A665-S6070 shuts down after memory upgrade. Help please!

This is a critical problem that needs to be addressed by Toshiba. 
When looking through the forum, they are quite a few threads exactly like this.
1.  upgrade from 4gb to 8gb
2.  everything  good, except resume from "suspend".    (hibernate works fine also)
3.  when resuming from "suspend" ,    fan speeds up for 2 secs -- and hard shutdown.
There clearly is an issue with the Toshiba laptop(s) when upgrading 4GB to 8GB.
Windows MemTest shows the memory is okay.  
Also, all of my applications are blazing fast now with the Kingston memory module upgrade KTT1066D3/4G
Again, the only issue is when trying to resume from suspend.  

Cheers R2........ suppose at this stage i could start rhyming off a load of star wars lines but uve probably hears them all before.......
N e way......... checked out the link u posted..........very useful......
The module described is identical to what i have.............As with previous reply ( above ) im not sure what to do.........might take up Offteks offer of replacing the module but slightly concerned it might have same outcome......Still not happy bout opening the cover so much........nut needs must i suppose

Similar Messages

  • Satellite A100 shuts down after memory upgrade

    Consider me as 1 of the thickie bunch.. Not even sure wot im talkin bout but here goes n e way...........
    Have a Satellite A100 570 ( PSAA2E)..........
    Have tried several different online sites lookin for memory upgrade. Didn't have the witt to use toshiba site...... Ended up going with Crucial.........
    Ran diagnostic on laptop and was sent the module a needed.or so i thought....... wrong 1 or 1s as i bought 2 x 1G modules in order to " double up".....
    Got my money back as they were not compatable with my system.. something to do with density problems....
    Tried company called OFFTEK........ they seemed to know what they were talkin about....... I have from Offtek. at present a..........
    200 Pin 1.8v DDR2 PC2-4200 SoDimm....... but Toshiba have recommended below......
    1GB PC2-4300 DDR2 Memory (533MHz)
    Part Number: PA3411U-2M1G
    1024MB (1GB) Memory PC2-4300 DDR2 (533MHz)
    Theres an obvious difference ...... 4200 and 4300. But im not sure if its a significant difference........... or what it means
    Have updated bios to most recent version and basically updated everything toshiba had to offer for this model...........
    Ran EVEREST and it recognises the 1G module but when i take out the original 512mb module the laptop starts for about 3 seconds then shuts down...
    this repeats about 5 times then complete shutdown.....
    I dont like opening the back cover too often but this is the 3rd module ....
    Not sure whats meant to happen if the module is working...i.e start up message..not sure if windows recognises 1G module....
    Would it be safer bet to send Offtek module and stick with toshiba option.....
    Thanks in advance.....

    Cheers R2........ suppose at this stage i could start rhyming off a load of star wars lines but uve probably hears them all before.......
    N e way......... checked out the link u posted..........very useful......
    The module described is identical to what i have.............As with previous reply ( above ) im not sure what to do.........might take up Offteks offer of replacing the module but slightly concerned it might have same outcome......Still not happy bout opening the cover so much........nut needs must i suppose

  • Laptop shuts down after sleep mode, help please!

    When I close the lid or press the sleep mode button, my laptop goes into sleep mode and everything is ok. However, when I open the lid or press the power button to awake it... after a few seconds, my laptop shuts down! I just formatted my laptop to the factory settings hoping to fix the issue, but it persists. Please help!

    When any problem persists after recovering to factory settings, it's often indicative of a hardware problem.
    Please contact support at (800) 457-7777.
    - Peter

  • Why it takes long time to shut down after i upgrade to OS X ver 10.8.2?

    why it takes long time to shut down after i upgrade to OS X ver 10.8.2?

    Can't really say, but I see this occurring on all of my Macs since the 10.8.2 update and keep reading about it at several other Mac user boards.
    Bottom line: it's a general problem, but more of an inconvenience, than a serious problem. Probably will be solved with the next update.

