A8-50: problems with GPS

I have a lot of problems with the GPS of my Lenovo A8-50. I update it to Android 4.4.2 and it takes too much time to locate me (I'm talking about 1 hour or more, sometimes more than one hour and a half). What can I do to solve it?
Thanks.

I have Yoga 8 tablet (B600). I really love this tablet. but my gps doesnt work
I installed "GPS status and toolbox" but the problem still exists

Similar Messages

Problem with GPS on Nokia Ovi Maps

Hello everybody! I have a problem with GPS on my Nokia E90. Please can anybody help me with this problem. When i try to find my location using GPS with Nokia Ovi Maps the program show me a table like in the picture, but if i use Google Map the GPS work fine.
Please can anyone help me to fix this problem??? Thanks!
Solved!
Go to Solution.
Attachments:
Scr000016.jpg ‏152 KB
Scr000015.jpg ‏189 KB

Some days ago i just format my mobile but till now the GPS on Nokia Ovi Maps wokrs fine. I just don't know why after i format my mobile the Ovi shows me this message.
When i go to Menu -> GPS -> GPS Data -> Navigation -> Options -> Satellite status, my phone shows me this mesage:
1-st image is when i am inside of my room and
2-nd image is when i am outside of my room.
Can you tell me what does this message mean???
Anyway thanks man for your help!
Attachments:
1-st image.jpg ‏59 KB
2-nd image.jpg ‏62 KB

N95 8gb Problem with GPS in US.

Hi. I just brought nokia n95 8gb(Singapore model). I just updated my cell to 11 firmware. Now i have a big problem with GPS. I can find some satellites but i cant establish connection with them. How i can fix this problem? All the time if im going to google maps for example i can only see yellow blinking(satellite search) ...it never turns green...And i'm living in USA,New York. I tried differenet places and it doesnt work..Singapore phone doesn't work properly in US?

Yeaaaaah i fixed the problem by myself. Make sure everybody check in GPS data>Options>Positioning settings> that you disable bluetooth GPS and Network based. Yessir.U can close this topic.

N97 Problem With GPS Singnal

Hi evry one
my problem with GPS signal when i open my OVI Maps there is no signal from sat
and i can't use the nav or maps pls if any one have any answer plz replay this topic
thnx.

Do you have the local Map data installed on your handset ? Having the data pre-installed on the handset does allow navigation without a data connection, but when only using gps, it can take a while for the initial 'lock' to the satelites (up to 20 minute with a clear view) then after the initial lock it should locate uoi more quickley. The whole system works better with assisted gps and uses very little data, but if you have the latest verion of maps with the pre-installed map data it should work offline !
http://betalabs.nokia.com/apps/ovi-maps-for-mobile-v3-06-check-in-update/download_and_installation
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Serious problems with GPS on BB Leap with OS 10.3.1

hii have 3 problems with my BB Leap; for 1 of it i write here to find a solution.when i enter on BB Maps (installed by default) with Location and Wi-Fi activated, my location always show that i am somewhere in Basel (Switzerland), even if i live in other European country. I searched the settings, and i do not find anywhere any presetted location. Isn't it very strange that the GPS is not able to find my REAL location? Please let me know what can i do to be rightful spotted. the other secondary problems I hope will be solved with upgrades:1. the keyboard sound can not be totally reduced, even if the sound setting is at minimum.2. the camera sound has no setting to kill the noise when shooting. thank you.

when i will check Location under the clear sky i will post here the experience. i am situated in romania, and there are big problems with the recognition of the streets.[meanwhile i think later to install the Google Maps after installing "cobald" ''s files or Snap; i still have to check if trustable]. concerning the sound of the typing from the keys, it is my English, sorry; i've said i setted to "maximum minimum" in the way that i setted the sound line to the maximum left, that is totally minimum.[please let me know where should i address a SUGGESTION for the next UPDATE, concerning the totally noise reduction of the keytyping and of the camera; there are numerous situations when you need to be completly silent when typing and shooting; i don't know what was in the head of the programmers ]. another thing that i experience right now is the battery drain. i still have to wait a little before asking why do BB say is 25 hours, and after charging the meter say 15 hours with all the apps, wi-fi, location, etc . closed. i still have to experience the battery situation, cause i feel it goes bye too soon...

