am posting this in the OS X Tiger forum, because I could not find a forum dedicated to DVD Player.
    I am looking for a way to access "hidden" subtitle languages. I know that probably doesn't make sense. Here is what I mean:
    Most DVDs have a page that lets you select a subtitle language (English, Spanish, French). However, if I play a DVD on the Toshiba DVD player connected my TV and I press the "subtitle" button on the remote, a pop-up window appears on the screen that usually shows many more language options than are available on the subtitle page. (Japanese, Indonesian, Chinese, etc.)
    Is there a way to access these "hidden" subtitle languges with Apple's DVD player? (I have ver. 4.6.5)

    Hi, Clinto.
    I've not used that option, but it it exists then you would use the method described in the DVD Player Help topic "Showing subtitles in movies."
    In DVD Player, select Help > DVD Player Help. In the resulting Help Viewer window, type "showing subtitles" in the search field in the top border, press Return, then double-click the "Showing subtitles in movies" topic in the search results. Follow the instructions in that DVD Player Help document.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • My ipod shuffle does not show up on my computer

    My computer does not recognize my ipod shuffle 4th generation

    Hello dcollins1960,
    From what you are describing the iPod will not show up in iTunes when you connect it. I found an article that may help you with the iPod issue you described.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    1. Start with the iPod Troubleshooting Assistant
    If you haven't already done so, use the iPod Troubleshooting Assistant that applies to your iPod. This will often solve your issue.
    If you're still experiencing the issue after going through each of the steps in the assistant, continue with the steps below in this article. The most likely solutions are listed below (for both USB and FireWire (IEEE 1394) iPod connections). Check each section starting from the top of the list to see if that is what's keeping your iPod from appearing.
    Note: To determine if your iPod syncs via USB or FireWire, check the table in the Additional Information section below.
    Thank you for using Apple Support Communties.
    Regards,
    Sterling

  • MuVo does not show up in "My Comput

    I have an Emachines 2.92 ghz system with 024 ram running Windows XP and I <EM>do</EM> have Adminstrati've rights. I installed the software on my computer as instructed. When I rebooted and then attached the Muvo txfm to my usb port. The Muvo screen shows the moving USB icon as pictured in the instruction manual but it was NOT recognized in "My Computer".
    There was something under "Control Panel" called Muvo system folder I think and when I clicked that, it said there was no dri've connected and that I should connect the dri've to the USB port. But it already was connected. I tried another USB port but the system would not recognize it from there either. It is listed in Device manager under dri'ves and there is <EM>no</EM> question mark or exclaimation mark there or anywhere in Device Mgr. but when I select the dri've to go into "Properties" the computer freezes for about 20 seconds. Then properties opens up and it says "there is no problem with this device." A window came up in my taskbar saying there was a problem with hardware installation so the device may not work properly. I disconnected all usb devices and connected the Muvo again but it doesn't show up. Then I rebooted, attached the device again but still the same problem. Then I unistalled the software and attached the device to the USB port and a window came up saying the hardware was installed and the device was now ready for use but it still is not in "MY Computer" so I am unable to access the device to do anything with it. It <EM>is</EM> in Device Mgr as "disk dri've" now. Then I deleted the device from Device Mgr and rebooted. I installed the driver update called "MStorage_PCDRV_LB__07_00_250.exe" from your website and then plugged the Muvo into the USB port again and it showed up there as Muvo TXFM but still not in My Computer listing.
    I tried to install the Firmware update from your website called: "MuVoTXFM_PCFW_LF__9_0.exe" but because the Muvo doesn't show up in "MY computer" it is unable to find the device and it just hangs as it looks for the device.
    OK, now I'm thinking the Muvo is a defecti've player so I plugged it into my 998 Dell computer running Windows Me. with no software installation at all and it showed up in "My Computer" in a matter of seconds. I even put a song on it from the Dell computer. So wassup?
    Thanks for your help
    P.S. I also did these two registry fixes allowing permissions on both (but they were already set to that anyhow) so it did not fix it:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\U SB
    And also I downloaded and installed the three microsoft fixes I found on one of the many posts I read on this forum for media player and something else. I cant remember what, I am just so exhausted!

    Connect your player and find its entry in Device Manager. Click on Remove then disconnect player. Also select Show Hidden Devices and remove any extra entries for your player.
    Go to Control Panel, Add/Remove Programs and remove the MuVo drivers, Mediasource and Media Explorer software.
    Reboot PC and then re-connect player - it should be detected immediately by XP.
    Another thing it might be is if you are using a front-mounted USB port on your PC - these don't always supply enough current. They allow the player to be seen but not enough to actually do anything with it.
    If you choose View Devices by Connection in Device Manager with the player connected and drill down to find the entry for your player, you can look at the properties for the controller and hub that it is connected to. One of these shows the current equired and the current available.
    PB

  • IPod shuffle 4th generation is not charging, not recognized by my computer and laptop (Windows 7) and does not show up in iTunes

    I have done all the troubleshoots and reset functions but my iPod shuffle is still not working. Every time I plugged my iPod it only shows red light that lasts for about 3 seconds and will disappear after some time. I've been using the same computer and laptop back then, and it stopped working since the last week of October.

    Hello Erickson Gudelano,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Best of luck,
    Mario

  • My DVD player does not show up in finder

    , when i insert a disk it gets ejected again. can somebody help me?

    Try another disc. It's possible that it's scratched & won't read.
    DVD Player is found in your Applications folder.

  • New computer only syncs itunes music from ipod but i have other songs not purchased from itunes that does not show up in new computer

    i used to have 900+ songs stored on my HP laptop, which i can no longer use and bought new toshiba laptop. when i tried to synce 900 songs from iPOD to the toshiba it only gave me 330 songs and not the entire library stored on the iPOD. have tried sync from iCLOUD as well as importing & exporting songs as shown in the drop down menu from iTUNES, but unable to do the sync process successfully!? do i have to manually reload every song i have already burned to CD onto new toshiba? am i or did i already do something wrong to prevent what should have been an easy sync?? am retired and techno-challenged. really need clear to follow instructions. any help will be more than greatly appreciated...

    You can only sync with one computer/iTunes library. To make the new computer the syncing computer:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Maybe you are looking for

  • I need help getting my MacBook Pro to play a DVD.

    I have spent the past hour trying to figure out why my MacBook Pro, OS X 10.6.8, to play a DVD I have inserted into the drive. I have restarted the computer and verified that there is a DVD drive installed. I have been been able to play DVDs for a wh

  • How to convert Labview document into PDF format

    Hi! can any one tell me, can we convert the Labview document (Labview saved files)into PDF format. I wanted to convert it using a VI. If any one suggest me or send me the example vi i will be very thankful. Regards Ramesh.C

  • [SQL startup] .......... ORA-01031: insufficient privileges

    Hi All I have connected with my Oracle 10g database as username:system. When I try to startup oracle instances using 'startup' command at SQL>startup it gives an error message that I dont have sufficient privileges. Can any one tell me how can I give

  • Mac Book Discoloration Replacement Outside USA

    Calling all international Mac users! I have researched what seems thousands of discussions on the Mac Book's discoloration, specifically the white MB. I have had my white MB for around 2 months and it is just beginning to show the yellow discoloratio

  • Message Class Error.

    Hi All, I am having an error in Message class 00. The message number is 058. The issue is I want to convert this error message to the warning message... Is there any solution for this?