A30p W2K Reinstall w/driver problems

I had a HDD failure in an IBM A30p last week. Successfully replaced the HDD with a refurb. Used IBM Recovery CDs to reinstall W2K Pro. The install appears to load properly but when I reboot the machine, 4 "new hardware" devices are found - 2 are unknown and 2 are PCI cards. When I attempt to find/install drivers for the PCI devices, no suitable drivers are found. Similarly, with the 2 unknown hardware devices, I don't know what to look for.
Additionally, when I try to load the ethernet drivers, it doesn't like them either so I can't restore my network connection.
Any suggestions, similar problems or solutions?
Thanks, in advance, for any help.

That is somewhat weird...here's what I'd try:
a) Download the ACPI power management and SpeedStep first:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4gxpeg
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4ZDPPT
b) Try both network drivers (you do know that all of these must be unpacked from the Win subfolder after the install, correct?)
Hopefully this will resolve at least some issues, and then we'll take it from there...
Good luck and keep us posted.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

Tecra 9000 running W2k - Audio controller driver problem !

Please Help!
I have a Toshiba Tecra 9000 notebook and recently discovered the sound was no longer working. I am unsure as to exactly when it first stopped working but believe it was either with MS Windows 2000 Updates or when cleaning up PC after Spyware attack. Upon checking the actual device (Yamaha AC-XG Audio Device) it has the every so helpful " ! " with a 'Code 10 - the device cannot start', within the 'Device Status' screen.
I have removed device and allowed windows to detect & install, no success, then downloaded and tried many device drivers and generic drivers, and
even the latest as suggested on a Toshiba support website I located
http://eu.computers.toshiba-europe.com that being;
Driver Date: 22/05/2001 Version: 5.12.1.2138
I am at a complete loss as to why it stopped working and what to try next to try and resolve the problem. Any
assistance or advice would be greatly appreciated.
Regards
K

Hi
It is possible that after installation of some MS Updates that the audio driver is blocked from loading to your system and no sound can be heard.
If you want you can try to install this driver:
http://drivers.soft32.com/driver/download-Yamaha_AC_XG_Generic_Drivers_for_YMF753_743_752-24609.html
It helps after installation of SP2. I am not sure if it will help in your case but you can try it.
Bye

T420s wireless driver problem - after restore/reinstall

i have a 420s that works fine.
but something went strange with the wireless after one of the updates, not sure if it was windows or lenovo update.
in any event, i tried reinstalling the driver, and it stayed broke. so i rolled back the computer to a week or so earlier.
this fixed the wireless, but broke a few other applications not lenovo related.
after manual updates on those programs everything works again.
so fast forward to today. i did the lenovo update, and it decided that it needed to update the intel wirless driver package, since it was never installed. **bleep**? but i figured how bad could it be, AFTER i set a new restore point, so the only thing that would get restored was the wireless if it went strange on me.
after the update, wireless broke again. not entirely sure what was wrong, but it just didnt work right and wouldnt connect or see some known access points.
question; what is the proper method to completely deinstall/reinstall the wireless drivers and 'access connections' on this computer so that everything works properly?
thanks for any insight
mark

hey markgca,
try uninstalling the wireless driver. let windows install its own generic drivers.
test again with the generic drivers.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem

My XP machine crashed, I reinstalled Premiere Pro 2.0 with Windows 7, and I got the following error: 'The Currently installed soundcard driver does not support Direct Sound Input. Recording audio is not possible.' The soundcard drivers are updated. Any ideas? Here's what I have: AMD Phenom II X4 965 Processor 3.40 GHz 8 GB, 64 bit. Thank you for looking.

