A75A-G35 Problem installing Radeon 5850 and 5870 Video Cards
Hello,
I have a A75A-G35 motherboard with an AMD A4 processor.
When I install the first Radeon card (radeon 5850) the driver finds the card (no problem).
When I install the second card (Radeon 5870) the driver cannot install and the system reports an error.
I have checked to be sure the cards are properly seated, can anyone suggest a solution?
Thank you!!
Why do you want to mix a 5870 and a 5850? Crossfire will work badly on this mainboard as it can only provide X4 for the second slot and an A4 processor is also far too slow to take any advantage of a CF setup anyway.
Similar Messages
-
Problems installing Adobe Air and BBC iPlayer Desktop
Problems installing Adobe Air and BBC iPlayer Desktop
I'm running Windows 7 32 bit on an ASUS netbook with 2mb ram. I installed both Air 3.7 and BBC iPlayer Desktop using Google Chrome. I downloaded 3 BBC programmes. Two ran fine but the third wouldn't start and I kept getting a message to try again later. I deleted this programme and downloaded it again, with the same result.
So I uninstalled both Air and the BBC iPlayer Desktop, the Air exe file and the two folders at the following locations:
C:\Users\USERNAME\AppData\Roaming\Adobe\AIR\ and
C:\Users\USERNAME\AppData\Roaming\BBCiPlayerDesktop.xxx
Since doing this each time I try to install Air either on its own or with the BBC iPlayer software I get the message part way through installation:
"Sorry, an error has occurred.
An error occurred while installing Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator."
I have run the Microsoft Fix it programme and still get the same result.
I have tried everything on your Trouble Shooting page apart from the bit about the elevated command prompt, but as I'm the sole user and administrator, that seems unnecessary.
I have closed Chrome and tried installation using Windows Explorer but with the same result.
I have tried all the above with Microsoft Security Essentials running and disabled. And I have tried the same with Astrill on and off.
I have had a response from the BBC with much the same advice as appears on your trouble shooting page.
Here is the Air installation log, followed by the MSI log.
[2013-04-25:06:53:46] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:06:53:46] Commandline is:
[2013-04-25:06:53:46] No installed runtime detected
[2013-04-25:06:53:57] Relaunching with elevation
[2013-04-25:06:53:57] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\air79c1.tmp\adobe air installer.exe -ei
[2013-04-25:06:54:02] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:06:54:02] Commandline is: -stdio \\.\pipe\AIR_1172_0 -ei
[2013-04-25:06:54:02] No installed runtime detected
[2013-04-25:06:54:03] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:06:54:04] Installing msi at c:\users\steve\appdata\local\temp
\air79c1.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:06:54:10] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:06:54:10] Rolling back install of c:\users\steve\appdata\local
\temp\air79c1.tmp\setup.msi
[2013-04-25:06:54:10] Rollback complete
[2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Runtime Installer end with exit code 7
[2013-04-25:06:54:20] Runtime Installer end with exit code 7
[2013-04-25:06:55:38] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:06:55:38] Commandline is:
[2013-04-25:06:55:38] No installed runtime detected
[2013-04-25:06:55:45] Relaunching with elevation
[2013-04-25:06:55:45] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\air30fe.tmp\adobe air installer.exe -ei
[2013-04-25:06:55:48] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:06:55:48] Commandline is: -stdio \\.\pipe\AIR_1264_0 -ei
[2013-04-25:06:55:48] No installed runtime detected
[2013-04-25:06:55:49] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:06:55:51] Installing msi at c:\users\steve\appdata\local\temp
\air30fe.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:06:55:55] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:06:55:55] Rolling back install of c:\users\steve\appdata\local
\temp\air30fe.tmp\setup.msi
[2013-04-25:06:55:55] Rollback complete
[2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Runtime Installer end with exit code 7
[2013-04-25:06:55:59] Runtime Installer end with exit code 7
[2013-04-25:07:05:12] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:07:05:12] Commandline is:
[2013-04-25:07:05:12] No installed runtime detected
[2013-04-25:07:05:18] Relaunching with elevation
[2013-04-25:07:05:18] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\air953.tmp\adobe air installer.exe -ei
[2013-04-25:07:05:24] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:07:05:24] Commandline is: -stdio \\.\pipe\AIR_3888_0 -ei
[2013-04-25:07:05:24] No installed runtime detected
[2013-04-25:07:05:24] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:07:05:26] Installing msi at c:\users\steve\appdata\local\temp
\air953.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:05:29] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:07:05:29] Rolling back install of c:\users\steve\appdata\local
\temp\air953.tmp\setup.msi
[2013-04-25:07:05:29] Rollback complete
[2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Runtime Installer end with exit code 7
[2013-04-25:07:05:31] Runtime Installer end with exit code 7
[2013-04-25:07:06:12] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:07:06:12] Commandline is:
[2013-04-25:07:06:12] No installed runtime detected
[2013-04-25:07:06:21] Relaunching with elevation
[2013-04-25:07:06:22] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\aire916.tmp\adobe air installer.exe -ei
[2013-04-25:07:06:32] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:07:06:32] Commandline is: -stdio \\.\pipe\AIR_5884_0 -ei
[2013-04-25:07:06:32] No installed runtime detected
[2013-04-25:07:06:32] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:07:06:33] Installing msi at c:\users\steve\appdata\local\temp
\aire916.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:06:37] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:07:06:37] Rolling back install of c:\users\steve\appdata\local
\temp\aire916.tmp\setup.msi
[2013-04-25:07:06:37] Rollback complete
[2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Runtime Installer end with exit code 7
[2013-04-25:07:06:40] Runtime Installer end with exit code 7
[2013-04-25:07:26:15] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:07:26:15] Commandline is:
[2013-04-25:07:26:15] No installed runtime detected
[2013-04-25:07:26:28] Relaunching with elevation
[2013-04-25:07:26:28] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\air3063.tmp\adobe air installer.exe -ei
[2013-04-25:07:26:37] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:07:26:37] Commandline is: -stdio \\.\pipe\AIR_2348_0 -ei
[2013-04-25:07:26:37] No installed runtime detected
[2013-04-25:07:26:37] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:07:26:39] Installing msi at c:\users\steve\appdata\local\temp
\air3063.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:26:48] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:07:26:48] Rolling back install of c:\users\steve\appdata\local
\temp\air3063.tmp\setup.msi
[2013-04-25:07:26:48] Rollback complete
[2013-04-25:07:26:48] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:26:48] Runtime Installer end with exit code 7
[2013-04-25:07:46:09] Runtime Installer end with exit code 7
=== Verbose logging started: 25/04/2013 08:34:51 Build type: SHIP UNICODE
5.00.7601.00 Calling process: C:\windows\System32\msiexec.exe ===
MSI (c) (68:6C) [08:34:51:397]: Font created. Charset: Req=0, Ret=0, Font:
Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (68:6C) [08:34:51:397]: Font created. Charset: Req=0, Ret=0, Font:
Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (68:70) [08:34:51:469]: Resetting cached policy values
MSI (c) (68:70) [08:34:51:469]: Machine policy value 'Debug' is 0
MSI (c) (68:70) [08:34:51:469]: ******* RunEngine:
******* Product: C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
******* Action:
******* CommandLine: **********
MSI (c) (68:70) [08:34:51:473]: Machine policy value 'DisableUserInstalls' is 0
MSI (c) (68:70) [08:34:51:653]: SOFTWARE RESTRICTION POLICY: Verifying
package --> 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi' against
software restriction policy
MSI (c) (68:70) [08:34:51:654]: SOFTWARE RESTRICTION POLICY: C:\Users
\Steve\Downloads\MicrosoftFixit50381.msi has a digital signature
MSI (c) (68:70) [08:34:51:966]: SOFTWARE RESTRICTION POLICY: C:\Users
\Steve\Downloads\MicrosoftFixit50381.msi is permitted to run at the
'unrestricted' authorization level.