  • HT4623 My iPhone 4S keeps shutting down after I upgraded to iOS7

    My iPhone 4S keeps shutting down after I upgraded to iOS7

    This has happend twice to me in the past 12 hours since I just updated to iOS 7.0.2, but did not happen after I updated to iOS 7
    Last night the operating system crashed to the Apple symbol (a reset) when browsing the settings menu.
    Perhaps it's a bug with the movement tracking? Seems to be connected with sudden movements (I noticed it shut off when I quickly lifted the phone up to look at the screen) - perhaps the background parallax is glitching the system to a software reset? If my problem persists I may temproarily disable the parallax to see if that mitigates the resets.
    To be clear, the update to iOS 7 didn't precipitate this problem, and I updated to iOS & on the day of its release (9/18).
    This used to happen to me sporadically on my iphone 4s on iOS6, usually when my battery was anywhere at 40% to 5% - though I suspect that was because I was due to re-set the battery by completely draining it.
    Is anyone else having this issue with their iPhone 4S?
    I'm using a Verizon iPhone 4s 64 GB, still in excellent condition.

  • Mac shuts down after 5 minutes  Help!!!!

    My computer: imac G3, DV Special Edition, 500Mhz, 384 mb ram, 80 gig hard drive
    This is an odd one...like many others before me the computer just died one day. it would not start up, no sounds, just dead. A few minutes later I tried to turn it on and it came on, but 5 minutes later, it died.
    This is the strange part. I took the plug from the socket and waited a few minutes, then pluged the computer back up. It came on. But only for a few mintes and again shut off.
    This time I left the plug in the socket, waited a few minutes and tried again. Nothing.
    I then took the plug out waited about 30 minutes and it came back on for about 5 minutes and shut down. It only seems to come on if I let the computer sit idle with the plug out.
    I have noticed that the computer does not keep time properly.
    What I have done.
    1. I have pressed the Cuda Button, and yes it did start up, but only for about 5 minutes.
    2. I have tried to reinstall the system hardware, but the computer dies before completion.
    Should I replace the battery? What else can be done?
    Help!

    I have the same problem. I don't have good news, though. I have replaced the battery, pressed the reset button, even replaced the power supply board (not the video board -- which is the only thing I have decided I'm not willing to do). My computer usually shuts down after 5 minutes, but will sometimes stay working fine for a couple of hours. I managed to update the firmware and OS to the very latest, but still it dies. Mine will also occasionally flicker and freeze, which can be restarted by holding down the power button.
    I would replace the video board, except the people trying that don't have quite the same problem (theirs don't start up at all), and there is no source I've found that would have new boards, so you would get a bad board, or the same problem eventually. Some people point to a transformer on the video board, but again the symtoms are not quite the same (they smell burt electronics or hear a hissing/crackling sound before it dies.
    I have just packed mine away and I'm working on a new G5, but I sure hope the old iMac can be fixed so my kids can use it. I just didn't want you to have to go down the same road just to find nothing helped. Good luck, and if you have any new ideas, I would be glad to hear them.

  • When running on battery power, my MBP shuts down after 30 mins..please help

    this has been happening for the last two weeks; whenever i run my MBP on battery, it goes blank/shuts down after about 30 mins...would start back on, but shut down even before the login screen comes! i checked the battery display under the laptop-it showed 3 green lights!! TIA!! i bought my MBP off the apple website last september!

    With your symptoms, most likely, yes. If you have a 17" MBP, you are out of spec (based on Apple's specification of 80% health for 300 cycles). If you have a 15" MBP, you're in spec (84% health), but your symptoms indicate a problem (i.e. a defective battery). So, contact AppleCare!
    You can't calibrate now. I asked because if a battery goes too long (150-220 cycles) without calibration, the "sudden loss of power" can result.
    Hope this helps...
    Graham, that's why I inquired about calibration, but with the OP's cycle count, that's not the issue. Also, FYI the "battery condition" information is part of System Profiler with Leopard; the OP lists Tiger, and did post all the information available under Tiger.

  • IPhoto automatically shuts down after attempted upgrade

    I have the latest version of iPhoto, but when I try to open it, I get the following message:
    The photo library needs to be upgraded to work with this version of iPhoto.
    Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete.
    When I hit "upgrade," it just shuts down. No upgrade. No iPhoto.
    Anything I can do?

