A65-S159 - I can't use the CD Recovery because my CD/DVD doesn't work properly

Hi, I need help to reinstall the system and drives. It's a Satellite A65-S159. The CD/DVD doesn't work properly. Rarely, the CD/DVD can read a DVD. So I can't use the CD Recovery. What may I do?
Thank you,
Cabula, Brazil

There are two ways to run the recovery DVD, one is from Windows. Instead power ont he computer with the disk in the drive. And imediatly after powering on start pressing the F12 key. After a few seconds you should see a boot device menu that you can select the CD/DVD drive to boot from. Try that and let us know if you got the boot menu, and if the disk worked.
This signature left intentionally blank.

Similar Messages

Can,t use window 7 Recovery disk my CD/DVD player not working

my HP Pavilion Dv4-2045dx notebook crashed, forcing me to buy a new hard drive. but now my CD/DVD
player just starts stops Buzzes than stops, with out loading the disk.. how can i reload my window 7
recovery with out a CD/DVD player ? or is there some way to fix the CD/DVD?
This question was solved.
View Solution.

Hi,
Here's one option you could try as it will give a good indication whether there is a hardware problem with the optical drive itself.
Create a bootable Ubuntu CD
The Ubuntu CD you create should run as you boot the notebook ( as should your Recovery Discs ) , so if this will not run, the problem is almost certainly a Hardware issue with the DVD drive or the sata controller.
On another PC, follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if your noteboo will run this OS from the CD. The 'try it' option does not need to install on the Hard Drive, it just runs from the CD.
http://www.ubuntu.com/desktop/get-ubuntu/download
Let me know if this will run.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

In my numeric key pad I can not use the (.) dot because it has a (,) and it is not working in calculations. What I can do?

In my numeric key pad I can not use the decimal dot (.) because it has a (,) and this not work with decimal calculations. What I can do? Help ………

IT NOT WORK IN MEXICO. THANKS A LOT. BEST REGARDS. MANUEL LOPEZ
El 6/2/2015, a las 16:50, Apple Support Communities Updates <[email protected]> escribió:
You received a reply
SGIII has replied to your question. You can view the full discussion in Apple Support Communities.
In my numeric key pad I can not use the (.) dot because it has a (,) and it is not working in calculations. What I can do?
Correct Answer Helpful Answer
Use the buttons above to tell SGIII and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to SGIII, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

Safari won't start after showing an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.

Since yesterday evening (19-01-2015) safari won't start. After clicking the safari application it shows an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.
This message almost directly disappears whereupon the Problem Report opens. I've tried to find a solution on the web but without succes.
I'm running OS X Yosemite version 10.10.1 and Safari version 8.0.2 on a:
MacBook Pro (Retina 13-inch, Mid 2014)
Processor 3 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel Iris 1536 MB
Since I updated to Yosemite I've been having multiple problems. I already read a clean install will solve most of them. But till then I would love safari to work again.
Thanks!

There is no need to download anything to solve this problem.
If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Daughter has used iPad for her Apple account and I can't use the App store because her username automatically shows up in the Apple ID window. How do I change that?

My daughter has used our iPad for her Apple account and now I can't use the App store because her username automatically shows up in the Apple ID window. How do I change that so I can put our Apple ID in with the appropriate Password?

Open Settings -> Store
Tap on the Apple ID shown and sign out. Then sign in with your own Apple ID.
Update: Oops, AnaMusic was faster...

HT4101 My iPad is tellin me I can not use the camera connector because it uses too much power..... ***

My iPad is tellin me I can not use the camera connector because it uses too much power..... ***

I'm having same problems. If I connect my blackberry it says it uses too much power. If I take sd card out of phone and connect that way I get the same message. The leaflet with the connector says go to Apple.com/support/iPad to find list of compatible cameras.......... I'm still trawling the site to find any such list! Just need to know if it will work with a blackberry ..... If not I've got to take it back. Have been advised by a friend to cut my losses get my money back and use Bump to transfer my pics. I don't own a traditional camera because my phone has a great one. Really don't want to have to carry a camera about with me! They don't make it easy do they!

Installing a d2 quadra but can't use the setup assistant because PowerPC Applications are no longer supported. Help...

I'm tring to install a d2 quadra external drive but can't use the setup assistant because "PowerPC Applications are no longer supported". Anyone have any ideas?

You shouldn't need to install anything just to use the drive. Just connect it to your Mac and it should mount. If it's the Intego Backup Assistant you're trying to install, try the latest version which you can download here:
http://www.lacie.com/products/product.htm?id=10323
Regards.

The error that I am getting is this "Time Machine can't use the disk image because it can't be written to." Any ideas on the fix for this?

The error that I am getting is this "Time Machine can't use the disk image because it can't be written to." Any ideas on the fix for this? When I go to the Time Capsule my Macbook Pro shows that it is locked, I think I did something wrong, but can't figure how to unlock it to see if that fixes it.

As far as we know, Time Machine cannot write to a disk image. It needs to write directly to the Time Capsule disk.

Time Machine can't use the disk image because it can't be written to.

Time Machine can't use the disk image because it can't be written to. help!