MSI (c) (68:70) [08:34:51:986]: Cloaking enabled.
MSI (c) (68:70) [08:34:51:986]: Attempting to enable all disabled privileges
before calling Install on Server
MSI (c) (68:70) [08:34:52:001]: End dialog not enabled
MSI (c) (68:70) [08:34:52:001]: Original package ==> C:\Users\Steve
\Downloads\MicrosoftFixit50381.msi
MSI (c) (68:70) [08:34:52:001]: Package we're running from ==> C:\Users
\Steve\Downloads\MicrosoftFixit50381.msi
MSI (c) (68:70) [08:34:52:010]: APPCOMPAT: Compatibility mode property
overrides found.
MSI (c) (68:70) [08:34:52:012]: APPCOMPAT: looking for appcompat database
entry with ProductCode '{55D13F49-FCB8-4892-8266-05D373FCAA61}'.
MSI (c) (68:70) [08:34:52:012]: APPCOMPAT: no matching ProductCode found
in database.
MSI (c) (68:70) [08:34:52:041]: MSCOREE not loaded loading copy from
system32
MSI (c) (68:70) [08:34:52:063]: Machine policy value 'TransformsSecure' is 0
MSI (c) (68:70) [08:34:52:063]: User policy value 'TransformsAtSource' is 0
MSI (c) (68:70) [08:34:52:064]: Note: 1: 2262 2: File 3: -2147287038
MSI (c) (68:70) [08:34:52:064]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
MSI (c) (68:70) [08:34:52:065]: Machine policy value 'DisablePatch' is 0
MSI (c) (68:70) [08:34:52:065]: Machine policy value 'AllowLockdownPatch' is
0
MSI (c) (68:70) [08:34:52:066]: Machine policy value 'DisableMsi' is 0
MSI (c) (68:70) [08:34:52:066]: Machine policy value 'AlwaysInstallElevated' is
0
MSI (c) (68:70) [08:34:52:066]: User policy value 'AlwaysInstallElevated' is 0
MSI (c) (68:70) [08:34:52:066]: Running product '{55D13F49-FCB8-4892-
8266-05D373FCAA61}' with user privileges: It's not assigned.
MSI (c) (68:70) [08:34:52:067]: Machine policy value 'DisableLUAPatching' is 0
MSI (c) (68:70) [08:34:52:067]: Machine policy value
'DisableFlyWeightPatching' is 0
MSI (c) (68:70) [08:34:52:068]: Enabling baseline caching for this transaction
since all active patches are MSI 3.0 style MSPs or at least one MSI 3.0 minor
update patch is active
MSI (c) (68:70) [08:34:52:071]: APPCOMPAT: looking for appcompat database
entry with ProductCode '{55D13F49-FCB8-4892-8266-05D373FCAA61}'.
MSI (c) (68:70) [08:34:52:072]: APPCOMPAT: no matching ProductCode found
in database.
MSI (c) (68:70) [08:34:52:072]: Transforms are not secure.
MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding MsiLogFileLocation
property. Its value is 'C:\Users\Steve\AppData\Local\Temp\MSIa5745.LOG'.
MSI (c) (68:70) [08:34:52:073]: Command Line: CURRENTDIRECTORY=C:\Users
\Steve\Downloads CLIENTUILEVEL=0 CLIENTPROCESSID=9576
MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding PackageCode
property. Its value is '{1C7C3009-013E-4A16-9A0F-0000FB80A613}'.
MSI (c) (68:70) [08:34:52:073]: Product Code passed to Engine.Initialize:
MSI (c) (68:70) [08:34:52:073]: Product Code from property table before
transforms: '{55D13F49-FCB8-4892-8266-05D373FCAA61}'
MSI (c) (68:70) [08:34:52:073]: Product Code from property table after
transforms: '{55D13F49-FCB8-4892-8266-05D373FCAA61}'
MSI (c) (68:70) [08:34:52:073]: Product not registered: beginning first-time
install
MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding ProductState
property. Its value is '-1'.
MSI (c) (68:70) [08:34:52:073]: Entering
CMsiConfigurationManager::SetLastUsedSource.
MSI (c) (68:70) [08:34:52:073]: User policy value 'SearchOrder' is 'nmu'
MSI (c) (68:70) [08:34:52:073]: Adding new sources is allowed.
MSI (c) (68:70) [08:34:52:074]: PROPERTY CHANGE: Adding
PackagecodeChanging property. Its value is '1'.
MSI (c) (68:70) [08:34:52:074]: Package name extracted from package path:
'MicrosoftFixit50381.msi'
MSI (c) (68:70) [08:34:52:075]: Package to be registered:
'MicrosoftFixit50381.msi'
MSI (c) (68:70) [08:34:52:075]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (68:70) [08:34:52:078]: Note: 1: 2262 2: AdminProperties 3: -
2147287038
MSI (c) (68:70) [08:34:52:078]: Machine policy value 'AlwaysInstallElevated' is
0
MSI (c) (68:70) [08:34:52:078]: User policy value 'AlwaysInstallElevated' is 0
MSI (c) (68:70) [08:34:52:079]: Running product '{55D13F49-FCB8-4892-
8266-05D373FCAA61}' with user privileges: It's not assigned.