Thanks! Though I upgraded to solve the problem, this is good to know.
Bob
Date: Wed, 9 Nov 2011 04:45:42 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem
Re: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem created by Steve-Italy in Premiere Pro CS4 & Earlier - View the full discussion
VERY VERY VERY EASY (now, when I solved the problem, not before...!!!)
Insert Micropone or any jack in Micropone Input or Aux Input, on your sound card or motherboard !
AND NOW YOU CAN USE PREMIERE PRO 2.0
Enjoy
Steve - Italy
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015730#4015730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015730#4015730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Nokia N8 installing driver problem !! HELP ME !!!!

Hi guys, i recently bought a Nokia N8.
i've install Nokia Ovi Suit from folder that exist in my phone, it's completely install ovi suit and download Nokia N8's USB driver from internet and stores it in "C:\Program Files\Nokia\Connectivity Cable Driver".
when i connect the phone in Nokia Ovi Suit Mode via USB, windows can found it, but cannot install its drivers !!!
Windows says that: "Windows found driver software for your device but encountered an error while attempting to install it.
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it." (i use Windows Vista 32-bit, see below attachment)
what can i do ??!!! plzzzzz help me i need too run Ovi Suit !!!
Attachments:
Nokia N8 USB Driver Problem.jpg ‏138 KB

I am having the exact same issue.
The Ovi store was installed first via the N8 built in software, then uninstalled and reinstalled using the latest Ovi version from Nokia's webinstaller download, but still no success with the Ovi connection.
The other file transfer modes work fine 'media transfer & 'mass storage' but the Ovi store is still unable to run due to Windows VISTA not being able to locate the drivers for the N8 software. (despite being installed!)
After accepting the prompt for Windows to locate the drivers... The same error as RayMond_021 screen shot appears.
"COMPUTER SAYS.... NO!"
Super frustrating! A brand new $800 phone and I can't even access the promised software (Ovi maps) that encouraged me to buy it!?
PLEASE HELP US!!!!!

Fresco Logic xHC1 (USB3) Root Hub driver problem Code 31

I have the Ideapad S206 Windows 7 32 bit and have a driver problem which I believe is due to a Windows update at sometime. I get the following statement :-
"The device is not working properly because Windows cannot load drivers for this device (Code 31)"
Can someone very kindly please advise me how to sort this out. Apparently uninstalling the driver and then reinstalling does not work.
Jezza

Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
Please try updating the following to verify the issue is fixed
Fresco USB 3.0 Driver Win7 USB3.0 Driver (Fresco) Win8
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Reinstall Display Driver to enable 3D

Currently using Photoshop CS6 Extended on Windows XP. When I go to enable UGP in Preferences the message I get is "photoshop detected an error in your display driver. Update or reinstall the driver and check UGP to retry". Have reinstalled Photoshop but the problem is still there. Photoshop Extended is compatiable with Windows XP so why can't I enable the display driver?

CS6 does not support GPU on XP systems.
Samuel Lee says:
Hi Jeffery, will Photoshop work on Windows XP 64bit Professional? (I remember the latest service pack for that was SP2, instead of the 32bits with SP3.)
October 20, 2012 8:19 PM | Reply
Jeffrey Tranberry says:
You can install and run on XP 64 but it’s not a supported configuration. 3D is disabled for all flavors of XP.

Hp dvd-ram uj8b1 has a driver problem

HP Pavilion dv6 Notebook PC
Windows 7 home premium
We were able to play Cds and Dvds, and now they are not playing. I did download i-tunes recently, but don't recall if the problem emerged immediately after that. We don't use discs very often. When I ran the troubleshooting softward it said:
hp dvd-ram uj8b1 has a driver problem
Reinstall device driver Completed
The drive is experiencing a Plug and Play device issueThe drive is experiencing a Plug and Play device issue
Windows has detected a device status error with this drive and will keep checking for problems. Detected
What should I do now? How can I get this working again?
Thank you

Hello vijenthira,
What is your product number and operating system?
Thank you,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

CS3 Leopard Epson R1800 driver problems solved (hopefully)

