A700: PS3 Won't Work in HDMI Mode

When I connect my PS3 to my A700 using an HDMI cable, there is no picture or sound. I know the PS3 works, because it works fine when I hook it up to the A700 using AV cables, and I know the HDMI cable works, because I can use it to connect my laptop to the A700. I have changed the settings on my PS3 to HDMI, so I know that's not the problem. Any suggestions would be greatly appreciated.

Hey,
I have had the same issue for the past few days, I think the problem lies with the hdmi input on the a700. I've used several different cables and I've finally managed to get a connection to my ps3 by simply moving the cable around slightly at the back of the a700, taking it out and firmly holding it in until an image appears.
The port seems to be very temperamental, if I move it in any way when using the ps3 then the screen goes black and everything's lost again. This may only be my a700 but my problem was exactly the same as yours, it may be an issue with all a700s.
Hope this helps!

Similar Messages

WRT54G v4 won't work in PPPoE mode...

WRT54G v4 won't work in PPPoE mode...
For the past few years, I've had my WRT54G v4 set up to run in PPPoE mode. My Siemens Speedstream 5200 is set to run in Bridge Mode. It's worked fine for a long time. If I ever ran into a problem, I could always simply reset both, re-do all the settings, and it'd be fine.
Today I come home from work, it's not working at all. I reset the settings, redo everything, still not working. I do this a few times. It repeatedly just won't connect to anything. The DSL modem activity lights are flashing, everything is normal, the Status page in my Linksys setup all reads fine (it's connecting through the modem like it should, acquiring an IP address, etc). So, I decide I'm gonna reset the modem and try bypassing the Linksys.
That turns out to work just fine.
So I reset the Linksys, hook my PC back up to the Linksys, and everything is fine. But here's the rub...
If I try to bridge the modem and put the Linksys in PPPoE mode, it simply stops working. If I put it back into DHCP mode and reset the DSL modem, it still won't work. Once it enters PPPoE mode, the Linksys simply stops working as it should. Nothing besides a reset will make it start working.
Any suggestions/explanations as to what would cause this? I'm completely baffled, personally. I'm running the DSL modem in it's normal state and the Linksys in DHCP but I really prefer it the other way. I just can't figure out why it isn't working.
So, to sum up:
1. Connection is fine when going straight through the DSL modem.
2. Connection is fine when routed through the Linksys into the DSL modem with the Linksys in DHCP mode.
3. Once DSL modem is set to Bridge Mode and Linksys to PPPoE, I lose internet connectivity. No DNS, nothing.
4. Even if I change the settings back to DHCP, it still will not work. I must manually reset the router's settings using the reset button, doing the same with the DSL modem.
Any suggestions? I've tried everything I can possibly think of.

You need to Upgrade the Router's firmware in order to get the connection work again with PPPoE...
Download 2.95 MB...Once the Firmware has been downloaded you need to unzip the firmware file, it will unzip 3 files, you need the .bin file...
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

Remote Desktop Shortcuts won't work in FULLSCREEN mode

Hello,
I found lots of
shortcuts won’t work during remote desktop connection between Win7 64 host (home premium) to Win 7 64 guest (professional):
Include:
ALP+PAGE UP/PAGE DOWN
CTRL + ALT + ±
In order to make them work I need to exit full screen mode of remote desktop first (can be done with CTRL+ALT+BREAK)
Is there any fix?
Bob

Hi，
Have you check the "Local Resources" under Remote Desktop Connection "properties",? just as screen shot below:
You can also test this issue with On-screen keyboard, check if issue persists.
Yolanda Zhu
TechNet Community Support

My MacBook Pro (Latest, Retina, Mountain Lion, 10.8.2) won't work with HDMI..!?!!!?!?!

I usually connect my MacBook Pro to my TV through a HDMI cable, I never have to change any settings or anything, I just turn on my TV, plug in the HDMI cable to my MacBook and my TV, and it does the rest itself. But I tried to do this yesterday, and my computers screen just went blue, then briefly flashing my original screen before going completely dark. I can then only see an enlarged cursor, and it slowly, veeeeeery slowly, peices together my screen (NOTE: it is doing this on my TV AND on my MacBook, so I can't see anything on either screen for ages unless I remove the HDMI cable) it took 40mins to peice together about 1/3 of the screen, and even then, it was insanely glitchy, I could hardly press anything... How can I fix this? Keeping in mind that I cannot see my screen while the HDMI cable is in... And I know for a fact that it is not a problem with either the TV or the HDMI cable because it had no trouble connecting my other Windows laptop to it... Someone please help!!!

This is just one of the glitches you'll find in Apple Mac OS X. One day something works and the next, or a few hours later, it doesn't. There doesn't seem to be any rhyme or reason for it. It just happens.
About the only way to fix it is to Reinstall, at least that is what I have found I've had to do in some circumstances.