Problem with GPS in my 5800

I have proble with GPS , After update my phone this service was working and I do some change in internet setting in my phone becase it was log to net with auto way so I change the access point to wrong number to disconnect to net with auto way
after this change the GPS work one time and didnt work after that .
--Dose this service need net to work ?
-- If no how i get it work again ?
PLZ I need this service in my phone so much becase sometime I drive my car in new places and I use it very hard
PLZ help my

Go to Maps-->Spanner Icon-->Internet-->Connection...set to OFFLINE
Also.. Menu-->Applications-->Location-->Positioning-->Positioning Methods.. select ONLY integrated GPS
BTW to prevent auto connection to Internet..
Menu-->Settings-->connectivity-->Admin Settings-->Packet Data-->Packat Data connection...set to When Needed
..and also..
Menu-->Settings-->Connectivity-->Destinations-->Internet.. select the Access Point-->Use Acces Point (At extreme bottom).. set to After Confirmation..

Problem with GPS on Nokia 5800

Some days back i had big problem in getting GPS work to get my current location. I followed some intsturctions provided by one of the forum members and it seems to have worked.
Now the problem is, even when i am in the open area where satellite status shows more than 5 available, i am unable to get a lock on my current position. Instead i get "GPS works poorly on indoors..." message. My mobile is still under warranty. Should i need to go and check with Nokia Care center? or is this could a confiugration problem?
i have Assisted, Network and integrated enabled and have GPRS enabled.
Any help would be realy apprecieated
Not to mention, i am on 4x firmware with latest Maps software and also have downloaded India Maps using maps downloader
Cheers
Karthik

KarthikK wrote:
Now the problem is, even when i am in the open area where satellite status shows more than 5 available, i am unable to get a lock on my current position. Instead i get "GPS works poorly on indoors..." message.
Hi KarthikK
This message sounds as if device can't communicate with the "Positioning server" so I would check that it is "supl.nokia.com" and confirm in Destinations > Internet that your desired network access point is prioritized.
Latest Nokia Maps v3.04Beta also utilizes an additional positioning method, Wi-fi/Network to speed up positional fix especially indoors as per screenshot:http://i43.tinypic.com/2mrcq68.jpg
Happy to have helped forum in a small way with a Support Ratio = 37.0

N86 problem with gps after firmware update

J2ME-apps crashes or hangs with external gps after upgrade to firmware 30.009. This worked before the update.
The phone is a N86 RM484 and external GPS is a Globalsat 359.
The apps in question are GC LIve (http://live.geocaching.com/dl) and a homebrewn app.
When using external gps I only have "external gps" activated in "positioning methods". When using internal gps all options EXCEPT external gps are activated.
"OVI Maps", "Google maps" and "GPS status" all work fine with external GPS.
I've tried to reset the phone with three different methods but none fixes the problem. Methods I've tried: *#7780#, *#7370# and the acrobatic 4-button combo.
I'm all out of ideas, and hope someone has a solution. / Richard

Hi again!
I've used ovi suite to reinstall prior to a reset, and also after a reset. It makes no difference to the problem
What would happen if I wiped the entire built in mass storage (E? There's lots of folders and files there that seems to be untouched regardless of reset method. Could it make things worse?
Other ideas very welcome!
I'm not at all interested in demo versions of games that come bundled with this phone and all private stuff is backed up.

Problem with GPS in Nokia 5800

I'm in Nokia Maps, I click in "my position" and it shows me the red dot in south of Portugal (Algarve). Well, that would be cool if I were there, but I'm not! I'm in the north (Braga). I want to connect via sattelite and not via internet, cause I want to use it when I'm driving. Can somebody help me?

