A75-209 not seeing CD/dvd drive and laptop loggof few seconds after loggin

Hello everybody,
I got into a " self loggoff after loggin" issue, and I'm not able to restore the computer on any ways. Tried it on Safe Mode with no avail, it appears the window to loggin and after do it after few seconds it starts loggoff the computer.
Tried to reload the software from CD and it doesn't work, actualy BIOS doesn't see it . Any advice, please will be greatly appreciated,
Thanks a lot,
Dan D.

here's a thought-check to see what your Startup disk is. It should be your hard drive, also check your cd/dvd preferences in System preferences. oh-I see you have a MacBook Pro. maybe you will have better luck in the macBook Pro forums, this is for the Desktop machines...
JB

Similar Messages

Y ? i can not see my DVD drive in favorites, on the left side. TQ.

y ? i can not see my DVD drive in favorites, on the left side.
TQ.

On the left side of what, the Finder?
Open Finder Preferences, click on Sidebar and see if CDs & DVDs is selected under devices.

I can't download OS5 or, rather, iTunes does download it about 450 mb and then, a few seconds after it starts processing the file, I get the message that I am timed out and am recommended to check my internet connection. I am using 3g to download it.

I can't download OS5 or, rather, iTunes does download it about 450 mb and then, a few seconds after it starts processing the file, I get the message that I am timed out and am recommended to check my internet connection. I am using 3g to download it.

I don't know which country you're in, but in the US, carriers limit the amount of download for a single file when using 3G. Have you tried wifi?

Bootcamp does not see replacement DVD drive in Mac Pro3,1

Recently purchased LG Super-Multi Drive - Mac Pro Kit 24X 5.25" Internal DVD/CD Writer from OWC and installed it in lower DVD drive according to the manuel provided including wire to Sata plug in Mac Pro3,1. A difference is that Top of 2 DVD ports has a faulty drawer door so I have removed the original Apple DVD device from it.
I now have DVD access/play using LG in Mountain Lion with bottom Drive but none at all in Boot Camped Windows 7 or 8 which do not see the SATA drive in lower drawer.
Wondering if there is any fix for this.

My Latest email back & forth with OWC:
My Mac Pro is 3,1 early 2008. My understanding before purchase was that it would work in Mt. Lion and Windows.
Is there anyone who knows how to make this work?
This is a very well known issue that was discovered shortly after the 2006 Mac Pro first shipped.
Sincerely,
OWC Andy

HT2801 I do not see my dvd drive listed in the devices area of my MacBook Pro. How can I fix this problem?

My optical drives is working on my MacBook Pro laptop. However when I insert a DVD of any type I do not see it listed among the devices. I see the Mac Hard disk drive, Skype, idisk etc but no drive "D" or the DVD Drive. This is especially fraustrating when I am trying to copy photos or a movie to my hard disk drive. How can I fix this problem? Thank you.

Finder > Preferences > Sidebar
Under DEVICES the box for CDs, DVDs and iPods checked?

My program does not recognize my DVD drive and says, " No burner available". How do I fix this? It worked until one month ago

I have an HP Computer., approximately one year old. Since I bought the program,( about 8 months ago) it had worked correctly, but last month, I could not save projects to DVD because program said, " No burner detected" . Welcome any help as I am trying to convert Family VHS tapes to DVD.

wildbill43
What version of Premiere Elements are you using and on what computer operating system is it running?
Assuming for now you are aiming at DVD-VIDEO on DVD disc and not AVCHD on DVD disc.
We can try at least 3 different approaches to restore Premiere Elements burner location recognition for your DVD/CD burner (assumed not Blu-ray DVD burner).
For now, I am going to assume Premiere Elements 12 on Windows 7, 8, or 8.1 64 bit.
1. Delete the Adobe Premiere Elements Prefs file and, if necessary, the whole 12.0 Folder in which it exists.
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then you delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
2. Deactivate the program from within the opened project - in version 12, Expert workspace Help Menu/Sign Out. Then uninstall the program via the usual Control Panel route. Next do a ccleaner run through (regular cleaner and registry cleaner parts) to get rid of leftovers from incomplete uninstalls and reinstalls.
CCleaner - PC Optimization and Cleaning - Free Download
Finally reinstall the program with the antivirus and firewall(s) disabled.
3. Refresh the DVD drivers.
CD, DVD drive not recognized after Adobe application install | Windows
We will be watching for your results.
Thanks.
ATR
Add On...at the onset, please assure that the issue still exists with the antivirus and firewall(s) disabled.

