A7600-H Software Update

Good day,
I have been try (with no success) since yesterday late evening to update multiple A7600-H devices to android 4.4.2 (Specifically: a7600H_A442_000_016_140627_row).
Unfortunately, the OTA updates don't seem to work and neither does the Lenovo Smart Assistant.
Could anyone from the community please assist me in finding a solution to this problem, 
Lenovo customer care just keep sending me from one desk to the next with no real answer as to what is wrong.
Kind regards,
Andre
Solved!
Go to Solution.

It sounds like Lenovo's OTA servers are down at the moment.  There have been lots of reports here in the past couple days of errors when trying to update OTA or via the Smart Assistant for various Lenovo tablets.

Similar Messages

  • HT5381 i did a software update and now mail wont open at all

    Help......my mail app is coming up with an error "You can't use this version of Mail with this version of Mac OS X".  Can I uninstall the update?

    !! WARNING !!
    about the September 2012
    "Security Update 2012-004"
    If you've got "Mail.app" in a folder OTHER THAN the root "Applications" folder,
    MOVE "MAIL.APP" TO THE APPLICATIONS FOLDER
    **BEFORE** INSTALLING THE "004" UPDATE!!
    Because *IF* you use OSX's integrated Software Update app from the Apple menu to do the "004" updating, and *IF* your Mail.app is NOT in the Applications folder, then buddy, you've got some sitdown fixit time ahead of ya and/or some internet tie-up time downloading the "004" update file itself.
    Been through it all, already.  In fact, just got done getting my Mail back up & running. And I tried everything short of attempting to unpacking my "Mail.pkg" receipt file using... whatever... even Pacifist couldn't get it out. So that fixit "Plan D" died quick. And I'm not savvy enough to use Terminal commands to do "Plan E," so that SUDO stuff was my brick wall.
    So I compressed my entire "Mail" subdirectory that contain all my emails, for safekeeping during the required surgery, or whatever would work, leaving the original Mail directory where it was. In case something bad happened in all my fixit whatevers, the one thing I *didn't* want to cross paths with was a hosed Library -> Mail folder. Then I'd be pssd. But I can wipe out that ZIP now 'cause all's well now. After 6 hrs of downloading thru a mobile broadband hotspot running at only 14KB/sec speed due to my having gone over my T-Mobile hotspot plan's bandwidth amount (throttled-down after reaching the limit, tho not cut off completely. Kinda nice, but it's a huge speed drop).
    I tried moving the two Mail.app versions around, compressing them & then trashing the original so they wouldn't be recognized, blabla, even booted my Mac in Safe Mode & reinstalled the "MacOSX 10.6.8 (Snow Leopard) Update Combo.dmg" update file, which in the past has fixed many problems. But after restarting, not this one.
    Like a dummy who ignored knowing better, I had my Mail.app in a folder other than the Applications folder, with only an alias to that being in the Applications folder. NOT GOOD ENOUGH. The updater don't see that as nuthin special or useful.
    So if you've got, like I've got, "old" icons for Mail.app (v4.5) in your Finder toolbar & in your Dock that all point to "Mail.app v4.5" in whatever folder you've got that in, other than in the Applications folder (where Apple apparently REQUIRES that it be located, and ONLY there, at least for OSX updating purposes), then after you download & autorun that "004" updater using Software Update, NONE of your pre-existing Mail icons will work. And MOST aggravatingly, **NOR** will your brand-new "Mail.app v4.6" work that came out of the "004" updating installation.  So basically, your Mail.app's... all of 'em.... are hosed. But only if you run the "004" update without your "Mail.app v4.5" being located in your Applications folder and ONLY in your Applications folder. And duplicates of Mail.app, scattered around your HDD??  Always a problem with many Apple apps.... The Apple software engineers apparently like 'em to be in the Applications folder, and in ONLY there, and ONLY the latest version, and ONLY 1 single copy of each on your entire HDD. They just don't seem to stress that enough, it appears. Kind of an oversight for them to not emphasize that, IMO...
    My recommendation for this particular September 2012 "004" update:
    If you run Software Update, and if you see the "Security Update 2012-004" listed as available for download, UNCHECKMARK IT.  DO NOT DOWNLOAD IT USING SOFTWARE UPDATE !  Instead, download the actual update file itself.
    Same thing, only a different way of doing it. Most importantly, you'll be skipping the auto-installation that Software Update performs.
    AND you'll have that update file on your HDD for future fixits, should a nasty "unfixable" problem come up.
    First, #1. Do a filename search for "Mail" (Option-Command-Spacebar). Scroll down to where the "Apps" are located in the list under the "Kind" column heading. First, find your Mail.app that's v4.5. Get that bugger into your Applications folder if it's not already there. Next, Trash all other "Mail.app" apps you see in that same list that you may have elsewhere on your HDD.
    #2. Go here: https://support.apple.com/kb/DL1586
    And download the actual "004" DMG update file: "SecUpd2012-004.dmg"
    And of course, it's a biggie.... 270MB... so watching grass grow may be involved here if you've got a slow connection (go to a MacDonalds & do it, like I shoulda done).
    3. After downloading, I'd recommend closing down all apps, emptying the Trash, and restarting.
    Then, after restarting, run Disk Utility's "Repair Disk Permissions."
    Then, doublecheck that the Mail.app version 4.5 is in your Applications folder.
    THEN fire up & install "SecUpd2012-004.dmg."
    Reboot.
    After the reboot, your Mail.app version 4.5 in the Applications folder will have become Mail.app version 4.6 in the Applications folder, and all will be well again.
    And you can dump that zipped-up "Username -> Library -> Mail" folder then, too.
    Happy Mac'in!
    Kevin Kendall
    Macbook 7,1
    (Apple's very last all-white Macbook model)
    2.4GHz - 256GB Crucial SSD - 8GB Crucial RAM
    OS 10.6.8 Build 10K549 + Win 7 Ultimate thru VMWare Fusion v5.0.1