Hi gui94
If you won't give the Assisted GPS feature a network internet connection albeit to download 7 kb of data then your first fix is going to take longer to achieve and would suggest you go outside away from tall buildings preferably with clear view of sky.
The position achieved using the Network GPS (cell tower location) can sometimes be well off the mark unfortunately but not usually by that much and then you will get a "Black ring" around the centre when locked on to position at which time you will see next to satellite icon green bars instead of yellow.
Happy to have helped forum in a small way with a Support Ratio = 37.0

E52 problem with GPS

After updating software to 054.003. version I am unable to open navigation and install any other updates using Ovi Suite. Any ideas?

There is a new positioning method with V3.04 called wifi positioning and this seems to be causing problems for some. It should work once you disable this.

A Problem with GPS navigation

the satellite status indicator doesn't appear on the map and the connection take along time to be established
Attachments:
nokia-ovi-maps-enhanced-th.jpg ‏47 KB

Hi mostafagouda
Please be aware that "green satellite meter" is no longer a feature of OVI Maps v3.04. Have you just updated your version of OVI Maps as you may well find that the defined network access point for the "Positioning server" has been corrupted and you are now relying solely on "Integrated GPS" feature to determine location?
Happy to have helped forum in a small way with a Support Ratio = 37.0

N82 - problem with GPS navigation

I loaded all necessary Nokia maps, and have problem.
Everything is working fine, options “route to/from” is working, simulation also, but when order “start navigation”, program immediately shutdown.
Is this problem familiar to anyone? Any experience for solution?

I've just tested it on my N82 and it works ok.
Have you tried deleting your maps and reinstalling them?
I'm using a UK N82 and the maps were pre-installed on a 2GB card when I bought it.
Firmware version is V10.0.046

My Ipad2 have problem with gps

I bay from yoar,market Igo ist Europe 39€,but gps,don't work.....why yu sel,programs....for IPad ven don't egzist GPS...

Do you have the 3G iPad? If you don't, if you have the WiFi only iPad, it does not have GPS.

Problems with applications: GPS Info QT - IM for N...

Problems with GPS Info QT: new update v1.25 (cancelled by Nokia recently) has a gap with the coordinates in longitude because the error is 1 degree 56 minutes more or less (big problem). But it is an excellent applications: when can we obtain it again?
Problems with IM for Nokia: it has been impossible to install the updade of this application. I have installed it several times and uninstall again, but I always see the word "error".
What happens with the Ovi Maps? before I could see the satellite maps in old version (like a google earth) but when Nokia updated to version 00.02.43.117 I cannot see it. (Maybe it had errors with the Nokia Maps.
Solved!
Go to Solution.

ilema wrote:
What happens with the Ovi Maps? before I could see the satellite maps in old version (like a google earth) but when Nokia updated to version 00.02.43.117 I cannot see it. (Maybe it had errors with the Nokia Maps.
Only for larger conurbations however:
Happy to have helped forum with a Support Ratio = 42.5