I can not share a dvd drive and my Canon camera is no longer recognised

Since i have downloaded OSX Mavericks on my mac and my sons Mac Book pro we are unable to share his dvd drive with my mac, as well as not recognising my canon camera

You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

CD/DVD drive does not read all DVD formats and regions

Hi
My Teac-dw-224e-a does not read all DVDs formats and regions.
It does read CDs but no DVDs at all.
Not DVD-R and not even regular DVDs. I have checked the region of the DVD.
I have reinstalled the driver and also tried with different software.
What can I do?
Please help!

Hi
It is possible that your DVD drive has wrong region settings.
In this case it is not able to watch all possible DVD movies from different regions.
Of course you can change the settings 4 times. But after this changing the settings are fixed and its not possible to change it anymore.

HT1539 I have the new imac and it does not have a dvd drive. How can I download digital copy of a movie?

Some Blu rays and DVDs come with digital copies and you inset them into the dvd drive and it downloads the movie to itunes and then you can put them on any iDevice. The new iMac does not have a dvd or disc drive. What can I do?

You will either need to borrow or purchase an external DVD drive, or if you have access to another computer that has a DVD drive you may be able to use Remote Disk:
http://support.apple.com/kb/HT5287
Regards.

Equium A60 does not see a recording drive

Sadly more help is needed with my Equium A60 following on from the earlier fault of the missing CD\DVD drive. Thanks for the help earlier, I did get my cd drive back in 'My Computer' and it does read cds..
Today I tried to put some mp3s on a known working CDRW and my DVD writer is not seen. I get a error message saying you don't have a cd writer.. I have CD Creator 6 which I have been using ok before, that too does not see a recording drive on my laptop.
I can no longer format a blank cdr or drag and drop on a cdrw formatted previously.
Any ideas anyone.?? Thanx.!!

Hi,
in 'My Computer' right-click on the DVD drive and select properties. Check if on the record tab CD-recording is activated.
Bye

DVD player does not see a dvd or cd

on my notebook, a pavilion dv5, the cdrom player does not see a dvd or cd, this happened suddenly, not after installing things. it is an optiarc BDRom BC5500S. On internet I do''nt find any software for the driver The standard problemsolving [rogram does not work

Hallo, Arie:
Voor het oplossen van deze fout Code 39, volg deze instructies:
Opmerking: Na deze registersleutels verwijderen en opnieuw op te starten, het kan noodzakelijk zijn om het CD- of DVD-opname toepassingen opnieuw installeren.
1) Sluit alle geopende programma 's
2) Klik op Start, uitvoeren en typ REGEDIT en druk op Enter
3) Klik op de plustekens (+) naast de volgende mappen
HKEY_LOCAL_MACHINE SYSTEM
CurrentControlSet
Controle
Klasse
{4D36E965-E325-11CE-BFC1-08002BE10318}
4) Deze map is de DVD-/ cd-rom-station klasse Beschrijving in het register. Kijk voor een van de volgende namen in de rechterkolom.
UpperFilters
LowerFilters
UpperFilters.bak
LowerFilters.bak
5) Als een van de bovenstaande sleutels weergegeven in stap 4 worden weergegeven, klik op hen met de rechtermuisknop en kies verwijderen
6) Na het verwijderen van sluit de sleutels, de Register-Editor
7) Opnieuw opstarten uw computer
8) Open mijn Computer en controleer als uw CD- of DVD-stations zijn teruggekeerd. U kunt ook open Apparaatbeheer en controleer of de gele uitroepteken en fout code op het CD- of DVD-station is verdwenen.
Als u Adaptec Easy CD Creator hebt, ontvangt u een fout Code 31 in plaats van fout Code 39, dezelfde procedure hierboven zal werken voor de foutcode 31, 32 en 39.
To solve this Code 39 error, follow these instructions:
NOTE: After removing these registry keys and rebooting, it may be necessary to reinstall any CD or DVD recording applications.
1) Close all open programs
2) Click on Start, Run, and type REGEDIT and press Enter
3) Click on the plus signs (+) next to the following folders
HKEY_LOCAL_MACHINE SYSTEM
CurrentControlSet
Control
Class
{4D36E965-E325-11CE-BFC1-08002BE10318}
4) This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.
UpperFilters
LowerFilters
UpperFilters.bak
LowerFilters.bak
5) If any of the above keys shown in step 4 are listed, right-click on them and choose Delete
6) After deleting the keys, close the Registry Editor
7) Reboot your computer
8) Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.
If you have Adaptec Easy CD Creator, you may be receiving an Error Code 31 instead of Error Code 39, the same procedure above will work for the Error Code 31, 32, or 39.