    As a test dpress and hold the option key while launching iPhoto and create a new test library - import a few photos into this test library and report back with the results of this test
    LN

  • Elitebook 9470m shuts down after Ram Upgrade

    Hey guys
    I bought 2 Kingston 8GB Ram for my HP Elitebook Folio 9470m (Windows 8 Pro) to upgrade it from 8GB to 16GB. According to Kingstons' "Memory Search" the RAM I bought should work with my laptop:
    8GB Module - DDR3 1600MHz
    Artikelnummer: KTH-X3C/8G
    Herst.-Artikelnummer: 689374-001; B4U40AA; H2P65AA
    Techn. Daten: DDR3, 1600MHz, Non-ECC, CL11, 1.5V, Unbuffered, SODIMM, 204-pin
    I installed the two Kingston Rams and removed the one from HP because I read that the ram should be from the same brand.
    After the proper installation of the two Rams the Laptop shuts down during startup or the repair modus comes up with no result. 
    If I install the HP Ram and one Kingston Ram, everything works fine, but i can't install both Kingston rams without the mentioned problem. Why?? :-)
    Thanks in advance for your help guys!
    This question was solved.
    View Solution.

    Yes it should work. I checked the Kingston site and this memory is specifically recommended for your model. I would try each Kingston module separately with the HP module and run a memtest extended test on it.
    http://memtest86.com/download.htm
    Make a bootable cd or usb stick with memtest and run it on each module. I suspect you got a bad stick of RAM. At the least if it does not work Kingston is very reputable and they will refund your money.  Here is the memory suggested by Crucial:
    http://www.crucial.com/search/searchresults.aspx?keywords=Elitebook%209470m
    If this is the Answer you need, please click Accept as Solution so that others can find it down the road.

  • Server 2012 X64 R2 DNS Server keeps shutting down after inplace upgrade from Server 2012 X64

    Hi,
    ever since upgrading from Server 2012 X64 to Server 2012 R2 X64 my dns server keeps shutting down every several minutes before having to do a restart.  When viewing the event log this is all I see..
    The DNS Server service terminated unexpectedly.  It has done this 497 time(s).  The following corrective action will be taken in 60000 milliseconds: Restart the service.
    if I look in the Application Error Log,  I will also find the following:
    Faulting application name: dns.exe, version: 6.3.9600.17031, time stamp: 0x530871fb
    Faulting module name: dns.exe, version: 6.3.9600.17031, time stamp: 0x530871fb
    Exception code: 0xc0000005
    Fault offset: 0x000000000010b0e0
    Faulting process id: 0x1740
    Faulting application start time: 0x01cf531b2e3a7f5e
    Faulting application path: C:\Windows\system32\dns.exe
    Faulting module path: C:\Windows\system32\dns.exe
    Report Id: 90a4ab37-bf0e-11e3-9446-003048df3f03
    Faulting package full name:
    Faulting package-relative application ID:
    I have tried removing and then reinstalling the DNS Server role, but the same situation occurs..
    thanks,

    Hi,
    I'm going crazy,  I've upgraded my Server 2012 Standard to Server 2012 R2 Standard and now my DNS server keeps crashing since the in place upgrade.  I have finally narrowed it down to it only crashes after several minutes if I load the data from
    a file instead of the registry.  As a test I:
    -1- killed all my dns data,
    -2- uninstalled the dns server role
    -3- deleted the /windows/system32/dns directory
    -4- reinstalled the DNS server role
    -5- used the wizard to create a DNS server and a forward zone.
    everything works okay, no crashes,  then I change the advanced propertied of the DNS server to load from file, restart the DNS server and once again it crashes every 2 minutes..
    Please help,  this is killing me..
    thanks in advance..

  • IMac randomly shuts down after Leopard Upgrade

    My wife's iMac randomly shuts down since we installed Leopard. It wasn't doing this before the Leopard upgrade.
    It takes about 5 mins. of inactivity after the machine enters sleep mode, then it shuts down. We've searched the Discussions but have yet to see an answer to our question. Nothing but an iSight is plugged in to the machine. Any suggestions?

    Same problem with random shut downs that get more and more frequent making the computer unusable. Took to Apple Store where they did not recognise the problem - tried replacing RAM then power cable then power supply. Said problem was fixed but started to recur within a short time of using it back home. Used install discs to reinstall the original operating system (Mac OS X 10.5.2) and the problem resolved - on upgrading to Mac OS X 10.5.8 the problem immediately recurred. Have gone back to 10.5.2 now and all seems okay.
    Seems strange that there are so many postings about this and Apple Store (Genius staffseem to be unaware of it as a problem).
    Kim56
    iMac 8.1

  • IPad freezing and shutting down after OS7 upgrade

    Does anyone else have an issue with the iPad suddenly shutting down.  I'm  finding that since the O.S. 7 update my iPad often freezes, is slow to open apps, and will often shut down to the apple icon screen ( like you're doing a full reboot).  I'm also having issues deleting video and it's not like I have my iPad is full.  If anyone has any ideas or tips that would be great.

