AA3.0.1 Locking up loading session with UAD2 plugin

When loading a any session in Adobe Audition 3.0 or 3.0.1 that uses the RealVerb Pro or Dreamverb plugins lock the session while loading the tracks (before it starts to load the files)... This effects UAD's 5.2, 5.3, and 5.4 software.
I don'te believe it's the computer, I have this happening on 2 systems and 3 operating systems... And on the same computers the problem does not happen with Audition 2.0
Details:
System 1 (CBS Radio):
Dell 3.1 ghz Core 2 Duo
4 gig ram
750 gig HD total
UAD 1 running 5.4 software
Windows XP Pro
System 2 (Home Studio)
3 ghz Core 2 Quad
ASUS Rampage Formula MB
8 gig of ram
3.3 tb HD total
UAD 2 running 5.4 software
Windows Vista (32) ---- Problem exists with no SP, and with both SP1 and SP2
Windows 7 (64)
Any ideas?

I finally got connected with support... thought trouble shooting, we found the problem has to do with loading 2.0 session with those plugins active. They are looking into it.
If you have any problems like this, for now the only work around is to turn off those plugins when loading the 2.0 session, then turning the plugin on (not everything, just those two effected it seams)
If you headbutt this problem, please feel free to PM me and I can walk you though the work around until their is a more final solution.

Similar Messages

  • IPlanet Load Balancing with BEA Plugin

    I'M using a IPlanet Enterprise V.4.1SP9 and use the weblogic load balancing plugin. Furthermore I use 3 weblogic express 6.1 sp2 which receive the requests of the iplanet webserver. my question is how to configure the load balancer plugin (round robin etc.) and if it is possible to get some (debug) output.
    I need it because the load balancing doesn't work properly with netscape (althoug it suprisingsly does with the Internet explorer).
    Greetings,
    Boris

    I'M using a IPlanet Enterprise V.4.1SP9 and use the weblogic load balancing plugin. Furthermore I use 3 weblogic express 6.1 sp2 which receive the requests of the iplanet webserver. my question is how to configure the load balancer plugin (round robin etc.) and if it is possible to get some (debug) output.
    I need it because the load balancing doesn't work properly with netscape (althoug it suprisingsly does with the Internet explorer).
    Greetings,
    Boris

  • I jailbroken my ipod and when i try to restore it, its stuck on the loading screen with a skull on it but now i cant even look at the apps or lock it plz up i tried everything pretty much. i tried putting it in dfu and dfu pwn mod

    i jailbroken my ipod and when i try to restore it, its stuck on the loading screen with a skull on it but now i cant even look at the apps or lock it plz up i tried everything pretty much. i tried putting it in dfu and dfu pwn mod
    < Edited By Host >

    Jailbreaking has its consequences and voids the Apple warranry.  We can't discuss jailbreading on this Apple forum.

  • Lock and Load X - Magenta Flash with 10.0.6

    Hi, After upgrading to 10.0.6 and installing the latest Core Melt Lock and Load X plugin, I had a clip which was stablized, but a magenta flash appeared half way through the shot. If I remove the plugin from the clip it plays fine.
    Has anyone else seen this?
    Thanks

    I have the same problem with Lock & Load on my system after upgrading to 10.0.6. Also Neat Video Reduce Noise-plugin have similar problem. Can´t find any way to fix the problem.....
    Bjarne

  • Since updating to I.O.S7 on my ipad2 all i get when i turn it on is a loading screen with a picture of a charger going into an ITUNES sign? HELP nothing will work not interactive at all?

    all i get when i turn it on is a loading screen with a picture of a charger going into an ITUNES sign? HELP nothing will work not interactive at all.aince updating to I.O.S7.0.2???
    What should i do currently have it on charge for several hours not done a thing and have been locking and unlocking and resetting

    Please see: http://support.apple.com/kb/HT1808 for further info.  It sounds like you are already in Recovery mode so if the image in Step 4 is the one you see, skip to Step 5.
    Regards,
    Steve

  • CF 10 Load-Balancing with Remote Instances

    I was reading an article on Clustering/LB/HA using CF8, but have not found any updates for CF10.
    Using VM VirtualBox to setup a few virtual servers, I am looking to setup a load balancing of ColdFusion 10 on 2 remote instances. The goal would be have ColdFusion Cluster Manager be able to point http request to one of the two servers based on load/availability. Not really having a hardware cluster/failover setup, just managing resources on two CF instances instead of a standalone.
    The servers are Windows Server 2008 R2 with IIS7.5 and ColdFusion 10 Enterprise on installed on 3 of these machines. Let's call them CF-LBManager, CF-Web1, and CF-Web 2. In the CF Docs, they show the Cluster Manager adding the local CF instance and "if you want" a remote instance. However, this scenario would require the main instance to be running and not fail for it to direct to the other instance.
    I am trying to set this up now with CF-LBManager as just a manager of the requests coming in. In the Enterprise Manager >> Instance Manager, the local instance is shown and I add the two remote instances with the correct Remote Port, JVM Route, etc. I also made sure the <Cluster>...</Cluster> block was added to the two remote instances (CF-Web1 and CF-Web2) \runtime\conf\server.xml file too, Jetty Services also is running. Now under the Enterprise Manager >> Cluster Manager I add the two remote instances to the cluster, not the local instance on CF-LBManager with Multicast Port and Sticky Sessions enabled. On Submit, I get a green message "You must restart all the server instances and any configured webservers for these changes to take effect.". I go ahead and reboot the servers and come back.
    I now browse to the ColdFusion page as a test on CF-Web1 and CF-Web2 to make sure CF is running properly, they do. I then browse the IP of the CF-LBManager, however it only returns the local IIS web site and not redirect to one of the two cluster members. I am not seeing any message on the coldfusion-out.log on the remote instances. Am I not setting this up correctly or not enabling the Cluster Manager to take over and pass along the requests to those in the cluster?

