A64 Overclocking info from a bios engineer.

Im sure many of you know who Oskar Wu is. For those who dont, he is a bios engineer that recently left Abit and went to work at DFI. As far as I know he is working on their 250gb board.
Oskar has posted some information regarding overclocking limitations of the NF3 chipset, and a complete table of memory dividers for the a64. The posts were very informative, so I thought many of you would like to read them.
Appearently the sata issue is an nf3 chipset issue, not something which can or should be fixed by MSI. The same issue is said to occur on the DFI 250gb.
He also explains the source of cold boot problems for people with extreme htt overclocks.
Last he posted a complete table of memory dividers and another with max possible memory speeds corresponding to the dividers.
Good food for thought.
Some of this info I discovered myself, but his post still made me get off my ass and do some experimenting on my K8n.
Complete a64 memory divider table
Nforce 3 chipset overclocking issues

Yes i want one please

Similar Messages

!!!!!I CAN'T OVERCLOCK MY CPU. BIOS DOESN'T RECOGNIZE MY AMD ATHLON XP-MOBILE

My configuration is this:
Mainboard: MSI K7N2-DELTA2-FSR
CPU: AMD Athlon XP-Mobile 2500+ 1855MHZ
Video Card: CAPTIVA Nvidia 6600GT 128MB 128bit
Hard disk: Internal Maxtor DiamonMax 10 300GB S-ATA 16MB Buffer
Audio Card: Sound Blaster Audigy Live 5.1 24bit
Power Supply: 400WATT
DVD drive: LG 16X
SO I OVERCLOCK MY CPU UNTIL 3200+ (2200mhz), AND IF I WANT TO OVERCLOCK MORE DURING "POST", BIOS DOESN'T RECOGNIZE THE NEW VALUE (ES: FSB 200 / X11.5 = 2300mhz . DOESN'T RECOGNIZE).
PLEASE HELP ME OR CAN YOU TELL ME HOW CAN I RESOLVE THIS PROBLEM???
THANKS A LOT. BYE

Quote from: Grayone on 06-February-06, 00:55:59
Please furnish us some more info concerning the memory you are using and power output of the 3.3v - 5v -12v rails of your power supply along with the name of its manufacturer.
Some mobile cpus start up with a lower multiplier and then go to the bios to use the preset settings in the bios. If the cpu can't start with the bios settings, it remains at its start up values. Your mobile may not be able to run at a multiplier of 11.5 with a 200fsb. Drop its fsb back to 166 (stock fsb 133) and see if you can run it at its rated multiplier of 14. That will equal 2324mhz.
Overclocking is finding a balance between the fsb and the multiplier that allows you to get the most stable speed out of the cpu.
You also have not mentioned what vcore voltage that you are using or the temps.
The memory that I'm using are : V-Data 512x2 MB DDR CL 2,5
The power supply is 400watt chassis, 3,3V, 12V, 5V.
I tell you that with the mainboard ASUS I did't have this problem with the multiplier because I put 11.5 x 200Fsb.
Thanks of all.MSI DriversMSI Drivers

Debug/trace info from .c program.....

Is there a way to capture debug info from a c file that was executed by teststand (dll adapter)? To be more clear....I have a dll that has a lot print to screen statements all over the place. I would like to be able to see those prints in somekind of trace or debug window while teststand is running.

Hello Gregg,
I assumed you are using printf commands in your code. As far as I know, if you are printing to the screen I don't think you can get it from TestStand. However, there are a couple of options.
1. you may modify your code and write to a file intead of screen and read this file in a separate module that will be running in parallel to your sequence.
2. you may create a panel in the CVI DLL and update your messages to a control. Also you may need to have an additional function in your DLL to be called to display the panel
3. you may pass the sequence context to your DLL function and write the text messages to TestStand Variables and create additional functions to read and display this variables.
4. You can use message boxes in your CVI
code instead of printing to the screen
Regards,
Roberto Piacentini
National Instruments
Applications Engineer
www.ni.com/support

How do i delete my credit card info from my phone. because it wont let me update or download apps because i only have 50 cents on the card

how do i delete my credit card info from my phone. because every time i try to update or download apps it wont let me because i only have 50 cents on my card. so i need help now before i smash this ****** *** phone and go with a galaxy s5

This does not make much sense.
Please explain.
Are you getting an error message? What does it say?