Problems with kismet

Hi, I had problems starting kismet...
sudo kismet
Launching kismet_server: /usr/bin/kismet_server
Will drop privs to koala (1000) gid 1000
No specific sources given to be enabled, all will be enabled.
Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng)
Enabling channel hopping.
Enabling channel splitting.
NOTICE: Disabling channel hopping, no enabled sources are able to change channel.
Source 0 (madwifi): Enabling monitor mode for madwifi_b source interface wlan0 channel 6...
ERROR: Unable to create VAP: Operation not supported
ERROR: Unable to create monitor-mode VAP
WARNING: wlan0 appears to not accept the Madwifi-NG controls. Will attempt to configure it as a standard Madwifi-old interface. If you are using madwifi-ng, be sure to set the source interface to the wifiX control interface, NOT athX
FATAL: Failed to retrieve list of private ioctls 95:Operation not supported
Done.
Here is my kismet.conf
# Kismet config file
# Most of the "static" configs have been moved to here -- the command line
# config was getting way too crowded and cryptic. We want functionality,
# not continually reading --help!
# Version of Kismet config
version=2007.09.R1
# Name of server (Purely for organizational purposes)
servername=Kismet
# User to setid to (should be your normal user)
suiduser=koala
# Do we try to put networkmanager to sleep? If you use NM, this is probably
# what you want to do, so that it will leave the interfaces alone while
# Kismet is using them. This requires DBus support!
networkmanagersleep=true
# Sources are defined as:
# source=sourcetype,interface,name[,initialchannel]
# Source types and required drivers are listed in the README under the
# CAPTURE SOURCES section.
# The initial channel is optional, if hopping is not enabled it can be used
# to set the channel the interface listens on.
# YOU MUST CHANGE THIS TO BE THE SOURCE YOU WANT TO USE
source=madwifi_b,wlan0,madwifi
# Comma-separated list of sources to enable. This is only needed if you defined
# multiple sources and only want to enable some of them. By default, all defined
# sources are enabled.
# For example:
# enablesources=prismsource,ciscosource
# Automatically destroy VAPs on multi-vap interfaces (like madwifi-ng).
# Madwifi-ng doesn't work in rfmon when non-rfmon VAPs are present, however
# this is a fairly invasive change to the system so it CAN be disabled. Expect
# things not to work in most cases if you do disable it, however.
vapdestroy=true
# Do we channelhop?
channelhop=true
# How many channels per second do we hop? (1-10)
channelvelocity=5
# By setting the dwell time for channel hopping we override the channelvelocity
# setting above and dwell on each channel for the given number of seconds.
#channeldwell=10
# Do we split channels between cards on the same spectrum? This means if
# multiple 802.11b capture sources are defined, they will be offset to cover
# the most possible spectrum at a given time. This also controls splitting
# fine-tuned sourcechannels lines which cover multiple interfaces (see below)
channelsplit=true
# Basic channel hopping control:
# These define the channels the cards hop through for various frequency ranges
# supported by Kismet. More finegrain control is available via the
# "sourcechannels" configuration option.
# Don't change the IEEE80211<x> identifiers or channel hopping won't work.
# Users outside the US might want to use this list:
# defaultchannels=IEEE80211b:1,7,13,2,8,3,14,9,4,10,5,11,6,12
defaultchannels=IEEE80211b:1,6,11,2,7,3,8,4,9,5,10
# 802.11g uses the same channels as 802.11b...
defaultchannels=IEEE80211g:1,6,11,2,7,3,8,4,9,5,10
# 802.11a channels are non-overlapping so sequential is fine. You may want to
# adjust the list depending on the channels your card actually supports.
# defaultchannels=IEEE80211a:36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,184,188,192,196,200,204,208,212,216
defaultchannels=IEEE80211a:36,40,44,48,52,56,60,64
# Combo cards like Atheros use both 'a' and 'b/g' channels. Of course, you
# can also explicitly override a given source. You can use the script
# extras/listchan.pl to extract all the channels your card supports.
defaultchannels=IEEE80211ab:1,6,11,2,7,3,8,4,9,5,10,36,40,44,48,52,56,60,64