Thinkpad T60 Error installing Vista not seeing cd/dvd to finsh installing

Thinkpad T60 Error installing Vista not seeing cd/dvd
I’ve removed all programs recommended by IBM and Microsoft. After Vista loads files
I get the error below. Its like it doesn’t see the cd dvd to reboot and finish installing. Any Ideas? Jack
Windows XP Professional Service Pack 3 (build 2600)
LENOVO 2623D6U ThinkPad T60
System Serial Number: L3A2060
Processor a
Main Circuit Board b
1.85 gigahertz Intel Pentium III
128 kilobyte primary memory cache
2048 kilobyte secondary memory cache
Board: LENOVO 2623D6U
Serial Number: VF05
Bus Clock: 167 megahertz
BIOS: LENOVO 79ETE5WW (2.25 ) 08/27/2009
Drives
Memory Modules c,d
99.41 Gigabytes Usable Hard Drive Capacity
48.52 Gigabytes Hard Drive Free Space
MAT**bleep**A DVD/CDRW UJDA775 [CD-ROM drive]
ST910021AS [Hard drive] (100.03 GB) -- drive 0
3072 Megabytes Installed Memory
Slot 'DIMM 1' has 1024 MB
Slot 'DIMM 2' has 2048 MB
http://i456.photobucket.com/albums/qq289/elktraveling/DSCN8033.jpg
<a href="http://s456.photobucket.com/albums/qq289/elktraveling/?action=view&current=DSCN8033.jpg" target="_blank"><img src="http://i456.photobucket.com/albums/qq289/elktraveling/DSCN8033.jpg" border="0" alt="Photobucket"></a>
[IMG]http://i456.photobucket.com/albums/qq289/elktraveling/DSCN8033.jpg[/IMG]

I was able to up grade XP to Vista without error.. I disabled everything in Bios. Vista loaded and was able to get IBM and Microsoft updates. I had already run Microsoft adviser so had idea which programs had to be uninstalled.

XBOX HD DVD drive and the Mac mini?

I hooked up the HD Dvd drive and it is recognized in both the Apple side and windows boot camp. I've tried both powerdvd ultra and windvd8 on the windows side to get the HD disc's to play but it says something about the video card not being supported when I try powerdvd, and when I try windvd it acts like it wants to play but does nothing at all. Has anyone got the xbox HD dvd drive to work with the mini and if so how?
oh...I have the mac mini Intel 1.66 duo upgraded to 2gb of ram.
Thanks in advance

The Mac mini video chip (the Intel GMA 950) apparently does not support HDCP. There is a free tool from CyberLink (the authors of PowerDVD) to show if your computer is good enough to play HD DVD or Blu-Ray see http://www.cyberlink.com/multi/support/bdhd_support/diagnosis.jsp
Having run this myself, I can confirm it reports that the Mac mini video chip does not support HDCP. In theory you might be able to use VGA instead of DVI and still play HD DVD disk.
The above however applies only if you are running Windows on your Mac. While it is possible to plug an XBox 360 HD DVD drive in to a Mac running Mac OS X, because Apple are still prevaricating over whether they will support HD DVD, or Blu-Ray or neither they have not as yet released any software to play such disks even if you can plug a drive in.
I have seen reports that you can use the XBox drive on a Mac to play ordinary DVDs but it is not possible (yet) to do anything more than that.
Right now, not a single Mac model supports HDCP (nor do the Apple Cinema displays). There is a small possibility that Apple might be able to release a firmware upgrade at some point to address this.
*Really Apple, you are falling further and further behind. Not only do you not do HDCP, not only do you not do HD DVD or Blu-Ray, but QuickTime cannot do a decent job of subtitles, or surround sound, or multiple audio tracks. And all this from a company (Apple) supposedly synonymous with multimedia.*
Yes, the TV/Movie studios are idiots, yes DRM is a stupid idea, but come on Apple get a move on.

