A7000 | The images taken from the front facing camera(FFS) (5MP) are mirrored. Is this an issue?

Hello Team,
I just took an image from the FFS off my new A7000 and i noticed that the images are mirrored. Is this a software issue?
I even owned a A6000 but the images from that were proper.
As far as i know mirrored image should be displayed while taking the picture but proper un-mirrored image should be saved.
Please look into this issue.
Here is an image(re-sized) i took from FFS which is reversed/mirrored.
Admin note; picture >100K converted to link. About posting pictures in the forums.

Yes i have updated to the latest firmware S141. And yes i am using the default camera app but still the issue exists. Is this a software issue or is it a hardware issue? If its a software issue, then is it possible to fix through future firmware updates? Anyhow i'll take the phone to nearest service center. Can you give me the address for service center in Bangalore(India). Thank you for the reply.

Similar Messages

How to retrieve the image back from the running CSS

how to retrieve the image back from the running CSS

Gilles,
Thank for your response.
But the version we use is sg0740107s and can not download from the Cisco Web site any more.
Does cisco have a archive site for all the image so that the user can download it?
sctorcss1# sh ver
Version: sg0740107s (07.40.1.07s)
Flash (Locked): 07.20.2.06
Flash (Operational): 07.40.1.03
Type: PRIMARY
Licensed Cmd Set(s): Standard Feature Set

The shutter on my iPad front facing camera won't open. My husband and I are in Ireland and I can't take pictures. Can anyone help? It is the latest iPad version and I am updated with version 6.1.3.

My husband and I are traveling through Ireland and my iPad front facing camera won't work! The shutter won't open. I have shut all programs that might take up memory, I have totally rebooted and I have tried restarting everything. Any advice to help me take amazing pics while on our vacation?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

There is a little red light that appears above my iphone 4 front facing camera/calling speaker. what is this light?

when i use a app on my phone, a little red light appears above the iphone 4's front camera what is this light? and is it supposed to turn on?

https://discussions.apple.com/thread/2805411?start=0&tstart=0
Check that out. It seems to be the same thing

Downloading images/videos from the phone - again.....

Hi
I had setup nokia pc suite to download images to an USB drive which is dead now.
luckily I have not deleted the images/videos from the phone yet.
I want to re-download everything from the phone to a new disk, but pc-suite claims
no-new photos/videos in the photos.
how can I RE-DOWNLOAD everything from the phone to my PC?
thanks a bunch
prd
Solved!
Go to Solution.

I found a way:
a) Win XP and PC Suite 7
-> close Nokia Image Store
-> go to the folder C:\Documents and settings\%sername%\Application Data\Nokia\Image Store
-> delete search for a file called TransferLog.xml and delete all results
-> open Nokia Image Store, it will say that you have new pictures and/or videos (it will consider all images an videos as if you connected the phone for the very first time, although the setting for the transfer will remain, so review them also in the wizard)
b) Win Vista and PC Suite 7
-> close Nokia Image Store
-> go to the folder C:\d:\users\%username%\appdata\roaming\Nokia\Image Store
-> delete search for a file called TransferLog.xml and delete all results
-> open Nokia Image Store, it will say that you have new pictures and/or videos (it will consider all images an videos as if you connected the phone for the very first time, although the setting for the transfer will remain, so review them also in the wizard)
Note: You may have to enable to see hidden folders and files and to clear the checkbox before the Hide protected operating system files in the folder view settings.
Message Edited by panderson on 02-Mar-2009 09:47 PM

Helix front facing camera problems.

I recieved my frist batch of Helix's last week. We ordered 7
Out of the 7, 2 have bad front facing camera's. I noticed that Lenovo has a new camera driver as part of the Lenovo system update utility. This driver update doesn't correct the issue.
My vendor is swaping me out with new units but I wanted to post this.
When you get your helix check the front facing camera.
Maybe I'm just unlucky with 2 bad out of 7 or maybe Lenovo has a quality control issue?
Solved!
Go to Solution.

@dkNigs and mrlakeside,
This grey picture with the Crossed Camera is the privacy mode of the "Lenovo Settings App". You have to deactivate it in the Settings App under the "Camera" tab.

