A536 corrupted screen display

Hi,
Good day!
Anyone can help me with my A536 phone?
It has corrupted screen display (with horizontal lines)
Please see attached pictures for your reference.
Thanks,
PJ

Factory restore would restore everything back to default, note that factory restore would delete all data and apps.
This would narrow down if there are any apps which could be causing lines issue. Also I would suggest to do a System Update first. If that does not help then factory restore. If factory restore does not help then service center.
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

Similar Messages

10.4.9 and corrupted screen display

I updated my 1.83Ghz MacBook Pro to 10.4.9 today, but when I wake it from sleep, the screen display is severely corrupted. I need to hit the power button, and get it to sleep/wake up again before the screen clears and the machine is usable. Anyone else notice this?

I am experiencing the same issue on a new MacBook Pro after going to sleep.
However, you can actually enter your log-in details (if you've set up log-in after sleep under security), and access the Finder, but the screen is still corrupted.
However, if I close the lid, and reopen, the problem resolves itself, i.e. the screen is no longer corrupted, and I can log-in as normal, i.e. so, you don't need to power cycle.
Previously, I tried resetting P-RAM, and that also seemed to temporarily resolve the issue, but it occurred again about a week later.
I have a feeling it may be something to do with the "Safesleep" file being corrupted, and I have tried to disable that via Terminal using the following command (usual disclaimer about making changes via Terminal): sudo pmset -a hibernatemode 0
(NB. default setting is 3 if you want to turn this feature back on).
I tried that yesterday, and the issue hasn't re-occurred yet, but will keep you posted. I suspect that isn't really the issue, because I'm not always trying to recover from the safesleep file, i.e. just normal sleep after a few minutes without any power loss.

ATI Displays rotate corrupted screen display

I'm running Mac OS Tiger and running AT Displays 4.5.6 and I tried to use the rotate command. I am not running an external monitor. Now the screen is rotated but totally garbled except for the mouse pointer. Even if I restart the PowerBook the screen gets messed up just before the log-in so I can't change the preference back. The computer is unusable in this condition.
I am able to start-up the computer via an eDrive I had created on a separate partition so I know the PowerBook still works fine and I can access the hard drive, but what files do I remove to get rid of this problem? Or is there some other way to get around this?

mine did this too. It used to not be a problem under 10.4.2, but the one time I tried it after upgrading to 10.4.3 it did it, I ain't trying it again.
I paniced a bit too, however, all you have to do is start up without the extensions loading (cmd shift at login). At that point my display became usuable again. I tried narrowing the pref file down, but didn't nail it - after removing all the prefs, then slowly adding them back 50% at a time through restarts I couldn't reestablish it, so I presume that one of the prefs file was remade for a standard orientation, and slipped through my net.
I repeat though, it does NOT require a reinstall, but until it's resolved, I shan't be trying to rotate the screen for better bedtime movie watching
cheers

Maverick, screen display on macbook pro corrupts

I installed Mavericks yesterday. I have a MacBook Pro 15 inch with a display 1680x1050. Since the install I have had problems with the screen display corrupting with sections of the screen covered in linear 'noise'. I rebooted the first time it happened with success. But it just happened again when an update notice flashed onscreen. I use approx 10 screens for separate software functions and it is interesting that while the noise always appears on the screen I am using it does not appear on all of the other screens.
Any ideas anyone, please?

Considering that the distortion changes with display rotation angle, it is probably the cable and not the board.

Strange corrupted screen and hanging 10.8.5 Early 2008 Mac Pro

For the past couple of days (and also a couple of times in the past I remember) I've been getting a strange corrupted screen and the computer freezes. I can still move the mouse around but nothing clicks and the computer is completely non-responsive. I can't force quit and programs or the finder and the only way out is to restart the computer.
Yesterday, when this first started happening the computer wouldn't actually restart properly and hanged at the grey screen/apple logo .
I did all the usual like booting in safe mode, which booted up and seemed to work OK but I didn't try for long enough to see if the crash happened again.
But when I tried to reboot in normal mode the same grey screen/apple logo and no further, just the mouse pointer which I was able to move around the grey screen.
I did disk utility in safe boot mode, repaired disk permissions, reset the PRAM/NVRAM ( think I've got that right).
I even did a new install of 10.8.5 - but not a complete clean install wiping the disk etc, but re-install on top.
That solved the problem or so I thought - the computer started up normally and I was able to carry on working.
But since then I've had about 4 crashes throughout the course of the day - I've been able to get work done but every so often the screen (apple cinema display) will get a funny hatched effect on part of the screen or a corrupted screen - I've attached pictures so you can see.
I've set up a Genius Bar appointment for tomorrow but wondered if anybody has any suggestions before then?