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding
CURRENTDIRECTORY property. Its value is 'C:\Users\Steve\Downloads'.
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding CLIENTUILEVEL
property. Its value is '0'.
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding CLIENTPROCESSID
property. Its value is '9576'.
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding
MsiSystemRebootPending property. Its value is '1'.
MSI (c) (68:70) [08:34:52:079]: TRANSFORMS property is now:
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding VersionDatabase
property. Its value is '200'.
MSI (c) (68:70) [08:34:52:081]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming
MSI (c) (68:70) [08:34:52:082]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\Favorites
MSI (c) (68:70) [08:34:52:084]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (c) (68:70) [08:34:52:085]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\Documents
MSI (c) (68:70) [08:34:52:086]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (c) (68:70) [08:34:52:088]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Recent
MSI (c) (68:70) [08:34:52:089]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\SendTo
MSI (c) (68:70) [08:34:52:091]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Templates
MSI (c) (68:70) [08:34:52:092]: SHELL32::SHGetFolderPath returned: C:
\ProgramData
MSI (c) (68:70) [08:34:52:093]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Local
MSI (c) (68:70) [08:34:52:094]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\Pictures
MSI (c) (68:70) [08:34:52:097]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
\Administrative Tools
MSI (c) (68:70) [08:34:52:098]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
\Startup
MSI (c) (68:70) [08:34:52:099]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (c) (68:70) [08:34:52:101]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (c) (68:70) [08:34:52:102]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\Desktop
MSI (c) (68:70) [08:34:52:104]: SHELL32::SHGetFolderPath returned: C:
\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (c) (68:70) [08:34:52:106]: SHELL32::SHGetFolderPath returned: C:
\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (c) (68:70) [08:34:52:106]: SHELL32::SHGetFolderPath returned: C:
\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (c) (68:70) [08:34:52:107]: SHELL32::SHGetFolderPath returned: C:
\ProgramData\Microsoft\Windows\Start Menu
MSI (c) (68:70) [08:34:52:109]: SHELL32::SHGetFolderPath returned: C:
\Users\Public\Desktop
MSI (c) (68:70) [08:34:52:113]: SHELL32::SHGetFolderPath returned: C:
\windows\Fonts
MSI (c) (68:70) [08:34:52:115]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans
Serif 4: 0 5: 16
MSI (c) (68:70) [08:34:52:147]: MSI_LUA: Setting AdminUser property to 1
because this is the client or the user has already permitted elevation
MSI (c) (68:70) [08:34:52:147]: PROPERTY CHANGE: Adding AdminUser
property. Its value is '1'.
MSI (c) (68:70) [08:34:52:147]: PROPERTY CHANGE: Adding Privileged
property. Its value is '1'.
MSI (c) (68:70) [08:34:52:148]: Note: 1: 1402 2: HKEY_CURRENT_USER
\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (c) (68:70) [08:34:52:148]: PROPERTY CHANGE: Adding USERNAME
property. Its value is 'Steve'.
MSI (c) (68:70) [08:34:52:149]: Note: 1: 1402 2: HKEY_CURRENT_USER
\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding DATABASE
property. Its value is 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi'.
MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding OriginalDatabase
property. Its value is 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi'.
MSI (c) (68:70) [08:34:52:149]: Machine policy value 'MsiDisableEmbeddedUI' is
0
MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding SourceDir
property. Its value is 'C:\Users\Steve\Downloads\'.
MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding SOURCEDIR
property. Its value is 'C:\Users\Steve\Downloads\'.
MSI (c) (68:6C) [08:34:52:153]: PROPERTY CHANGE: Adding VersionHandler
property. Its value is '5.00'.
=== Logging started: 25/04/2013 08:34:52 ===
MSI (c) (68:70) [08:34:52:171]: Note: 1: 2262 2: PatchPackage 3: -
2147287038
MSI (c) (68:70) [08:34:52:172]: Machine policy value 'DisableRollback' is 0
MSI (c) (68:70) [08:34:52:172]: User policy value 'DisableRollback' is 0
MSI (c) (68:70) [08:34:52:172]: PROPERTY CHANGE: Adding UILevel property.
Its value is '5'.
MSI (c) (68:70) [08:34:52:172]: Note: 1: 2262 2: Font 3: -2147287038
MSI (c) (68:70) [08:34:52:174]: PROPERTY CHANGE: Adding ACTION property.
Its value is 'INSTALL'.
MSI (c) (68:70) [08:34:52:174]: Doing action: INSTALL
Action 08:34:52: INSTALL.
Action start 08:34:52: INSTALL.
MSI (c) (68:70) [08:34:52:176]: UI Sequence table 'InstallUISequence' is
present and populated.
MSI (c) (68:70) [08:34:52:176]: Running UISequence
MSI (c) (68:70) [08:34:52:176]: PROPERTY CHANGE: Adding EXECUTEACTION
property. Its value is 'INSTALL'.
MSI (c) (68:70) [08:34:52:176]: Doing action: Milestone_ERRCA_UIAN726
Action 08:34:52: Milestone_ERRCA_UIAN726.
Action start 08:34:52: Milestone_ERRCA_UIAN726.
MSI (c) (68:70) [08:34:52:177]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_ERRCA_UIAN726'
MSI (c) (68:70) [08:34:52:178]: PROPERTY CHANGE: Adding Milestone
property. Its value is 'ERRCA_UIANDADVERTISED'.
Action ended 08:34:52: Milestone_ERRCA_UIAN726. Return value 1.
MSI (c) (68:70) [08:34:52:178]: Skipping action: ERRCA_UIANDADVERTISED
(condition is false)
MSI (c) (68:70) [08:34:52:178]: Doing action: Milestone_AppSearch122
Action 08:34:52: Milestone_AppSearch122.
Action start 08:34:52: Milestone_AppSearch122.
MSI (c) (68:70) [08:34:52:180]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_AppSearch122'
MSI (c) (68:70) [08:34:52:180]: PROPERTY CHANGE: Modifying Milestone
property. Its current value is 'ERRCA_UIANDADVERTISED'. Its new value:
'AppSearch'.
Action ended 08:34:52: Milestone_AppSearch122. Return value 1.
MSI (c) (68:70) [08:34:52:181]: Doing action: AppSearch
Action 08:34:52: AppSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:52: AppSearch.
MSI (c) (68:70) [08:34:52:182]: Note: 1: 2262 2: AppSearch 3: -2147287038
Action ended 08:34:52: AppSearch. Return value 1.