  • I keep being asked to update my Safari but when I do a Software update it scans but never gives me a list and just says no new updates. Help please!

    I keep being asked to update my Safari but when I do a Software update it scans but never gives me a list and just says no new updates. Help please!

    There are no updates to either OS 10.5.8 or Safari 5.0.6.
    If you need a later version of Safari you must first upgrade your operating system to a later version of OS X.

  • How can I see up AppStore/Software Updates for multiple computers using the same account?

    I have several computers in my household which all use the same App Store account for purchases & software updates. How can I view all those installs while not being in front of all computers?
    Recently an iMac crashed from a software update. I want to see what installed & crashed it.

    Launch the Mac app store on the computer you want to update.
    To use your Apple ID at the Mac App Store
    Choose Store > Sign In from the App Store menu.
    Enter your Apple ID and password, then click Sign In.
    Then redownload Lion.

  • Remote Desktop and Doing System / Software Updates

    I am new to Remote Desktop.  I am starting to use it daily in my class room to share things with students and lock screens, etc.  Is there an easy way to do system updates and software updates (adobe flash player, java, etc.) without having to manually log in to each machine?  I have to believe there is a better way...could someone point me in the right direction?  Thanks!

    Oh, my version of Remote Desktop is 3.7.2

  • Error message with Software Update

    Hi everyone. I'm getting the following error message when trying to download some items via Software Update:
    "None of the checked updates could be saved. A networking error has occurred: Cannot open file (-3001). Make sure you can connect to the Internet, then try again."
    This is for the following downloads:
    iPhoto 7.1.4
    iDVD 7.0.2
    iMovie 7.1.4
    Security Update 2008-005
    Any ideas? I have no problems with Internet access at all. I'm running a new 24" Intel iMac 3.06 GHz with Mac OS 10.5.4
    Thanks for any help you can provide.
    Bruce

    Hi baltwo.
    I was able to manually download the iPhoto, iDVD and iMovie updates from the Apple website and install them with no problem.
    After I downloaded the Security Update 2008-005 and tried to install it I get the following error message:
    "You cannot install Security Update 2008-005 (Intel) on this volume. This volume does not meet the requirements for this update."
    Is this why the other downloads were prevented? I've never had problems with Software Update before.
    Bruce

  • My iPhone 5 is not being recognized by my Onkyo TX-8050 reciever when plugging into the USB.  Is there a setting on my phone i need to set?  Also, it has worked prior with this receiver however after the new software update will not work.