Trying to put this post in searchable terms for others having the same problem finding the answer -- new to mac.
Everybody knows that you need to go to epson.com and download the new mac leopard drivers for most of the printers, including R1800. But the new driver won't install correctly unless you go into Library/Printers/ and move the entire "EPSON" folder into the trash can before double clicking the VISE install icon on the downloaded package. (Maybe there is another way to make it work, but mine wouldn't actually install and start working till I did this.)
If you have the right driver, you will see "EPSON SP R1800 (1)" as your driver in System Preferences/Print&Fax. Also, you will see "Print Settings", "Roll Paper Option", "Expansion" and "Extension Settings" as options in the pulldown menu in the epson print dialog through PS CS3 (after hitting print in the first print dialog box). There is also a "basic" and "Advanced" choice under Print Settings.
If you still have the wrong driver, you won't get any errors, but the new dialog box won't show up. The old driver that doesn't work shows up (I think I remember correctly) as EPSON SPR 1800 in your System Preferences window. No parenthetical. Also, if you have the old bad driver, in the epson print dialog box, you see a different set of options, and no 'basic' and 'advanced' choice under print settings.
I hope that helps some people. I was having a hard time knowing if I had the new driver actually working (even though I thought I installed it). Turns out I didn't! Thanks to random post by John McWilliams and Duane Ellison (who posted screenshot of new dialog in the LR forum), I figured out the thing with the Epson folder. Now let's just hope the prints look good!

Hi Laura.
Isn't that the most frustrating thing in the world? Anyway, that isn't the right driver. That is the one that ships with Leopard (or something, I don't know - anyway, wrong one).
Try deleting the EPSON folder again, deleting your printer from system prefs/print fax, reinstalling the driver and re-finding your printer. Now that I think about it, I did that, and generally fiddled around in there a bit, before it worked.
I don't know how Macs associate printers with drivers (I'm a PC person and missing my PC!), but once the software in the dmg package was properly installed, the printer automatically picked up the EPSON SP R1800 (1) driver when I told it to go look for printers. I didn't have to choose it from the list of drivers.
Hope that helps.
Susan

Nokia Connectivity Cable driver problem (Nokia 311...

I have an unlocked Nokia 3110 Classic with 2 GB MicroSD Nokia MU-37 memory card. On my PC operating system is Windows XP Service Pack 3. For connection with PC I use an original Nokia DKE-2 USB 2.0 data cable. My problem is when I install any version (from 6.5 to the latest 7.0) of Nokia PC Suite with Nokia Connectivity Cable driver or separatly this driver first and then Nokia PC Suite I got a problem under Device Manager with two devices that have yellow exclamation (saying: The drivers for this device are not installed.(Code 28).To reinstall the drivers for this device, click Reinstall Driver). They are under Modems: Nokia 3110 Classic USB modem, and under Ports (COM & LPT): Unknown device. This unknown device and also Nokia 3110 Classic USB modem (with yellow !) is present when I connect my phone and PC with USB cable and when I choose Standard Nokia mode. I tried to solve this problem on many ways (unsuccesful) following NOKIA instalation instructions and troubleshooter. When I try to install (or reinstall) a driver for this two problematic devices with Hardware Update Wizard choosing Windows Update or any other way (automatic - recommended or another) at the end I got this message: 1. Windows can't install modem with two answers: YES or NO, if I click YES, there is a new message: A service installation section in this INF is invalid. If I click NO at the first message the window of Hardware Update Wizard is just closed with no other messages !
So please if anyone here knows (or had this problem before and solve it) how to solve this problem, help me, because I am desperate.
I'll be grateful for any help !
Message Edited by ratnik_pakla on 29-Sep-2008 11:17 PM
Message Edited by ratnik_pakla on 29-Sep-2008 11:23 PM