MSI (c) (68:70) [08:34:52:183]: Doing action: FindRelatedProducts
Action 08:34:52: FindRelatedProducts. {\FinalUIFont}
[PROGRESS_RESTORE_TXT]
Action start 08:34:52: FindRelatedProducts.
Action ended 08:34:52: FindRelatedProducts. Return value 1.
MSI (c) (68:70) [08:34:52:185]: Doing action: Milestone_EulaForm201
Action 08:34:52: Milestone_EulaForm201.
Action start 08:34:52: Milestone_EulaForm201.
MSI (c) (68:70) [08:34:52:186]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_EulaForm201'
MSI (c) (68:70) [08:34:52:187]: PROPERTY CHANGE: Modifying Milestone
property. Its current value is 'AppSearch'. Its new value: 'EulaForm'.
Action ended 08:34:52: Milestone_EulaForm201. Return value 1.
MSI (c) (68:70) [08:34:52:187]: Doing action: EulaForm
Action 08:34:52: EulaForm.
Action start 08:34:52: EulaForm.
MSI (c) (68:70) [08:34:52:193]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'EulaForm'
MSI (c) (68:6C) [08:34:52:205]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For VSI_MS_Sans_Serif13.0_0_0 textstyle, the system created a 'MS
Sans Serif' font, in 0 character set, of 13 pixels height.
MSI (c) (68:6C) [08:34:52:221]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For VsdDefaultUIFont.524F4245_5254_5341_4C45_534153783400
textstyle, the system created a 'MS Sans Serif' font, in 0 character set, of 13
pixels height.
MSI (c) (68:6C) [08:34:52:225]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For VSI_MS_Sans_Serif16.0_1_0 textstyle, the system created a 'MS
Sans Serif' font, in 0 character set, of 20 pixels height.
MSI (c) (68:6C) [08:34:52:301]: Note: 1: 2262 2: CheckBox 3: -2147287038
Action 08:34:52: EulaForm. Dialog created
MSI (c) (68:10) [08:34:52:312]: Note: 1: 2731 2: 0
MSI (c) (68:6C) [08:34:55:670]: PROPERTY CHANGE: Adding EulaForm_Property
property. Its value is '1'.
Action ended 08:34:56: EulaForm. Return value 1.
MSI (c) (68:70) [08:34:56:881]: Doing action: EULAACCEPTED_ACTION
Action 08:34:56: EULAACCEPTED_ACTION.
Action start 08:34:56: EULAACCEPTED_ACTION.
MSI (c) (68:70) [08:34:56:883]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'EULAACCEPTED_ACTION'
MSI (c) (68:70) [08:34:56:883]: PROPERTY CHANGE: Adding EULAACCEPTED
property. Its value is '1'.
Action ended 08:34:56: EULAACCEPTED_ACTION. Return value 1.
MSI (c) (68:70) [08:34:56:884]: Doing action: Milestone_LaunchCond24
Action 08:34:56: Milestone_LaunchCond24.
Action start 08:34:56: Milestone_LaunchCond24.
MSI (c) (68:70) [08:34:56:886]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_LaunchCond24'
MSI (c) (68:70) [08:34:56:887]: PROPERTY CHANGE: Modifying Milestone
property. Its current value is 'EulaForm'. Its new value: 'LaunchConditions'.
Action ended 08:34:56: Milestone_LaunchCond24. Return value 1.
MSI (c) (68:70) [08:34:56:889]: Doing action: LaunchConditions
Action 08:34:56: LaunchConditions. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: LaunchConditions.
Action ended 08:34:56: LaunchConditions. Return value 1.
MSI (c) (68:70) [08:34:56:891]: Doing action: CCPSearch
Action 08:34:56: CCPSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: CCPSearch.
MSI (c) (68:70) [08:34:56:892]: Note: 1: 2262 2: CCPSearch 3: -2147287038
Action ended 08:34:56: CCPSearch. Return value 1.
MSI (c) (68:70) [08:34:56:892]: Doing action: RMCCPSearch
Action 08:34:56: RMCCPSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: RMCCPSearch.
MSI (c) (68:70) [08:34:56:893]: Note: 1: 2262 2: CCPSearch 3: -2147287038
Action ended 08:34:56: RMCCPSearch. Return value 0.
MSI (c) (68:70) [08:34:56:894]: Doing action: ValidateProductID
Action 08:34:56: ValidateProductID. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: ValidateProductID.
Action ended 08:34:56: ValidateProductID. Return value 1.
MSI (c) (68:70) [08:34:56:895]: Doing action: Milestone_DIRCA_TARG947
Action 08:34:56: Milestone_DIRCA_TARG947.
Action start 08:34:56: Milestone_DIRCA_TARG947.
MSI (c) (68:70) [08:34:56:897]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_DIRCA_TARG947'
MSI (c) (68:70) [08:34:56:897]: PROPERTY CHANGE: Modifying Milestone
property. Its current value is 'LaunchConditions'. Its new value:
'DIRCA_TARGETDIR'.
Action ended 08:34:56: Milestone_DIRCA_TARG947. Return value 1.
MSI (c) (68:70) [08:34:56:897]: Doing action: DIRCA_TARGETDIR
Action 08:34:56: DIRCA_TARGETDIR. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: DIRCA_TARGETDIR.
MSI (c) (68:70) [08:34:56:899]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'DIRCA_TARGETDIR'
MSI (c) (68:70) [08:34:56:900]: PROPERTY CHANGE: Adding TARGETDIR
property. Its value is 'C:\Program Files\Microsoft\Microsoft Fix it 50381'.
Action ended 08:34:56: DIRCA_TARGETDIR. Return value 1.
MSI (c) (68:70) [08:34:56:900]: Doing action: CostInitialize
Action 08:34:56: CostInitialize. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: CostInitialize.
MSI (c) (68:70) [08:34:56:901]: Machine policy value 'MaxPatchCacheSize' is
10
MSI (c) (68:70) [08:34:56:901]: Baseline: Sorting baselines for {55D13F49-
FCB8-4892-8266-05D373FCAA61}.
MSI (c) (68:70) [08:34:56:901]: Baseline: New baseline 2.1.3 from transaction.
MSI (c) (68:70) [08:34:56:902]: Baseline: Sorted order Native: Order 0.
MSI (c) (68:70) [08:34:56:902]: Baseline Data Table:
MSI (c) (68:70) [08:34:56:902]: ProductCode: {55D13F49-FCB8-4892-8266-
05D373FCAA61} Version: 2.1.3 Attributes: 0 PatchId: Native BaselineId: -
2147483648 Order: 0
MSI (c) (68:70) [08:34:56:902]: Baseline File Table:
MSI (c) (68:70) [08:34:56:912]: PROPERTY CHANGE: Adding ROOTDRIVE
property. Its value is 'D:\'.
