A50 does not start properly

My a50 after 3 hour use, failed.(it is new) suddenly a black screen came, fan working but pc was not responding to any action that i imply.
After than when i want to start system,nothing happens just a black screen and a green system is on light. No fan, no hard disk movement.
What can be the problem?

Hi
do you use the A50 with battery because after 3h the battery is empty!
Did you try to remove battery? Unplug the power supply and remove battery for a short time and try to start again.
Do you remember what are you done exactly when black screen came?
Also a reinstallation of the Power saver can help!

Similar Messages

My I Mac does not start properly without pressing option and apple keys ,and it freezes

My I Mac does not start properly without pressing option and apple keys ,and it freezes

Try any of the following:
http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM
Disconnect all devices from the computer then do the following:
Boot up from your Snow Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
Troubleshoot the spinning beach ball/freezing & crashing

[SOLVED] samba does not start properly

I have three machines ( desktop, laptop, and a mini-itx "homeserver" ), and I use samba shares on all the three machines.
The homeserver is headless, does not have a DE, and launches samba properly any time.
On the other machines, the samba service launches ( I can see it on the screen as arch starts ) but does not really start.
I found that smbd is always running, but nmbd never starts when arch starts up.
When the startup is complete, I type "/etc/rc.d/samba restart", and it launches the samba service properly, on both machines.
The smb.conf file is identic on all the machines, except for the server string and the specific machine's share location/name
What can be wrong? Why does nmbd not start on both machines? (Or why does it on the third?)
Last edited by scar (2012-07-12 13:57:46)

Samba is in my daemons array in rc.conf. I've already tried to start it in backround too ( @ ). Did not work.
I've already tried the /etc/rc.local thing, but not with a sleep before the service start command.
Will try it.
Currently I'm using my laptop ( Wicd, not networkmanager , and the first post (skrooge) did not work.
I'll try it this evening with nm.

[SOLVED] samba does not start properly again -this time with systemd

Definitely no luck with this one...
So, today I've switched to a pure systemd init system, and noticed that I have this old issue again.
(Link to my old thread: https://bbs.archlinux.org/viewtopic.php?id=142704)
Samba doesn't start properly again, more precisely smbd is launched but not nmbd, so samba is not working as it should (for example smbtreee lists nothing).
Last time I've solved it by putting samba long before networkmanager in the daemons array, but with systemd I'm a bit confused...
Anyone has this issue?
Last edited by scar (2012-11-03 07:05:42)

I think that nmbd isn't waiting for networkmanager to start on my system, because I'm getting journal entries like
Oct 31 00:47:21 spacebar winbindd[431]: [2012/10/31 00:47:21.556005, 0] param/loadparm.c:7969(lp_do_parameter)
Oct 31 00:47:21 spacebar systemd[1]: nmbd.service: main process exited, code=exited, status=1
Oct 31 00:47:21 spacebar systemd[1]: Unit nmbd.service entered failed state.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> (eth0): carrier now ON (device state 20)
Oct 31 00:47:22 spacebar kernel: r8169 0000:03:00.0: eth0: link up
Oct 31 00:47:22 spacebar kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> (eth0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40]
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Auto-activating connection 'Static'.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) starting connection 'Static'
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> (eth0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started...
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting...
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> (eth0): device state change: prepare -> config (reason 'none') [40 50 0]
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started...
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> (eth0): device state change: config -> ip-config (reason 'none') [50 70 0]
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) started...
Oct 31 00:47:22 spacebar rpc.mountd[462]: Version 1.2.6 starting
Oct 31 00:47:22 spacebar systemd[1]: Startup finished in 3s 850ms 155us (kernel) + 21s 279ms 972us (userspace) = 25s 130ms 127us.
Oct 31 00:47:23 spacebar NetworkManager[391]: <info> (eth0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Oct 31 00:47:23 spacebar ntpd_intres[441]: DNS 0.au.pool.ntp.org -> 116.66.160.39
Oct 31 00:47:23 spacebar NetworkManager[391]: <info> Policy set 'Static' (eth0) as default for IPv4 routing and DNS.
Oct 31 00:47:23 spacebar NetworkManager[391]: <info> Activation (eth0) successful, device activated.
Oct 31 00:47:23 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) complete.
Oct 31 00:47:23 spacebar dbus[401]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Oct 31 00:47:20 spacebar smbd[428]: [2012/10/31 00:47:20.771872, 0] param/loadparm.c:7969(lp_do_parameter)
Oct 31 00:47:20 spacebar smbd[428]: Ignoring unknown parameter "user client driver"
Oct 31 00:47:20 spacebar smbd[428]: [2012/10/31 00:47:20.794252, 0] lib/interface.c:543(load_interfaces)
Oct 31 00:47:20 spacebar smbd[428]: WARNING: no network interfaces found
Oct 31 00:47:20 spacebar smbd[428]: [2012/10/31 00:47:20.805126, 0] smbd/server.c:1109(main)
Oct 31 00:47:20 spacebar smbd[428]: standard input is not a socket, assuming -D option
Oh, this started happening after putting a MUCH faster cpu and motherboard in the system, so maybe there's a race-condition there?
Last edited by MisterAnderson (2012-10-30 04:59:46)

My mac book pro does not start properly. It goes past logo then grey screen I cannot access my

MMy MacBook pro will not start up. It goes past the apple logo then only a grey screen, sometimes a blue one with vertical stripes. I have tried starting from a disc also by using different keys, but with the same result. At one point i heard three beeps then a pause repeated. Please help.