In this attachments are pictures (screenshots) of my problems (in .bmp format): screenshot of Device Manager on my PC, Unknown device in Device Manager,Nokia 3110 Classic USB Modem in Device Manager and Windows XP Professional SP3.
You'll see that I use on my Windows XP Professional Service Pack 3 some Vista themes. So, don't think that this is some "fake Service Pack 3", this is the real Microsoft Windows XP Service Pack 3 (last and official, not release candidate) downloaded from Microsoft Web site, but I use some Vista Customization Desktop Tools or something like that, I don't know exactly the name of this program, but that program install Vista themes that I like.
P.S. This attachments are pictures in .bmp format but I added a .txt extension because this forum only except files with .log, .txt, .bat, and .xml extensions, so if you are going to save and open it on your PC please remove .txt extension. If not, just click on it.
Message Edited by ratnik_pakla on 30-Sep-2008 03:10 AM
Message Edited by ratnik_pakla on 30-Sep-2008 03:13 AM
Attachments:
USB modem.bmp.txt ‏538 KB
Unknown device.bmp.txt ‏538 KB
Device Manager.bmp.txt ‏846 KB
sp3.bmp.txt ‏108 KB

M-Audio Delta 1010LT driver problems with 10.4.6

I'm having problems with the M-Audio drivers for my Delta 1010LT sound card under 10.4.6. Specifically, I'm getting frequent kernel panics if I try to play sound through the card when I boot up in the morning after the computer has been shut down during the night. I've tried using not only the current version of the Delta driver (2.0.5), but also 2.0.4, 2.0.3, and 2.0.1.
Recently, after being very frustrated with this problem, I requested and received a replacement card from the vendor, since both I and M-Audio Tech Support suspected that I might have a defective card. I have to admit that there seems to be some progress. At least for the time being, I have a working setup for Pro Tools M-Powered 7.1 with driver version 2.0.5 and Mac OS 10.4.6. However, I'm finding that I'm still experiencing frequent kernel panics if I try to play sound through the card (any sound application causes a problem, not just PTMP) when I boot up my computer in the morning. (BTW, I probably wouldn't have this problem if the driver would allow my computer to sleep! But that's another story . . .)
I do have a workaround (at least, it seems to be a workaround, though my past experience leads me to believe that it could cease to be one at any moment): immediately upon starting up, I reinstall the driver. Then everything seems to be OK—unless the system freezes (which it does frequently, and which it didn't before I installed the 1010LT), in which case more often than not I get a kernel panic upon rebooting and have to install the driver again.
Since when it does work, it works very well, I don't think that the problem is with my machine. (I've tried switching slots several times, which does not seem to have an effect.) But something is still clearly not right.
BTW, through a process of trial and error, I've determined that there seems to be a conflict, at least on my system, between the M-Audio Delta drivers (all versions) and Intego VirusBarrier X 4 (and, I think, also ClamXav). I assume, though I can't support the assumption, that they may conflict with other anti-virus software as well. With Mac OS X viruses beginning to appear, this is a serious problem that I think should be addressed very soon!
I'd be interested to hear if other users with Delta 1010LT cards have had similar problems under 10.4.6. I've seen a large number of such items involving 10.4.3 and 10.4.4, but there appear to be few reports of such difficulties with 10.4.6.
MDD dual 1.25 GHz Power Mac Mac OS X (10.4.6)

I finally gave up and ordered a Firewire 410, which works beautifully. Too bad that I wasted $200 on a card that I couldn't use, but . . .

Equium A60-155 display driver problem

I have a problem with my laptop when I use a USB hard dive or run a CD/DVD my display driver crashes
The display driver is the latest version (ati mobility radeon 7000 igp - 6.14.10.6430
any ideas

I had the same problem with my Equium A60-155.Over a period of months the situation got worse and the display driver was crashing every few hours. I tried updates and unistalling and reinstalling the driver without effect. After reading this form I downloaded a BIOS update (1.9b) and one week on the driver has not failed.