External Display won't work in clamshell mode

Hi - I can't get my external display to work with the MacBook in clamshell mode - It works fine with the lid open.
I'm using it with the apple bluetooth keyboard and mouse.
I've obviously changed a setting without realising - can anyone help.
Thank You.
Ash
MacBook Pro (15-inch, Mid 2010)
Mac OS X 10.6.8

Sorry - I've now got it to work.
I don't know how - I just went through all the settings one by one, switched them off and back on again and it now works - I have to assume it is 'user error' but I can't work out which bit

Siri won't work in data mode

siri does not respond in data mode. I have tried resetting, restarting, turning siri on/off, data mode on/off. Siri is not available in data mode. My carrier is AT&T.

What do you mean "data mode?" Do you mean you are on AT&T's network as opposed to Wi-Fi? Does it work on Wi-Fi?

IE10 won't work in desktop mode

So I'm using an HP laptop. OS is Windows 8. I use Internet Explorer 10, and the IE app on the Windows 8 home screen works. But when using desktop mode, IE doesn't work. When I click on the IE tab, a window comes up but it never loads. I tried a couple
of things like restarting my computer, clicking out and back into IE, disabling add-ons, using the troubleshooter to detect problems in IE performance (no issues detected), and nothing worked. So I've been using the Windows 8 app version of
IE, but I prefer to just use it through desktop mode. Does anyone have any idea of what is wrong and how to resolve the issue?
Thanks in advance.

starting IE in the NoHome state and then getting out of it.
What did you see then? It should have opened a res://ieframe.dll/NavCancl.htm page.
You could run ProcMon to see what is going on. It would be best to have two traces of this scenario, one working and whatever it is that you are getting. Typically your case is found to be something else that you have forgotten about that would
be interfering. Broken Family Safety is one example but I also saw it caused by the Java updater, so it could be just about anything. Using the suggested diagnostic should keep your traces as compact as possible.
You could also try simulating the same scenario in a safe mode boot. Unfortunately we cannot use ProcMon in that environment but you could at least use SysInternalSuite's AutoRuns to compare what is being loaded in each case.
Good luck
Robert Aldwinckle

Wi-fi won't work in Flight mode

Hi everyone - was wondering if anyone here could help me. I'm planning on taking my iphone overseas without roaming and just using wifi for skype and messaging (ping, whatsapp etc.). However, when I put my phone in flight mode, even though it's connected to wifi, as evidenced by the symbol at the top of the screen, it fails to connect to any web page or receive my email and 'whatsapp' even goes on to say that I don;t have a valid internet connection.
I'm not sure what it could be...help would be much appreciated!

I'm planning on taking my iphone overseas without roaming and just using wifi for skype and messaging
Just put in a SIM card you can buy in the destination country and put it in iPhone. Calls are then cheap.

Quicktime won't work in 64Bit mode

Hi,
i have following problem: The Quicktime-plugin does not show any Quicktime movies when i start Safari in 64Bit. It only does when i switch to 32Bit.
I'm using Safari 5 - SnowLeopard 10.6.3 - latest Quicktimeplayer - Intel Core 2 Duo/MacBook
Any ideas? Quicktime is running well in gChrome...
Thanks for reading.

Sry. It's about the QT-Plugin...

Video won't play in preview mode. Any ideas?

Hello everyone.
Wondering if anyone can help me with a little issue I'm having with Final Cut Pro.
For some reason, video playback won't work in preview mode (apple+F12). It just pauses, but the audio plays. I've checked that the Video Playback is set to Digital Cinema and that I select All Frames in External playback, but it still remains looking like a still frame - with the audio. However, the footage plays fine in the canvas window.
Any clues on what the issue could be?
Just so you know, I'm using a Lumix GH3 camera, with no firewire. I have to import the .mst files into iMovie, with USB, and export them into .movs to get them to work in Final Cut. If anyone knows of a much simpler way to do this then that would be a great help.
Could that affect the playback?
Thanks in advance.

there's probably your problem. Although fcp will allow you to import h264 quicktimes, it's not a compatible format. Use compressor to convert to prores422. Post back if you need any further help with this.

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

Hi jenette,
If you are having issues using an HDTV via HDMI as an external display to your MacBook Air, you may find the following article helpful:
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
(Note: You will generally only see the arrangement option in Displays when you are configured to use the external display in Extended Desktop mode; there is no arrangement in Mirroring as both screens are showing the same image.)
Regards,
- Brenden

I forgot my password and am trying to reset my ipod,but it won't work. It says that my ipod is in recovery mode and that I must restore it. I click ok, and then restore, and then restore and update. then it says contacting ipod software update server and

I forgot my password and am trying to reset my ipod, but it won't work.It says that my ipod is in recovery mode and that I must restore it. I click ok, and then click on restore and update. Then it says connecting ipod software update server and a screen pops up with ipod software update on the top and iOS 5.1. It lists a bunch of stuff this update contains and on the bottom it says next, which I click and nothing happens, it just goes back to the ipod restore page. Help, what am I doing wrong?