See if you can run an Apple Hardware Test:
http://support.apple.com/en-us/HT201257
Note an error free AHT is not definitive.
If addition to the possibility of a RAM problem, the vertical stripes on the blue screen is not a good sign.
Ciao.

PSE7 Organizer does not start properly, screen flashes, PC stops

Hello. I can't find this problem mentioned on the forum.
I've used PSE4 and 5 in the past without problems. Have just completed a clean install of PSE7 (no PS or PSE previously installed on this system, a ThinkPad T60 with 2MB). The Editor runs fine.
I ran the Organizer once, set some preferences, pointed it at a small number of images to import, then the whole screen started flashing and soon my system stopped in its tracks - no blue screen.
Now, when I try and start the Organizer, it spends maybe half a minute "Generating thumbnails" without success (all the thumbnails have egg timers on them). It uses 50% CPU. It still says "Generating thumbnails" after half a minute or so when the screen starts flashing and the system crashes again.
Any ideas?

Fixed. Thank you John.
I renamed the preferences file but that made no difference.
So I repaired the catalog (errors were found) and optimized it. When I started the Organizer, thumbnails were displayed (that's progress) but then the screen-flashing started again (whole screen, as usual, not just the Organizer window). Before I could close the Organizer, my system stopped with a blank, black screen, and no response to any input. I had to hold the power button to power down. On reboot, it blue-screened. On next reboot it started normally.
So I created a new catalog and the Organizer started fine. Then I set it off getting photos from a folder of folders of jpegs (with the odd txt and other file type). After a few seconds, the screen-flashing started again, and I quickly closed the Organizer.
When I restarted it, the catalog was empty, so I had it get just one folder of photos at a time. On the very last one, the problem started again. I found an AVI file that I'd overlooked, removed it, and the problem went away. The AVI was one I recorded on a digital compact.
The Help for Organizer says:
"The Organizer catalogs video AVI files properly, but audio AVI files are shown as broken video thumbnail icons. However, they will play correctly."
Hmmm...doesn't seem to be the case for me. Even if AVIs were unsupported or known to cause problems, I would never expect to see the symptoms I did.
Hopefully my experience will help others. Incidentally, I run XP Pro SP3, fully updated.

Macbook Pro does not start properly

I have a Mid 2010 15" Macbook Pro that requires 2-5 pushes of the power button to start after being off for more than1/2 hour.
Once it does start i can power it off and back on again with no issues.
I have reset smc and pram,changed ram, tested different ram banks,unplugged everything off logic board,tried just battery power,tried just ac power,
tried both ac and with battery attached.All the updates have been installed on new install of Mavericks.
Any help would be greatly appreciated.

You have taken all the "standard" troubleshooting steps.
I suggest you take it in for diagnosis.
Barry

DB adapter does not start properly, status 'suspended'

Hi all,
I'm experiencing problems when starting multiple db adapters in my Interconnect 10.1.2. configuration on HP/UX.
I start the adapters from the command line with the start script. The first two or three adapters start up completely, after that the next adapter commences startup, but the process seems to hang when it wants to subscribe to a message.
From within ICManager, the adapter has status 'Suspended'. If I use ICManager to restart one of the running adapters, the one that was hanging resumes startup and is running fine after that. The adapter that was restarted also starts and all is up and running.
However, when I use this scenario to start yet another adapter, the adapter that is restarted with ICManager doesn't start but seems to hang at the same point and gets status suspended!
In COMPONENTINFO table in the ICHUB schema all adapters are visible.
Any help would be greatly appreciated!
Rob

Hi,
I have exactly the same problem.
Do you remember how did you solve this problem ?
Jack

The start/stop bar on my i Tunes app does not respond properly. Please advise.

The start/sop bar on my i Tunes app does not respond properly. Please help.

It can be that the library path, or files, are corrupted. What happens if you set a different path to save the library?

When you turn on the ipad2 it does not start up properly. The rotating disk that happens when you turn off the ipad appears after the apple logo comes up

When you turn on the ipad2 it does not start up properly. The rotating disk that happens when you turn off the ipad appears after the apple logo comes up during start-up and stays there for ten minutes. Then, the ipad will start up properly.

