A4j integration with an existing datatable
Hi,
I am new in using ajax. Could any body help me out in adding ajax4jsf for a datatable so that only the contents of the datatable will get reloaded not the entire page.
>
Jayaprakash V wrote:
> Already configured a demo charm setup in our system and working succesfully
>
> How to integrate ChaRM configuration which is made on the Solution Manager to a ECC production landscape, otherthan logical components and other setup. There is also a PI landscape which is to be integrated to the same charm configuration after this. What are the modifications to be on the TMS of ECC landscape to make this to happen, Should i use Domain Linking technique to link the ECC and PI landscape with ChaRM
Hi,
Your question seams not be VAR specific.
I could offer you to move this thread to the general forum.
Just let me now.
Best regards, Ruediger
Similar Messages
-
Charm Integration with an existing landscape
Already configured a demo charm setup in our system and working succesfully
How to integrate ChaRM configuration which is made on the Solution Manager to a ECC production landscape, otherthan logical components and other setup. There is also a PI landscape which is to be integrated to the same charm configuration after this. What are the modifications to be on the TMS of ECC landscape to make this to happen, Should i use Domain Linking technique to link the ECC and PI landscape with ChaRM
My advance thanks
Prakash>
Jayaprakash V wrote:
> Already configured a demo charm setup in our system and working succesfully
>
> How to integrate ChaRM configuration which is made on the Solution Manager to a ECC production landscape, otherthan logical components and other setup. There is also a PI landscape which is to be integrated to the same charm configuration after this. What are the modifications to be on the TMS of ECC landscape to make this to happen, Should i use Domain Linking technique to link the ECC and PI landscape with ChaRM
Hi,
Your question seams not be VAR specific.
I could offer you to move this thread to the general forum.
Just let me now.
Best regards, Ruediger -
User license query while integrating with SAP HR system
One of our clients wants to develop web based employee self service applications (web enabled modules) on their existing SAP HR suite.
Currently they are on SAP HR , ECC 5.0
Would they need to buy extra licenses for integration with the existing system or can the existing licenses be used concurrently?
I am not sure where to look for this piece of information. In case this question is inappropriate to this forum my apologies for the same.
Best Regards
YuvarajYuvaraj,
The best thing would be for your client to contact their SAP account representative and check how many and what type of users their existing licensing agreement with SAP includes.
Best Regards,
Alexandra -
Integrating a PHP Web App with an Existing Azure Mobile Services and Mobile App
I've got an existing mobile app that is integrated with Azure's mobile services. The mobile services are currently connected to Azure Active Directory with MFA enabled. I'd like to build a separate PHP-based web application (Azure VM) that uses this existing
mobile service and authentication.
I reviewed the Azure PHP SDK, but didn't see any tie-ins to the Mobile Service. Additionally, Azure has some great tutorials, but for mobile services they all seem to focus on iOS, Android, and Windows phone. Any insight into how to tie a PHP-app into this
backend would be much appreciated!Although there isn't any client library for PHP, you can still access Mobile Service using the
Azure Mobile Service REST API.
Abdulwahab Suleiman -
Integration with existing business applications
Hi, could anyone share with us in what way OBIEE is commonly integrated into our existing business applications?
By a linked page embedded or just let users log in to dashboard or any by api or by webservice or any others?
Thanks!Hi
please refer following links, so that you can get some understanding in using SOAP API of OBIEE with other technology(Java/PHP) web applications...
http://oraclebizint.wordpress.com/2007/07/31/customizing-obi-ee-soap-api/
http://gerardnico.com/wiki/ide/eclipse/eclipse_how_to_consume_a_webservice_with_wtp
check below url in your local installation to see what are the web service methods available for you to communicate..
http://localhost:9704/analytics/saw.dll?WSDL
for a simple and easy way 'gourl' functionality can be used..but necessary care to be taken as you pass your username and password in url parameters..
check below tutorial..
http://oraclebizint.wordpress.com/2007/07/30/customizing-obi-ee-%E2%80%93-go-url-parameters/
hope thats solves your problem!
-Niranjan K -
Integrating MetadataRepository with an existing DataBase
In OAS10G 10.1.2 ,how to integrate MetadataRepository with an existing DataBase10g
You'll need to use the Internet port on the device,
Also you may need to enable the web management portion of it.
dial ****7932# and then press 1 # and 1 to save -
Using a4j to load a rich:dataTable after the page loads
I have a rich:dataTable that calls a session bean which executes an SQL query to generate the data to be displayed in the table. Something simple like:
<rich:dataTable rowClasses="evenRow,oddRow"
rows="30"
value="#{Bean.items}"
var="items">
where Bean.getItems() performs an SQL query and returns List<Item>.