# Fine-tuning channel hopping control:
# The sourcechannels option can be used to set the channel hopping for
# specific interfaces, and to control what interfaces share a list of
# channels for split hopping. This can also be used to easily lock
# one card on a single channel while hopping with other cards.
# Any card without a sourcechannel definition will use the standard hopping
# list.
# sourcechannels=sourcename[,sourcename]:ch1,ch2,ch3,...chN
# ie, for us channels on the source 'wlanngsource' (same as normal channel
# hopping behavior):
# sourcechannels=wlanngsource:1,6,11,2,7,3,8,4,9,5,10
# Given two capture sources, "wlannga" and "wlanngb", we want wlannga to stay
# on channel 6 and wlanngb to hop normally. By not setting a sourcechannels
# line for wlanngb, it will use the standard hopping.
# sourcechannels=wlannga:6
# To assign the same custom hop channel to multiple sources, or to split the
# same custom hop channel over two sources (if splitchannels is true), list
# them all on the same sourcechannels line:
# sourcechannels=wlannga,wlanngb,wlanngc:1,6,11
# Port to serve GUI data
tcpport=2501
# People allowed to connect, comma seperated IP addresses or network/mask
# blocks. Netmasks can be expressed as dotted quad (/255.255.255.0) or as
# numbers (/24)
allowedhosts=127.0.0.1
# Address to bind to. Should be an address already configured already on
# this host, reverts to INADDR_ANY if specified incorrectly.
bindaddress=127.0.0.1
# Maximum number of concurrent GUI's
maxclients=5
# Do we have a GPS?
gps=true
# Host:port that GPSD is running on. This can be localhost OR remote!
gpshost=localhost:2947
# Do we lock the mode? This overrides coordinates of lock "0", which will
# generate some bad information until you get a GPS lock, but it will
# fix problems with GPS units with broken NMEA that report lock 0
gpsmodelock=false
# Packet filtering options:
# filter_tracker - Packets filtered from the tracker are not processed or
# recorded in any way.
# filter_dump - Packets filtered at the dump level are tracked, displayed,
# and written to the csv/xml/network/etc files, but not
# recorded in the packet dump
# filter_export - Controls what packets influence the exported CSV, network,
# xml, gps, etc files.
# All filtering options take arguments containing the type of address and
# addresses to be filtered. Valid address types are 'ANY', 'BSSID',
# 'SOURCE', and 'DEST'. Filtering can be inverted by the use of '!' before
# the address. For example,
# filter_tracker=ANY(!00:00:DE:AD:BE:EF)
# has the same effect as the previous mac_filter config file option.
# filter_tracker=...
# filter_dump=...
# filter_export=...
# Alerts to be reported and the throttling rates.
# alert=name,throttle/unit,burst/unit
# The throttle/unit describes the number of alerts of this type that are
# sent per time unit. Valid time units are second, minute, hour, and day.
# Burst rates control the number of packets sent at a time
# For example:
# alert=FOO,10/min,5/sec
# Would allow 5 alerts per second, and 10 alerts total per minute.
# A throttle rate of 0 disables throttling of the alert.
# See the README for a list of alert types.
alert=NETSTUMBLER,10/min,1/sec
alert=WELLENREITER,10/min,1/sec
alert=LUCENTTEST,10/min,1/sec
alert=DEAUTHFLOOD,10/min,2/sec
alert=BCASTDISCON,10/min,2/sec
alert=CHANCHANGE,5/min,1/sec
alert=AIRJACKSSID,5/min,1/sec
alert=PROBENOJOIN,10/min,1/sec
alert=DISASSOCTRAFFIC,10/min,1/sec
alert=NULLPROBERESP,10/min,1/sec
alert=BSSTIMESTAMP,10/min,1/sec
alert=MSFBCOMSSID,10/min,1/sec
alert=LONGSSID,10/min,1/sec
alert=MSFDLINKRATE,10/min,1/sec
alert=MSFNETGEARBEACON,10/min,1/sec
alert=DISCONCODEINVALID,10/min,1/sec
alert=DEAUTHCODEINVALID,10/min,1/sec
# Known WEP keys to decrypt, bssid,hexkey. This is only for networks where
# the keys are already known, and it may impact throughput on slower hardware.
# Multiple wepkey lines may be used for multiple BSSIDs.
# wepkey=00:DE:AD:C0:DE:00,FEEDFACEDEADBEEF01020304050607080900
# Is transmission of the keys to the client allowed? This may be a security
# risk for some. If you disable this, you will not be able to query keys from
# a client.
allowkeytransmit=true
# How often (in seconds) do we write all our data files (0 to disable)
writeinterval=300
