A720 Install new SSD drive

Hi,
I'm currently try to change my 1TB hard drive to a new 128Go SSD Drive.
I have try with 2 different drive but unfortunately i'm not able to do the upgrade. The first SSD are not visible from the BIOS and the other one I can see it from the bios but when trying to do a clean install... booting from the DVD, after the files seems to be loaded, I came up with a blank screen... the hard drive led on the monitor stay's on (not flashing) and nothing else happen.
Do you know first if it's possible to change the 1TB HD to a sata SSD drive (not mSata) and if the answer is yes... how to do it ?
Thank's
Dominic

hi ferldom,
Thanks for Posting!
Here is a thread of users who installed the SSD.
http://forums.lenovo.com/t5/IdeaCentre-Desktops-Home-Servers/Installing-mSATA-drive-in-IdeaCentre-A7...
Can you try Changing these settings checklist in your BIOS Before you do a new installation.
Some of the settings may not be seen inside your BIOS but for those that's present change it like on this list
Under Exit TAB
OS Optimization
OS Optimized
For the two options above: Should be set as Disabled or Other OS
Under Boot Tab / Start up Tab
Boot Mode Should be set to Legacy
Boot Priority Should be set to Legacy First
UEFI Boot should be set to Disabled
Quick Boot should be Disabled
StartUp device Menu prompt should be Disabled2
Quick Boot Should be Disabled
USB Boot should be Enabled
Secure boot Should be Disabled
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working.

I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working. Adobe Acrobat has been a primary tool for accommodating memory problems after a brain injury. (A car ran me down while I was out getting exercise.) I installed the SSD because I needed my management of PDF files to run faster. I called tech support for help when the software first stopped working, but they needed me to give them a number from my original disks. Because of my disability, I've been having someone come in to clean, and the shelves where I kept my software packages were cleared. I've been hunting for them ever since, but I can't look for them myself for very long at a time. Today I finally found them, but now I can't seem to contact tech support. What happened? I don't want to delete my old files because I need the setup to remain unchanged, because I don't do well with changes. I think all I should need is to have someone located the license file on drive E: and move it to wherever it is needed on the SSD drive, but I don't know what to look for.

Tech support is not normally available on weekends. You should contact them as soon as the weekend passes and pick up where you left off with them.

Approach for fresh OSX install to new SSD drive with restore from TimeMachine

I have an early 2010 MacBook Pro with running Mavericks with FileVault 2 encryption. The drive seems to be failing. I am not able to boot it up. I get a "Prohibitory" sign with freezing. I have attempted various recovery steps: booting with Command-R, running Disk Utility, attempting to do a full restore from TimeMachine, turning off encryption via terminal/command line with no success. I am not able to mount the disk volume. DiskWarrior doesn't seem to support bootable Maverick volumes. I don't the the existing drive deserves additional time.
I've purchased a new SSD drive and I plan to do a fresh OS install on that drive, followed by a restore of my most recentTimeMachine backup to that drive. My backups are not encrypted. Because the current HDD seems to be toast and is running FileVault 2, installing from scratch and then restoring apps and data seems to be the most realistic approach.
Can somebody please tell me what the preferred sequence of steps would be to do this? Particularly the initial OS X install? Since the new drive will not have a recovery partition, I assume that I cannot do Command-R at boot-time to start the install. My system has a DVD drive, but I don't have a Mavericks install disk.
Comments appreciated...

Restart the computer. At the chime press and hold down the OPTION key until the boot manager appears. There should be a disk icon for your Time Machine backup drive. Select it and click on the arrow button below it. This will start you into a hidden Recovery HD on your Time Machine backup drive. Select the Disk Utility option and click on the Continue button.
1. After DU loads select your SSD (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
2. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
3. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
5. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
6. Quit Disk Utility and return to the main menu. Select the Install OS X option and click on the Continue button.
7. Be sure to select your SSD as the installation target.

I have replaced my old hard drive with a new SSD drive. Can I restore a complete Time Machine backup

I have replaced my old hard drive on a MacBook Pro midyear 2010 with a new SSD drive. I have a complete system backup of my old drive in an external hard drive using Time Machine.
Questions that I would like to get answered.
1) Can I connect my external hard drive to the macbook pro and use that to boot up my machine by pressing and holding down the Options key? Once booted up successfully, can I use Disk Utility to format the new SSD and then restore the complete time machine backup?
2) If that is not possible, can I use my old drive which I can connect using a USB adapter and use that to boot up by following the same strategy as listed in Step#1 above?
3) If neither options are possible, do I need to use a bootable USB drive for Mavericks OS X to boot up the machine,
I have Mavericks OS X ( 10.9.6) and I do not have a DVD of the OS.
Any help is appreciated.