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.

  • Flash shuts down after start up screen - please help

    I had a strange problem develop yesterday. Whenever I start
    Flash 8 the start up screen shows for a moment, then disappears and
    the program shuts down and never starts. I ran Ad-Aware, Spybot,
    HijackThis and even did a file search by date to see if anything
    appeared on my computer that would cause this but I found nothing.
    I have Flash MX installed as well and it was doing the same thing
    when I tried that. I repair/installed Flash 8 - didn't work, then
    uninstalled Flash 8 and installed again and it's still doing the
    same thing. I suppose I could uninstall MX too and try again but I
    suspect that's not the problem. Any thoughts?

    Your capacitors are leaking, this is a known issue with Rev A G5 iMacs, and they should be replaced, along with the logic board. Take it in and if t stays up long enough, try to clone it to an external drive to save your data. I use SuperDuper! to do this.
    Let us know how you make out,

  • IBook g4 keeps shutting down without warning! Help please!

    Hi everyone,
    The problem in brief (as I'm scared the laptops gonna shut down again and I'd have to restart)
    - I just upgraded my Tiger to Leopard
    - Everything WAS running smoothly for approx. 4 hours, then as I was playing around with iTunes, the mac shutdown
    - I had to restart it but as soon as I logged in, I was told "My Time and Date is set to a date before 1970", and that I was not connected to the Wireless.
    - Just as I was connecting to the wireless, it shut down again.
    -Once again I turned it on, and the same messages appeared. This time I managed to open safari before it shutdown again.
    - I took out the battery, and used the AC power, but it shutdown as well.
    - The battery, which was shown as fully charged 10 minutes ago, now on the lowest green light out of the 5 green lights situated at the back of the battery pack : s
    So right now I'm running on AC power without a battery, paranoid it's gonna shutdown again without warning. Does anybody know what's wrong?
    Your help will be much appreciated
    Thanks.
    Dakota.

    Hi,
    Welcome to the Discussions.
    It sounds like a bad battery. Try putting the battery in while it's running on the adapter then launch Apple System Profiler (Apple Menu>About this Mac>More info) and click on battery. See what its capacity is compared to the absolute capacity (4400). If it's 50% or less you need a new battery.
    John

  • Macbook Shuts Down Very Very Slowly - Help please :(

    Hi, my Macbook (Snow Leopard) has been able to shut down very quickly since I purchased Snow Leopard. However, just a few days back, it started to shut down very very slowly, often "lagging" or being "stuck" at a blue page before it actually switches itself off. I checked Console & thought these messages could probably be the reason why. But then again, I deleted iAntiVirus and such messages continue to appear.
    Can anyone help please? Thanks
    1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus * set a breakpoint in mallocerrorbreak to debug
    1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus iavd(236,0xb0081000) malloc: * error for object 0x12d09b0: pointer being freed was not allocated
    1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus * set a breakpoint in mallocerrorbreak to debug
    1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus iavd(236,0xb0081000) malloc: * error for object 0x12d09d0: pointer being freed was not allocated
    1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus * set a breakpoint in mallocerrorbreak to debug
    1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus iavd(236,0xb0081000) malloc: * error for object 0x12d0740: pointer being freed was not allocated
    1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus * set a breakpoint in mallocerrorbreak to debug
    1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus iavd(236,0xb0081000) malloc: * error for object 0x12d0a60: pointer being freed was not allocated
    1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus * set a breakpoint in mallocerrorbreak to debug
    1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus iavd(236,0xb0081000) malloc: * error for object 0x12d09f0: pointer being freed was not allocated
    1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus * set a breakpoint in mallocerrorbreak to debug
    1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus iavd(236,0xb0081000) malloc: * error for object 0x12d0b90: pointer being freed was not allocated
    1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus * set a breakpoint in mallocerrorbreak to debug
    1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus iavd(236,0xb0081000) malloc: * error for object 0x12d0c70: pointer being freed was not allocated
    1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus * set a breakpoint in mallocerrorbreak to debug
    1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus iavd(236,0xb0081000) malloc: * error for object 0x12d0d00: pointer being freed was not allocated

    Hi,
    I removed it already, though I am not sure whether or not some parts of it might be around.

Maybe you are looking for