I would like to create a pop-up window appear from Labview Interface. In this window, I will have a slide control and an image taken from a camera. The main VI have to run while pop-up window is open. How can I do ?

When I pushed a button, this pop-up window has to appear. There will be a slide control and a picture from a camera in this window. Is it possible to make appear this windows while main VI Interface continue to run ? How can I do this ? Thank you for your answers.
Cyril.

Here you go. This is simple example. Maybe not the best way, I am just
beginner in LV and still not comfortable with data flow that much. I prefer
events, so I would change this to use Event Structures.
When you click on OK button on SliderMain, it opens Slider.vi. Now both
windows are open and you can interact with both. Now if you click on OK
again with Slider.vi open, you run into problems. Only thing I did was
change VI properties of slider.vi, mainly window appearance.
vishi
"Cy" wrote in message
news:[email protected]..
> I would like to create a pop-up window appear from Labview Interface.
> In this window, I will have a slide control and an image taken from a
> camera. The main VI hav
e to run while pop-up window is open. How can I
> do ?
>
> When I pushed a button, this pop-up window has to appear. There will
> be a slide control and a picture from a camera in this window. Is it
> possible to make appear this windows while main VI Interface continue
> to run ? How can I do this ? Thank you for your answers.
> Cyril.
[Attachment SliderMain.vi, see below]
[Attachment Slider.vi, see below]
Attachments:
SliderMain.vi ‏16 KB
Slider.vi ‏11 KB

Warranty on the issue of purple spot in images taken from rear camera?

My iPhone 5 have purple spot in images taken from rear camera. I just noticed the issue in my phone today.
I researched online and some people also have the same issue and have their phone replaced in Apple shops.
I don't have any receipt or store warranty card since it was just given to me as a gift in the Philippines last April 2013, I checked the warranty coverage status (https://selfsolve.apple.com/agreementWarrantyDynamic.do) and it still has repair and service coverage.
Im now here in Dubai, and my question is that will Apple Premium Reseller shops here in Dubai honor the said warranty and have my iPhone repaired or replaced?

Im now here in Dubai, and my question is that will Apple Premium Reseller shops here in Dubai honor the said warranty and have my iPhone repaired or replaced?
No.
The warranty for an iPhone purchased from an official source in the Philippines will be honored in the Philippines only.

Is it possible to put the photos on my iPhone 5 onto my MacBook Pro? The photos that I am trying to do this with we're not taken from the phone. They were imported from a computer.

Is it possible to put the photos on my iPhone 5 onto my MacBook Pro? The photos that I am trying to do this with we're not taken from the phone. They were imported from a computer. When I open image capture it only shows the photos that were taken from my phone and not the other ones. Please help. Thanks.

It is not possible to put synched photos on your iPhone from one computer into another.

How secure is the front facing camera?

Is there a way to tell if the front facing camera is on? Since iOS supports multi-tasking. From the security side, is it safe to assume the front camera is always on, unless a tape is covering it?
thanks

When not using the Camera app, it is not on or running in the background. The Camera app is quit when leaving the app just as it was quit with leaving the app prior to iOS4. Just because an app is in the fast app switching and recently used apps bar or dock does not mean the app is running in the background. Very few apps will run in the background when leaving the app such as a music streaming app and a GPS navigation app. Some 3rd party apps will be placed in a suspended state when leaving the app such as with a game. An app in a suspended state is open but not running in the background - it is suspended or frozen not using any processor cycles or battery. Nothing has changed with the Camera app in this regard with iOS4.
http://whenwillapple.com/blog/2010/04/19/iphone-os-4-multitasking-explained-agai n/

I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.

I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.

Just go back in photoshop and use the Slice Select tool, then just click and select the slice and hit delete - if you're not sure which one is the active slice just right click and find the one that has the Delete Slice option.
It's possible you either added the slices by accident or if you received it from someone they just had the slices hidden. For the future, you can go to View > Show > Slices to display (or hide) slices.

My iphone 4 camera shutter won't open. I have already done a restore and I am using the latest iOS. The front facing camera works during FaceTime but crashes when I switch to rear camera. in Camera mode I can't switch to front camera.

