A55M-P33 FM1 Board Error codes?

I just bought an A55M-P33 Board with an AMD A4-Series A4-3400 APU. Got it all put together and when i turn it on all the fans and everything turns on for a second then powers down and leaves my power/reset switch blinking. Any help or thoughts would be appreciated.

See . . . Now that is a Nice FRIENDLY answer. I realize im new here but i think a little leeway is due.
Quote from: flobelix on 10-March-13, 21:42:19
Follow >>Posting Guide<<
^That just seemed a little abrupt n rude.
And Thank You Svet for letting me know what i needed but i already got an RMA so I will leave you in peace now.

Similar Messages

Logic board: error code 2ROM/1/2:0X12 i try to reinstall tiger for our G5

Need help:
logic board error: error code 2Rom/1/2:0x12 while doing the hardware test for G5 before reinstalling Tiger.
please need help
thanks.

Craig-
AHT isn't always dead on this is true.
Just out of curiosity, what are your symptoms? I am guessing that the start-up drive doesn't work if you put it into the 2nd bay?
Luck-
-DaddyPaycheck

Board Error Codes

Is there a location where MSI lists their error codes for mobos, My new build works normally but flashes 9C, 84, 99 and A2 before booting.

There is no "error", it's the steps the boot process goes through. These are only relevant if booting won't continue at a point. The codes are universal for American Megatrends (AMI) BIOS and UEFI solutions and not an MSI special.
9C - USB Detect
84 - OEM DXE initialization codes
99 - Super IO Initialization
A2 - IDE Detect

Z77a-gd65 gaming board error code

Hi i have a gd65 gaming board and i have the debug code of 35 come up all the time code 35= Early cpu initialization, i have swaped cpu's and ram still tell's me same code.
I have checked for bent pin's can't see any have flash to up to date bios still same code, i try to go to MSI Online Product Registration Center and all i get when i try to make a account is php error's.
Any one help me at all.
My pc spec's are
i7 3770k
z77a-gd65 gaming
msi gtx760 gaming
8 gb corsair pro ram
corsair hx 650 psu
intel 560 ssd

i have just removed the cpu and checked the pins cant see any bent at all blow some air to clean any crap out.
I have emailed MSI to see if i can get a rma i hope they can fix it cause i had a z68 -gd55 board last loved it so i love this board more .

Logic board error code?

while running the extended tests on the Hardware Test cd, the logic board test coughed up this error:
scc /1/5
anyone know what it means?
thanks,
G4 Gigabit Ethernet 1.2GHz (Sonnet Encore/ST), 768 MB/120 GB Mac OS X (10.4.3)

As I recollect SCC refers to Serial Communications Controller. Probably something slightly flaky with the USB Phy.

A55M-P33 no video

Greetings,
old MB died and replaced with A55M-P33. put everything back together, no video and not a sound from that little speaker.
tried all the following, but no lucks...
tried to tap into BIOS
tried to resetted the BIOS
tried outside the case
Please help before i exchange for another board.
System is as follows:
CPU - AMD A6-3600 SERIES - AD3650WNZ436GX
MB - MSI A55M-P33 FM1, BIOS - unknown, serial # - 601-7786-020B1308100xxx
RAM - 4GB (2x4GB) PC3-10666
PS - Corsair CX600w

If board is not defective it supports A6-3600 out of the box.
Quote
RAM - 4GB (2x4GB) PC3-10666
Something isn't correct. Is it 2x2GB =4GB or 2x4GB = 8GB. In any case try with just one stick.
Were all components now in use already used before with the mainboard that died? If so how did you figure out just the old MB had been bad?

G61 428 1.5 years old out of the blue freezes and shuts down. Now on start-up I get error code 00A.

Now on startup I get the 00A error code, this is mother board error code. ESC on startup does not give me a menu.
I also have messages that Product name , configuration, serial number and product number is missing. The note book however continues to work so far, except windows says it is not genuine anymore.

