A77ii "Camera Error: turn camera off then on" started with all lenses, SD cards and batteries. :(

This error just started yesterday with my A77ii. The shutter will take one picture, then freeze with this error, which doesn't even go off when I turn the power off. It stays on for 5 minutes or so before it finally shuts down. Same problem with all lenses, batteries and different SD cards. Do I have a bad board? Fortunately I'm within the year warranty. Any suggestions? thanks in advance

Hi stewsir,
Welcome to the Sony Community!
Sorry to know that you are experiencing this issue with your camera. You can do a power reset in the camera by removing the battery and have the camera turned on for at least a minute. Reinsert the battery back and turn it on. Check if you still see the error message.
If the message still appears in the screen and the camera still freezes, I would recommend sending the camera in to http://repair-camera.com/SonyRepairHome.aspx for evaluation and repairs.
If my post answers your question, please mark it as "Accept as Solution".
Thanks
Zander

Similar Messages

My iPhone 3g has 2 white horizontal lines i don't know where did it came from. I turn it off then on but its still there. the lines spreads everyday. I dont know how to fix it. need some help guys.

my iPhone 3g has 2 white horizontal lines i don't know where did it came from. I turn it off then on but its still there. the lines spreads everyday. I dont know how to fix it. need some help guys.

If you take a screenshot (Press the home button and Lock button at the same time), does it appear on the screenshot? Zoom in on the screenshot and see if it's still there.
If not, then your display is failing. I would recommend taking it to an Apple Store if you can, if you can't then to an authorised Apple reseller.
If it does appear on the screenshot when you zoom into the spot, then it's a really weird software issue! You might have to backup and restore the device.
Let me know!
xeni

Officejet Pro 8625 Printer Error Please turn printer off, then on

Upon power up and connection to wiFi all appeares to be functioning properly. Can even e-print. All is still well when printer goes to sleep (will wake-up and e-print). After about 10-15 minutes will get a white screen with an message "Printer error Please turn printer off, then on" all other lights are flashing including power button. I have tried updating windows and print drivers. This first happened about two weeks ago. After updating print drivers all appeared to be well until three or four days ago then it has all started again. HELP PLEASE

Dear ChristineChandl,
Please follow the steps of this document:
http://support.hp.com/us-en/product/HP-Officejet-Pro-8500-All-in-One-Printer-series---A909/3752454/m...
I hope you find it helpful.
Greetings.
* I am not an employee of HP, my work is voluntary.
If this answer was helpful and clarify or resolve your problem, please mark the issue as resolved and click my star next to give a kudo as thanks.
I am not an employee of HP, my work is voluntary. If this answer has been helpful and clarifies or solves your problem, please click the button
and click on the icon if you want acknowledge the assistance.

Photosmart 7520 error. there is a problem with the printer. turn printer off then on.

I have a photosmart 7520 experiencing the following issues.
Problem #1: Randomly all the lights start to blink off and on and the display reads the following :
Error . There is a problem with the printer. Turn printer off then on.
I cannot find any one action that triggers this to happen.
Problem #2: When the printer is turned on and idle, also at RANDOM times, the printer will "Ding" followed by the wireless light blinking. Then what sounds like the cartridges being cleaned, then a sound like the feeder spinning or the print head running full track from side to side, then ending with a "Ding" and then returning to normal.
When this occurs, the wireless connection is disconnected then reconnected. Also this Disables the "Scan to computer" function to all the computers on the network and requires manually re-enabling all .
From what I can tell the printer is restarting itself.
It is plugged directly into the wall outlet, no surge protector.
Tech support has already run me through the clean the print head steps, escalated me up the chain, and ultimately replaced the printer with a brand new one.
THE NEW PRINTER IS DOING ALL THE SAME THINGS AS THE PREVIOUS ONE.
This printer is connected wirelessly to a Netgear N900 router. My computers all running Windows 7, all are on the same network and workgroup and all are running Mcafee Total Protection.
If anyone is or has experienced the same or similar problems, I could sure use some help.
This question was solved.
View Solution.

How did you fix this?
I replaced an HP printer recently for a new Photosmart 7520 after a complete ink container emptied into the printer.
The old printer sometimes had difficulties switching it on and the new printer has the same problem.
Also the wireless connection regulary drops and can only be reenabled by switching of the printer and switching it back on, only this sometimes takes more than ten minutes before a simple push on the power button is translated in a power on of the printer.
Since the previous printer also suffered from these "power" issues, I think the problems are power related, but I have to check this first before I can say anything more about this.

Hp officejetpro 8500A Plus printer error says to turn printer off then on - all lights blinking

I am receiving an error (no number). The message says to turn printer off then on again, all lights are blinking on and off. After
turning printer on and off it is ok for a short period then the error starts all over again and I have to turn the printer on and off again.

I have the exact same problem and I am on my second on of these printers! I am so frustrated! Anyone have a fix????

Facetime will not activate on my iphone 5. Screen says "waiting to activate". Tried turning it off then on to no avail. I'm on wifi.

Facetime will not activate on my iphone 5. Screen says "waiting to activate". Tried turning it off then on to no avail. I'm on wifi.