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

TestStatnd operatore Interface does not close properly

Hi
I am using LabVIEW 8.2 and TestStand 3.5. I use the default Operatore Interface (full featured) provided by NI. The TestExec.exe does not close properly when I exit the application. Everytime the process is running in windows. I had to use Windows Task Manager to kill the TestExec.exe manaully.
Is there a fix for this?
Thx
Abdulla

Hi,
Do you start any new executions either from within your sequences or from within a step that you are not closing properly?
Regards
Ray Farmer
Regards
Ray Farmer

Image display control scrolling does not work properly when zoomed in

I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
Has anyone noticed this behaviour, and what would be a reliable solution to avoid this?
Dirk

Hello,
no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
I have attached a VI for simplicity (although there is hardly any code in it).
If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position.
I think it is a bug in the implementation of the image display control.
Thanks,
Dirk
Attachments:
scrolling.vi ‏818 KB

PIA service does not start

Hi,
my webserver is Weblogic (9.2, Tools 8.49 , HRMS90). PIa service does not start automaticaly when I start/boot the server. I should run startPIA.cmd. And then I can connect in 4/3.
Do you have any idea for that ?
In windows Evenetlog it says Event Type: Warning
Event Source: beasvc
Description:
peoplesoft-PIA service stopped
Thank for help.

after u install PIA , u can start the server from the cmd by issuing a command called StartPIA.cmd ,
or u can tie the domain to a service type called NT service, and schedule the service to be automatic. it keeps running as long as ur box is up. once u reboot it , service stops for a while and start again. this is automatic type of bringing up the server.
ur bEA weblogic when installed sets the path for jdk and jre which are used by the server to come up properly.
even after this if u have trouble, please paste the logs. logs are found under PS_HOME\webserver\domain_name\logs
bea logs are under bea DIR.
Thnks!

Integration Process does not start

Hi guru's
My scenario is this. From ECC we send Idocs to PI. We have an integration process to receive the idocs because only max 9999 are passed in the port.
We run just around 11000 CREMAS idocs now.
The problem is that the integration process does not start on our QA environment while it does start on DEV environment.
I've run many checks on both environments and they all look the same.
To name a few:
* Cache are all green and up-to-date.
* I checked the WF models which are behind the Integration Process and they are the same.
* Event correlation is correct in both environments
* When i test the idocs are correctly sent from ECC to PI.
However on DEV I see in transaction SXMB_MONI_BPE i see that the integration process is triggered and started. It waits 10 minutes and collects any messages that come in, and then bundles these and sends them on to the receiver.
On QA i do not see the Integration Process being started. Only records i see in SXMB_MONI_BPE are three work items, 2 completed, 1 ready, all 3 are called waiting for event.
I'm probably missing some configuration somewhere but what could it be?
Regards
Robert

Hi Eng Swee,
Thx. I checked it already and it works fine.
Meanwhile i did do some changes and some retests and now i saw somewhere that all my tests were creating more steps in an already started integration process, that was still waiting.
I now cleared some old workitems and started afresh.
What i see now is:
1) the BPM process start correctly
2) it receives 1 or 2 or 3 or n messages
3) it then waits for the deadline to finish, i.e. it should run for 10 minutes and then proceed to the next step which is sending the collected idocs to receiver.
On DEV the deadline works fine. On QA it doesn't.
IN SWU3 i have done the customizing and it shows green, so that part is OK.
Still the deadline is passed and it doesn't have the desired effect on mu BPM process (workflow).
Are there any other checks i can do to see if the deadline mechanism is properly working?
Is there a maybe a manual step i can do to trigger the deadline? Then at least i get some information on where the real problem is.
(Sorry for earlier confusion but i hadnt realized that there was still a process running)
Regards
Robert

Adobe Acrobat Pro 10 does not start anymore

This happened to me three times now. One time Adobe Acrobat Pro 10 is working properly for weeks. It crashes once and after that it does not start anymore without providing a message or clue.
What I used to do is remove CS6 completely and reinstall it. But this is tedious. Just uninstalling Acrobat Pro and reinstalling it doesn't do the trick.
My guess is that a setting is stopping Acrobat Pro from starting. Is it possible to reset Acrobat Pro settings to the factory default? I've already remove the folders under
%LOCALAPPDATA% \adobe\acrobat and
%APPDATA% \adobe\acrobat
but this doesn't help.

Ok. This occasion I had a bit of time on my hand and found a solution yuhu!
Make sure you have access to you license key as you have to enter it new after this procedure
1) Navigate to C:\Program Files (x86)\Common Files\Adobe\Adobe PCD\cache
2) Delete or rename the file cache.db
3) Open Acrobat Pro, you will be asked to license the software again under your Adobe-ID again.
4) If asked to connect to your Adobe-ID and re-enter the license key.
Now Acrobat Pro is working (as are all the other CS6 applications.

A50 does not start properly

Similar Messages

Maybe you are looking for