The problem is that the query takes a long time to execute (~45 seconds) and I'd like the page to initially load while the query is being executed, displaying a spinner while it loads. Once the query is done, I'd like to update the initially empty table using ajax.
I set up a spinner using a4j:status and it works fine after the page initially loads (using a rich:datascroller).
However, the page will not initially load until the query completes, which is a problem because the query is so slow. What happens is the user clicks on the "List Items" tab from my site's homepage, sits there on the same page for 45 seconds with absolutely no visual indication that anything is happening, and then finally is taken to the list of items page.
What is needed to make the dataTable load via AJAX the first time, as well as all subsequent times?
Thanks!
Edited by: rcrowell on Sep 8, 2008 5:42 PMrcrowell wrote:
The issue isn't the PK of the table; the query is joining across many tables and aggregating data from one table in particular with millions of rows. The table has paging, but again that won't help the timinig issues due to the aggregation that must be performed on a large table.
Surely there must be a way to get the dataTable to always load its data via ajax, and not only after the first time.Well JSF does not have AJAX built-in, so why would there be? Perhaps one of the AJAX-based frameworks has this. I imagine it wouldn't be hard to do with the existing AJAX frameworks even without a built-in component specifically for it. Trigger an AJAX action on load which rerenders a panel which will only contain the dataTable upon the rerendering.
>
I think I could do it by adding a 'dataTableRendered' variable to the bean and using a jsFunction to set this variable to True when the page loads, but I'm looking for a better way. (I'm also not 100% sure this would do what I want.) -
Java Stack mandatory for a SAP BI system integrated with EP?
Hi Guru's,
Currently we are using SAP NetWeaver 2004 s version 7.0 system for our BI.
This is integrated with the EP. But our BI system does not contain the Java Stack installed.
When we work on WAD templates and execute the template, it is automatically directed to EP portal where we can see our reports.
Here my question is do we need Java Stack for this system to use ADOBE DOCUMENT services or can it work with EP only for the web functionalities.
Any info on this is of great help.
Best Regards
KumarHI Reddy,
We came to know from our basis team that we do not have the Java Stack installed in our BI 7.x system yet.
As it is integrated with EP which has Java, our web reports are working.
1) But my question is still do we ned to install the Java Stack in our BI system as i do not find any Export to PDF option in EP for the reports (eventhough AS Java supports this).
2) Or can we use the existing configuration without Java STack integrated to EP for the new tools like Report Designer and Integrated Planning?
Regards
Kumar -
RE: Legacy Integration with PI/Open
Greg -
We are currently working on wrappering the APIs for UniVerse (aka Pick on
UNIX).
We received some help from the guys at RTD in Denver.
We tested out a C program that uses the Universe APIs and it works fine.
We will be building the Forte piece and compiling it this week.
Our first application is to inquire the UniVerse data, after that is
successful, we will move to inserting & updating.
Let us know how we can help.
Larry McCartney
[email protected]
(203)459-7959 - Trumbull
From:
[email protected][SMTP:[email protected]
om]
Sent: Monday, October 12, 1998 11:00 AM
To: [email protected]
Subject: forte-users-digest V1 #1111
forte-users-digest Monday, 12 October 1998 Volume 01 : Number
1111
In this issue:
Legacy Integration with PI/Open
is OBB32.dll available
Java Integration
Java Integration
Re: Legacy Integration with PI/Open
RE: Forms That Will Not Close
RE: Forms That Will Not Close
RE: Forms That Will Not Close
Re: AfterValueChange event trigged when it shouldn't be...
math library
From: [email protected]
Date: Mon, 12 Oct 1998 09:49:56 +1000
Subject: Legacy Integration with PI/Open
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.
Thanks in advance for any help.
Greg Barber.
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you
received
this in error, please contact the sender and delete the material from any
computer.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "sridhar t" <[email protected]>
Date: Sun, 11 Oct 1998 22:01:36 PDT
Subject: is OBB32.dll available
hi,
am working on forte3.0.G.2. when i tried to use objectbroker library i
am unable to find the runtime objectbroker library (OBB32.dll). is this
dll available with this version. if not is there any alternative.
thanks,
sridhar,
Goldstone Softech USA
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:12:22 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:26:26 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Tim Hagemann <[email protected]>
Date: Mon, 12 Oct 1998 09:21:06 +0200
Subject: Re: Legacy Integration with PI/Open
Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have arequirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experiencein
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue isthat
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering
the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 09:38:25 +0200
Subject: RE: Forms That Will Not Close
Exiting the event loop will not close the window! Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
Hi,
We seem to be having some type of deadlock problem when trying to
close
forms and am wondering if anyone else has experienced this problem.
