A536 notification led

Hello Everyone!
I have a problem with my A536 phone: my notification LED doesn't work for display the missed calls and sms, just for the charging of the battery. On the settings the display is turned on for everything.
Do anyone have a hint how it will work?
Thanks in advance!

Similar Messages

BB Z10 on AT&T: LED Notifications

My BB Z10 on the AT&T network has historically used the LED light to notify me of emails, texts, BBMs, etc when in "Phone Calls Only" notifications mode. Recently it stopped using the LED light in Phone Calls Only mode and I cannot figure out why. After some googling, I discovered that several BB10 users have had this problem with their device from the beginning. I have owned my device for roughly 9 months and the aforementioned issue did not start until last week. Something I may have done different is switch notification profiles via the volume keys on the side, I don't normally do this and noticed the LED stopped working in "Phone Calls Only" mode after I did this. Does anyone have any idea how to get LED notifications for texts, BBMs, emails, etc to work in phone call only notifications mode? I want the phone to be silent and not-vibrate for anything but a phone call while blinking at me for new messages. I understand I can go through and customize the "Normal" notification setting to do this but I like to be able to quickly switch from "Normal" to "Phone Call Only." Just to remove all doubt, I haven't installed an unauthorized OS or side loaded anything onto the Z10. There were not changes to the OS (e.g. updates) that coincided with the start of the issue.

OK, the 1st question would be....how exactly are you switching your "Notification profile" with the volume key??? For me, that only increases / decreases the media volume regardless where I`m within "Notification"
It is possible that something may have changed in your settings under "Phone calls only". So go to the "Notification" > "Mode: Phone calls only" and see if everything is turned "ON". If it is, then scroll down and tap on "Applications". You will see a list of "Core Applications". You`ll need to open the apps in question to see which one has its notifications turned "OFF" and turn it back "ON"
Bob4186 wrote:
My BB Z10 on the AT&T network has historically used the LED light to notify me of emails, texts, BBMs, etc when in "Phone Calls Only" notifications mode. Recently it stopped using the LED light in Phone Calls Only mode and I cannot figure out why. After some googling, I discovered that several BB10 users have had this problem with their device from the beginning. I have owned my device for roughly 9 months and the aforementioned issue did not start until last week. Something I may have done different is switch notification profiles via the volume keys on the side, I don't normally do this and noticed the LED stopped working in "Phone Calls Only" mode after I did this. Does anyone have any idea how to get LED notifications for texts, BBMs, emails, etc to work in phone call only notifications mode? I want the phone to be silent and not-vibrate for anything but a phone call while blinking at me for new messages. I understand I can go through and customize the "Normal" notification setting to do this but I like to be able to quickly switch from "Normal" to "Phone Call Only." Just to remove all doubt, I haven't installed an unauthorized OS or side loaded anything onto the Z10. There were not changes to the OS (e.g. updates) that coincided with the start of the issue.

How keep BlackBerry Q10 led notification blink longer for third apps ?

How keep BlackBerry Q10 led notification blink longer for third apps ?

Use a configurable third party app such as Hub++ or BeBuzzPro
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Red LED e-mail notification

Is the any way to keep the red e-mail notification flashing that there is a message until I view the message? Now it extinguishes after a minute or so. I have an 8703e v4.2.1.110
Thanks for any help with this issue

The red LED switches off after like 15minutes. But there are 3rd party apps that help you on that!
If your question was answered, please accept it as a sollution and / or give Kudos ;-)
Use the Search Field first! Maybe the question you want to ask already exists!

Configuration of color in LED notifications

It is missing the possibility to configure color of the LEDs!!!

@Ereeamazing Why search on Google when BlackBerry have a searchable apps world on the phone?
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

What's wrong with my LED screen?

what should I do when my computer have the following problems:
1、LED large display (rectangle) and appeared splash screen phenomenon recently, but the power light is on.
2、When played PPT file, the display is normal,but after a while,the screen splash phenomenon appeared .If I restart the LED power ,the screen will normal again.
3、2 days later, when I turn on the computer and the LED display and then play PPT file,the LED display appeared black, but the LED disply power is still light .I have tryed to restart the LED power and re-plug the transmission line,but have no any effect.

splash screen phenomenon
I do not understand what that looks like.
Can you explain more?

!!! We Want Design-Specs Of The MEGA LED-displays !!!

Every once in a while someone opens a topic in which he/she askes for a possibility to control the LED display. Some have even sent e-mails to MSI support, only to receive no for an answer. I see no reason why MSI could not release more details about the LED panel, specifically because most of us feel like a bunch of Beta-testers. Hey, we don't even ask for a complete SDK-kit, I think that sufficient knowledge about (hardware)programming is available amongst the users of this forum to make direct use of the design specifications.
Therefore I would ask you to reply to this post to make a general statement towards MSI, and hopefully convince them of releasing the so-wanted data.
JaDi.