Let me first document the steps that did not work and then I will document the steps that worked.
1) Replaced the hard drive with SSD.
2) Connected the original hard drive using a USB adapter to the MacBook to make it behave like an external device.
3) Powered on the machine and on hearing the chime pressed Command-R to start in recovery mode.
4) Chose the Disk Utility option to erase and format the SSD. The format chosen was Mac OS Extended Journaled.
5) Once the formatting was done, then clicked on the "Restore" tab in Disk Utility
6) In the Source field, dragged my original hard drive from the left pane and placed it in the field
7) On the destination field, choose the new SSD drive. Clicked on "Restore". Gave me a warning, accepted the warning and the restore was under way.
8) I had 236 GB to restore so took 3.5 hours before it was done.
9) Disconnected the external hard drive ( my original internal HDD), shut down the machine and powered on again.
10) Heard the chime and after that it was a white screen with no Apple logo.
Was visibly upset and started thinking what my next move will be. Then tried these steps
1) Again powered off the machine.
2) Connected my internal HDD once more as an external drive
3) Powered on and on hearing the chime, pressed Command-R as before
4) Once the OS X utilities screen popped up, this time chose Install OS X
5) Erased the contents of SSD once more and reformatted it using Mac OS Extended Journaled.
6) Installed OS X by following the prompts.
7) Once the OS was installed, I was presented with an option on how to transfer data to this new Mac
8) Chose the option to move the data from my original HDD.
9) Took another 3 hours to move the data.
10) Removed the original HDD once the transfer was complete, powered down the machine and started it once more.
11) Booted successfully and all my content is now accessible on the new SSD.
Moral of the story - It is the spirit that counts.

My late 2012 mac mini boots slow with new ssd drive

So here is the situation. I purchased a 128gb ssd drive, installed it a usb enclosure, formatted it to Mac OS Extended (Journaled), cloned it with carbon copy cloner 3, used the option key during boot up and selected the ssd drive and it booted my mac mini and it functioned perfectly. I than tested it for dozens of reboots and it worked fine. I then took apart my mac mini and removed the original hard drive and installed the new ssd drive. When I boot to the ssd drive it still takes 47 to 53 seconds just like the old drive. Aren't ssd drives supposed to be a lot faster?
My solution or tip is as follows; The reason it takes so long to boot is because the mac mini doesn't know you replaced the old drive and it is looking for it during the boot process. Finally it can't find the drive so it boots to the ssd drive. All you have to do to correct this is click on "system preferences", select and click on "startup disk" and select your ssd drive and click on "restart". After these steps your mac mini will now boot in about 17 seconds. Issues solved.

Yes, my solution fixed the issue. I went from a 47 to 53 second boot time to a 17 second boot time. The ssd drive is significantly faster than the original drive that came with my late 2012 mac-mini. This is my first post and I wasn't sure how to post this as a tip. I have another tip regarding usb 3.0 hubs.

Should I put the new SSD drive in main HDD bay or the Superdrive/Optical bay for a Mid-2010 Macbook Pro?

Hello All,
I'm considering getting a new SSD drive to add on to my Mid-2010 Macbook Pro (13 inches, unibody), and wondering which one of the following two options I should really adapt:
(1) Replace the original OEM hard drive in the main bay with the new SSD drive, and then remove the Superdrive (or the optical CD drive) and to be fitted into an external enclosure for using it externally in the future, and then relocate the original OEM hard drive into the Superdrive position, so both the new SSD (preferably for running the OS and system files) and the old OEM hard drive (for storing media and documents for example) could be used; and
(2) Keep the original OEM hard drive in place in the main drive, and buy a superdrive/optical drive caddy to goes with the new SSD drive, and together place the new SSD drive fitted inside the caddy into the position of the Superdrive/Optical CD drive, and configure the boot preference to be booting from the Superdrive/Optical Drive (which is now the SSD drive with OS and system files);
I've done some researches and some suggested that option (2) is better approach for at least two reason: (a) the MBP main drive come with some sort of shock proof sensor, so placing the original optical hard drive in the main is better than placing it in the super/optical drive where there is NO shock sensing feature provided, and placing SSD in the super/optical drive, one doesn't really have to worry so much about shocks; and (b) as during the process of shutting down the MBP, for optical hard drive, some power will sometimes needed to finally spin down the drive, but if such optical hard drive is place in the superdrive, the power maybe cut off right away when MBP shut down, which may cause issue to the optical hard drive in a long run as it never properly spin it down.
Then the main concern is that, if I adapt option (2) above, placing SSD in the super/optical drive bay and install and running the OS from there, will it decrease the performance (i.e. speed, latency, and etc.) as if i was to put the new SSD in the main drive?
Also, any suggestions with respect to Samsung 840 EVO vs. Samsung 850 EVO (250GB)? any well-rated HD caddy aside from OWC for moving the main HDD to optical CD bay? and perhaps an external enclosure for the Superdrive? Thanks in advance for any comment and/or suggestion.
- Jack