The
phenomenon does not always occur and is not specific to any one client
machine.
I will explain the phenomenon:
1. We have an object that contains our main application startup
method.
This method then instantiates our main application window (Control)
and
invokes the Display() method using start task.
2. All other forms created by the application are created using a form
manager service object which exists on the client partition. The form
manager has a CreateForm() method which instantiates a form class of
the
specified type and invoked the form's Display() method using start
task.
3. Each form has a Close push button which when clicked invokes
Window.RequestFinalize().
Now, the problem we have is this:
The user starts the application and the main application window is
displayed. The user then selects an option from the main window and a
child form is created using the form manager service object and is
displayed. The user can continue to create more child forms by
selecting
options from the main window and all child forms are instantiated and
displayed correctly.
However, when the user attempts to close one of the forms the form
does
not close. The finalize event is triggered and the event loop is
exited,
but the form continues to be displayed and does not close. If the user
then moves the mouse pointer over the main application window, the
child
form immediately closes. Moving the mouse cursor over other child
windows (or even the desktop) does NOT do this - only when the mouse
cursor is moved over the main window does the child form close.
Does anyone have any ideas on this?
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>- -
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Jason de Cean <[email protected]>
Date: Mon, 12 Oct 1998 17:47:20 +1000
Subject: RE: Forms That Will Not Close
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as well
Regards,
Jace.
On Monday, 12 October 1998 17:36, Rottier, Pascal
[SMTP:[email protected]] wrote:
Exiting the event loop will not close the window!
Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits
the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 11:04:24 +0200
Subject: RE: Forms That Will Not Close
Jason,
No, self.Close() should close the window. This is the
method I referred to. You could place a traceline
behind self.Close() to see if it is executed. It is not
inconcievable some exception may exit the Display()
method before self.Close() is executed.
After that, maybe, some events from your main
window trigger something that causes a call like 'My-
Window.Close()', where 'MyWindow' is a subclass of
'UserWindow', so 'MyWindow' gets closed after all.
Maybe you've overridden 'Close()', so now it doesn't
work properly anymore.
Are you sure you exit the event loop after you press
the close button?? The display method is not regis-
terred for any <PushButton>.Click event, though maybe
you just didn't include the full Display method in your
mail.
Remember that an event loop will only respond to an
event if it is not currently handling an event. So, the
method behind <PushButton>.Click may call a self.
Window.RequestFinalize(), which will cause an After-
Finalize event to be posted, which will be placed in
the event queue. If this method however keeps waiting
for something, the event loop will not respond to the
AfterFinalize event, until this method is done waiting.
Pascal.
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as
well
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Thomas Kunst <[email protected]>
Date: Mon, 12 Oct 1998 14:28:55 +0200
Subject: Re: AfterValueChange event trigged when it shouldn't be...
Which version of Fort=E9 are you using? We had some strage problems with
GUI events in Fort=E9 3.0.F.2, which disappeared now that we use 3.0.J.1!=
Fouche, Jaco wrote:
=
Hi there,
=
I'm hoping that someone out there has experienced the following (and
knows why it is happening. ) :-)
=
I have a couple of windows on which the AfterValueChange event is
triggered on a field upon hitting the delete key.
We all know that this should only happen upon leaving the field, ie. th=e
field loosing focus. The problem is that I'm trying to recreate this in=
a simple test class, but now it won't happen. I still have the original=
windows on which it is happening, but I would like to construct
something small and simple to send to Forte.
=
Any ideas as to why this could be happening?
=- -- =
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Greg Gorham <[email protected]>
Date: Mon, 12 Oct 1998 09:51:07 -0400
Subject: math library
I need direction to the source of Forte libs that handle more scientific
math. Also included is the need for more scientific print formating. I
understand, second hand, that such material is available from third
party vendors/sources.
Thanks
Greg Gorham
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
End of forte-users-digest V1 #1111
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
Unity Connection Integration with CS 1000 and Meridian 81 - PIMG
I have a customer who have (2) Nortel Meridian 81 and (1) CS1000 for their 3 locations along with Octal 350 servicing 2500 voicemail users today. Customer also has a Cisco UCM in their network today which is servicing their wireless phone users.
UCM and CS1000 are networked together using Q.Sig trunks today. Customer is looking at replacing their Octal solution with a new Voice mail solution.
I was looking at integration documents for Unity Connection using PIMG.