I think you know that I want this for a long time:
sure I will support you
But unfortunatly I see just two solutions for this problems you won't like:
[list=1]
We program it
We all travel to the Taiwan headquarters and start a hunger strike on front of the main building.[/list=1]
I prefer 1
Second thing: I worte to MSI (germany) for the specs of the LCD and they transfered by to a technician/programmer in Taiwan. After his holiday he told me that he mustn't give any information about it out. This is again one more example of data protection that just blocks every kind of progress. At the moment I AM expecting an SDK. I won't spend my whole free time to do THEIR job - well and if I do - I'm sure I will charge. I've seen this trouble with the girder plugin which was very very little work compared with an LCD control - enough is enough
Why should anybody of us HELP MSI do make their products more attractive? That's what it's really all about.
Regards
Nathan

K7T Turbo Limited Edition d-led one green led 3 red leds is it my mobo?? that died

Hi people my girlfriend whas just printing somthing when the screen went black and te noise came out of my system...
I wasn't there but when i came home i opened my system and turned it one ... the D-leds went on (1 green 2,3,4 red and some noise came from my speaker (lika a weak alarm)
Swiched my video card, memory and my harddisks but no improvements. I don't know what the D-leds mean
I need some help here guys

So it is the cpu or the power supply ... if i am right the txt belongs to the picture
I think it is best to bring this machine to a supplyer, becouse i don't have a power supply unit and i can't get that freaking heatsink of the damn cpu ( ) that #$#@#@ piece of @##@@# wont get lose without risking me sticking a screwdriver trough my mobo.....
- The D-LED will hang here if the processor is damaged or not installed properly
or you have a weak Power Supply Unit.
Early Chipset Initialization
Thx for the great support guys...
If you think i should try somthing else that would help ... please let me know.

Caps lock/scroll lock/num lock/ LEDs not working - instead pop-ups in bottom RH corner of screen

Specific details; p/n: GS066PA#ABG, 4 GBytes DDR2 RAM, OS Windows 7 (6.1) Ultimate Edition 64-bit Service Pack 1 (Build 7601) DirectX 11.0. LED's were working but during one of the windows automatic updates they stopped working. I don't know which update. Now I get little pop-ups "CAPS LOCK: ON" etc (black text on white background). If I rename bttray.exe to bttray1.exe and restart the laptop, that kills the pop-ups in the bottom RH corner of the screen but it does not restore the operation of my blue indicator LED's. Can anyone help please?

Hi @haggis1 ,
I saw your post regarding the problems with the pop-ups and LED lights not working after a Windows Update. Most likely there was a problem with the update when it was installed. This Microsoft Support link will show you how to uninstall an update. Try uninstalling the most recent updates and the restart the notebook and see if the LEDs start working again.
If that fixes the issue then there is another section in that link entitled: I remove an update but it gets automatically installed. That will show you how to hide an update.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

How to display numbers in LED form

I am doing a demo software of HP33120.In this case,I will display the number and unit in LED form according to the real instrument.I don't know how to do it ,please help me.Thanks.

Hi,
The simplest way to do this, is to download the "7 segment font" from the following link.
Creating your own customized indicator is also an option, but far more time demanding.
http://digital.ni.com/public.nsf/websearch/5DCD38A1D020155386256DA9007DF506?OpenDocument
Let me know is this is not what you are looking for.
Regards
Meister
NIDK

IPhone 6 Plus LED alert not working.

I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1. I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.

Nore wrote:
I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1. I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
Are you a developer? IF so try asking in the developer forum.

Iphone 6 plus led light not working in 8.3

I updated to 8.3 a few days ago and have just noticed that my led light does not work.
I backed up the phone, reset it to factory settings and it's still not working. Ay ideas on what I can do next?

Nore wrote:
I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1. I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
Are you a developer? IF so try asking in the developer forum.

Horizontal shifting bars on MBP 15 after disconnecting 24" LED cinema display and waking up from clamshell mode.

I use my MBP 15 (late 2011) with 24" Apple LED Cinema display in a clamshell mode. After disconnecting external display, and opening display, it shows horizontal shifted bars, so it becomes completely unusable. Have to hard reset laptop. Any hints on how to resolve this? Thanks.

Ok, more information for anyone that might care. The wake-up seems to be the familiar dark wake in order to go into hibernate mode. Except now, it's a death wake. Looking at the logs, I see that it happens exactly 70 minutes after sleeping, even though hibernatemode = 0 (which shouldn't hibernate at all!)
So my power settings look like this:
Currently in use:
standbydelay         4200
standby              1
halfdim              1
hibernatefile        /var/vm/sleepimage
darkwakes            0
gpuswitch            2
disksleep            10
sleep                10
autopoweroffdelay    14400
hibernatemode        0
autopoweroff         1
ttyskeepawake        1
displaysleep         2
acwake               0
lidwake              1
standbymode is 70 minutes, what a coincidence. I'm going to try setting it to 0 and see what that does.

I had a trial version, and tonight I bought it. But buttons led me to the Windows version which I accidentally bought. I have Mac. What do I do? How do I switch it over to a Mac version?

I had a trial version, and tonight I bought it. But buttons led me to the Windows version which I accidentally bought. I have a Mac. What do I do? How do I switch to Mac version?

Hi scarabs55,
Are you working with Acrobat or Photosohp? (You mention both PDF files and photos, so it's not clear.)
Let us know what software you're thinking about upgrading and we can point you in the right direction.
Best,
Sara

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

A536 notificati​on led

Similar Messages

Maybe you are looking for

A536 notification led