Can I transfer info from one macbook to another by using a firewire cable?

Can I transfer info from one mac to another by using a firewire cable?

You can boot the computer that you would like to get the file from into target disk mode.
This document will help you.
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8443.html

How can i remove credit card info from apple id?

How can i remove credit crad info from my apple id?

I tried to enter it as "none" but it didnt work. It keeps saying i need a card number and all that. But then, i clicked "same as shipping information" and just entered my name and all the adress stuff, put my credit card number as 0 and my security code as 0, put in a random date and clicked save.
-Just a tip for anyone else who couldnt figure it out like me

How to access a Portal User Info from a J2EE application?

Hi,
I have deployed a j2ee application in portal and its running fine.
from that application i need to assign some roles to some users.i have the user id.
so my doubt is can i access the portal user info from this j2ee application?i have some servlets in the j2ee application....can i get the portal user info from this servlet?
plz help me
regards,
Visweswar

Hi,
Please check out this to get the portal user information from Java -
WdClientUser class/Interface to aciehve this.
Please check out these links on the same -
WDClientUser.getClientUser IUser
help needed
Regards
Lekha

How do I get info from Active Directory and use it in my web-applications?

I borrowed a nice piece of code for JNDI hits against Active Directory from this website: http://www.sbfsbo.com/mike/JndiTutorial/
I have altered it and am trying to use it to retrieve info from our Active Directory Server.
I altered it to point to my domain, and I want to retrieve a person's full name(CN), e-mail address and their work location.
I've looked at lots of examples, I've tried lots of things, but I'm really missing something. I'm new to Java, new to JNDI, new to LDAP, new to AD and new to Tomcat. Any help would be so appreciated.
Thanks,
To show you the code, and the error message, I've changed the actual names I used for connection.
What am I not coding right? I get an error message like this:
javax.naming.NameNotFoundException[LDAP error code 32 - 0000208D: nameErr DSID:03101c9 problem 2001 (no Object), data 0,best match of DC=mycomp, DC=isd, remaining name dc=mycomp, dc=isd
[code]
import java.util.Hashtable;
import java.util.Enumeration;
import javax.naming.*;
import javax.naming.directory.*;
public class JNDISearch2 {
// initial context implementation
public static String INITCTX = "com.sun.jndi.ldap.LdapCtxFactory";
public static String MY_HOST = "ldap://99.999.9.9:389/dc=mycomp,dc=isd";
public static String MGR_DN = "CN=connectionID,OU=CO,dc=mycomp,dc=isd";
public static String MGR_PW = "connectionPassword";
public static String MY_SEARCHBASE = "dc=mycomp,dc=isd";
public static String MY_FILTER =
"(&(objectClass=user)(sAMAccountName=usersignonname))";
// Specify which attributes we are looking for
public static String MY_ATTRS[] =
{ "cn", "telephoneNumber", "postalAddress", "mail" };
public static void main(String args[]) {
try { //----------------------------------------------------------
// Binding
// Hashtable for environmental information
Hashtable env = new Hashtable();
// Specify which class to use for our JNDI Provider
env.put(Context.INITIAL_CONTEXT_FACTORY, INITCTX);
// Specify the host and port to use for directory service
env.put(Context.PROVIDER_URL, MY_HOST);
// Security Information
env.put(Context.SECURITY_AUTHENTICATION, "simple");
env.put(Context.SECURITY_PRINCIPAL, MGR_DN);
env.put(Context.SECURITY_CREDENTIALS, MGR_PW);
// Get a reference toa directory context
DirContext ctx = new InitialDirContext(env);
// Begin search
// Specify the scope of the search
SearchControls constraints = new SearchControls();
constraints.setSearchScope(SearchControls.SUBTREE_SCOPE);
// Perform the actual search
// We give it a searchbase, a filter and the constraints
// containing the scope of the search
NamingEnumeration results = ctx.search(MY_SEARCHBASE, MY_FILTER, constraints);
// Now step through the search results
while (results != null && results.hasMore()) {
SearchResult sr = (SearchResult) results.next();
String dn = sr.getName() + ", " + MY_SEARCHBASE;
System.out.println("Distinguished Name is " + dn);
// Code for displaying attribute list
Attributes ar = ctx.getAttributes(dn, MY_ATTRS);
if (ar == null)
// Has no attributes
System.out.println("Entry " + dn);
System.out.println(" has none of the specified attributes\n");
else // Has some attributes
// Determine the attributes in this record.
for (int i = 0; i < MY_ATTRS.length; i++) {
Attribute attr = ar.get(MY_ATTRS);
if (attr != null) {
System.out.println(MY_ATTRS[i] + ":");
// Gather all values for the specified attribute.
for (Enumeration vals = attr.getAll(); vals.hasMoreElements();) {
System.out.println("\t" + vals.nextElement());
// System.out.println ("\n");
// End search
} // end try
catch (Exception e) {
e.printStackTrace();
System.exit(1);
My JNDIRealm in Tomcat which actually does the initial authentication looks like this:(again, for security purposes, I've changed the access names and passwords, etc.)
<Realm className="org.apache.catalina.realm.JNDIRealm" debug="99"
connectionURL="ldap://99.999.9.9:389"
connectionName="CN=connectionId,OU=CO,dc=mycomp,dc=isd"
connectionPassword="connectionPassword"
referrals="follow"
userBase="dc=mycomp,dc=isd"
userSearch="(&(sAMAccountName={0})(objectClass=user))"
userSubtree="true"
roleBase="dc=mycomp, dc=isd"
roleSearch="(uniqueMember={0})"
rolename="cn"
/>
I'd be so grateful for any help.
Any suggestions about using the data from Active directory in web-application.
Thanks.
R.Vaughn