In this scenario, would I need 3 separate PIMG 's at the three remote sites and integrate it with Unity connection or Can I achieve this using just one PIMG at one of the sites, considering the three sites are trunked together using tie-trunks.
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/7x/integration/pimg/guide/cucintpimg090.html#wp1051831
Appreciate any pointers/ help.Hi there,
Just to add a note to the great tips from Hailey (+5 Hailey!)
We are in the final stages of replacing our "old" Octel with Unity Connection, part of
which is integrated to our CS1000 and CUCM in a "Hybrid" deployment like yours
Centralized Voice Messaging
Cisco Unity Connection supports centralized voice messaging through the phone system, which supports
various inter-phone system networking protocols including proprietary protocols such as Avaya DCS,
Nortel MCDN, or Siemens CorNet, and standards-based protocols such as QSIG or DPNSS. Note that
centralized voice messaging is a function of the phone system and its inter-phone system networking,
not voice mail. Connection will support centralized voice messaging as long as the phone system and its
inter-phone system networking are properly configured.
Setting Up a Nortel Meridian 1 Digital PIMG
Integration with Cisco Unity Connection
Attachments:
cucwithnortel.pdf (308.1 K)
Centralized voice messaging provides voice messaging services to all users in a networked phone system environment. Connection can be hosted on a message center PINX and provide voice messaging services to all users in an enterprise assuming the message center PINX and all user PINX phone systems are properly networked.For a centralized voice messaging configuration to exist, a suitable inter-phone system networking protocol must exist to deliver a minimum level of feature support, such as:•Message waiting indication (MWI).•Transfer, which ensures that the correct calling/called party ID is delivered to the voice messaging system.•Divert, which ensures that the correct calling/called party ID is delivered to the voice messaging system.Other features may be required depending on how the voice messaging system is to be used. For example, if it is also serving as an automated attendant, path-replacement is needed as this feature prevents calls from hair-pinning.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/design/guide/7xcucdg050.html#wp1053538
Cheers!
Rob -
OIM Integration with Active Directory Federation Services (ADFS)
Hello friends
I have a question about the integration of Oracle Identity Manager with Active Directory which is federated with another external directory for ADFS. My question is:
What considerations should be to contemplate if I have an active directory federated environment when carrying out the integration with Identity Manager?
I use version 9.1.0.2 of Oracle Identity Manager with Microsoft Active Directory Connector User Management 9.1.1.7
Thanks for the support.First consideration is that the OIM's target ADFS - in the federated scenario, will that participate as a Service provider or identity provider. I would think identity provider.
Next consideration: What all attributes are required to be played in the SAML assertion to the other end-point? All these attributes must be present and should be provisioned to the AD in this case.
So, OIM should be set up (UDF etc) to provision all those attributes needed in the SAML.
Next consideration: What all scenario to support? IdP initiated or SP initiated? If SP initiated, then process will hv to be defined if a user id does not exist in the AD of the OIM target. Will the request be failed or a in-time provisioning should happen.
Hope this helps. -
CRM 5.0 Integration with Twitter and facebook
HI Experts,
i am working with SAP CRM 5.0 version,
My existing client want to set up SAP CRM with twitter and Facebook specially customor services ,
Does SAP CRM 5.0 has tight integration with twitter and facebook ,
if yes will you please share iinformation in terms of
1)Effort Estimation :manpoer
2)Costing details
Thanking you in advance
Pravin shete@sherrysarath: Could you share some documents to understand how standards works for this issue? And if there aren't standards requirements, could you share your custom solution.
@pravin wipro : Could you explain what are your requirements? -
SOA 11g Worklist Apps Customisation and Integration with Plumtree Portal
Hi,
We want to migrate an existing application build using SOA Suite 10.1.3.3 to 11.1.1.2.0.
In the 10g application the worklist application was customised and the customised apps was linked as a remote portlet in BEA Plumtree Portal.
1)In 10g the worklist application source code is available (\SOA_Oracle_Home\bpel\samples\hw\worklistapp) for customisation but is that possible for 11g ?
(The location of the default deployed worklist apps in 11g is /../mdw_home/user_projects/domains/soa_domain/servers/soa_server1/tmp/_WL_user/worklistapp).
Can we take the source code and customize in jdev and deploy under a different contextname in 11g??
3)Our existing 10g worklist was customised a bit in terms of look and feel and for some custom authentication and it was deployed in the 10g SOA Server.
A sample jsp application was created and the login page of the custom worklist apps was linked in a inframe so that it works when integrated with the Plumtree portal as a remote portlet. And this worked perfectly in 10.1.3.3 SOA Suite.