MBP Hard Drive Problem (Again)

My MBP is going back to the Geniuses for a HD problem for the 3rd time tomorrow, since I bought it in July. I am confused about exactly what is happening, and I would like any advice anyone might have about salvaging any of my data.
(The first two times, I brought it in because the HD died. The first time, they told me they had replaced the HD, though they hadn't. They ran diagnostics, decided it did not need to be replaced after erasing my data, and then gave it back to me. I brought it back the next day [t died that night as I was reinstalling] and they replaced the HD in about a day.)
Everything got really slow this weekend and I had "index" and "database" problems in my mail.app (twice), and my iTunes (twice). Now, the replacement HD has disappeared when I tried to reinstall the system software/repair the disk in disk utility.
This is the chronology:
I have had this hard drive for 3 weeks, installed at the local apple store to replace my factory-installed dead hard drive.
On Friday, my mail app stopped working. After diagnosing the error message (thanks to this forum), I learned that the index file was corrupted, so I reinstalled the index.
On Saturday, my iTunes said it couldn't read my iPod, so I restored my iPod, erasing all of my data (music, calendars, contacts, important documents). I continued to get the same error message.
Today, I restored it again, but I still couldn't get iTunes to write more than 2 gb of information (of the 20 gb of data). At that point, I decided I would have to send my iPod in for repairs and stopped trying.
8 hours later, I got an error message that said the iTunes index was corrupted. I started to put the music back in to iTunes, but the MBP kept kept freezing.
I restarted the machine and received the blinking questionmark. I put in my system installation disks to run disk utility and, if need be, reinstall my system software.
This is where it gets interesting:
Disk Utility can see the topline Disk Description and the SMART status is verified. But the name of the disk itself is wrong and the mount point says it is unmounted. The capacity is correct, but under everything from owners enabled to number of files and space available, there is just a dash.
Unlike my previous hard drive problem, there is no clunking, and the hard drive appears to be working. Disk Utility found the following: Invalid B-tree node size. The volume needs to be repaired. Error: The underlying task reported failure on exit. 1 HFS volume checked: volume needs repair. And that's it.
My questions are:
1. What is happening to my hard drive?
2. Is it dead or is there any way to fix it?
3. Is there any way to salvage my data? (Because of my iPod failure, I lost my calendars, contacts, important data from my last big back up 3 weeks ago, not to mention my carefully curated music collection. I have my documents backed up to gmail, but not my notes, which were on my iPod.)
4. Does it sound like an internal hardware problem or is it really just two bum hard drives (from two different manufacturers) in a row?
MacBook Pro 2.16 ghz Intel Core Duo Mac OS X (10.4.8)

In case anyone receives a series of index problems which escalate into apparent hard drive failure and blinking question mark of doom . . .
the Geniuses fixed the computer by doing a complete wipe of my hard drive.
They said that the directory error may have existed from before my last hard drive was installed, but I am not certain how such a thing could exist.
Because it was a directory error, I lost all of my data on the hard drive, but I was able to take the machine home with me within an hour. Since the erase and reinstallation, my computer is running much, much faster, and seemingly cooler, but that may just be my relief at having a working machine back.

Repeatedly required to reinstall printer driver

I have installed canon MP 450 in my ibook G4 and have successfully printed material using bluetooth. However, I often have to reinstall the driver. Does anyone know why this would happen repeatedly?

Yes, I can connect by USB. This is a confusing problem since it is intermittent, and I can even be right next to the printer.

Installing a driver problem

I'm trying to install the driver for my Zoom r-24 (recording software). I click the driver and the installer opens up, I select the Mac HD as the disk and it goes to instalation type window where it says 'Click install to install a standard installation of this software on the disk' but the install button is faded and it won't let me click it, only go back. What's wrong? Thanks in advance

Hi,
Please also check Event Viewer if it identify this problem.
In addition, also check Device Manager, if similar driver already installed, try to uninstall them and reinstall new driver again for test.
Roger Lu
TechNet Community Support

A30p W2K Reinstall w/driver problems

Similar Messages

Maybe you are looking for