MSI (c) (68:70) [08:34:56:913]: PROPERTY CHANGE: Adding CostingComplete
property. Its value is '0'.
Action ended 08:34:56: CostInitialize. Return value 1.
MSI (c) (68:70) [08:34:56:914]: Doing action: FileCost
Action 08:34:56: FileCost. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: FileCost.
MSI (c) (68:70) [08:34:56:915]: Note: 1: 2262 2: MsiAssembly 3: -2147287038
MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: RemoveFile 3: -2147287038
MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: MoveFile 3: -2147287038
MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: DuplicateFile 3: -2147287038
MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: Shortcut 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: Class 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: Extension 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: TypeLib 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: IniFile 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: ReserveCost 3: -2147287038
Action ended 08:34:56: FileCost. Return value 1.
MSI (c) (68:70) [08:34:56:917]: Doing action: IsolateComponents
Action 08:34:56: IsolateComponents. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: IsolateComponents.
MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: BindImage 3: -2147287038
MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: IsolatedComponent 3: -
2147287038
MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: Patch 3: -2147287038
Action ended 08:34:56: IsolateComponents. Return value 1.
MSI (c) (68:70) [08:34:56:920]: Skipping action: ResumeForm (condition is
false)
MSI (c) (68:70) [08:34:56:920]: Skipping action: MaintenanceForm (condition
is false)
MSI (c) (68:70) [08:34:56:920]: Doing action: CostFinalize
Action 08:34:56: CostFinalize. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: CostFinalize.
MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding OutOfDiskSpace
property. Its value is '0'.
MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
OutOfNoRbDiskSpace property. Its value is '0'.
MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
PrimaryVolumeSpaceAvailable property. Its value is '0'.
MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
PrimaryVolumeSpaceRequired property. Its value is '0'.
MSI (c) (68:70) [08:34:56:921]: PROPERTY CHANGE: Adding
PrimaryVolumeSpaceRemaining property. Its value is '0'.
MSI (c) (68:70) [08:34:56:921]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (68:70) [08:34:56:921]: Note: 1: 2262 2: Condition 3: -2147287038
MSI (c) (68:70) [08:34:56:923]: PROPERTY CHANGE: Modifying TARGETDIR
property. Its current value is 'C:\Program Files\Microsoft\Microsoft Fix it 50381'.
Its new value: 'C:\Program Files\Microsoft\Microsoft Fix it 50381\'.
MSI (c) (68:70) [08:34:56:923]: Target path resolution complete. Dumping
Directory table...
MSI (c) (68:70) [08:34:56:923]: Note: target paths subject to change (via
custom actions or browsing)
MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: TARGETDIR , Object: C:
\Program Files\Microsoft\Microsoft Fix it 50381\
MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: WindowsFolder , Object: C:
\windows\
MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: ProgramMenuFolder ,
Object: C:\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu
\Programs\
MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: DesktopFolder , Object: C:
\Users\Steve\Desktop\
MSI (c) (68:70) [08:34:56:923]: PROPERTY CHANGE: Adding INSTALLLEVEL
property. Its value is '1'.
MSI (c) (68:70) [08:34:56:923]: Note: 1: 2262 2: IsolatedComponent 3: -
2147287038
MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: BindImage 3: -2147287038
MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: RemoveFile 3: -2147287038
Action ended 08:34:56: CostFinalize. Return value 1.
MSI (c) (68:70) [08:34:56:925]: Doing action: ProgressForm
Action 08:34:56: ProgressForm.
Action start 08:34:56: ProgressForm.
MSI (c) (68:70) [08:34:56:926]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'ProgressForm'
MSI (c) (68:6C) [08:34:56:938]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control Line1 on dialog ProgressForm extends beyond the
boundaries of the dialog to the right by 3 pixels
The installer has encountered an unexpected error installing this package. This
may indicate a problem with this package. The error code is 2826. The
arguments are: ProgressForm, Line1, to the right
MSI (c) (68:6C) [08:34:56:941]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control Line2 on dialog ProgressForm extends beyond the
boundaries of the dialog to the right by 3 pixels
The installer has encountered an unexpected error installing this package. This
may indicate a problem with this package. The error code is 2826. The
arguments are: ProgressForm, Line2, to the right
MSI (c) (68:6C) [08:34:56:948]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control BannerBmp on dialog ProgressForm extends beyond
the boundaries of the dialog to the right by 3 pixels
The installer has encountered an unexpected error installing this package. This
may indicate a problem with this package. The error code is 2826. The
arguments are: ProgressForm, BannerBmp, to the right
Action 08:34:56: ProgressForm. Dialog created
Action ended 08:34:57: ProgressForm. Return value 1.
MSI (c) (68:70) [08:34:57:011]: Doing action: ExecuteAction
Action 08:34:57: ExecuteAction. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
MSI (c) (68:6C) [08:34:57:012]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For FinalUIFont textstyle, the system created a 'Arial' font, in 0
character set, of 15 pixels height.
Action start 08:34:57: ExecuteAction.
MSI (c) (68:70) [08:34:57:035]: PROPERTY CHANGE: Adding SECONDSEQUENCE
property. Its value is '1'.
MSI (c) (68:70) [08:34:57:043]: Grabbed execution mutex.
MSI (c) (68:70) [08:34:57:043]: Incrementing counter to disable shutdown.
Counter after increment: 0
MSI (c) (68:70) [08:34:57:045]: Switching to server: TARGETDIR="C:\Program
Files\Microsoft\Microsoft Fix it 50381\" EULAACCEPTED="1"
CURRENTDIRECTORY="C:\Users\Steve\Downloads" CLIENTUILEVEL="0"
CLIENTPROCESSID="9576" USERNAME="Steve" SOURCEDIR="C:\Users\Steve
\Downloads\" ACTION="INSTALL" EXECUTEACTION="INSTALL" ROOTDRIVE="D:\"
INSTALLLEVEL="1" SECONDSEQUENCE="1" ADDLOCAL=DefaultFeature
MSI (s) (C8:D4) [08:34:57:086]: Running installation inside multi-package
transaction C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
MSI (s) (C8:D4) [08:34:57:086]: Grabbed execution mutex.