    I am trying to hook up my iPhone 5 to my Onkyo TX-8050 receiver and it is not recognizing the phone. It recogized my phone prior to software update 7.1.2 and I can use an iPhone 4 and iPad with no issues.  Is there a setting I need to apply for the reciever to recognize?

    Im presently on the Phone with Apple the Lady Im talking to understands its the id and not the password. I finally got somebody that listened to me. Wow and she is plesent to talk to.

  • Since installing new software update, my iphone 4S no longer is recognized by itunes

    I installed the new software update to my Windows PC and my iphone and now my iphone 4s is no longer recognized by itunes and I cannot sync.  I already attempted unintalling itunes and reinstalling it - it didn't work.

    Hello KatieJean123,
    It sounds like your phone is not recognzied in iTunes anymore. I recommend the troubleshooting steps from the article named:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Here is an overview of the troubleshooting to be done:
    1. Update iTunes
    2. Check the USB cable
    3. Verify that Apple Mobile Device Support is installed
    4. Restart the Apple Mobile Device Service
    5. Verify that the Apple Mobile Device USB Driver is installed
    6. Check for third-party software conflicts
    If the issue persists, try uninstalling iTunes and its associated apps with either of these two articles depending on your operating system version and its associated softwares:
    Removing and Reinstalling iTunes and other software components for Windows XP
    http://support.apple.com/kb/ht1925
    Or
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Software for HP Color LaserJet CM1312nfi MFP is not currently available from the Software Update server.

    I recently upgraded to Mountain Lion, and found that I could no longer print to  my HP CM1312nfi.
    This is usually a problem with HP at every upgrade, but this time, they appear to have offloaded the driver download process to Apple.
    My printer is connected wirelessly through a time capsule by IP address—the physical, not the virtual, e.g: 169.254.xx.xx instead of 10.0.1.x.
    When I try to download the driver by bonjour or IP, I get the following error message:
    Can't install the software for the Hewlett-Packard HP Color LaserJet CM1312nfi MFP because it is not currently available from the Software Update server.
    Is this truly a Software Update server error, and if so, any clue when it will be resolved?
    I am able to print with the generic driver as of now, but fax and scan capabilites are gone. The add fax dialog  lists no devices.
    Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?
    Thanks for your time and attention.

    Of course, once I posted this, I tried again and downloaded the driver without issue.
    My second question still stands, however:
    Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?

  • Can't install printer driver: HP Color LaserJet 2605dn drivers "not currently available from the Software Update server"

    I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it.  When I try add the printer I get this message:
    Software for this printer is available from Apple. Would you like to download and install it?
    After clicking Download & Install (the only option other than Cancel), I get this:
    Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
    What's the workaround when Mountain Lion can't find the driver?
    Thanks!

    Sean L. wrote:
    I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it.  When I try add the printer I get this message:
    Software for this printer is available from Apple. Would you like to download and install it?
    After clicking Download & Install (the only option other than Cancel), I get this:
    Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
    What's the workaround when Mountain Lion can't find the driver?
    Thanks!
    The 2605dn has dual Network and USB connectivity. Which are you attempting to configure: Network or attached USB?
    Printer on, and if networked, use a static IP address
    Print & Scan
    IP
    Provide printer static IP address
    Select Printer Software ... HP Color LaserJet 2605dn driver (not sure about that 2600 driver)
    Add
    Configure Driver under Options and Supplies
    I have a 1994 HP Laserjet 4m Plus set up using these steps and the appropriate driver. I just added another network printer, using the same IP address, but using the above 2605dn driver without any issue other than complaint about a redundant IP address.
    Hopefully, you have already sorted this out.

