A889 system has stopped

When I go to system update
"Unfortunately, system has stopped"
Dialog bo Appear

Hi
You are running a custom firmware(The firmware developer probably removed or added something.That's why System Update crashes)....You won't be able to update via System Update !
Sorry.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Satellite 1130-Z24,system has stopped working altogether

Hi
My system has stopped working altogether, since it was dropped, only from a small distance though. When connected to AC power, the light work, so I suspect power is getting to it, and I suspect I have damaged either the motherboard or power supply, but I am hoping something simple. Has anybody any manuals showing how to dismantle the satellite 1130, or any other suggestions.
Kind Rgrds
Chris

Hello Chris
Unfortunately there is no official document how to disassemble/assemble your Satellite. In my opinion the best solution is to contact service partner in your country.
I am pretty sure that they can help you. Who knows which hardware part is damaged.
Good luck!

During the software update the system has stop since 14 hours ???

I recently bought a Mac Pro with 16GB and 512Gb Flash Memory ,as i retutn home and try to up date the software the system has stop since 14 hours.
I'm new to the Mac word and i would like to Know if it is normal that any Software update takes so Long time.
Thanks's
Angelo

It's something wrong, you'd better stop software update and restart update again.

System has stopped responding

Hi all,
I am loading data from R3 to BW.
Monitor shows the following Status:
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
Data packets were found that have not yet been read
Runtime is close to 6 hours now. I will appreciate your expert suggestion.
Regards,
Saurav

Hi Sourav,
As you have mentioned that the job has finished in source system, please check in WE02 in source system to see if any idocs outbound to BI system are in yellow/ red status. If any idoc is in yellow status, go to BD87 and process this idoc. If the idoc is in red status, check for the error reason.
If everything is fine in WE02, then go to SM58 in source system to check if any entries are there. If you find any entry, process them manually by executing them.
Finally, if everything is fine in source system, check in BI system in WE02 to see if all the inbound idocs are in green status. If different, please follow the same procedure as mentioned above.

LabVIEW 11.0 Development System has stopped working (happens every time I close manually)

Perhaps this issue is related to my computer only?
Does anyone else experience this when the manually close labview's "getting started" window?
All I have to do is open labview then close the window... everytime.
Here is the data dump from the crash alert window:
Problem signature:
Problem Event Name: APPCRASH
Application Name: LabVIEW.exe
Application Version: 11.0.0.4029
Application Timestamp: 4e0213b5
Fault Module Name: RpcRtRemote.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7992f
Exception Code: 80000003
Exception Offset: 00006369
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
I'm using win7 x64
Thanks
-pat

I have not seen that problem before. But I would try to reinstall/repair LabVIEW via the control panel->programs and features.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Labview 10.0.1 development system has stopped working

I am getting this cryptic message when trying to build an EXE in windows 7.
It happens right at the end of the build process when the application builder message says "saving main.vi" where "Main.vi" is the primary.
It forces labVIEW to close.
Anyone have any experience troubleshooting an error like this?
Thanks -

I am experiencing the same issue. I am no longer able to build the Host exe (i.e. an exe under the My Computer target) for a certain project. I am able to build the RT exe under 2 different cFP-2220 targets in the same project. I am also able to build the Host exe in different, but very similar projects. I can also build the exe from this exact same project on different computers that have the same installation of labview. Creating a new project allowed me to build the host when only the host part was in the project - when I added the RT target, it failed. Cleaning the old build and trying again (and again..) does not help.
I was using LabVIEW 2011 SP1, but I just upgraded to the f2 patch (which did not help). Here are the series of error messages I get:
Step 1 try to build the exe, it gets almost to the end and then freezes up:
Clicking degug gives:
Debug...
Ok...
jeffneuner - did you ever find a solution?
Does anyone have any other suggestions for debugging or getting this to work?
I don't have any experience using the LabWindows/CVI debugger, maybe there is something I can do with this?
Thanks!
Lauren

HT1923 I'm trying to re-install itunes on my laptop & I am getting a message that has stopped the re-install & it says: "Service 'Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system servic

I'm trying to re-install itunes on my laptop & I am getting a message that has stopped the re-install & it says: "Service 'Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." The diaglogue box gives me the options to abort, retry, or ignore; when I tried retry and ignore the re-install process stays stalled & the dialogue box comes back & I don't want to abort & start this all over to probably end up with the same issue; what does this mean & what do I do?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

TS1717 Ever since I downloaded and installed iTunes64Setup.exe v. 6.0.1, it crashes on my Windows 7 system, with the useless message, "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program an

iTunes64Setup.exe, even after multiple times of uninstalling and reinstalling with even a fresh download crashes with the message:
"iTunes has stopped working. A problem [unspecified] caused the program to stop working correctly. Windows will close the program and notify you IF a solution is available." I cannot get out of this loop and it renders my iPad HD useless. I tried calling the Apple Store but was referred by an automated system to this web site. I tried looking up the problem in the FAQ but it didn't help.
merylew

Hi there Nok Saensanoh,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
-Griff W.

The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, " The operation could not be completed. The system cannot find the path specified" Resetting preferences did not fix.

The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, “ The operation could not be completed. The system cannot find the path specified” Resetting preferences did not fix.

my os is windows 7. elements 12 worked fine for many months then save for the web stopped working

I have the lastest (10.7) I tunes software running on a 64 bit windows 7 system. Today it stopped running all of the tv shows I have downloaded. The error message says that a "problem has stopped i tunes from working and windows is shutting it down" ?

i have the latest (10.7) itunes installed on a 64 bit Windows 7 based system. Up unitil today I had NO problem running the TV shows that I have downloaded from I Tunes.
Today it stopped running all videos. It loads the information in the top box about length & name. An error message pops saying "an error has caused I tunes to stop working". "Windows will check for a solution and notify if therer is a solution."
Music plays fine so i know that something works on itunes.
Any ideas?