Rapport has to go. It's not compatible with Safari.
Uninstalling Rapport on Mac OS X | Trusteer
One of Trusteer's rep's posted on this thread > Trusteer's Rapport Software: Apple Support Communities
I hope you can get it straightened out soon!

A55M-P33 Motherboard / CPU Compatibility

Hello,
I went to the CPU Support to see if the CPU was going to work with the motherboard. Nothing came up under the motherboard so I would like to ask here to see if it is compatible.
I'm wondering if this CPU will work with this motherboard:
CPU: AMD A4-Series AD3400OJHXBOX A4-3400 APU - Socket FM1, Radeon HD 6410D, 65W, 2700, 32nm SOI, D2/D3 FCH, 1024 L2 Cache, DirectX 11
Motherboard: MSI A55M-P33 FM1 AMD A55 Motherboard - MicroATX, Socket FM1, AMD A55 Chipset, 1600MHz DDR3, 6x SATA II Ports, LAN, USB 2.0, RAID
Thank you for any info you can provide.
Matt

Quote from: flobelix on 08-May-14, 01:35:30
A4-3400 is supported. It is also very well listed in the cpu support table:
Thank you. When I did it last night, it wouldn't come up.

Error code post/16/64?

I've been having recurring problems with my G4.
Symptoms:
2nd internal hard drive warning such as prompting an error message of 'you must initialize, ignore, eject' then I re-boot, other times a prohibit sign, spinning rainbows, kernel panics. It's a mess.
This only happens on start up after shutting down for the night. But I think I've made things worse
I ran suggested back-ups, PRAM resets, ran cocktail, tried disk utility from start up, ran disk warrior from start up, it found some file errors, cleaned them up. Cloned my system using Superduper, backed the hd up on a NewerTech.
Next day, start up issues again.
I ran memtest, and that found nothing. Start up from install disc, ran disk utility, everything's passing, SMART status is verified.
But it is still not operating correctly. I still have start up issues.
This has been going on for at least a week.
I ran AHT twice. The first time all tests passed. I didn't believe it.
So I ran it again and I received the following:
error detection at the logic board:
error code: scc_/1/5 (I think this is a non-apple board warning)
error code: post/16/64.
What?
My internal HD (original) is running at 85% (60g)
My second internal is 120g partitioned with mostly back-ups (not the only back up) and documents.
Thank you to all the folks who've generously posted in the past and thank you in advance for the one that catches this.
-M
G4, gigadesign 1.2, 1.25 ram, radeon 9800 pro Mac OS X (10.3.9) originally QS 933

The POST/16/64 points to an error on your processor board, bad cache memory. I had this same error, still have the processor on a shelf actually, and it took me months to find the code translation.
Apple says for a POST/16/xx error
1. replace processor board
2. replace main logic board
I don't know if there is a heat issue that causes this, but, several cases that I have heard of had systems that ran very hot.
A fellow in Singapore mentioned that he had the same error and believes that the heat causes the external cache chips on the 7455 processor board to loosen(I think your Gigadesigns is a 7447 based chip). He stated that he heated his chips and resolved the error:
"The cache are DDR type samsung BGA chips. This is most difficult as both sits directly opp each other. The only way I think is to heat the chip on 1 side below 220degC(removal at 350degC and soldering in at 300degC). Best if you can get a heater blower and blow at the small gap bet chip and processor board, very tiny clearance, less than 1mm. You can give it a try for the time being, on the chip itself though not the most ideal."
If there are other numbers at the end, ie POST/16/xx yyyy then it is likely a RAM problem or RAM slot problem
1. reseat DIMMs
2. replace DIMMS
3. replace main logic board
Hope this helps, I ended up replacing my processor and as I stated before still have the originalon a shelf. I may try the heat trick one day though.
QS 2002 Dual 1GHz, FW800 Dual 1.25GHz, iBook 1.33GHz, G5 2003 Dual 2GHz Mac OS X (10.4.8)

PowerMac G5 Error Codes?