# How old (and inactive) does a network need to be before we expire it?
# This is really only good for limited ram environments where keeping a
# total log of all networks is problematic. This is in seconds, and should
# be set to a large value like 12 or 24 hours. This is intended for use
# on stationary systems like an IDS
# logexpiry=86400
# Do we limit the number of networks we log? This is for low-ram situations
# when tracking everything could lead to the system falling down. This
# should be combined with a sane logexpiry value to flush out very old
# inactive networks. This is mainly for stationary systems like an IDS.
# limitnets=10000
# Do we track IVs? this can help identify some attacks, but takes a LOT
# of memory to do so on a busy network. If you have the RAM, by all
# means turn it on.
trackivs=false
# Do we use sound?
# Not to be confused with GUI sound parameter, this controls wether or not the
# server itself will play sound. Primarily for headless or automated systems.
sound=false
# Path to sound player
soundplay=/usr/bin/play
# Optional parameters to pass to the player
# soundopts=--volume=.3
# New network found
sound_new=/usr/share/kismet/wav/new_network.wav
# Wepped new network
# sound_new_wep=/usr/com/kismet/wav/new_wep_network.wav
# Network traffic sound
sound_traffic=/usr/share/kismet/wav/traffic.wav
# Network junk traffic found
sound_junktraffic=/usr/share/kismet/wav/junk_traffic.wav
# GPS lock aquired sound
# sound_gpslock=/usr/share/kismet/wav/foo.wav
# GPS lock lost sound
# sound_gpslost=/usr/share/kismet/wav/bar.wav
# Alert sound
sound_alert=/usr/share/kismet/wav/alert.wav
# Does the server have speech? (Again, not to be confused with the GUI's speech)
speech=false
# Server's path to Festival
festival=/usr/bin/festival
# Are we using festival lite? If so, set the above "festival" path to also
# point to the "flite" binary
flite=false
# Are we using Darwin speech?
darwinsay=false
# What voice do we use? (Currently only valid on Darwin)
speech_voice=default
# How do we speak? Valid options:
# speech Normal speech
# nato NATO spellings (alpha, bravo, charlie)
# spell Spell the letters out (aye, bee, sea)
speech_type=nato
# speech_encrypted and speech_unencrypted - Speech templates
# Similar to the logtemplate option, this lets you customize the speech output.
# speech_encrypted is used for an encrypted network spoken string
# speech_unencrypted is used for an unencrypted network spoken string
# %b is replaced by the BSSID (MAC) of the network
# %s is replaced by the SSID (name) of the network
# %c is replaced by the CHANNEL of the network
# %r is replaced by the MAX RATE of the network
speech_encrypted=New network detected, s.s.i.d. %s, channel %c, network encrypted.
speech_unencrypted=New network detected, s.s.i.d. %s, channel %c, network open.
# Where do we get our manufacturer fingerprints from? Assumed to be in the
# default config directory if an absolute path is not given.
ap_manuf=ap_manuf
client_manuf=client_manuf
# Use metric measurements in the output?
metric=false
# Do we write waypoints for gpsdrive to load? Note: This is NOT related to
# recent versions of GPSDrive's native support of Kismet.
waypoints=false
# GPSDrive waypoint file. This WILL be truncated.
waypointdata=%h/.gpsdrive/way_kismet.txt
# Do we want ESSID or BSSID as the waypoint name ?
waypoint_essid=false
# How many alerts do we backlog for new clients? Only change this if you have
# a -very- low memory system and need those extra bytes, or if you have a high
# memory system and a huge number of alert conditions.
alertbacklog=50
# File types to log, comma seperated
# dump - raw packet dump
# network - plaintext detected networks
# csv - plaintext detected networks in CSV format
# xml - XML formatted network and cisco log
# weak - weak packets (in airsnort format)
# cisco - cisco equipment CDP broadcasts
# gps - gps coordinates
logtypes=dump,network,csv,xml,weak,cisco,gps
# Do we track probe responses and merge probe networks into their owners?
# This isn't always desireable, depending on the type of monitoring you're
# trying to do.
trackprobenets=true
# Do we log "noise" packets that we can't decipher? I tend to not, since
# they don't have anything interesting at all in them.
noiselog=false
