A4H and HDB systems not starting in SAP MMC for BW on HANA trial

Hi,
I followed all the steps to create an account in AWS and activate a trial version of SAP BW 7.4 on HANA and SAP BO 4.1. The instance activated correctly in the SAP CAL with a green status. The instance was created in the region us-east-1c. I am currently in Australia.
But when I logon with the remote desktop, and go to the SAP MMC, I see that the A4H and HDB systems have not started and are not green. When I try to start them manually I get the error below. Please help. My SDN userid is P052405.

Hi All,
The error was fixed after I rebooted the instance in the SAP CAL.

Similar Messages

  • I am using laptop hitting and slow system not working

    i am using laptop hitting and slow system not working and very late opan file browser every think . plez help me

    Hi,
    Shut down the notebook.  Tap away at the esc key as you start the notebook to enter the Start-up Menu.  Select the Bios option ( usually f10 ) and under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory.  Post back with the details of any error messages.
    Note:  If the option to run these tests is not available in the Bios Menu, use the f2 diagnostic menu instead.
    Can you also post back with the following details.
    1.  The full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
    2.  The full version of the operating system you are using ( ie Windows 7 64bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Can not update tiger and safari does not start

    Hi everybody,
    I have actually two but probably interrelated problems: First, safari does not start and second, I can not update tiger.
    It all started a few days ago on my MacBook (Intel). Somehow, Safari produced an error (I only guess that it was Safari because I was downloading a movie clip) and Tiger was frozen. After rebooting, the whole system had problems (e.g., Safari and Skype were not starting). I tried to reinstall and archive mac os x but with no success. The problems were growing actually even worse (e.g., slow) and at some point in time, Tiger was not even starting. Thus, I did a full new installation of 10.4.8 (delete and install). Afterwards, it worked first but after the automatic software update, the system told me that their was an input/output error (???) during the 10.4.10 update. Afterwards, the whole system had again problems (slow and problems with even booting)!! Thus, the software update made it even worse. So, I did again a full installation (delete and install).
    I have to update my 10.4.8 system, because I also have iLife08 that needs at least 10.4.9. However, I don't know what to do to avoid again these update problems??
    In addition, despite the full installation, Safari is not starting. Thus, there is still some problems but I have now clue where this comes from as it is newly installed?!
    Any ideas?? Thanks...
    Crobus

    Crobus, welcome, since you are starting from scratch with each re-install why not try Kappy's Extended Hard Drive Preparation.
    http://discussions.apple.com/thread.jspa?messageID=5203987&#5203987
    Do all steps from 1 thru 6, it is by far a more maintenance oriented than an Erase and Install. After the preparation, install OS 10 from your DVD, then download the OS 10.4.10 Combo Updater.
    Joe

  • MSExchangeSA and IS is not starting automatic at reboot after upgrading the server from SP1 to SP2

    I am running a 2 node DAG with separate Hub & CAS servers
    I have already upgraded the Hub CAS server and they are fine
    Exchange running on Windows 2008 R2 SP1
    All are in VM-Ware ESXi 5.0
    After I upgrade the mailbox server to SP2 the SA and IS service not starting automatic after reboot
    If I run "net time /set" command and then restart ADtopology server, the IS and SA starts fine
    But again after reboot they do not start
    Also I get the below event in the app log when the IS & SA fails to start
    Log Name:      Application
    Source:        MSExchangeIS
    Date:          05/22/2012 5:15:03 AM
    Event ID:      5003
    Task Category: General
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      server.domain.com
    Description:
    Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either on the client or on the server, and may require a restart of that computer. Verify that your domain is correctly
    configured and  is currently online.
    If I check the Registry for time resource it is taking from the DC
    I manually compared the time between DC and Exchange and it is fine
    Since the Exchange mailbox is virtual, I checked the time sync on VM-Ware tools and it is "unchecked"
    Checked for group policy and do not find any specific to time sync.
    Confirmed that Windows Time service is running
    Suspecting a Operating system issue, tried to upgrade the other DAG
    Even that node is displaying the same symptom and Issues
    Tried to install RU1 on both nodes and that too did not fix the issue.
    Checked with VM-Ware engineer and he said that every thing from VM-Ware end is fine
    Is Anyone have come across the issue before ?