VictorSMiller wrote:
I just started getting the same message. I'm using a Western Digital My Book 3TB disk. Normally I have the backups done with the disk attached to Airport Extreme.
I hate to have to tell you this, but backing-up that way is unreliable and not supported by Apple. See: Using Time Machine with an Airport Extreme Air Disk.
Backup failed with error: The target disk image volume is read-only.
Most likely, you got this message before all this started:
What that doesn't explicity say is, the backups failed the verification. When that happens, Time Machine marks the sparse bundle as damaged and won't back up to it anymore (even if Repair Disk can't find the problem). See #C13 in Time Machine - Troubleshooting for details.

The middle button on my iphone 4 doesn't work properly what can I do about it?

the middle button on my iphone 4 doesn't work properly what can I do about it?

Make an appointment with the genius and bring to the Apple Store.

Can I use the Superdrive to do a Multisession DVD

For some reason I cannot get Apple to give me a clear answer about the super drive in my MBP. CAN I USE THE SUPERDRIVE TO DO MULTIPLE SESSIONS ON A DVD!!! Sorry I'm yelling but they cannot hear me. The Super Drive is a DVD+RW which means you can do multiple session or so I thought. They keep telling me that I can but they dont really seem to know for sure, weird huh? So Can I use a DVD to do multisessions with the MBP?

Oh here is what the Disk Utility help file says, this is why I am stumped
Recording on a recordable disc more than once
Normally, you can burn items to a recordable disc, such as a CD-R, CD-RW, or DVD-RW, only one time. However, if you use Disk Utility to burn the disc, you can burn items to a disk in more than one session as long as space is available. This is also called multisession burning.
1. In Disk Utility, create a disk image that contains the files you want to burn to the disc.
The files must be from a volume with a Mac OS Extended disk format. To check a volume's disk format, select the disk in Disk Utility and look at the information at the bottom of the Disk Utility window.
2. Select the disk image in the Disk Utility list and choose Images > Burn.
3. Select the "Leave disc appendable" checkbox. If you don't see this option, click the triangle in the top-right corner.
4. Insert a blank recordable disc in the optical drive, and click Burn.
To add more files to the disc later, follow the steps above. You can continue this process until all available space on the disc is used.
See also
burning discs

Can I use the HP Recovery partition after formatting and repartitioning the rest of the hard drive?

I recently had my HP Pavilion dv4 2145dx laptop (Windows 7 64-bit) go kerput. The Geek Squad said that the motherboard died. I've purchased another laptop, and I'm using that one for now, and I am using the hard drive from the old dv4 as an external.
I'm planning to keep using the hard drive from the old dv4 as an external for now, but I'd like to be able to fix the dv4 at some point in the future. Here's the problem: to get the most out of the old dv4's drive as an external, I'd like to repartition it so that there is one NTFS partition and one HFS+ partition. That way I could use it easily with both my Mac and Windows machines.
But if I do that, I'm not sure if the HP Recovery image would still work. If it didn't work, then if/when I get the old dv4 a new motherboard, I couldn't restore the OS from the Recovery partition. This is a problem, because I didn't create Recovery Disks (stupid, I know - I'm definitely making them for the new machine).
So I'd like to do one of these two things:
1) Create my dv4 Recovery Disks. Can I do this if the dv4's drive is mounted in an external enclosure?
2) Format and partition the dv4 drive (leaving the Recovery partition intact), and later recover the system from the Recovery partition. Would the Recovery partition still work under those conditions?
Thanks for any help anyone's got.
This question was solved.
View Solution.

Hi:
Anything you do to the C:\drive will render the recovery partition inoperable.
You won't be able to create a set of recovery disks unless the drive is operable in the notebook.
Can you still read all 25 characters of your W7 product key on the bottom of your busted notebook?
If so, you can do this...
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Or use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB method of compilation.
http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Or, you can probably still order a set of recovery disks for your notebook from HP.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&tmp_task=solveCategory&cc=us&dlc=en&lan...
Paul

Can I use the same recovery discs to restore Windows on multiple same model laptops?

Sir me & my brother have HP dv6 pavilion 3210us same model with preinstalled win7 Home Premium unfortunately my brothers laptop HDD change in to dynamic we can't boot to original system restore.But i have recovery media dvd seperate for my laptop can i use it for my brothers laptop to recover please help me to find out the solution

Since the laptops are the same model-yes, you can use your Recovery Discs on both.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Can I use the small 3" 2.6 GB DVD+R DL Disc in the MacBook Pro?

Well we have some vacation footage from a Sony Handycam that is on a 3" 2.6 GB DVD+R DL disc. Can I feed this in my MacBook Pro Optical drive without it getting stuck in there? Will it read? I'm wanting to edit the footage in iMovie HD if it will work.

No. You can only use standard sized discs in the optical drive.

Can't use the DPS Tools because I need to update but can't do that...

I want to use the Indesign dps tools but when I try to make a folio my Indesign Folio builer says that I need to update my InDesign in order to use it.
But when I look in the creative cloud app and under 'help' in Indesign it says that my progam seems to be up to date...
So it says that it needs an update of Indesign but I cannot execute an update.
Does anyone have the same problem or knows how to solve it?
Thanks in advance!
Nick Meeuws

I'm not sure what causes this problem. I haven't been able to reproduce it, but I've seen it before. You might want to try creating a new account with admin rights and installing InDesign and DPS using that account. I'll ask around to see if anyone has a better solution.

A65-S159 - I can't use the CD Recovery because my CD/DVD doesn't work properly

Similar Messages

Maybe you are looking for