By this time you probably have already solved this, but I think the problem is that the Search Base is relative to the attachment point specified with the PROVIDER_URL. Since you already specified "DC=mycomp,DC=isd" in that location, you merely want to set the search base to "". The error message is trying to tell you that it could only find half of the "DC=mycomp, DC=isd, DC=mycomp, DC=isd" that you specified for the search base.
Hope that helps someone.
Ken Gartner
Quadrasis, Inc (We Unify Security, www -dot- quadrasis -dot- com)

How do i migrate info from apple 2.26 13″ (Mid-2009) to new macbook pro 13

What is best way to migrate all info from apple 2.26 13″ (Mid-2009) to new 2.3 13" macbook pro Core i5?

It seems the best way is to use the "Set Up Assistant" on the first initial boot of your new machine with a Firewire connection. It will prompt you for transfering from your old Mac.
I've never had an issue with this method.

I no longer have a credit card and it wont let me update my apps how do i erase credit info from iphone

i no longer have a credit card and it wont let me update my apps how do i erase credit info from iphone

Hello there, NayNay32.
The following Knowledge Base article offers up some great infomation in regards to changing your payment information in iTunes:
iTunes Store: Changing your payment information
http://support.apple.com/kb/ht1918
There is also a link to see what to do if you do not have the None option or cant select it:
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/TS5366
If your issue still persists, then:
Get help
If you need help changing your payment information, contact iTunes Store support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I recently purchased a new PC. I had backed-up my old computer on Carbonite, so I was able to transfer my iTunes library to the new computer when I downloaded my info from Carbonite. Is there a way to restore my playlists?

I recently purchased a new PC. I had backed-up my old computer on Carbonite, so I was able to transfer my iTunes library to the new computer when I downloaded my info from Carbonite, but the playlists are gone. Is there a way to restore my playlists?
Most of my playlists are on my iPod. If I use my iPod to transfer, will the songs double in my library? Also, how do I do this?
Thank you for any & all info you can provide!
Julie

If you had backed up and restored your library properly you should have ended up with the playlists too. Did you import the media folder from the backup drive into a new library rather than restoring the entire iTunes folder?
See also Recover your iTunes library from your iPod or iOS device.
tt2

Unable to Retrieve Contact Info from synch server - Gator wrote to try renaming file but I can't manage to find the pathway on my Win 7 computer for that file! got as far as my name under user but can't get to application data. Can someone help?