    Exchange 2010: Unable to initialize the Information Store
    Problem: 
    Unable to initialize the Information Store service because  the clocks on the client and server are skewed.   This may be caused by a time change either in the client or the server,  and may require a reboot of that computer.   Verify that
    your domain is properly configured and  is currently online.
    Solution: 
    Open a cmd prompt from the Exchange Server as administrator (right mouse click on the command prompt shortcut and select “Run as Administrator”)
    Run this command
    Net time \\ADServerName /Set
    Restart the Microsoft Exchange Active Directory Topology Service
    *Important!! You have to restart the Microsoft Exchange Active Directory Topology Service or this fix will not work..  I tried just starting the Information Store service after running the command it it still failed..
    This worked for me and all is well on my exchange server.
    - See more at: http://www.mountainvistatech.com/2012/06/04/exchange-2010-unable-to-initialize-the-information-store/#sthash.SwQpgQEM.dpuf

  • Change and transport system not configured

    hi
    Please anybody help me on this. I installed SAP IDES4.7 on Win Xp with Oracle9.2. It is working good except one error. when i click on anymenu item in GUI a popup says " change and transport system not configured'.
    How to fix this?
    i appreciate your help in advance. Thanks
    Madhu

    Hi
    After installing SAP IDES4.7 u have to do post-installation.As a postinstallation u have to configure the STMS(sap transport management system)
    STMS is mainlly used for moving objects from one system to other system
    Regards
    kiran kumar.v

  • SRM AS JAVA not starting(JControl.EXE and Server0 are not starting )

    Hi All,
    We have SAP SRM 7.0 AS ABAP and AS JAVA with SAP PI and MDM installed on Windows Server 2008 R2.
    When we are trying to start SRM as JAVA  from SAPMMC is not starting.
    The JControl.EXE and Server0 are not starting.
    For your convenience I am pasting error part of trace files
    Our dev_jcontrol log file text is as follows:
    [Thr 7112] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
    [Thr 7112] [Node: bootstrap] java home is set by profile parameter
    [Thr 7112]      Java Home: C:\j2sdk1.4.2_19-x64
    [Thr 7112] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\SRJ\JC22\exe\jvmx.jar
    [Thr 7112] JControlICheckProcessList: process server0 started (PID:4688)
    [Thr 7112] Thu Dec 15 16:43:42 2011
    [Thr 7112] JControlICheckProcessList: process server0 (pid:4688) died (RUN-FLAG)
    [Thr 7112] JControlIResetProcess: reset process server0
    [Thr 7112] JControlIResetProcess: [server0] not running -> increase error count (4)
    [Thr 7112] JControlICheckProcessList: running flight recorder:
    [Thr 7112]      C:\j2sdk1.4.2_19-x64\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID228052750 1323947582 -bz E:\usr\sap\SRJ\SYS\global
    [Thr 5568] Thu Dec 15 17:23:18 2011
    [Thr 5568] JControlSigInt: signal = 2
    [Thr 5568] JControlIStopInstance: shutting down (command: 0)
    [Thr 5568] JControlIProcessSoftKill: soft kill of process dispatcher (pid:7648)
    [Thr 5568] ERROR => invalid connect to named pipe (rc = 232) [jstartnt.c   268]
    [Thr 5568]  ERROR => Can't send soft kill (rc=-1) [jcntrxxi.c   1743]
    [Thr 5568] JControlIProcessSoftKill: soft kill of process SDM (pid:7664)
    [Thr 5568] ERROR => invalid connect to named pipe (rc = 232) [jstartnt.c   268]
    [Thr 5568]  ERROR => Can't send soft kill (rc=-1) [jcntrxxi.c   1743]
    Our dev_bootstrap log is:
    [Thr 7712] CCMS: AlMsUpload called by wp 1004.
    [Thr 7712] CCMS: AlMsUpload successful for E:\usr\sap\SRJ\JC22\log\ALMTTREE.DAT (302 MTEs).
    [Thr 7712] CCMS: CCMS Monitoring Initialization finished, rc=0.
    [Thr 7712] [Node: bootstrap] java home is set by profile parameter
    [Thr 7712]      Java Home: C:\j2sdk1.4.2_19-x64
    [Thr 7712] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\SRJ\JC22\exe\jvmx.jar
    In dev_server0 the log is as follows:
    ERROR => The Java VM terminated with a non-zero exit code.
    What should be the issue I am not getting. Please help me to solve this.
    Thanks & Regards,
    Ishan