MSI (s) (C8:BC) [08:34:57:092]: Resetting cached policy values
MSI (s) (C8:BC) [08:34:57:092]: Machine policy value 'Debug' is 0
MSI (s) (C8:BC) [08:34:57:092]: ******* RunEngine:
******* Product: C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
******* Action: INSTALL
******* CommandLine: **********
MSI (s) (C8:BC) [08:34:57:096]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (C8:BC) [08:34:57:097]: Setting cached product context: User non-
assigned for product: 48945AC3B41AEF24F91FE79A10157D52
MSI (s) (C8:BC) [08:34:57:097]: Using cached product context: User non-
assigned for product: 48945AC3B41AEF24F91FE79A10157D52
MSI (s) (C8:BC) [08:34:57:099]: Setting cached product context: User non-
assigned for product: 6BBFDF96D153C8B4988D68D79C0D2A4A
MSI (s) (C8:BC) [08:34:57:099]: Using cached product context: User non-
assigned for product: 6BBFDF96D153C8B4988D68D79C0D2A4A
MSI (s) (C8:BC) [08:34:57:101]: Setting cached product context: User non-
assigned for product: CAB1E4D953B64F542BD433D9568A0AB6
MSI (s) (C8:BC) [08:34:57:101]: Using cached product context: User non-
assigned for product: CAB1E4D953B64F542BD433D9568A0AB6
MSI (s) (C8:BC) [08:34:57:103]: Setting cached product context: User non-
assigned for product: DED5B648C8CDA1E45B4BF9B5930AACEC
MSI (s) (C8:BC) [08:34:57:103]: Using cached product context: User non-
assigned for product: DED5B648C8CDA1E45B4BF9B5930AACEC
MSI (s) (C8:BC) [08:34:57:104]: Setting cached product context: User non-
assigned for product: E2EE924EC67B3554B8404B55780FF01D
MSI (s) (C8:BC) [08:34:57:104]: Using cached product context: User non-
assigned for product: E2EE924EC67B3554B8404B55780FF01D
MSI (s) (C8:BC) [08:34:57:106]: Setting cached product context: machine
assigned for product: 00002109001001400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:106]: Using cached product context: machine
assigned for product: 00002109001001400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:107]: Setting cached product context: machine
assigned for product: 00002109001031400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:108]: Using cached product context: machine
assigned for product: 00002109001031400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:110]: Setting cached product context: machine
assigned for product: 00002109001070400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:110]: Using cached product context: machine
assigned for product: 00002109001070400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:111]: Setting cached product context: machine
assigned for product: 000021090010C0400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:111]: Using cached product context: machineHi Chris,
The AIR installation log is in my original post - about 12 paras down but here is is:
[2013-04-25:06:53:46] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:06:53:46] Commandline is:
[2013-04-25:06:53:46] No installed runtime detected
[2013-04-25:06:53:57] Relaunching with elevation
[2013-04-25:06:53:57] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air79c1.tmp\adobe air installer.exe -ei
[2013-04-25:06:54:02] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:06:54:02] Commandline is: -stdio \\.\pipe\AIR_1172_0 -ei
[2013-04-25:06:54:02] No installed runtime detected
[2013-04-25:06:54:03] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:06:54:04] Installing msi at c:\users\steve\appdata\local\temp\air79c1.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:06:54:10] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Rolling back install of c:\users\steve\appdata\local\temp\air79c1.tmp\setup.msi
[2013-04-25:06:54:10] Rollback complete
[2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Runtime Installer end with exit code 7
[2013-04-25:06:54:20] Runtime Installer end with exit code 7
[2013-04-25:06:55:38] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:06:55:38] Commandline is:
[2013-04-25:06:55:38] No installed runtime detected
[2013-04-25:06:55:45] Relaunching with elevation
[2013-04-25:06:55:45] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air30fe.tmp\adobe air installer.exe -ei
[2013-04-25:06:55:48] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:06:55:48] Commandline is: -stdio \\.\pipe\AIR_1264_0 -ei
[2013-04-25:06:55:48] No installed runtime detected
[2013-04-25:06:55:49] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:06:55:51] Installing msi at c:\users\steve\appdata\local\temp\air30fe.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:06:55:55] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Rolling back install of c:\users\steve\appdata\local\temp\air30fe.tmp\setup.msi
[2013-04-25:06:55:55] Rollback complete
[2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Runtime Installer end with exit code 7
[2013-04-25:06:55:59] Runtime Installer end with exit code 7
[2013-04-25:07:05:12] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:07:05:12] Commandline is:
[2013-04-25:07:05:12] No installed runtime detected
[2013-04-25:07:05:18] Relaunching with elevation
[2013-04-25:07:05:18] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air953.tmp\adobe air installer.exe -ei
[2013-04-25:07:05:24] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:07:05:24] Commandline is: -stdio \\.\pipe\AIR_3888_0 -ei
[2013-04-25:07:05:24] No installed runtime detected
[2013-04-25:07:05:24] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:07:05:26] Installing msi at c:\users\steve\appdata\local\temp\air953.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:05:29] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Rolling back install of c:\users\steve\appdata\local\temp\air953.tmp\setup.msi
[2013-04-25:07:05:29] Rollback complete
[2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Runtime Installer end with exit code 7
[2013-04-25:07:05:31] Runtime Installer end with exit code 7
[2013-04-25:07:06:12] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:07:06:12] Commandline is:
[2013-04-25:07:06:12] No installed runtime detected
[2013-04-25:07:06:21] Relaunching with elevation
[2013-04-25:07:06:22] Launching subprocess with commandline c:\users\steve\appdata\local\temp\aire916.tmp\adobe air installer.exe -ei
[2013-04-25:07:06:32] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:07:06:32] Commandline is: -stdio \\.\pipe\AIR_5884_0 -ei
[2013-04-25:07:06:32] No installed runtime detected
[2013-04-25:07:06:32] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:07:06:33] Installing msi at c:\users\steve\appdata\local\temp\aire916.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:06:37] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Rolling back install of c:\users\steve\appdata\local\temp\aire916.tmp\setup.msi
[2013-04-25:07:06:37] Rollback complete
[2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Runtime Installer end with exit code 7
[2013-04-25:07:06:40] Runtime Installer end with exit code 7
[2013-04-25:07:26:15] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:07:26:15] Commandline is:
[2013-04-25:07:26:15] No installed runtime detected
[2013-04-25:07:26:28] Relaunching with elevation
[2013-04-25:07:26:28] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air3063.tmp\adobe air installer.exe -ei
[2013-04-25:07:26:37] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:07:26:37] Commandline is: -stdio \\.\pipe\AIR_2348_0 -ei
[2013-04-25:07:26:37] No installed runtime detected
[2013-04-25:07:26:37] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:07:26:39] Installing msi at c:\users\steve\appdata\local\temp\air3063.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:26:48] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:26:48] Rolling back install of c:\users\steve\appdata\local\temp\air3063.tmp\setup.msi
[2013-04-25:07:26:48] Rollback complete
[2013-04-25:07:26:48] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:26:48] Runtime Installer end with exit code 7
[2013-04-25:07:46:09] Runtime Installer end with exit code 7 -
Problem installing new email and calendar update o...
hello nokia, i have problem installing new email and calendar update version 3.6 (5) in nokia 701 fp2...i have download it when it appears in my software update and after download installation start and i waited for the installation to finish up but the phone switch off its self ...phone starts again n again i try to install but the phone switchng of itself ...i try many times but it didn't work...so need help guyz love nokia thnkz
Confirmed!