This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.

Windows Stuck in Safe Mode - mouse won't work - need my data...

New Mac User, well two months of trying to get it to opperate correctly. Unbelievable! I've re-installed XP SP2 too many times to count, finally had it up and thought it was running fine for the last week, then I went over to the Mac OS tried accessing windows through boot camp, it shut down the Mac OS, then when I tried to go back to boot windows directly, I received the damning <windows root> \system32\hal.dll file is missing or corrupt - again.
I've gone through a bunch of posts, tried a number of the instructions, and now have a worse issue, my computer is now stuck in safe mode with Windows, by instructions, here, I'd disabled everything for start up in Configuration Utility and checked start up in safe mode there too, so now I can't get it out of it, and since my mouse and keyboard won't opperate in safe mode, I get to the log in page to select user but the mouse just won't move and pressing "CTRL ALTDLT" no response.
In the Recovery Counsole when I rean CHKDSK /r this is what it came back with...
"The volume appears to contain or or more unrecoverable problems."
97638572 kilobytes total disk space.
90877508 kilobytes are available.
406 bytes in each allocation unit.
24409643 total allocation units on disk.
22719377 allocation units available on disk.
So what does that mean? Not sure what the " volume appears to contain one or more unrecoverable problems" means when it's not telling me what they could possibly be. Thoughts anyone?
If anyone knows or has some good advice on how to get windows back up and running correctly, and without wiping out my data - as I can't get it backed up, I would be tremendously grateful...
2 months of this is really enough, dying to use my system, and praying that I can...
Thanks so much,
Kitti
Message was edited by: Kittikatt
Message was edited by: Kittikatt

Here's what worked: http://support.microsoft.com/kb/330184
I followed the instructions above and once I finished, After re-booting, I selected Microsoft Windows XP Professional and the System Configuration Utility came up.
On the “General” tab, it shows that the Start Up Selection is on “Selective Startup” with everything checked, but what’s marked “Using Modified BOOT.INI
Tried to change it to “Normal Startup – load all device drivers and services” then re-start.
Windows came back up, but so did the System Configuration Utility and still showing that it was starting up with “Selective Startup”
Now just need to figure out how to start it up in “Normal”, if in fact that’s possible. Will keep you posted and if anyone has any further suggestions, that would be much appreciated.
I do hope this will help all the others that have run into the main issue, which I have found is caused by the Parallels Desktop by they way, not Microsoft, and that start having issues by getting the dreaded " hal.dll " file is missing or corrupt on a direct Boot to Windows.
Very long and sleepless night….
Kitti

Updated iTunes to 10.5, iTunes won't work now! Everytime I open iTunes it just freezes and I can't click on anything. It says to take it out of compatibility mode and still doesn't work! any help??

Updated iTunes to 10.5, iTunes won't work now! Everytime I open iTunes it just freezes and I can't click on anything. It says to take it out of compatibility mode and still doesn't work! any help??
Thank you. Nick

Okay, we'll try the technique from the following post. Be sure to be logged in to your usual user account when doing so. (Otherwise you'll be editing the wrong set of HKEY_CURRENT_USER keys.)
Re: How do I turn off the compatibility mode for ITunes.
Does that clear up the compatibility message?

USB 3.0 Hub won't work in 3.0 mode

I have a Portege Z835-P372 and my USB 3.0 Hub (StarTech 2 port hub) won't work in 3.0 mode.
When I purchased the StarTech.com hub, it came with no instructions or CD (with drivers, etc). Their website also has no driversor firmware updates for the hub (As I understand, the hub itself doesn't need any drivers).
When I connected it to my computer the first time it installed it as a Renesas Electronics 2.0 hub. It thus always works only in 2.0 mode.
As I understand I probably need the latest NEC/Renesas drivers and firmware updates, these I have downloaded from the Toshiba driver site, but still no luck.
I did some research and found that the drivers on the Toshiba site are old and there are newer ones out there (but from other sites that I had to register and pay for). Are they available elsewhere?
I did some more research into similar problems people are having out there and there were comments that the Intel USB 3.0 Driver also has to be updated.
Any suggestions?

hey RagingPigeon,
try uninstalling all USB control drivers from your unit and then install this :
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS015025
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

A700: PS3 Won't Work in HDMI Mode

Similar Messages

Maybe you are looking for