    Hi All,
    I removed last changes i did. n restarted it.
    Thanks,
    Ishan

  • Dispacher and server0 is not started during NW2004s installation

    Hi,
    Dispacher and server0 is not started during NW2004s installation. SAPInst is stopped on the step of the 'Start java instance'. SDM is 'running' but dispacher and server0 is 'Starting framwork'. So I configured the some parameters via configtool but I can't solve this probelm. I found the some error logs as the followings.
    (22503) Starting local Command:
    Command:  en.sapMPP_SCS33 pf=/usr/sap/MPP/SYS/profile/MPP_SCS33_spdeai01
    listen failed on port/service sapdp33
    initialize_global: another instance of the enque server seems to be running. EXIT
    ***LOG Q01=> MsSInit, MSStart (Msg Server 1 22502) [msxxserv_mt. 1818]
    [Thr  1] SigISetDefaultAction : default handling for signal 18
    [Thr  1] load acl file = /usr/sap/MPP/SYS/global/ms_acl_info
    [Thr  1] MsGetOwnIpAddr: my host addresses are :
    [Thr  1]   1 : [10.223.50.15] spdeai01 (HOSTNAME)
    [Thr  1]   2 : [127.0.0.1] localhost (LOCALHOST)
    [Thr  1]   3 : [10.223.50.215] 10.223.50.215 (NILIST)
    [Thr  1]   4 : [10.223.50.115] 10.223.50.115 (NILIST)
    [Thr  1] MsHttpInit: full qualified hostname = spdeai01
    [Thr  1] HTTP logging is switch off
    [Thr  1] set HTTP state to LISTEN
    [Thr  1] ms/icf_info_server : deleted
    [Thr  1] *** I listen to internal port 3933 (3933) ***
    [Thr  1] *** HTTP port 8133 state LISTEN ***
    [Thr  1] CUSTOMER KEY: >Q0820898445<
    [Thr  1] Wed Oct 24 18:28:11 2007
    [Thr  1] MsJ2EE_AddLoggedInNode: add node [305110500] into logged in list
    [Thr  1] Wed Oct 24 18:28:21 2007
    [Thr  1] MsJ2EE_AddLoggedInNode: add node [305110550] into logged in list
    Our JDK version is '1.4.2_11' and We are installing on the HA environment.
    How can I solve this problem? or What should I check about it?
    Best Regards,
    David.

    Check if the Database serivice is up and running. If this is not so.. you might have to start all over again..!!
    VJ

  • HT1349 Have gone to sync Itunes and program does not start up. Have uninstalled and reinstalled and still nothing. Very frustrating as it has 6 devices I maintain.

    Have gone to update and sync Iphones and Ipods and Itunes does not start up.

    Both the sccbase.dll and slbcsp.dll failed giving the error "LoadLibrary("xxxxxx.dll") failed. - The specified module could not be found."
    There's our likely culprits. We'd better try swapping them out on the PC.
    (The instructions I'm about to give are quite possibly going to sound odd ... I'll explain what we're doing and why at the end of the post.)
    Navigate to the C:\Windows\System32\ directory. (If you've set a different directory from \Windows\ as your Systemroot, look for \System32\in the alternate Systemroot rather than Windows.)
    Can you see sccbase.dll and slbcsp.dll in there?
    If so, drag each of them to your Desktop.
    Now close the C:\Windows\System32\ window, wait about 5 seconds, and then open navigate to C:\Windows\System32\ again. Have copies of sccbase.dll and slbcsp.dll reappeared in that directory?
    If one or both of the dlls aren't replaced and/or you get an error message from Windows saying you have a system file missing, move the dlls back into \System32\ from your desktop, and post back.
    (What we're doing here is using XP's Windows File Protection system. It maintains a \dllcache where copies of essential dlls are kept on the PC. If it detects that a dll from \System32\ is missing, or has been replaced by an earlier version, and it has a current version of the dll in the dllcache, it will move a copy of the correct version of the dll into \System32\. There's more information about this in the following document from Microsoft: Description of the Windows File Protection feature.)
    If the dlls are replaced, try restarting the PC and then relaunching iTunes again. Does it launch this time?
    If it doesn't launch, try reregistering sccbase.dll and slbscp.dll again. Do they reregister properly, or do you get an error message again?