My iphone 4 camera shutter won't open. I have already done a restore and I am using the latest iOS. The front facing camera works during FaceTime but crashes when I switch to rear camera. in Camera mode I can't switch to front camera. I plan on replacing this phone with an iphone 5s when it comes out but I need this phone to work until then.

When you did the restore, did you restore from a backup or restore as new? The final step of user troubleshooting is to restore as a new device, not from a backup. If you restore as a new device and the camera still does not function, it is probably a hardware issue. Make an appointment at the Apple Store Genius Bar and have the device checked by a Genius.

The shutter on my Front Facing Camera won't open.

It would open when I had it on the rear facing camera, but it freezes when I click to switch.
And then when I try to open the camera app, the shutter won't open, I'm guessing because it's in front facing mode.
And even when I Skype, the app freezes if I try to use the front facing camera, so I have to use the rear facing camera for skype (which is annoying)
I have the latest software update...
Anyone know how to fix this?!

Same Problem. Have had the iPod 4G since it first came out and everthing fine till now.
To: just after installing IOS 5.0
The camera(s) shutter will be closed for a while, unable to be used.
Also, camera(s) will no longer switch between modes (shoting regular pic vs. shoting self)
As others have mentioned, I also did the common things to try to fix this:
- I closed the Camera app and restart it
- I rebooted the iPad Touch 4G
- I did a hard reset
None of this helped.
This happens on ALL the camera apps I have (four or five).
Which makes me think it's a Bug
Note: I'm posting this on all threads as I become aware of them.
Update: A Partial Fix, I did the 'dramatic,' decision of doing a full Reset/Restore (System>General>Reset) and after that the front shutter now works again, so I can take pics of things in the normal way, but one of my camera apps made it clear it gets an ERROR when trying to switch to the self-photo/Facetime mode, so I'm avoiding doing that to the Apple Camera app.
Since it started for me with a software change, and it got partially fixed with a system Reset I more firmly believe it must be a bug. It looks like a bug. It acts like a bug. It's a bug.
Apple is a good company and if they get the word I'm sure they will do what's necessary to fix this problem. So keep talking it up on Discussions and send Feedback is all we can do and many of us don't have a Genius Store nearby (plus, it can't be good for business to be returning products because of software issues).
On the plus side of the camera and new IOS5:
I found out how to get that cool function to being able to use the camera right away, from the lock screen.
Very nice. And very, very nice to be able to use the volume button to snap pics.

Access to the front-facing camera

Hey guys:
I've downloaded AIR 3.0 and have been anxiously awaiting the front facing camera! Any news on when LCCS will adopt? Or is there a way I can replace the default getCamera() functionality of the publisher? I'm excited after coming back from MAX.
Keep up the good work,
-Eric

Well, I have not yet had a chance to test it, but with AIR 3, you should be
able to use WebCamPublisher.CameraNameIndex to set the camera to the
front-facing one.
You should be able to do something like:
function setupPublisher(publisher:WebcamPublisher):void {
       var camera:Camera;
       var cameraCount:uint = Camera.names.length;
       for ( var i:uint = 0; i < cameraCount; ++i )
          camera = Camera.getCamera( String(i) );
          if ( camera.position == CameraPosition.FRONT )
              publisher.cameraNameIndex = String(i);
(with apologies for the formatting)

Hi,I am new to I pad. Why are the pictures taken from I pad is not as clear

Hi,why are pictures taken on the I pad not as clear? I am new to I pad.tks

Because the camera on iPad was designed to accommodate Facetime. By the numbers, tells you why. The rear facing camera is 1.3 Megapixel. The front facing camera is .7 Megapixel. In contrast, iPhone includes a 5 Megapixel camera and if you haven't looked at point and shoot or DLSR camera's these days, they all start at 10 Megapixel. The reality is, iPad camera was never intended to produce camera quality pictures. In bright light it can take an acceptable picture, but in less than bright light, it is marginal at best.

A7000 | The images taken from the front facing camera(FFS) (5MP) are mirrored. Is this an issue?

Similar Messages

Maybe you are looking for