However the 11g SOA worklist login when tagged in a jsp as an inframe in plumtree portal is giving a warning message
Warning: Unable to load content in a frame. Frame content will load at the top level. On cliicking the OK button the worklist page is opening. This is with Firefox browser . however form IE7 or 8 its timing out from portal.
As per http://newsoalife.blogspot.in/2009/09/framebusing-in-adf.html
changing the web.xml for the worklist can help.
Can anyone please let us know on the same as this appeas an unsupported one.
Regards
AshifHi,
Can you check the log file.u are getting any error.can you check wf_error table also u are getting any error.
Can you check consumer in AQ tables.
Thanks,
Rahul -
Computer Telephone integration with CRM
Hi ,
We have a requirement to integrate existing Interactive Voice Response system,Computer Telephone Integration and Automatic Call Distribution with proposed SAP CRM. In order to integrate them we would like to use third party adapters from companies like AMT,SIEMENS,Genesys etc..
1. Does any one has experience in integrating these tools ?
2. Or is there any other better approach for the integration with CRM?
Thanks for your time.
SunilHi Tony-
I am vinod, working in Accenture, India. I am a genesys engineer, have little knowledge of SAP CRM.
We made a successfull RFC connection to gplus in sm59, then i tried to create a telephony server in sphb, but this connection test failed. Am i going in the right path, or is there any other way to do this.
Is maintaining telephony server in SPHB mandatory or is there a similar setting in CIC0 configuration?
Can you please let me know how this can be done. Please provide me if you have any documents on this.
Thanks in advance -
Org chart integration with Who's who
Hi All,
I am using ERP2004 SP10.
I am able to call org chart from who's who. but it opens in same window, so lose the result list when i exit from org chart. I want org chart to appear as pop up. How can i achieve this. I have already specified page/iview for org chart as "Open in new window" but this is not helping.
Any suggesstion will be great help.
regards,
SudhirHello Kristian,
I have done what you say in your answer to Sudhir about the 'Org chart integration with Who's who'. The error about: "Service EMPLOYEE_ORGCHART_SERVICE does not exist" is ok. However, when I click on the link to the org chart from who's who now, we obtain a new blank page. There aren't any information in this new page. The browser try open the next url:
"http://epdes6.rtve.int:50000/irj/servlet/prt/portal/prteventname/navigate/prtroot/pcd!3aportal_content!2fcom.rtve.ess.carpeta_rtve!2fcom.rtve.xss.carpeta_rtve_common!2fcom.rtve.xss.carpeta_rtve_mss!2fcom.rtve.xss.desktop_rtve_default!2fframeworkPages!2fcom.sap.portal.frameworkpage!2fcom.sap.portal.innerpage!2fcom.sap.portal.contentarea?NavigationTarget=&WebDynproNamespace=sap.com/ess~org&WebDynproApplication=Orgchart&DynamicParameter=sap.ess.org.pernr%3D13036077%26sap.xss.popup%3DX%26sap-wd-cltwndid%3DWID1222874619010%26sap-wd-tstamp%3D1222875709018%26sap-cssversion%3D6.0.15.0.0%26sap.xss.menuhdr%3DSAPDEFAULT%26sap.xss.menuargrp%3DZRTVEDEFAULTESS%26sap.xss.menuarea%3DZRTVE_EMPLOYEE_SEARCH%26sap.xss.menusrv%3DEMPLOYEE_ORGCHART_SERVICE&TarTitle=Orgchart"
Can you help me?
Thank you.
Ana.
Maybe you are looking for
-
"24427 Access to Active Directory failed" error in ACS 5.1
Hello, I'm working on implementing a RADIUS authentication for wireless access with the following : - PCs running Windows 7, protocol used is PEAP (without validating the server certificate to make it simple at first), - AP 1252 configured to use a
-
Strange Blue Border on rollovers?
I have just moved over to CS3 and was trying to place a rollover into my table but DW keeps putting a blue border around the cell in the table and throws off the table completely plus it is still visible when I preview in the browser. I never had thi
-
How to open Pagemaker 7 files in InDesign CC 2014?
This was possible in the earlier Versions of InDesign but in the latest Version 2014 it is not possible. Are there some Plug ins one can get to open thos files?
-
Cups-pdf produces ugly , hardly readable documents
I think the title of the post says it all. System is up to date, cups-pdf setup is as in the wiki. To illustrate what I mean, here is a sample image (try to view it full-size). Left side created with cups-pdf, right side with the built-in "save as pd
-
Instructions for Enabling and using the "root" user in OSX 10.8
Seems to have changed since 10.6. Any suggestions?