  • Updated to 4.01 and it would not start, removed and loaded 3.6 with no problems ??? running XP SP2

    Have been using ver.3.6 for months and have not had any problems, tried to update to 4.01 and it would not "start", even after re-starting the pc. Removed and reloaded ver.3.6 and no further problems.
    System is a XP SP2 ???
    Are there any issues with ver 4.01 on XP

    No, there are no issues running FF4x on Windows XP. I have that OS installed myself.
    You appear to have McAfee Site Advisor installed. Versions prior to 3.3.1 are incompatible with Firefox. See https://www.mozilla.com/en-US/blocklist/
    See also: http://kb.mozillazine.org/Problematic_extensions
    Disable McAfee Site Advisor in Tools | Add-ons | Extensions and then update Firefox again via '''Help '''| '''Check For Updates'''.

  • My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seco

    My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
    Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
    Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
    thanks.
    Sorry my bad Inglês.

    Try a reset hold home/sleep buttons until Apple logo appears
    If that does not improve try a restore
    http://support.apple.com/kb/HT4137
    For your information
    We are NOT Apple here we are all users helping other users
    so emotion is ignored

  • HT2305 My iPod is not being read by iTunes. What do I do to be able to sync my iPod if iTunes is not starting the setup wizard for the iPod when it is connected to a Dell PC? I am new the iTunes and iPods.

    My iPod is not being read by iTunes. What do I do to be able to sync my iPod if iTunes is not starting the setup wizard for the iPod when it is connected to a Dell PC? I am new the iTunes and iPods.

    Hello, BAHannebaum.
    The article below should resolve any device not being recognized in iTunes issue that you are experiencing.  The most common issues are the Apple Mobile Device Support driver or iTunes is outdated.  Start with the first step and test the results after each step processed. 
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H. 

  • System is not visible in SAP MMC

    Hellu Guys ,
    System  is up ad running fine ,but it is not visible in SAP MMC .
    Kindly let me know that how to activate in MMC .

    You cam add snapshot in MMC , check in menu
    File --> Add/Remove Snap-in -->Add --> SAP System
    Provide detail as required.
    Regards,

  • Hello i have reset my iphone 4 .3.3 and till now not start again i have the apple on the screen and nothing else what i want to do thank you

    Hello i have reset my iphone 4 .3.3 and till now not start again i have the apple on the screen and nothing else what i want to do thank you

    Try resetting the device by pressing the Home and Sleep/Wake button for several seconds, the device should then boot up.

  • I have installed LR 6 for windows (win7) and LR will not start but hangs up

    I have installed LR 6 for windows (win7) and LR will not start but hangs up. I have uninstalled the software and re-installed it, Tried to open it as Administrator and it still hangs up with the Adobe banner (the picture) being displayed. Nothing happens. When I click on anything I get the message that Lightroom is not responding. I have asked to have a new catalog created for Lightroom 6............Please help.
    Thank you. Leo

    hbereth,,
    It is Ideal to install Creative Cloud app , if you are using Adobe apps.
    Creative Cloud is nothing but an updated version of Adobe Application manager. Adobe Application Manager is required for different purposes like Activation, Update.process and installation processes.etc
    Adobe application manager must be up to date , that brings to Creative Cloud application which is the updated version .
    No need to Sign in and all , just keep it install, if you are not okay with installing Creative Cloud app. it's okay , you can still have Adobe Application Manager only.

  • I have not used ipad from last 1 year and now its not starting any suggestion how to start, i have not used ipad from last 1 year and now its not starting any suggestion how to start

    i have not used ipad from last 1 year and now its not starting any suggestion how to start,

    Using the Supplied iPad charger, Connect it to the mains for at least 60 minutes...
    Then try to turn it on.

Maybe you are looking for