Thanks In advance to everyone. I have a Late 2005 G5 Dual 1.8Ghz 6gigs of Ram, Lacie firewire 400 Pci card, internal 4 port sata Card, ATI XT800 MAc video card running tiger(10.4.11). I noticed the Machine acting very sluggish the other day, My first thought was the Memory maybe there are some bad DIMMS, After a restarted things where ok again. Right Away ran memtest, came up with no issues(I know it did'nt test all the memory) But I thought this was a good start. But so far been ok. I then ran hardware test twice at 5Min and 30 sec error Code on Logic Board (Error code 2PFW/3.10: FW) This Looks Like a FireWire Error I think but Im thinking this a memory problem, Some bad Dimms. Does anyone know what this error code is? Thanks for Looking

That is inded a Logic Board Error to do with Firewire, do all your ports work?
Have you tried it without FW devices hooked up?
Tried Resetting Cuda/PMU on Power Mac G5, Power Mac G4, Power Macintosh G3...
http://support.apple.com/kb/HT1939

A55M-P33 - No Video, Nost POST Codes

Hey there,
I'm having an issue with the board listed in the subject - I can't seem to get video working. Here are my complete specs:
MSI A55M-P33
AMD A8 3870k APU
GSkill DDR3 1600 F3-12800CL9D-8GBXL
The numbers on the BIOS chip: 25032BVSIG 1229
Not sure what's going on - it also has issues when I plug in an external PCI graphics card (a working Radeon x850). When I remove the RAM, I receive 3 beeps upon powering on, letting me know the memory is bad. It exhibits the same behavior with a different 500W PSU, and after re-seating the CPU.
I think the problem may be related to RAM, but the 16GB variant of the RAM I have in the machine has been tested and is listed as OK on MSI's site - so it should work. I'm going to try to find some other RAM sticks to throw in there tomorrow, but would appreciate any advice anyone can offer!
Also, how does one update the BIOS when there is no video output?
Thanks in advance for any help you may be able to provide!

Yes, I agree that it's a cheap PSU. But, it was pulled from a working system and has enough power to easily handle this system. I also have a 500W Apevia PSU which shows the same issue, which I believe is due to the motherboard not working properly as I've tested the RAM in other machines and it is fine.
This is a budget board, and is cheaper than the 8GB of RAM I want to put into it - I'm not going to purchase a new PSU and new RAM just to SEE if that resolves the issue. It would be cheaper for me to just purchase a board by Asus, Gigabyte, ASRock, etc., than to buy all the parts to test this budget motherboard.
I purchased this board just over a year ago (the 15th of September, 2012) and just now unboxed and mounted it, so it may be out of the manufacturer's warranty. I guess I'm just stuck with a subpar project that I can either spend a lot of money on, or I can choose one of the more reputable motherboard manufacturer's that don't have ridiculous RAM limitations (no GSKill even though it's listed under the 'supported' section. Really?) and don't point out your other, working hardware as the faulty part.
Do you have any suggestions to help me get this board working, besides replacing every other component?
Thanks for your advice!

Board giving error codes for RAM

I have a Z87-GD65 GAMING board. I am having an issue with running the RAM in DUAL channel. It will running OK with each stick individually installed, but not together. Error codes I'm getting are a 10, followed by 19, and then 55. With just one stick, code is A0. My RAM is Corsair Vengeance Pro Series Red 8GB (2x4GB) DDR3 1600 MHZ (PC3 12800) Desktop Memory CMY8GX3M2A1600C9R.
This is on the very first boot after everything was installed. no BIOS changes were made.
Any help would be appreciated.