The strange thing is that a Apple Hardware Test (run from the original 10.5.8 install CD) shows no problems with the hardware.
Yes, the screen corrupted when starting up from a completely different drive and from the recovery disk this morning - suggesting to me that the fault is definitely not with a corrupted hard drive/software but on the video side of things.
How can I definitively find out if it the graphics card that just needs replacing as opposed to a new HD which my repair centre have suggested is at least one of the problems?
Confused now as to the next step forward.

Photoshop CS6 start screen displays circles around it

My Photoshop CS6 start screen displays circles around its rectangular shape. Has the program become corrupted? Should I reinstall it?

I am using Photoshop CS6 version 13.0.4 x64 on Macintosh OSX 10.9.2
Using Grab on the Mac, I haven't been successful in capturing screen shot.

Iphone 6 screen display and brightness problem

hello everybody, I'm an iPhone user and I'm currently using iPhone 6 for couple of months. lastly from 1 week ago I'm having problem in my screen display. i always set my brightness to auto and whenever i use my phone in sunny light which means brightness goes to almost 95% level after using it for a while my display goes suddenly dim and i check brightness level it still is at almost 95% level and when i screw to low level it responds normally but when increasing brightness level it still remains dim then i go inside my room and wait few minutes then again brightness respond normally which means when i increase brightness level it gives bright clear display again.. plz give me any suggestion why is this happening...thanks
iphone 6 , 64 GB, iOS version: 8.1.2

First, reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not work, and to make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the phone.
If the phone works as expected, restore from the latest backup. If the problem comes back, the backup data contained corrupt data, causing your issues.
If it still does not work, this could be a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support

On screen display and FN+ buttons don't work after format

I formatted my entire HDD and re-installed windows 7 pro. After doing the format and re-install the on screen display doesn't show up when I adjust volume or enable/disable caps lock like it did previously before I re-installed. I've installed the hotkey driver, on screen display, display interface driver, ran the Lenovo update utility several times, installed all windows updates. Is there somewhere where I have to enable OSD (on screen display)? I am sure this is just something small that I am overlooking but if anyone has any help please let me know! sorry if this has been posted already, I tried searching before making a post but didn't have any luck.
T400
Intel® Core™2 Duo T9400 2.53 GHz__Windows 7 Professional__3GB Memory__160GB, 7200RPM Hard Drive__14.1” WXGA+TFT-CFL__ATI Mobility Radeon™ HD 3470--
Solved!
Go to Solution.

A couple other things to check:
1. look in task manager, is TPONSCR.exe and TPOSDSVC.exe running?
2. look in Services control panel, is "On Screen Display" service installed and started?

X1 carbon - On screen display (brightness) does not work anymore..

I have an X1 Carbon.
Usually when i raise or decrease the screen brightness i had an on screen indicator showing me how much i decreased ot increasing either of the obove.. Now, when i do the same actions nothing apears.. can any one give me a hand?
thanks
Moderator Note: Edited subject to match content.

Hi Joben,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you are facing the issue with on screen Display on ThinkPad X1 Carbon.
Please check if the you have enabled on-screen display option in graphic properties. Please click here to know the steps for enabling on-screen display.
If the issue still persists then I suggest you to update Power Manager, Power management and Hot key feature applications.
Below is the link to enter the downloads page and download latest application accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
http://support.lenovo.com/en_US/downloads/default.page#
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

Wow! I think I had this same issue just last night.
I was cleaning my macbook pro retina on the outside. Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly. It looked super strange, it was like green halo's and it looked worse when looking at it at an angle. Of course I took no pictures!!! I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
But I digress... The image looked very green and spacey, it was almost a neat effect. After about 5 minutes it started to look a little more digital though. There were straight lines of this halo effect on the edges and top. After about 10 minutes it turned into a predominate issue with the blacks on screen. I could open a web browser and it was unnoticable on a white background. After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle. After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange. But I believe that might be all in my head now.
So yerp, lemme know what you guys figure out.