Could you provide some rationale(s) behind it? As far as I know, the mid 2010 Macbook Pro, the HDD is running via the SATA interface at running at 3.0 Gb/s, which is SATA II, and the Super-drive and/or the Optical drive, which is also running via SATA II interface, so I would assume the performance (i.e. primarily in speed) would be similar if not the same by placing the SSD drive in either one of the two places.
Also, wouldn't it be better by placing the SSD in the optical so the OEM HDD could be kept in the original main bay since it has the shock-sensing feature there?

HDD problem after installing new SSD

i bought a Kingstone SSD 60GB, and procced to a clean installation in my HP DV7-1020us laptop wich i love. All nice and good... i got out the HDD, install SSD in previously used HDD slot, install windows 7 on SSD partition, put the HDD in second hard drive bay that was it.
The problem is... after couples shuts down of my laptop (still working good), one time when i started, my laptop spent like 10-15 mins trying to start up the windows , ( i could hear my old HDD working hard) and after that i wanted to reach my HDD but i couldnt... i double click on the partition i want to open and my HDD starts working hard hard and in the end it says that i need to format it so i can acces it. My hdd haves 3 partitions... i runned disk checks and repairs and still doing the same. I finally formated all of it... all of my HDD partitions including the Recovery partition. My HDD works fine until i shut down my laptop for the first time after formating, then another 10-15 mins to start up and shut down the windows. Also if i connect my hdd via USB everything is fine ( if i previously format the HDD and connect it via USB). But if i move it back into my laptop in my sata slot things goes bad again. Also if i wait 10 mins at start up, get the hdd out and connect it via usb it still runs very ver very slow, and one partition asks me for formating. So i'm thinking that my second sata slot connection does something bad to my hdd.
I'm thinking that my second sata slot haves some problems... what should i do? I dont like my HDD working on my USB, it's a laptop, everything has to be integrated.
Oh and if i move my ssd from first sata slot to my second one, it says "please insert bootable device...."
Thank you, if u need more information please ask me

Hi mykey651,
Thank you for your query, I will do my utmost to assist you.
I grasp you have installed a SSD drive as the main drive and the original drive as a secondary. All works well until you reboot and then it is unable to locate the SSD.
Here is a link to HP Notebook Hard Drives & Solid State Drives Identifying, Preventing, Diagnosing and Recovering from...
If that has not helped, I suggest you go out to the bios and restore the defaults. This will reset the system and make it scan for installed hardware. This should help it to find the new SSD as the boot drive.
Here are two more documents that may be of help.
About Solid State Hard Drives
How to Install an SSD (Solid State Drive
Hope this helps and have a great weekend.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

How do I install a SSD drive - the Bios does not allow changing to AHCI mode

I have a Windows 7, HP ENVY approx 1.5 years old. I want to install an SSD drive, however the BIOS seems to be locked, or does not include options to change the SATA connection to AHCI or RAID.
How does one unlock the BIOS, or change the sata settings to allow an SSD drive to be installed?