It's an anti-virus related issue. First tried to disable only protection, firewall, etc., but it did not work fine.
As suggested, so I deleted KMS (but keeping the application settings and objects in quarantine), and was finally able to complete the installation of the update.Then installed again KMS and everything still works fine.
No experience of Wi-Fi issues.
Nokia 700
113.010.1506.C00.01 - FP2 -
When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?
Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR -
I installed snow leopard and now videos on my Xfinity home page won't play
I installed snow leopard and now videos on my Xfinity home page won't play
You may be in the same boat as me.
I deliberately bought a refurb Feb 2011 MacBook Pro, because it would have originally shipped with Snow Leopard. I have to run an application for my job, which does not run under Lion.
Unfortunately, Apple is now upgrading all Snow Leopard machines, before selling them as refurbs. I purchased a legal copy of Snow Leopard, and have tried various downgrade solutions that I found posted on the net, without success. No matter what I do, it always goes into "three beep mode" after trying to install Snow Leopard.
The latest development came this evening, while I was talking to the "geniuses" at Apple. Apparently, there is now a firmware revision that loads the first time you run Software Update under Lion, and it locks the machine so that it can't revert to Snow Leopard.
The only option they have been able to offer me so far, is to return the machine and get a refund. This is maddening, as I HAVE to have a Snow Leopard machine, and can't find any other way to purchase one. -
Hi,
I am trying to help a friend whose graphics card has bust.
The old one was an ATI RADEON 9800 PRO-(256MB)-MAC EDITION.
I've been looking on ebay and it seems a lot cheaper to get a Mac ATI Radeon 9800 Pro 128mb Video Card For G4/G5.
Can I just swap them over? The connectors are not identical according to the photographs.
Thanks.I'd like to thank everyone for all the really useful information in this thread. It helped me solve a similar problem, which I'll describe here briefly in case it helps someone else.
I have a 2004/5 dual 2 Ghz PowerPC G5 and an Apple Cinema HD display linked, as I later found out, with the now defunct ADC connector. The display suddenly started to look like that scene in The Matrix, when code falls like rain down the screen, and I worked out I needed to replace my Radeon 9800 pro video card (I discovered the board was blue when I removed a thick layer of dust).
I took japamac's excellent advice and bought a Geforce 6800 Ultra from the linked eBay seller in Hong Kong, who delivered it extremely quickly, along with the cables to plug it into the DVD drive power source and a CD with installation instructions. It was only then that I realised the card had two DVI connectors and my display needed ADC (I hadn't understood the difference).
eBay came to the rescue again with a seller who had a secondhand DVI to ADC adapter, which Apple produced when it phased out ADC about six years ago but no longer sells. It has its own power supply and looks like a large version of the Mac laptop power cables - and has added signifcantly to the pile of spaghetti under my desk.
Installing the Geforce 6800 Ultra is fiddly, and a bit scary if you're not used to delving into the insides of a Mac, but the instructions were clear and illustrated with useful photos. The video cable has four connectors. Two fit into the end of the card, the other two (linked in a Y shape) form a bridge between the DVD/superdrive and its power cable. You have to remove the DVD drive, unplug it, and then plug one of the two Y video card connectors into the DVD power cable and the other into the DVD drive itself. Then you replace the DVD drive, plug the two remaining cable connectors to the video card and ease it into the old card's AGP slot.
Finally, with the G5 reassembled, plug the adapter's DVI connection into the back of the card, plug the Cinema Display ADC cable into the adapter block, plug the adapter's USB cable into the G5 (this enables the the USB ports on the back of the display to work), and power up.
At the time of writing, the display has been up and running for a couple of hours and all seems fine.
Thanks again everyone for all your help and advice. If it wasn't for communities like this, it would be virtually impossible to solve problems with old but still serviceable Macs. -
Win7 will not recognize my ATI 5870 video card in Bootcamp
HI,
I have a MAC pro 1.1 and I have an ATI 5870 video card. On OS 10.9.3 the mac sees the video card just fine, but when I use Bootcamp and run Win7 I can’t get the card to work properly. I tried to go to ATI and download the drivers but I keep "no such card found on your device" error from ATI or I can’t fine the correct drivers. When I run Dxdiag the video area shows me no video card information aside from this card is working properly. Can anyone assist me please?
Thank s in advance.have you tried to download the correct bootcamp driver zip for your mac and manually install the latests Radeon amd driver from that?
Apple - Support - Downloads -
Will the 5870 Video card run off...
I have a 5870 Video card in a 2012 Mac Pro using 2 power connections off the motherboard. No available power connections right now.
I need a spare power connection off the motherboard to run an Avid HDX card, (fan only), so will the 5870 Video card run ok split (Y) off one power connection?
I've got the cable, but I didn't want to just do it and ruin something.
Thanks for the help.Mac Pro community is here.
How about using serial ata power connector for Avid HDX card and motherboard 2 power connectors for graphic card, if you do not install 4 HDDs?
serial ATA power connection -
Win7 will not recognize my ATI 5870 video card on Bootcamp
HI,
I have a MAC pro 1.1 and I have an ATI 5870 video card. On OS 10.9.3 the mac sees the video card just fine, but when I use Bootcamp and run Win7 I can’t get the card to work properly. I tried to go to ATI and download the drivers but I keep "no such card found on your device" error from ATI or I can’t fine the correct drivers. When I run Dxdiag the video area shows me no video card information aside from this card is working properly. Can anyone assist me please?
Thank s in advance.A Mac Pro 1,1 technically can't run Mac OS X 10.9 without a hack. Thus it is unlikely the Boot Camp drivers Apple included for it would recognize anything on it newer than is supported. You could try using another Virtualization engine that speaks to all graphics chips with their own drivers:
https://discussions.apple.com/docs/DOC-2741 -
RADEON 9800 XT 256MB VIDEO CARD
I have a RADEON 9800 XT 256MB VIDEO CARD and when my cpu goes into sleep mode the card has a fan on it and it's still running. I checked if I had any app's still open but I don't except for Dashboard. So how can i get the video card to go into sleep mode?