Brand New Iphone 5s Home Screen display defect

Here goes my ordeal with my Iphone 5s upgrade
After waiting in line for over an hour I purchased the Iphone 5s yesterday at Best Buy (Stonebriar, Frisco, TX). Later that evening, I noticed that when the time was 5:36, the home screen display was not showing the digit 6. Instead it showed a blur. I then changed the time manually to 6:36 and then to 6:43 and each time there was a digit 6 the display showed a blur instead. I must note that the phone was sitting in the grass which was a little moist (which I believe was the causing the issue). I immediately went back to the Best Buy location where I purchased the phone and requested a replacement after showing the defect. The store manager wanted me to wait in the line and I refused to do so (they sold me a defective phone so I did not see a reason why I had to go in that line all over again when it was just a replacement!). Anyways, after a tiff with the manager I left that store with my defective phone.
Next day, I went to the Apple store (Willowbend mall, Plano). I was greeted by genteleman at the entrance of the store who nicely asked if he could help. The moment I told him I suspected my new Iphone 5s was defective he said 'What!!' and made an expression of disbilief. Funny! I was asked to go to another peson who was standing and waving his hand further inside the store. I go to him and explain to him the problem and when I try to demonstrate it does not happen! Oh dear! Luckily I had enough screenshots in store and I showed them all to the store clerk. He then tells me that he can take the phone in for me and get it 'repaired'! In disbilief I ask him if he meant 'Replaced'? He says no, they will try to repair it first - he further speculates saying they will try a restore or maybe a front glass replacement and that if they still can't fix it, Apple will then replace the phone. In exasperation I tried to explain to him that the problem happened yesterday and then today it can't doesn't seem to happen, while adding that it is a brand NEW phone I purchased less than 24 hours ago and that I still am under the 14 day time-frame. I explain to him kindly that I would not be able to verify the fix (Apple does a restore or even changes the glass and returns me the phone and I must believe that the problem was fixed?? - Hel No!) and its not so nice to hear from Apple that they can't take responsibility for a defective product. He kindly says sorry and explains that it is policy and that they have to try to repair first. Oh how I wish I could've gotten Apple to sign my policy document for my money...sigh..don't work like that! So I left Apple and ran across to Best Buy mobile store asking for a replacement. The guy says Best Buy mother store and Best Buy Mobile store keep there own stock during holidays and he can't help. Sweet! I drive down 10 miles and go to a different Best Buy 'Mother' store and of course I'm asked to stand in the line. I swallow my pride and become a part of the line. My turn comes and again I explain the problem and of course the Best Buy clerk says 'Did you try a restore?' What!! Anyways, after a bit of reasoning (cribbing) with a couple of Best Buy agents, I was able to get them to replace my Iphone 5s (and of course they didn't have a gold color so I had to settle for the space gray..not a big deal though as long as this one is not defective also!)
So anybody had this display issue? Issue with Apple customer service?
Rs,
GH

Well they offered to do everything they could to work with you on the device....You are right in saying that the offered what they 'could'. Unfortunately what they could was tied by company policy.
Just like being human there are times things just go wrong- 2 out 2 IPhones 5s in 2 days! I hope people are doing better :-p
You fought against people at the store level who have /zero/ control over policy and had their hands tied by what theri bosses tell them to do. Agreed. I left instead of fighting. Unfortunately they are the first line of support and a manager maybe as far I'd get. Would love to chat with Steve Jobs but I guess now there is only one way for that :-p
They not only rushed you to get service to repair the device but you didn't even do any troubleshooting of your own to try to repair it. Now what if a restore had fixed your issue, you would have kept your device, your color, and what you paid for... - I disagree. If you read my original post, the problem happened the same evening I bought the phone. When I went to Apple I was not able to reproduce the issue. So you tell me how do I verify that restore fixed it? Wait and watch? After 14 days I can't even return the phone. The other speculation made by the rep was changing the glass. I would not try that for obvious reasons.
Why /wouldn't/ you try to repair something before spending your gas/time to replace it the moment something is amiss.
hmmm..
Now the 2nd new phone makes a rattling sound. Something is loose inside..I'd rather spend gas/time and return it than get them 'repair' it or give me a refurbished phone! Why? Because I can at this point and still get a new one with possibly no defects(fingers crossed) or I could find a company that makes better quality products :-p

Can I get my dock to appear on the extended screen display?

