AA CS6 stops recording

I have a recording problem that keeps recurring with AA CS6 (5.0.2 Build 5).
It intermittently stops recording and the only way I can get it to start recording again is to restart my computer (not just AA).
Even if I quit or force quit out of AA and reopen the program the same problem occurs unless I reboot the whole system.
I am using a Scarlett 2i2 preamp running into my mid 2010 Macbook Pro (OS 10.7.5)
Often when I try to close AA during this problem I get the message, "One or more files are actively processing jobs. Please cancel these jobs or wait for them to finish".
This message comes even when I am opening a new file and nothing has been recorded yet.
Actually I can get Audition to record again without restarting the computer if I switch my hardware preferences from the Scarlett 2i2 preamp to "Built in input".
Then it will record. But when I switch back to to 2i2 it remains frozen. The system seems to think that something is processing.
Any suggestions would be appreciated. I am growing tired of having to keep rebooting my computer.
Thanks!

Hi Steve,
I did go to Scarlett and download their fix. It seems to be working.
I even unplugged the preamp and plugged it in again while I had a file open which has always produced the glitch in the past.
It looks like that may have taken care of the issue! I will have to give the system more of a test drive bc it is an intermittent problem.
Thanks so much for your suggestion! I think it has cleared up the problem.
Cheers,
Owen

Similar Messages

Why my iPhone Voice Memos sometimes randomly stop recording

Hello everyone,
I'm using my iPhone 6 Plus Voice Memos app to record my lecture in the university, the problem is sometimes the app stop recording and this is causing me major problem.
Note that I'm putting my iPhone on Airplain mode to avoid stopping the recording if someone called me.
The WiFi is sometimes ON while recording, but in all cases the Airplain mode is on
at the end I need to record my classes lectures for more then 60 minutes normally sometimes 160 minutes.
Thank you.

Hey there Al-Shatti Jr.,
If your Voice Memos are still unexpectedly not recording after some time, I would recommend quiitting the app itself first:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
Thank you for using Apple Support Communities.
All the best,
Sterling

When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform.

Logic 10.0.07 keeps stopping recording at the same time every time

Logic 10.0.07 keeps stopping recording at the same time every time 3.14!
How can i get it to extend on recording time?
Model Name: Mac Pro
Model Identifier: MacPro6,1
Processor Name: 6-Core Intel Xeon E5
Processor Speed: 3.5 GHz
Number of Processors: 1
Total Number of Cores: 6
L2 Cache (per Core): 256 KB
L3 Cache: 12 MB
Memory: 32 GB
L3 Cache: 12 MB
Memory: 32 GB
Model Name:
L3 Cache: 12 MB
Memory: 32 GB
Model Name: Mac Pro
Model Identifier: Mac
L2 Cache (per Core): 25
Model Name: Mac Pro
Model Identifier: MacPro
L3 Cache: 12 MB
Memory: 32
L3 Cache: 12 MB
Memory: 32 GB

Do you have auto drop enabled? Look for a red bar at the top where the green cycle bar is. It will punch you out at the end of the red bar.

Adobe Bridge (CS6) Stopped Working & Application Manager Fails No Matter What

Adobe Bridge (CS6) Stopped Working & Application Manager Fails No Matter What I do.
I have uninsalled, ran the cleaner, installed, and Bridge will not open, Application manager will not run.
It
Win 7 x64 Pro
CS6
Thanks

Good luck with that, and don't forget to deactivate CS6.
My system is slowing down after nearly two years, and I am dreading a reinstall - there always seems to be something you have forgotten! What really worries me is what happens to existing raid0 arrays seeing as the mainboard needs drivers. They are backed up, but I just don't trust a single level backup, and will have to add a further 3Tb of drive space to make a straight copy of the raid0 arrays. I also like the idea of Windows 8.1, but dread finding out that the drivers don't work!
The Premiere Pro hardware forum is the perfect place to ask about stuff like that. Harm, Bill, Erik etc. are super clued up on such things, so I shall run my concerns past them before committing.
So I wish you good luck again, and I know you'll make a plan before going ahead with it.

Why does my iPod Touch stop recording videos when it says low battery

OK I would record a long video, about 20 minutes to be approximate. In the middle of my recording, my iPod tells me my battery is low - I have 20% of battery left. But when the message shows up, it stops recording my video and shows a closed lens on the camera!!!
Then I have to force close the app then restart it. Then I have to make a second video. Is there anyway to tell the iPod Touch low battery warning to shut the f**k up and stop interrupting and stopping my recordings? It is VERY annoying. Please reply soon.