  • Macbook will not boot up after running Software Update (Couldn't fix it)

    Hi there,
    I also have been experiencing some problems after running Software Update (Security update + Java) a couple of days ago. Similarly to Jandaf (http://discussions.apple.com/thread.jspa?messageID=9000023) I have only the gray start up screen + Apple logo + gear wheel constantly rotating. Based on the information provided in this forum I have tried some procedures which didn't solved my problem so far. Below I describe I have tried:
    1) I have booted using the installation DVD and run the disk utility. When performing the First Aid/Verify Disk I found some errors ('Invalid node structure'). But I couldn't fix the problem using disk repair (same problem 'Invalid node structure' 'Volume check failed'.
    2) I also tried to boot in single user mode (command + s) to run fsck -fy. It didn't work. I got the following message (last 4 lines):
    CSRHIDTTransitionDriver::probe: -s
    CSRHIDTTransitionDriver::probe: booting in single user .. do not match
    Extension "com.apple.driver.AppleUSBTCKeyboard" has no kernel dependency.
    Extension "com.apple.driver.AppleUSBTCEventDriver" has no kernel dependency.
    3) When trying to boot in safe mode. I got a grey screen with the following message:
    'You need to restart your computer. Hold down the power button for several seconds or press the Restart button".
    4) I also tried to 'Archieve & Instal'. Again no success. After reading the DVD the action is terminated because some errors (does not specify).
    5) I also tried the 'German Medicine' (http://discussions.apple.com/message.jspa?messageID=8728797#8728797) (i.e. Connect the 'problematic MacBook' to my old G4 via firewire and reinstall the 2009-001 update). Again no success. The G4 cannot mount the MacBook hardrive.
    I don't know what to do any more.
    A) Can I resuscitate my old system? If yes how?
    B) If not, can I at least save the data I have in my old HD?
    C) Is it possible to format and reinstall the OS or is this this computer doomed?
    Apologies for writing so many questions but I'm really freaking out!
    Thank you.
    B.

    Hi BDAqua,
    I did as you said and got a firewire backup drive (Seagate - FreeAgent Desk 500GB). I tried to make a carbon copy of HD but it seems that the copy had some problems. Below I report both the CCC and console logs:
    1) "Cloning method: Backup everything
    Delete items on target that aren't on the source: No
    18:23:39 Enabling ownership on the target volume...
    18:23:50 The target volume has ownership enabled.
    18:23:50 The target volume has Access Control Lists enabled.
    18:23:50 Authenticating...
    18:23:50 Initiating synchronization engine...
    18:23:51 Cloning...
    18:31:20 rsync: readdir("/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj"): Input/output error (5)
    19:04:41 rsync: readdir("/System/Library/Components/AudioCodecs.component/Contents/Resources/Fr ench.lproj"): Input/output error (5)
    19:05:41 rsync: readdir("/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj"): Input/output error (5)
    19:06:01 rsync: readdir("/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj"): Input/output error (5)
    19:07:05 rsync: readdir("/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBC DCECMData.kext/Contents/Resources/French.lproj"): Input/output error (5)
    19:10:13 rsync: readdir("/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Resou rces/French.lproj"): Input/output error (5)
    19:50:10 rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2] (51)
    19:50:11 rsync: Some errors were encountered during the backup., Error code: 51
    19:50:14 Sync Engine warnings: (
    "rsync: readdir(\"/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/Components/AudioCodecs.component/Contents/Resources/F rench.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSB CDCECMData.kext/Contents/Resources/French.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Reso urces/French.lproj\"): Input/output error (5)",
    "rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2]"
    2) "Mac OS X Version 10.4.11 (Build 8S2167)
    2009-03-01 10:30:14 +0100
    2009-03-01 10:30:21.962 SystemUIServer[213] lang is:en
    Mar 1 11:20:32 Bs-Home-Mac /usr/sbin/ocspd: starting
    Mar 1 11:38:25 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 12:46:40 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 13:54:55 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 15:03:13 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 16:11:31 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 17:19:46 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Main starting
    2009-03-01 17:47:20.393 Skype[313] SkypeApplication::init called
    2009-03-01 17:47:21.554 Skype[313] SKInitDebugLogging
    2009-03-01 17:47:46.169 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
    2009-03-01 17:47:47.208 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
    Starting the process...
    2009-03-01 17:48:36.186 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
    2009-03-01 17:48:36.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
    2009-03-01 17:48:37.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
    2009-03-01 17:48:37.369 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
    2009-03-01 17:59:16.450 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
    Mar 1 17:59:19 Bs-Home-Mac crashdump[355]: Skype crashed
    Mar 1 17:59:20 Bs-Home-Mac crashdump[355]: crash report written to: /Users/bernardolima/Library/Logs/CrashReporter/Skype.crash.log
    Mar 1 18:23:50 Bs-Home-Mac authexec: executing /Applications/Carbon Copy Cloner.app/Contents/Resources/helper_tool
    Mar 1 18:28:01 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Main starting
    2009-03-01 18:41:03.154 Skype[393] SkypeApplication::init called
    2009-03-01 18:41:12.433 Skype[393] SKInitDebugLogging
    Mar 1 19:36:16 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 19:55:54 Bs-Home-Mac mdimportserver[480]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2746
    Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
    Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
    Mar 1 20:44:34 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 21:52:51 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 23:01:07 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor"
    Due to my lack of knowledge I can't judge how bad this is. But I can tell you that every time I read the word bad in the log it scares the s*** out me.