I would like to have my dock appear on my extended screen display and my lap top screen. Is this possible?
The thing that is frusterating is when I click on my dock, i have to drag everything that it pulls up onto the extended screen. I would much rather just click on the dock and have it appear on my extended screen without me having to drag it over. If I cant have my dock on both screens, is there a way that I can make my external display be the primary display and my mb pro be the secondary display?

Hi Scott,
If you want the dock on the side, rather than the bottom, you can have it on the right hand side of the right hand monitor, or the left hand side of the left hand monitor. One option, I guess would be to reconfigure things with the 24" as the primary screen, but to the left of the MBP, if you want the dock on the left. Probably not what you want for other reasons, but at least it would get the dock where you want it.
Another option might be to try the third party shareware application "Dock-it" , which allows you to create your own configurable "docks" in various locations. THis actually allows you to choose which monitor you want to locate any particular dock on, and allows placement on the sides of either or both. see http://www.gideonsoftworks.com/dockit.html
I'd been thinking about suggesting this app to Brett, too, but couldn't find the link at the time. I've been playing with it a bit since , and it certainly has some useful possibilities. The docks it creates are a little less intuitive than the Apple one, and a bit fussier to add things to, though.
Cheers
Rod

My iPhone 4S went into lock-up with a screen display image of USB connector pointing to iTunes logo. I took it to a Verizon store and they said I have a brick lock and that only an Apple retail store 50 miles away could clear it

My iPhone 4S went into lockup with a screen displaying an image of the USB connector pointing to the iTunes logo. I was traveling and took the phone to the closest Verizon store. The store informed me that I had a brick lock and that only an Apple retail store could unlock the phone. The Verizon store explained that they have seen this problem with SEVERAL other 4S users who had upgraded to the new iOS7 operating system and that to their knowledge it is too demanding to work on pre-iPhone 5S phones having a far less capable processor. The closest Apple store was 50 miles away in King of Prussia, Pennsylvania. I went to that store three days later (today) to reset the phone before flying out of Philadelphia Intl. Airport. The Apple store personnel were overloaded and not sensitive to my plight. They told me that I would have to make a reservation for a time 2 hours later for tech support. I couldn't do that without missing my flight - out of luck until I get back to Los Angeles. If the Verizon store explanation is true, Apple needs to accommodate 4S and earlier generation users and not force them to upgrade to a $459 iPhone 5S!

villebard wrote:
The Verizon store explained that they have seen this problem with SEVERAL other 4S users who had upgraded to the new iOS7 operating system and that to their knowledge it is too demanding to work on pre-iPhone 5S phones having a far less capable processor. !
The salesperson at Verizon has no clue what their saying.
My 4S and many of my friends works perfectly fine on IOS 7.3, no issue as all.

I wanted to keep my locked screen display with the time and date from turning off is that possible

So I enjoy my locked screen display with my chosen picture because it has the time displayed nice and big and its a cool nightlight but the locked screen display/wallpaper/time with date always goes black after 13ish seconds of locking it is there no way to let the locked screen stay on while charging? because it is awesome if it could stay on as a nightlight also so i dont have to press the lock button to see what time because the normal display is ugly am I just being super picky or am I not the only one who agrees or maybe it does exist im just stupid please respond when you can also thanks for reading much appreciated.

wjosten wrote:
Again, there is NO WAY to do what you asked: display the time constantly.
I have a clock app that displays the time constantly on my iPad. I use it as a bedside clock. Many clock apps have the ability to disable autolock just within that app. Whether there is one that lets you pick your own background, I don't know but I wouldn't be surprised if there were, based on the number of clock apps out there. While what I'm suggestion is not precisely what the OP asked (display the system lock screen), it seems it might be a possible workaround.

A536 corrupted screen display

Similar Messages

Maybe you are looking for