Try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Laserjet CP1025nw HP system tray has stopped working

I bought this printer a month ago and about a week ago I started getting the error“HPCP1020SM.exe (64 bit) has stopped working.” then click close then“HP system tray has stopped working.” appears click close. the printer will still print but these errors continue to come up every time I print. I called HP support but they have no clue. Thanks for who ever can help.

Hi Have you tried installing the basic driver, and the basic driver update to see if you have the same issue? Let me know if you have the same issue using the basic driver. Can you also provide me a screenshot of the error message you are receiving? Firmware update: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-86491-4&cc=us&dlc=en&lc=en&os=228&product=4052972&sw_lang= Basic driver:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-90357-1&cc=us&dlc=en&lc=en&os=4063&product=4052972&sw_lang= Basic driver update:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-98162-1&cc=us&dlc=en&lc=en&os=4063&product=4052972&sw_lang=

HT1926 I'm trying to re-install itunes on my laptop & I am getting a message that has stopped the re-install & it says: "Service 'Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system servic

I'm trying to re-install itunes on my laptop & I am getting a message that has stopped the re-install & it says: "Service 'Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." ?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Kernel-Power Event ID 41: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Hello, Currently we are seeing this issue with a couple of our Lenovo T420s laptops with a Solid State Drive. ruffly about 10 or so. The Reboots happen randomly and do not create a dump file. We have contacted Lenovo and they are
not sure why its happening. Since this Crash I set it for Minidump this did not work my next steps will be to Disable Automatic restart on System Failure to see if it brings anything up. I am also looking at using Procmon to dump to a file as well.
If anyone has any other ideas please let me know.
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
+ System
- Provider
   [ Name] Microsoft-Windows-Kernel-Power
   [ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
   EventID 41
   Version 2
   Level 1
   Task 63
   Opcode 0
   Keywords 0x8000000000000002
- TimeCreated
   [ SystemTime] 2012-02-01T00:02:48.677610900Z
   EventRecordID 8270
   Correlation
- Execution
   [ ProcessID] 4
   [ ThreadID] 8
   Channel System
   Computer LR8K6TLC.cntr.thrivent.corp
- Security
   [ UserID] S-1-5-18
- EventData
BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 129725280988099400
Event 89, Kernel-Power
ACPI thermal zone ACPI\ThermalZone\THM0 has been enumerated.
_PSV = 0K
_TC1 = 0
_TC2 = 0
_TSP = 0ms
_AC0 = 0K
_AC1 = 0K
_AC2 = 0K
_AC3 = 0K
_AC4 = 0K
_AC5 = 0K
_AC6 = 0K
_AC7 = 0K
_AC8 = 0K
_AC9 = 0K
_CRT = 371K
_HOT = 0K
_PSL - see event data.
---- Details
+
System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
89
Version
0
Level
4
Task
86
Opcode
0
Keywords
0x8000000000000020
TimeCreated
[ SystemTime]
2012-02-01T00:02:49.270411900Z
EventRecordID
8271
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
68
Channel
System
Computer
LR8K6TLC.cntr.thrivent.corp
Security
[ UserID]
S-1-5-18
EventData
ThermalZoneDeviceInstanceLength
21
ThermalZoneDeviceInstance
ACPI\ThermalZone\THM0
AffinityCount
1
_PSV
0
_TC1
0
_TC2
0
_TSP
0
_AC0
0
_AC1
0
_AC2
0
_AC3
0
_AC4
0
_AC5
0
_AC6
0
_AC7
0
_AC8
0
_AC9
0
_CRT
371
_HOT
0
_PSL
0000000000000000
Thank you.

We have tested and checked both the Bios and firmware of the SSD Drive's
Bios was up to date and no issue
Firmware was also up to date as well.
Users are still experiencing random Reboots.   I tried to capture the issue with Procmon but since the PC shutdown (Goes to a black screen no power at all even when turning the "Automatically
restart" off under Startup and Recovery) No dmp files as of yet. Unable to configure Procdump due to not knowing where the issue is and what is causing it to happen.
Going to replace one of the PC's with a New one with different hardware to see if this resolve the issue. If anyone has any idea's to be able to capture what maybe happening that would
be great.
Thank you.

Droid Razr I keep having a pop up of "Unfortunately system UI has stopped" what does this mean and how do I fix it?

I keep having a pop up of "Unfortunately system UI has stopped" what does this mean and how do I fix it?

Kelly,
That's a very strange message to get, but don't worry! We can help fix it. Lets check your software version to see which one you're running. Please check to see if there are any updates following these steps: http://vz.to/1qQxQq5
SarahO_VZW
Follow us on Twitter @VZWSupport

My IPad has stopped printing using air print and my HP Photosmart 5520 but my laptop is printing ok on the same system. any ideas? I have re-booted everything.

my IPad has stopped printing using air print and my HP Photosmart 5520 but my laptop is printing ok on the same system. any ideas? I have re-booted everything.

Hi I have an HP printer. I use an APP called print central from APP Store. Used this for the last 2 years on 2 IPhones & 3 iPads with no problems. Cheers Brian

A889 system has stopped

Similar Messages

Maybe you are looking for