  • 10.5.8 Server Software Update Server and 10.6.4 clients getting error

    I’m running Software Update Server on an Intel XServe 10.5.8 OS.
    When I try to run software update from 10.6.4 client I get the following error:
    +The Software Update Server (su.MYSERVERNAME.org) is not responding.+
    +Check to make sure your network connection is operating normally. If there are no issues with your connection, contact your network administrator for assistance.+
    In Workgroup Manager I’ve set up 3 groups: Tiger Clients, Leopard Clients, and Snow Leopard Clients.
    In Workgroup manager I’ve set each groups SUS to the corresponding sucatalog.
    Tiger Clients
    'http://su.MYSERVERNAME.org:8088/index.sucatalog'
    Leopard Clients
    'http://su.biggerhammer.org:8088/index-leopard.merged-1.sucatalog'
    Snow Leopard Clients
    'http://su.MYSERVERNAME.org:8088/index-leopard-snowleopard.merged-1.sucatalog'
    I’ve read multiple threads trying to sort this out.
    I’ve set each group up according to the managed clients instructions in this article. I’m led to believe this should work with 10.5.8 as well.
    http://support.apple.com/kb/HT4069
    Any ideas where this is going wrong?
    Or are there any additional steps needed to tell the 10.5.8 server how to serve to 10.6.4 SU clients?
    Thanks!

    I have seen this behavior when trying to modify the default certificate. It will not allow the key length to changed from 1024 to 2048. However, when creating a completely new certificate I have never had this issue.

  • And need the new iTunes 11.1 to be able to use my iPhone on iTunes but I need the new mac software update OXS 10.6.8, but my mac doesn't need or have an update what should I do! I'm upset :'(

    and need the new iTunes 11.1 to be able to use my iPhone on iTunes but I need the new mac software update OXS 10.6.8, but my mac doesn't need or have an update what should I do! I'm upset :'(

    The requirements for iTunes:
    Macintosh System Requirements
    Mac computer with an Intel Core processor
    OS X version 10.6.8 or later
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store
    Your Mac must be able to run OSX 10.6.8. If you can run that OSX then you can run iTunes 11.1.
    Which Mac do you have?
    MJ

  • Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

    Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

    Download the Brother Mountain Lion drivers here.

Maybe you are looking for