A305-s6905 cd drive not working---DVD works fine though

My computer has a cd/dvd drive that works for dvd use but not for cd.
All looks ok in device manager. DVD ROM shows up in My Computer.
Any suggestions?
Thanks.

That indicates that the drive itself is malfunctioning.  Sometimes they can be cleaned, but normally need to be replaced.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Similar Messages

  • Dvd drive not worked properly

     i have  hp pavilion dv4 series.my dvd drive not worked properly.for that purpose only i went 7 times in your service centre but they won't take action  till now .why u people do like this .i want explation and just change my  dvd drive that's all.

    tcrite,
    Sounds like a bad drive...I would get a replacement. According to Accelerate Your Mac database, it should work without issue.
    Just enter the model number of the drive and select your Powerbook G3 2000, and you will see four reports on this model.
    http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

  • MacBook Pro Late 2011 : Optical Disk Drive not working?

    MacBook Pro Late 2011 : Optical Disk Drive not working?
    When i try to a put in a cd or dvd; it rejects it automatically within 10-15 seconds.
    I have resetted SMC and PRAM; no chages.
    Don't know what to do. Please help.
    Thank you.

    Clean the heads.
    check to see if it is under warranty.
    buy external DVD/CD rw

  • HT2801 USB Super drive not working

    I have removed the optical drive from my 2008 (late) macbook and added an SSD to run along side the HDD and increased the RAM. I have a super drive to read CD/DVD's  but i can not get this to operate?

    I believe that the Apple USB Super Drive only works with late model Macs that didn't come with an optical drive. Third party usb drives will work ok though.

  • Audio driver not working in hp 2000 - 2116tu laptop

    Audio driver not working in hp 2000 - 2116tu laptop
    Driver installed : sp57716.exe
    From : http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-106718-1&cc=us&dlc=en&lc=en...
    OS : Windows 7 Pro x64
    Exact Problem : Audio stops working now, and then, intially reinstalling audio driver helped, but now, that trick is also not working!! I'm nither on mute, nor on low volume level!!
    Laptop is brand new : And i'm using it from last 2 days only, so was installing everything for the first time.

    Hi architsomani,
    Take a look at this document and let me know if the troubleshooting steps help to resolve your issue.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Amber update but map and bere drive not work

    After amber update my here map and here drive not work just open the app but not open and close automatically

    Same thing here. I have tried all things and have a similar issue
    http://discussions.nokia.com/t5/HERE-Location-base​d-services/Settings-gt-Applications-does-not-have-​...
    NOKIA NEED HELP HERE !!

  • HP deskjet D2300 series driver not working in windows 7

    This procedure is much too complicated for an average user. You know that millions of Wondow XP users are switching to Windows 7. I' sure that most of them are facing similar problems. HP should come with a user friendly solution that solves the above issues. Don't you think?
    My problem remains unsolved.

    Hi dvh,
    Welcome to the HP Forums!
    I see that your HP Deskjet D2300 series driver not working in windows 7.
    Do you see any error messages with the installer? Or does it just close out and doesn't install?
    In the meantime, please try using our HP Printer Install Wizard for Windows.
    Hope to hear back from you, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Disk Drive not working and could not inter Hkey_Local_Machine

    I tried following the directions from http://h30434.www3.hp.com/t5/Hardware/HP-Pavilion-dv6000-Windows-XP-Disc-Drive-not-working-Internet/... but when i go in to Hkey_Local_Machine all that is there is a file named "(Default)" and i cannot work with it. how can i get my disk drive running?

    I tried following the directions from http://h30434.www3.hp.com/t5/Hardware/HP-Pavilion-dv6000-Windows-XP-Disc-Drive-not-working-Internet/... but when i go in to Hkey_Local_Machine all that is there is a file named "(Default)" and i cannot work with it. how can i get my disk drive running?

  • Probook g1 450 4th generation Intel Graphics Driver Not working

    After Updating Baios my laptop , graphics driver not working . install successfully but when    click the graphics driver icon , it's show the  massage ,GfxUiEx has stopped working .
    i am worried about it . what can i do ??
    i uninastalled driver then again install but this massage show again ,,,i use windows 8.1.
    massage is :

    @Ariful11 
    Thank you for using HP support forum. I have sent you a private message. If you’re unsure how to check your private messages please click here.
    Thank you,
    Omar
    I Work for HP

  • Icloud drive not working on ipad 3

    iCloud drive not working on iPad 3. works fine on my MacBook Pro and iPhone 6. Utterly useless on iPad 3.

    Hi there Chris Howlett,
    Depending on the issues you are experiencing, you may find the articles below helpful. 
    Get help using iCloud Drive
    iCloud Drive FAQ
    -Griff W. 

  • Window 10 upgrade. Graphics driver not working even after re-install

    Notebook pavilion DV6 3280.  Just upgraded to Windows 10 and AMD graphics driver not working even after re-install.  What do I do?  Is there another driver not on the HP Website that I should try?

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no error

    My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no errors.
    I tried to reinstall driver.
    I downloaded new codec
    I tried Microsoft FIX IT
     Nothing worked.
    Need some help.
    Thank you!!
    Paul

    Hi Albos, This is a known problem. These superdrives die after a while. See the various threads on this site and the internet. I have the same problem with my Imac 20" 2.16 ghz. Just wants to burn and read cd's. Its has to do with the laser. For DVD an CD are two different laser and the one for DVD's has probably died in yours (as it did in mine). I bought an external LG burner and problem solved. (And a lot cheaper than replacing the superdrive)
    Hope this helps you.
    Robert

  • After upgrading to Lion Image Capture does not work, even though it is intel software.  Gives error 9931.  What gives?

    After upgrading to Lion, Image Capture does not work, even though it is intel software.  Gives error 9931.  What gives?

    Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
    Didn't used to be this way before Lion/10.7.
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • 5233 cell not working fine after new theme install...

    My 5233 cell is not working fine after new theme installation.
    As soon as i installed new theme  MENU options are not coming, Only showing new theme image.
    Pls help.

    Be careful when you install themes or apps. Make sure their sources are reliable and the app works properly on your phone model.
    If you want to thank someone, just click on the blue star at the bottom of their post

  • Smartform : line type not working fine when used on Next page

    Hi ,
    Please help on below :
    I have a smartform and have line type which is used in printing the items.
    When I use this line type on very first page , it works fine.
    But for the next page which is the exact copy of first page ,
    the line type does not work fine with printing first line item on next page,
    it refreshed the work area which i am printing. so on the next page very first element gets all the values 000
    But on the next iteration it works fine and does not refresh work area.
    Please see why is such abnormal behavior happening.
    Regards,
    Uma Dave

    Hi Ameya
    there might be syntax error. Try to get what exaclty is an error using following code.
    CALL FUNCTION <smartform>
        EXCEPTIONS
        IF SY-SUBRC  0.
           CALL FUNCTION 'SSF_READ_ERRORS'
                IMPORTING
                     ERRORTAB = IT_ERRORLIST.
         ENDIF.
    In IT_ERRORLIST you will get error message.
    Regards
    Sachin G Patil

Maybe you are looking for