Hi:
AHCI is enabled by default on today's HP consumer notebooks.
Nothing can be done to actually see a setting, or change the setting to anything other than AHCI etc.
Paul

I have a MAC Pro from 2011 currently running MAC OS 10.9.5. This weekend I cloned the MAC HD drive to a new SSD drive for improved performance. The clone was completed successfully with no errors. After the clone completed I successfull restarted my sy

I have a MAC Pro from 2011 currently running MAC OS 10.9.5. This weekend I cloned the MAC HD drive to a new SSD drive for improved performance. The clone was completed successfully with no errors. After the clone completed I successfully restarted my system using the SSD as the boot device. I then successfully tested all of my products, including Photoshop CS6 and all of its plug-ins. I successfully tested the key features that I frequently use. Today while attempting to launch Photoshop CS6 a message is being displayed indicating that a scratch disk cannot be found. All drives are available on the system via the Finder and Disk Utility. I can access all drives including the old MAC HD which is no longer the boot device. I've even attempted to launch Photoshop from the old device yet the same error persist. Is there a way to review/edit/change Photoshop preferences if Photoshop doesn't launch? I've even restarted my system several times to see if that would resolve the issues. Does anyone have any recommendations for this issue? Have you previously address this issue?
Thank you Gregg Williams

Boilerplate text:
Reset Preferences
http://forums.adobe.com/thread/375776
1) Close the program and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (not reversible)
or
2) Move the Folder. See:
http://www.bugge.com/Family-and-friends/Illy/illy.html
--OB

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

Just installed new hard drive in mac book pro 15", when trying to boot OSX from original disk I still get a folder with a question mark in it. How can I reinstall the OS?

Can't seem to get my mac book to boot from the CD after installing new hard drive.
I keep holding down "c" while restarting the machine with the disk in but it just keeps ejecting the disk and giving me a folder with a question mark.

If your on 10.5 with a Intel Mac, I think Apple has jinxed the firmware so you can't boot from the 10.5 disk anymore.
So far several people, myself included, can't boot from a 10.5 OS X disk on a Intel Mac.
Your going to have to buy a 10.6.3 Snow Leopard retail disk, it's wayyy better than 10.5 anyway, faster and most stable even better than Lion. Have to buy iLife though as it doesn't come on the 10.6.3 retail disks, only free with grey disks.
http://store.apple.com/us/product/MC573Z/A
https://discussions.apple.com/message/16276201#16276201

Do I have to activate AHCI mode on a Mountain Lion after a new SSD drive installation?

Hello All,
Do I have to activate AHCI mode on a Mountain Lion after a new SSD drive installation?
I have a new Corsair GT SSD sata 3 drive on my mack book, I have read on corsair web page that is good tho activate the AHCI and TRIM but I cant find information about how to do this on OS X.
Thank you all

That's information for non-Apple hardware. You can activate TRIM using third-party software: TRIM Enabler 2.2. However, most new SSDs should not need TRIM activated on the Mac.

Bookmarks in version older than 8 - installed new hard drive - where is the bookmarks file?

installed new hard drive two months ago - just now reinstalling Firefox -- installed new version 8 -- need to know where my old bookmarks would be stored (what file and where)

Profile is a folder which store all your personal data in a safe place
* https://support.mozilla.com/en-US/kb/Profiles
* here explain how to backup profile https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
* here explain how to restore it
https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile

Hard drive on my mac died, installed new hard drive. When I try to sync my phone for the first time, will the computer wipe all the songs, photos, ibooks from my phone?

hard drive on my mac died, installed new hard drive. When I try to sync my phone for the first time, will the computer wipe all the songs, photos, ibooks from my phone?

Yes because that information is not located on the hard-drive of your new mac! If it is purchased content from the store, than this issue isn't as bad as it looks!
Here is a link explaining how to get your previously purchased content back:
http://support.apple.com/kb/HT2519
You also want to authorize your Apple ID account on the computer by following these instructions as well:
http://support.apple.com/kb/PH1730
Basically this link explains to go to the top left corner of your screen where you will see file, edit, view etc! Click on Store in that section and click on authorize this computer, also you want to make sure that the computer will not automatically sync by going to iTunes in the top left corner, just to the right of the apple symbol if iTunes is selected, and go to prefrences, and here you will see back up! Right under the back-ups has an option explaining to prevent devices from automatically syncing which is good cause you may be able to transfer your purchases from there which will put your content into the computer, and if that happens than we don't lose anything
Hopefully I was of some help:)

I install new hard drive 500gb and i still have 400gb available but my macbook run very slow getting rainbow all the time on screen

i have install new hard drive 500gb and i still have 400gb available but my macbook run very slow getting rainbow all the time on screen.
need help

First boot into recovery and select Disk Utility>First Aid and repair the disk.
If there is no improvement, perform a Safe Boot:
http://support.apple.com/kb/ht1
If there is an improvement, then third party applications are probably the cause of the problem.
Ciao.

A720 Install new SSD drive

Similar Messages

Maybe you are looking for