Quote
I didn't have a chance to look at socket. But, I did notice that the 1st two dimm slots don't work, but 3 and 4 do.
Classic bent CPU socket pin(s) scenario.
Quote
I hear that the LGA 1150 socket pins aren't really easy to bend. I placed the CPU in and clammed down. There wasn't really anything I could have done to mess it up. I'm pretty positive of that.
Unfortunately, not true at all. They are very fragile. A CPU cooler mounted uneven or that has incorrect torque will also cause this behavior.

Logic board has an error code running A.H.T.

I ran AHT 2.0.1 on my MDD Dual 1.25 OS10.4.11
It said the logic board had an error code.
2PFW/2/3:Firewire
The test stopped.
I this serious?
What should I do?
Shamus

Firewire external DVD & HD work fine for me in 10.4.11. Never tried target disk mode.
Anyway, if AHT found an error with your firewire port, I'd say you have a hardware problem with the firewire port not a software problem.   If you have lived with it this long, you can live with it a while longer.
I guess the question it how do you skip the firewire hardware test???   I do not know. Anyone know?
Robert

Digital I/O board 9478 error code 65548 overcurrent report by channel

Hi All,
We are investigating overcurrent on digital outputs. This project is using the Scan Engine instead of FPGA.
Reading one of the hardware shared variables gives the error code 65548 - One or more channels are in overcurrent or overvoltage protection mode.
If we used FPGA would we be able to determine which channel is in overcurrent?
Thanks,
Paul

Hello Paul,
Yes, it can. You can use Module I/O Method and it will indicate if the module runs into overcurrent or not. The previous like is for the 9269, but it also works for the 9478. Remember that if you are using LabVIEW 2012, you won’t be able to create a method by right clicking on the I/O variable because of a known bug. A workaround for this is to open the example “NI 9269 Status Methods.lvproj” and add your target. Then you can right click on the method » Select Item » select your module.
Regards,
Daniel REDS
RF Systems Engineer
Help us grow.
If a post solves your question, mark it as The Solution.
If a post helps, give Kudos to it.

Fm2-a55m-p33 driver problem? Game LoL looks bad

Hello,
I'm a newbie in all this hardware, but i have a new computer with a fm2-a55m-p33 motherboard and a AMD A6 processor running Windows 7 64bit.
Normally this board has on bord video. And everything looks fine, but when i play the game LoL the graphics looks horrible.. some textures are missing etc..
When i look in het device manager, i see that the Display Adapter shows "ATI Radeon HD 7840M".
I have no video card installed, so its only the motherboard and a processor and ram. Is it normal that the display adapter shows radeon hd?
I have tried uninstalling the graphic drivers, and installed the new drivers from MSI website. But it seems there are 2 different drivers:
"AMD Chipset Driver" from 3 weeks ago
"ATI System Drivers for Axx Series" from end 2012
When i install "ATI System Drivers for Axx Series" the device manager shows "standard vga adapter"
when i install "AMD Chipset Driver" i get the ATI Radeon 7840M adapter. Specially the M (stands for Mobile?) makes me think..
I see the latest VGA and RAID drivers are for Richland support, but i have no clue what that is
The shop i got this computer from installed it, so they probably installed the latest Richland drivers showing the Radeon 7840M
So to recap:
What does the display adapter in device manager should show when using the on board vga?
So what drivers do i need?
And are these latest drivers causing the graphic problem in LoL, or how to fix it (main problem)?
Thank you

the board has no onboard GPU so its using the mobile GPU core that's integrated into your AMD A-6 Processor so it will show what the APU has!
as for drivers i would suggest you use the AMD Catylist graphics drivers!
Richland is the code name for the AMD FX 6xxx skew processors like the A-10 6800K. but as yours is showing a 7840M then that is a codename Trinity APU which is a last gen one!
as for the graphics errors i would suspect that it doesn't like your current Graphics Driver but that's just a guess! <--- try the Catylist Drivers from AMD and see if it corrects the problem!

A55M-P33 FM1 Board Error codes?

Similar Messages

Maybe you are looking for