That was the first thing I tried and all that happened was it took a picture of the screen (I saw that in my photos folder when the phone finally came back to life).
I tried again with syncing it in itunes and it took a while but eventually it kinda reset itself and I did have to redo the set up again but it's working fine now.
And surprisinly none of my data/pictures was lost which was odd as I heard that doing the restore would delete it all.
Thankfully it's sorted out now. Was really worried for a second that something was seriously wrong. I've only had this phone for 3 months so it would have been awful having to pay for a replacement.

TS2771 My ipod touch 4g doesn't work i didnt have charger at first and when my cousins came over i charged it with his it was full and the next minute it was empty. it gave me the warning sign. After tht it shut off and i ot my charger today and it wont t

My ipod touch 4g doesn't work i didnt have charger at first and when my cousins came over i charged it with his it was full and the next minute it was empty. it gave me the warning sign. After tht it shut off and i ot my charger today and it wont turn on it also gave me a blue light which was kinda like an electric shock. Someone help plz

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Designjet T520 Turn power off then on

We are getting the error message "Please turn Printer off, then on" We have turned it off multiple times & disconnected the power but every time it comes back on the same error message appears. What do we do?

Hi,
Follow the document below in order to resolve the issue:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01369982&cc=us&dlc=en&lc=en&product=3575276&tmp...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

IPod shuffle 2nd gen only plays 15 min then stops. I turn it off then back on. It thens plays 15 min then stops. What can I do to fix this?

2nd gen iPod shuffle stops during play back every 15 min. What can I do to fix it? I turn it off then back on, but it still only plays 15 min then stops.

Thank you....I have tried a few things but I will try to reset and restore.
lllaass wrote:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
lllaass wrote:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My computer is running SO slow. The intermet also keeps freezing up and I have to turn airport off then back on/refresh before it will work again. I dont have enough space on my start up disc to run certain programs. Easiest way to fix?

My computer is running SO slow. The intermet also keeps freezing up and I have to turn airport off then back on/refresh before it will work again. I dont have enough space on my start up disc to run certain programs. It will say I need to quit programsin order for things to run. Easiest way to fix? Im not great with computers!
Running mac os x version 10.6.8

Easiest way is to have an external drive to which you copy the things you store like pictures, movies, and music
which take up a lot of space. Then delete them fron the main drive and clean it up with one of the maintenance utilities. You can readily access the external drive's contents whenever you wish.
http://lifehacker.com/5814440/what-kind-of-maintenance-do-i-need-to-do-on-my-mac
http://mac360.com/2008/07/the_top_7_free_utilities_to_maintain_a_mac/

Each time I try to access music and photos on Apple TV it asks me to turn sharing on in iTunes. When I go to sharing it says it's on and I have to turn it off then on again to get it to work. Is there a way to avoid this?

Each time I try to access music and photos on Apple TV it asks me to turn on sharing. Sharing is on and I have to turn it off then turn it on again to get it to work. Is there a way to avoid all this work every time I wish to play iTunes through my TV?

Welcome to the Apple Community and a merry Christmas.
Start here, and reset your security questions, you will receive an email to your rescue address, use the link in the email and reset your security questions.
If that doesn't help or you don't have a rescue address, you might try contacting Apple throughiTunes Store Support

TS1398 3GS IPhone will not recognize a Wi-Fi connection at home or work. We have tried turning it on/off as well as turning airplane mode to on while turning it off then back on again. My 3GS IPhone is working fine with our router at home. Thanks

My husband's 3GS IPhone will not recognize a Wi-Fi connection at home or work. We have tried turning it on/off as well as turning airplane mode to on while turning it off then back on again. My 3GS IPhone is working fine with our router at home. Please advise what our next step should be. Thank you for taking the time to read this post!!

Just to double check you tried eveyrthing take a look at this link http://support.apple.com/kb/TS1398 .
Can also try powering off the home router, then the phone, and then power up the router wait for the signal and then power up the phone and see if he can connect.

Hi there i just am in the process of ordering creative cloud and i went to press the confirm button with all my details in and then a message came up saying ' Payment System Unavailable' Just wondering what i do?

Hi there i just am in the process of ordering creative cloud and i went to press the confirm button with all my details in and then a message came up saying ' Payment System Unavailable' Just wondering what i do?

I am encountering the same problem and I can not find the answers.I don't know what to do anymore.I am in Japan and i tried to call the numbers provided and it is in japanese.I can't understand..I hope someone here would help us.

My Iphone 5s message is showing it has a message but it doesnt. ive cleared out all messages, ive turned it off then on again how do I get rid of it with out having to reset my phone?

My Iphone 5s message is showing it has a message but it doesnt. ive cleared out all messages, ive turned it off then on again how do I get rid of it with out having to reset my phone?

just do a reset, you lose no data.
hold down the home/sleep button together until you see the apple logo and then release.

HT1338 When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed and remains as if the computer is now Frozen. Mac book Pro leopard operating system. What can I do to get past the freeze?

When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed and remains as if the computer is now Frozen. Mac book Pro leopard operating system. What can I do to get past the freeze?

Could the disk have failed?
Can you hear it?
Boot from the install DVD and see what Disk Utility says.

A77ii "Camera Error: turn camera off then on" started with all lenses, SD cards and batteries. :(

Similar Messages

Maybe you are looking for