[email protected]
Dual 2 GHz PowerPC G5 Mac OS X (10.4.8)offtheroad-
Do you have the CPU and monitor set to go to sleep at the same time?
Luck-
-DaddyPaycheck -
RADEON 9800 XT 256MB VIDEO CARD won't sleep
RADEON 9800 XT 256MB VIDEO CARD
Posted: Dec 8, 2006 4:21 AM
Click to reply to this topic Reply email Email
I have a RADEON 9800 XT 256MB VIDEO CARD and when my cpu goes into sleep mode the card has a fan on it and it's still running. I checked if I had any app's still open but I don't except for Dashboard. So how can i get the video card to go into sleep mode?
[email protected]
Dual 2 GHz PowerPC G5 Mac OS X (10.4.8)
Dual 2 GHz PowerPC G5 Mac OS X (10.4.8)offtheroad-
Do you have the CPU and monitor set to go to sleep at the same time?
Luck-
-DaddyPaycheck -
I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.
Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
G5 PCIe options are listed here:
http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html -
Hi all, this is my first post so plz bare with me.
I have an issue regarding a A75A-G35.
I have built a new machine today with various parts (psb) and for some reason the motherboard gives out 3 beeps with the same amount of pause between each beep when powered up. The machine powers up with no problems and nothing is burning/overly hot. I currently only have 1 brand new stick of ram in DIMM2 but the machine even fails to POST (monitor remains dead on start up) which means i can't flash bios with the new 1.4V. Please help.
Brand new parts - Spec
MSI a75a-g35
AMD Athlon 2 X 4 3000 - AD651KWNGXBOX
Corsair Vengeance 2 x 4 Gb 1600 - CMZ8GX3M2A1600C9
700w Alpine PSUQuote
The machine powers up with no problems
That statement directly contradicts this:
Quote
but the machine even fails to POST
Also:
Quote
AMD Athlon 2 X 4 3000 - AD651KWNGXBOX
You mean AMD Athlon II X4 651, which is natively supported with BIOS 1.3. What is your current BIOS version? (printed on the little green sticker on the BIOS chip, which is between the SATA1 and JFP1 headers) -
I have Photoshop Elements 11 installed but Premiere Elements will not install due to the problem installing shared technologies. I would appreciate any suggestions as to how to fix the issue. I tried the installation several times.
205EdMLewis
On what computer operating system is your Premiere Elements 11 running on? For now I will assume Windows 7, 8, or 8.1 64 bit. Are you installing the program from
an installation disc or from installation files?
The Shared Technologies error is an old story that afflicts several versions of Premiere Elements on several different computer operating systems. My encounters with this error
have been using installation disc for the program involved.
There are numerous home remedies. The one that has been working for me lately and consistently has been the disabling of the OOBE Folder which is found
Local Disk C
Program Files (x86)
Common Files
Adobe
and in the Adobe Folder is the OOBE which you disable by changing the folder name from OOBE to OLDOOBE.
Please let us know if that worked for you.
Do not give up.
ATR -
Problem installing Oracle forms and report in windows 7
I have a problem while installing Oracle forms and reports in windows 7 64 bit
The error is : [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IY5_e_EApIRMyYAhMG1BuDGr00000B,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
So I Google for it and found that this is version mismatch (May be I am wrong) and it tells that I have to install WLS - 10.3.2 with ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
But I am unable to get wls version 10.3.2.
For better understanding I am listing my installers :
(I) Windows 7 Ultimate 64 Bit
(II) (Oracle 11g) win64_11gR2_database (1 & 2)
(III) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
(IV)wls1033_generic.jar , wls1033p_generic.jar , wls1035_generic.jar
(V)accessbridge-2_0_2-fcs-bin-b06
(VI)ofm_rcu_win32_11.1.1.2.1_disk1_1of1,ofm_rcu_win_11.1.1.3.1_disk1_1of1
(VII) ofm_wc_generic_11.1.1.5.0_disk1_1of1
(VIII)jdk-6u38-nb-7_2_1-windows-i586-ml , jdk-6u38-windows-x64
(IX) oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32
(X)wls1033_oepe111150_win32.exe
(XI)wls1035_win32.exe
(XII)wls1035_oepe111172_win64
(XIII)oepe-indigo-installer-12.1.1.0.1.201203120349-12.1.1-win64
After the installation while configure the forms reports, I am stuck while creating domain.
steps I follow is :
(i) Install Windows 7 Ultimate 64 Bit
(ii) (Oracle 11g) win64_11gR2_database (1 & 2)
(iii) wls1033_generic.jar
(iv) accessbridge-2_0_2-fcs-bin-b06
(v)ofm_rcu_win32_11.1.1.2.1_disk1_1of1
(vi) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
Please any body help, for the installation of oracle forms and reports.
I have a formatted Windows 7 Ultimate
Where I have installed Adobe Acrobat Reader
IIS server from windows installer
Now I want to know the exact procedure so that i can run the forms and report in my machine.
This is my first installation of Oracle forms & Reports, so please do not pre assume about my understanding (Like "to install this he surely did this environment settings" )
Please specify all the steps
Furthermore if Another software I have to download then please tell me.
And I will be grateful if you specify the mistakes in my side.
Looking forward with anticipation.Solved, Thank you
Maybe you are looking for
-
Java program to restart failed message in Adapter Engine
Hi, I am using PI 7.0. Could anyone tell me whether there is an automated job or URL I can schedule in order to periodically resend messages sitting in the Adapter Engine receive queue that are in status System Error, Holding, or Waiting? I want to a
-
FAQ - SAP Solution Manager for VARs
You can find further technical questions around configuration & functionalities in a comprehensive FAQ to SAP Solution Manager for VARs. This FAQ covers questions and answers around: > SAP Solution Manager, enterprise edition > SAP Solution M
-
Robohelp office X5 crash with MS word
RoboHelp Office X5 The following error message often occurs when saving a RoboHelp document Word file: Visual Studio Just-In-Time Debugger An unhandled win32 exception occured in WINWORD.EXE [1496]. Just-In-Time debugging this exception failed with t
-
need help anyone encounter this?
-
PasswordDigest in the UsernameToken
Hi, I found two problems with the password digest in UsernameToken in JWSDP1.4. 1.The string "null" is included in the digest. Following OASIS Standard, the password digest is: Base64(SHA-1 (nonce + created + password)) But, from the soap message by