Satellite A660 - Not finding external DVD drive

Hey guys. Newbie posting out of total desperation and needing help! I have posted in other forums with no luck. I bought a Samsung SH-D162D DVD Drive in a USB enclosure to connect to my Satellite A660 via USB.
I cannot get Windows 7 to find it! When I plug in the USB cable the balloon comes up to say it has been installed (sometimes), I can see it on for about 1 or 2 minutes then it drops off. It isnt listed in my hardware or anything. Its not found in Disk Management or My Devices so it isnt a case of changing the drive letter - I cant find the drive to change it. I have also tried to find the upper and lower settings in regedit. Couldnt find them so couldnt delete them as advised in other posts of this nature.
It is set to master, the IDE connector and power connectors are fine. Its gotta be a Windows 7 problem cause it does show up very breifly. In the minute or 2 its there I cant do anything with it. It just hangs although it will open and close. Ive googled it and cant find anything. Mainly registry issues but they didnt help.
Ive also connected it up to another laptop with XP and had no problems so I know the DVD Rom works fine and all the cables are ok. Ive tried in all 4 USB ports on my laptop and also turned off all energy settings. All with no luck. And I also have every Windows 7 update.
Heres exactly what happens from power off on the enclosure.
1 - I plug in the USB lead then turn on power to the enclosure.
2 - I quickly go to Start, and I can see the DVD Rom drive E next to my laptops dvd rom.
3 - The green bar at the top starts filling up from left to right and gets about half way then suddenly the DVD Rom icon disappears and so does the green bar.
4 - It then flashes up under the laptops DVD Rom icon with a Local Disk drive E but only for a split second.
5 - Sometimes a balloon comes up saying installing device, then device successfully installed...but not every time.
And thats it. I'm at a total loss and cant work it out, so any help is really appreciated!

Hi Smee,
So if you have already connected the external drive to another computer and this worked properly, it seems to be a driver or compatibility issue between your external DVD drive and and your Satellite A660
It will be connected to USB port so have you tried to remove all USB ports from device manager? After this you should restart your computer and the USB ports will be recognized from device manager automatically. Furthermore I would also try updating the chipset driver. Newest version you can download on official Toshiba website:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Have you also tested other devices on your A660 if they work properly?

Imac will not see my hard drive on start up, wants to start from network start up disk that does not exist. How to get rid of it? So there is just one choice / my hard drive.

I have a Intel duo Imac. Everything has been running relatively smoothly for a few years now. All of a sudden my computer will not start. I get the flashing folder with a question mark.
When I go to Start up disk in my system perfernces while the computer is on. I see 2 possible choices. One is my hard drive with the operating system shown. The other is a non-existant Network Start up disk with a question mark in it ( looks like a hard drive with a question mark and it say's its a "network start up disk).
All I think I want to do is get rid of the Network startup with the question mark. I can not find anywhere how one can just remove an old or non existant start up disk without reformatting.
I believe this came from a clients hard drive who had a network system on it. We no longer have that drive. It no longer exists. But a latent icon shows up in start up disk.
When I go to change the start up disk. I can change it to either the hard drive or the network with the question mark. But when I select my hard drive and then got to restart the computer. I get the flashing folder with a question mark on start up. I have also seen the flashing globe a couple times.
When I attempt to run disk utility from may install disk ( holding down "C" on start-up ). Disk utility does not see my hard drive. Just the Apple install disk with the disk utility on it.
What can I do to remedy this short of re-installing? Will a program like Disk Warrior or Tech Tool help?

Thank you. That's what I thought will need to happen.
One more question. I tried using the Apple install disk that came with the computer. It's an OS 10.5.6 disk. It does not see my 10.6.8 system internal hard drive to repair. All it see's is itself 10.5.6 disk. Do you think I can use a 10.8+ disk utillity since that is a higher system it will see the 10.6.8. Where the 10.5.6 does not?
I don't want to turn the computer off for fear I'll get the question mark again. P-Ram got me going last time but for how long I don't know? It would be nice to be able to turn the computer off for the night and startup as usual to give it a rest and try to reset itself.
Thanks for your help, I know I will eventually need to re-install. But I am in the middle of a project with tight deadlines and all I can do right now is back-up. Trying to migrate to another computer temporarily to finish the job. That's a lot of extra work in the short time also.
Just trying to put a band-aid on it for another couple weeks.

A75-209 not seeing CD/dvd drive and laptop loggof few seconds after loggin

Similar Messages

Maybe you are looking for