Hi, going crazy. Can't get this fixed. Unable to retrieve contact info from synch server. I did re-do synch using one time only replace I-phone info from "contacts" on computer and tried synching after that - no use same error!
I saw someone by name of Gator wrote pathways to follow in windows but got only as far as user (yes, selected my name as user as opposed to public) then clicked it open but lost after that - can't get to appdata for the next step.... any help or ideas would be soooooo appreciated. I'm so tired of this issue. thanks!
Pinina in Phoenix, Az

Hi, going crazy. Can't get this fixed. Unable to retrieve contact info from synch server. I did re-do synch using one time only replace I-phone info from "contacts" on computer and tried synching after that - no use same error!
I saw someone by name of Gator wrote pathways to follow in windows but got only as far as user (yes, selected my name as user as opposed to public) then clicked it open but lost after that - can't get to appdata for the next step.... any help or ideas would be soooooo appreciated. I'm so tired of this issue. thanks!
Pinina in Phoenix, Az

How to pull multiple lines of info from a table for a Specific Company/Address

What I would like to do is have one Table that I enter all my information on in Numbers for incoming rent like the one below. Since I have 8 spaces to rent I will have up to 96 plus rows of information to look at. But I would like to have Numbers then on separate pages is have the individual Companies have their own rent break down on a table with the Date Recieved and the amount they payed. From there on their separate page I can have the Late Charges come into play or whatever I choose.
Date
Company
Address
Rent Recieved
Jan 1, 2011
X
430
$1,100.00
Jan 3, 2011
Y
440
$1,200.00
Jan 5, 2011
Z
450
$1,300.00
Feb 1, 2011
Y
440
$1,200.00
Feb 3, 2011
X
430
$1,100.00
Feb 8, 2011
Z
450
$1,300.00
Mar 1, 2011
Z
450
$1,300.00
Mar 2, 2011
X
430
$1,100.00
Mar 5, 2011
Y
440
$1,200.00
The following table would be on the separate page with the formula (I do not know how to write) grabbing the info from the above table.
Company X Rent Recieved
Date
Rent Recieved
From the formula that one of you gracious smart people provide I could create a table for each of the Companies that rent from me on their own Tables on separate Tabs.
I know I could go to each individual Tab and write it in but I will be primarily working on my iPad and this would make it easier. I can also utilize the fresh Tables to do other calculations.

I got a soluce with no swap.
I created a new column (E)
In E2, the formula is :
=B&IF(ISBLANK(A),"",MONTH(A))
Apply Fill Down
In table of each company, I inserted a 2nd header row so that I may store the name of the company in A1.
In A3, the formula is :
=IFERROR(OFFSET(Tableau 1 :: $A$1,MATCH($A$1&ROW()-2,Tableau 1 :: $E,0)-1,0),"")
in B3, the formula is :
=IFERROR(OFFSET(Tableau 1 :: $D$1,MATCH($A$1&ROW()-2,Tableau 1 :: $E,0)-1,0),"")
Select A3:B3 then Fill Down.
That's all folks !
Yvan KOENIG (VALLAURIS, France) jeudi 19 mai 2011 17:18:32
Please :
Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Was unable to load data class info from sync services. try again later.

Since installing the latest version of itunes (11.1.5.5) whenever I have either mine or my wife's iphones (4 and 5c, both with the latest 7.1.1) turned on and I start iTunes, I receive the error message saying that itunes was unable to load data class info from sync services. try again later.
If I leave the phones turned off and open iTunes, I am able to sync my old ipod so it appears to be an issue with the software on the phones?
I'm just not sure where to start. I've made sure that itunes has the latest version and no more updates are available.
Thanks in advance,
jamey8420

this is on a windows 7 machine, btw.

When I connect my iphone4s to itunes on my laptop I get this error...itunes was unable to load data class info from sync serv

When I connect my iphone4s to itunes on my laptop I get this error...itunes was unable to load data class info from sync serv

In the course of your troubleshooting to date, have you worked through the following document?
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

A64 Overclocking info from a bios engineer.

Similar Messages

Maybe you are looking for