# Do we log corrupt packets? Corrupt packets have enough header information
# to see what they are, but someting is wrong with them that prevents us from
# completely dissecting them. Logging these is usually not a bad idea.
corruptlog=true
# Do we log beacon packets or do we filter them out of the dumpfile
beaconlog=true
# Do we log PHY layer packets or do we filter them out of the dumpfile
phylog=true
# Do we mangle packets if we can decrypt them or if they're fuzzy-detected
mangledatalog=true
# Do we do "fuzzy" crypt detection? (byte-based detection instead of 802.11
# frame headers)
# valid option: Comma seperated list of card types to perform fuzzy detection
# on, or 'all'
fuzzycrypt=wtapfile,wlanng,wlanng_legacy,wlanng_avs,hostap,wlanng_wext,ipw2200,ipw2915
# Do we do forgiving fuzzy packet decoding? This lets us handle borked drivers
# which don't indicate they're including FCS, and then do.
fuzzydecode=wtapfile,radiotap_bsd_a,radiotap_bsd_g,radiotap_bsd_bg,radiotap_bsd_b,pcapfile
# Do we use network-classifier fuzzy-crypt detection? This means we expect
# packets that are associated with an encrypted network to be encrypted too,
# and we process them by the same fuzzy compare.
# This essentially replaces the fuzzycrypt per-source option.
netfuzzycrypt=true
# What type of dump do we generate?
# valid option: "wiretap"
dumptype=wiretap
# Do we limit the size of dump logs? Sometimes ethereal can't handle big ones.
# 0 = No limit
# Anything else = Max number of packets to log to a single file before closing
# and opening a new one.
dumplimit=0
# Do we write data packets to a FIFO for an external data-IDS (such as Snort)?
# See the docs before enabling this.
#fifo=/tmp/kismet_dump
# Default log title
logdefault=Kismet
# logtemplate - Filename logging template.
# This is, at first glance, really nasty and ugly, but you'll hardly ever
# have to touch it so don't complain too much.
# %n is replaced by the logging instance name
# %d is replaced by the current date as Mon-DD-YYYY
# %D is replaced by the current date as YYYYMMDD
# %t is replaced by the starting log time
# %i is replaced by the increment log in the case of multiple logs
# %l is replaced by the log type (dump, status, crypt, etc)
# %h is replaced by the home directory
# ie, "netlogs/%n-%d-%i.dump" called with a logging name of "Pok" could expand
# to something like "netlogs/Pok-Dec-20-01-1.dump" for the first instance and
# "netlogs/Pok-Dec-20-01-2.%l" for the second logfile generated.
# %h/netlots/%n-%d-%i.dump could expand to
# /home/foo/netlogs/Pok-Dec-20-01-2.dump
# Other possibilities: Sorting by directory
# logtemplate=%l/%n-%d-%i
# Would expand to, for example,
# dump/Pok-Dec-20-01-1
# crypt/Pok-Dec-20-01-1
# and so on. The "dump", "crypt", etc, dirs must exist before kismet is run
# in this case.
logtemplate=%n-%d-%i.%l
# Where do we store the pid file of the server?
piddir=/var/run/
# Where state info, etc, is stored. You shouldnt ever need to change this.
# This is a directory.
configdir=%h/.kismet/
# cloaked SSID file. You shouldn't ever need to change this.
ssidmap=ssid_map
# Group map file. You shouldn't ever need to change this.
groupmap=group_map
# IP range map file. You shouldn't ever need to change this.
ipmap=ip_map
I'm just not sure if the "source:" is correct...:)
Here is my lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 System peripheral: JMicron Technologies, Inc. SD/MMC Host Controller
01:00.2 SD Host controller: JMicron Technologies, Inc. Standard SD Host Controller
01:00.3 System peripheral: JMicron Technologies, Inc. MS Host Controller
01:00.4 System peripheral: JMicron Technologies, Inc. xD Host Controller
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
03:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
04:00.0 System peripheral: JMicron Technologies, Inc. SD/MMC Host Controller
04:00.2 SD Host controller: JMicron Technologies, Inc. Standard SD Host Controller
04:00.3 System peripheral: JMicron Technologies, Inc. MS Host Controller
04:00.4 System peripheral: JMicron Technologies, Inc. xD Host Controller
Thanks is advance guyz..:)

[koala@myhost ~]$ lsmod
Module Size Used by
uhci_hcd 18764 0
video 16208 0
backlight 3652 1 video
ath_pci 207800 0
wlan 186612 1 ath_pci
ath_hal 298208 1 ath_pci
ath5k 88896 0
Here is my lsmod...:)

A8-50: problems with GPS

Similar Messages

Maybe you are looking for