Not that I know of. The 20% warning is like the low fuel light on your car's gas tank, it doesn't know when you'll run out of gas only that it's soon. The reason it stops what your doing is to protect the battery. Completely discharging the battery is very bad for the battery and shortens the life of the battery. Hope this helps, Good luck.

Photo Booth has stopped recording Videos all of a sudden??

Hi all,
on my iMac only 6 months old, all of a sudden after working fine Photo Booth today has decided to stop recording videos.
The app launches, green light comes on and the picture/video shows, i press record and it counts down but the counter doesnt move although the picture is still there.
Press stop and it loads a black screen and plonks it in the library thing at the bottom of the picture.. Very odd.
I have trashed the Preferences and this does nothing,
Have deleted the other videos so its not a space issue?
Wondering if anyone else has the same thing???
Any help greatly accepted,,
Many thanks

Does anyone know where you can get a version of Photobooth? I didnt have any disks of the OSX lion that shipped with my iMac?

My canon 600D stops recording videos automatically after 8 seconds.

my canon 600D stops recording videos automatically after 8 seconds. i can't find anything of that sort in the settings menu.
what settings should be used??

my canon 600D stops recording videos automatically after 8 seconds. i can't find anything of that sort in the settings menu.
what settings should be used??

My super-drive macbookpro stopped recording DVD

My super-drive macbookpro stopped recording DVD and continues to correctly read and burn cd. Has anyone had this problem? Is the drive or software? thanks
MATSHITA DVD-R   UJ-868:
Revisão de firmware:          KB19
Interligação:          ATAPI
Suporte de gravação:          Sim (unidade de origem Apple)
Cache:          2048 KB
Lê DVDs:          Sim
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Estatégias de escrita:          CD-TAO, CD-SAO, DVD-DAO
Suporte:          Para mostrar as velocidades de gravação disponíveis, insira um disco e escolha Visualização > Actualizar

This is a very common problem. Some are beacuse of the quality of media, some are because of the speed the media is burnt, some are because the drive gets dirty just where DVDs are concerned, and some are because of computer age. The last problem is common if the machine gets more than 4 years old, the PRAM battery needs replacing, and all sorts of settings start malfunctioning, until lastly the system clock no longer works and it might not boot. The others, see my FAQ*:
http://www.macmaps.com/cdrfailure.html

Why do the "SAVE", "SAVE AS" and "UNDO" functions of InDesign CS6 stop working after a short time?

Why do the "SAVE", "SAVE AS" and "UNDO" functions of InDesign CS6 stop working after a short time?

Normally they don't. You might have some sort of problem on your system, possibly a conflict with other software, or corrupt ID prefs or application. Trashing the prefs is easy, and good place to start: Replace Your Preferences
It will help if you tell us the OS version, whther you've installed the 8.0.1 patch, and how you are trying to access the commands, and what happens when you do. Is this isolated to one file, or does it happen with all files?

Why Does My Camera Stop Recording in the Middle of a Video??

Why does my Rebel T3i stop recording in the middle of me video taping?? Is it because I do not have enough space on my camera for a video? It lets me take plenty more pictures. And when it stops in the middle of a recording, I start recording again, and it works for a little while then stops again! I really don't get it. It is extremely frustrating because I am left with all these chopped up video segments and I completely miss something that my baby is doing (the reason I started taping in the first place!) I am begining to wonder if I should just invest in a video camera instead of taping with my camera. I would REALLY prefer not to, seeing as how I spent a fortune on it, and would like it to do what it is intended to do! Can someone please help??

The camera formats the memory card using the "FAT32" filesystem rather than a proprietary filesystem. This allows the card to be read by nearly any computer (Windows, Mac, etc.)
HOWEVER... there's a limitation in that filesystem that no single file can grow above a specific size. That size is 4GB.
Also, the camera documentation describes that the camera will stop just 1 second short of the 30 minute mark regardless of the file size.
In pro video, movies are normally constructed by bringing together many very short clips. The one-long-continuous-take video style isn't used. If you are attempting to record a long event in one-long-continuous-take then it would be better to use a video camera for the task.
Tim Campbell
5D II, 5D III, 60Da

Crash on stop recording

I have just encountered a problem with GB08 - when ever I stop recording, I get the coloured wheel of death and have to force quit every time, losing my recording. It happens whether I use space bar, mouse click on record button, mouse click on play button, etc. I never had this problem with GB3. Very frustrating - anyone else come across this/have any ideas as to the solution. Cheers!

Hi Wai Keung - had any luck with our problem yet? I was wondering if it might have something to do with my midi setup. I am using a Korg PA-50 keyboard which is connected to the Mac via a midisport 2x2 USB midi interface. So far I have only notice the problem while recording software instruments. Do you have a similar setup? Just seems strange that we are the only two on here that are experiencing this problem. Also, I notice you are from Hong Kong. I'm based in Malaysia - it's just possible we might have got hold of some dodgy software that is so common over here.

HELP!!! LOGIC RANDOMLY STOPS RECORDING FOR NO REASON!

WHILE IM WORKING IN LOGIC EVERYTHING WE'LL BE FINE AND THEN ALL OF A SUDDEN WHEN I HIT THE RECORD BUTTON (ON AN INSTRUMENT TRACK) IT WONT RECORD ANYMORE. I CAN STILL HEAR THE CLICK BUT NO MIDI DATA OR REGION IS BEING RECORDED. NO REGION SHOWS UP EITHER.
ABOUT 25 SECONDS AFTER I STOP RECORDING I CAN HEAR THE SOUND THAT I WAS TRYING TO RECORD
IM RUNNIG version 8.0.2. ITS VERY FRUSTRATING CAN ANYONE HELP? I HAVE A MAC PRO WITH 5 GIGS OF RAM.
IF I CLOSE LOGIC AND RESTART MY COMPUTER EVERYTHING WE'LL BE FINE FOR A WHILE UNTIL IT DOES IT AGAIN. I'VE ALREADY TRASHED PREFS AND REPAIRED DISK PERMISSIONS BUT IT DIDNT WORK. ANY HELP TRULY DESERVES A CASH REWARD... IDEAS ANYONE ?

Try these ideas.
run disk permsissions repair, and disk repair. Consider getting Disk Warrior, it often repairs disks that other programs, don't find a problem with.
trash Logic prefs,
log on as another user, see if problem still occurs...
Does this do this all the time?.... I on occassion (only about 3 times in the last year) have created encountered a problem, where an 'invisible mute' or 'solo' has been generated. That is Logic acts as if a mute of solo button is on, even though none are visible.. I rectified the problem, by hitting "undo" a few times.. One time, I had to go back to a previous version of the song, and recreate from there. I never found out exactly why it was happening..
If none of these solutions work, I would trash Logic itself, and re-install.. And finally if none of that worked. I would trash the whole disk, reformat, install OSX and Logic again.. I have had to do that once or twice also.
Another less drastic measure might be to install another OSX and Logic on a different disk, or partition. Consider also, once you get things working OK is to Clone the OS drive to another, and keep that as a backup, in case things sour.
I have had to go the whole erase, re-install, routine twice in the last 2 years, and it seems to take the better part of a week to get EVERYTHING back to normal... Good Luck

Canon Vixia HF R400 Stops Recording?

Hello!
For some reason, my Canon HF R400 Camcorder (probably a week old) stops recording in the middle of recordings.
This has happened to me multiple times.
Today, I was recording a Piano cover, and it stopped recording around 2 minutes into it! I didn't even know until I watched it later on.
I tried it again, with the same result.
I read that it could be some sensor overheating, but the cam isn't turning off; It's just stopping the recording. Anyone know why?
Thanks!
Sahil

Same problem here. After approximately 20minutes of recording it will stop and start a new recording all it's self.
Any ideas?

Canon Rebel T5i automatically stops recording after about 6 seconds. How can I disable or fix this?

I just got a Canon Rebel T5i and I was testing out the video and several times it will automatically stop recording after about 6 seconds. How can I fix or disable this?

And while buying said faster card... buy a REPUTABLE brand from a reputable vendor. I've come to the conclusion that there are a lot of fly-by-nights making cards that are not as fast as they claim to be.
Reputable vendors are companies like Sandisk and Lexar. But as an SD card is just a plastic card with a sticker on it, and stickers are pretty easy to fake, buy the card from a vendor you can trust is not selling fakes.
This is one item where it is probably not a good idea to try to save money by finding the cheapest deal you can find on the Internet.
Tim Campbell
5D II, 5D III, 60Da

AA CS6 stops recording

Similar Messages

Maybe you are looking for