    Unfortunatley I don't have a lot of experience with CF10 on Windows, but if you are running CF behind IIS I think  you will need to update the Tomcat connector configuraiton to do load balancing. I'm not sure if re-running the wsconfig tool on all of the servers will do this or not, but that is what I would suggest trying first. If that doesn't work you will need to update the Tomcat connector configuraiton manually. You can find more information on load balancing with the Tomcat connector here: http://tomcat.apache.org/connectors-doc/generic_howto/loadbalancers.html.

  • SQL*Loader problem with direct path load

    Hi all,
    Its on Oracle 9.2
    I have a sqlldr control file which has couple of columns like,
    my_column_1 ,
    my_column_2 "decode(:my_column_1,'ONE','AAA','TWO','BBB', :my_column_1)"
    The table I am loading to is in user X and I am running the load from
    user Y. Everything works fine with conventional path load (not direct
    path) as grants are made for the table to user Y.
    When I load the data with same control file with direct path, I get an
    error ,
    01031 - insufficient privileges
    Is this anything to do with the syntex I have used in the control file
    or its a privilege issue. If its a privilege issue which privilege is
    that ?
    I did following tests,
    1) Load is run with conventional path load, from user Y and the decode
    statement is in control file - Load works
    2) Load is run with direct path load, from user Y and decode statement
    is in control file - Load fails with above mentioned error
    3) Load is run with direct path load, from user Y and decode IS REMOVED
    from the control file - Load works (!!!)
    What can be the conclusion? Way out ?
    Thanks and Regards

    You need to grant
    grant lock any table to userY;
    For more information see MetaLink Note 1082550.6

  • Lot of sessions with wait event - jobq slave wait

    Hi All,
    My db version is 10.2.0.4.0
    I have scheduled jobs through dbms_scheduler with repeat_interval of 20 mins(this for refresh of mviews).
    Now the job is in running state for a long time. then i checked the sessions..
    I have five session with wait event - "jobq slave wait"
    I check job_queue_parameter - 10
    select count(1) from dba_jobs;
    COUNT(1)
    8
    Now the job is in running state for a long time...
    Can someone help me how to proceed...
    Thanks,
    Suresh S.

    Post Operating System (OS) name & version for DB server system.
    Post results of
    SELECT * from v$version
    does following SQL return any rows? If so, they point to problem area.
    SELECT DECODE(request,0,'Holder: ','Waiter: ')||sid sess,
    id1, id2, lmode, request, type
    FROM V$LOCK
    WHERE (id1, id2, type) IN
    (SELECT id1, id2, type FROM V$LOCK WHERE request>0)
    ORDER BY id1, request
    /

  • Load balancing with JSP

    Anyone and everyone,
    When configuring load balancing with Weblogic clusters, does load
    balancing take effect for all services or just EJB and RMI? Or another
    way of saying the same thing, can I setup weighted load balancing for
    the JSP engines across 2 weblogic servers.
    Thanks in advance,
    Mike

    The load-balancing documentation you read describing the different algorithms only applies to RMI stubs (e.g., EJB clients). Please see http://www.weblogic.com/docs51/cluster/concepts.html#1026091 for a description of how load-balancing/clustering works with servlets/JSPs.
    The short answer is that in using servlet clustering, most people want/need/use in-memory replication for HttpSession objects. In WLS 5.1 (and before), in-memory replication requires one or more proxy servers be set-up in front of the cluster. Typically, most people use something like BigIP to load-balance
    across the proxy servers and let the weblogic plug-in for the proxy server handle the routing to the cluster. The plug-in uses round-robin until an HttpSession is established for a user, then it always tries to route to the server where the user's session is located.
    Hope this helps,
    Robert
    Brian Lin wrote:
    All,
    I have a quesiton here regarding load balancing with DNS round robin. As of Chapter Adminstration of Clustering Weblogic server, Weblogic can be configured to balance by weight. How about Weblogic handle weight based balancing after DNS round robin ip response? or just can choose one way instead of both?
    What's the big difference between choosing BigIP and software balancing (WL)?
    Brian
    "Wei Guan" <[email protected]> wrote:
    I don't think you can configure this load balancing in weblogic in current
    release. However, if you have Big-IP or LocalDireoctr, you can set up
    weighted load-balancing there. Otherwise, weblogic proxy will use DNS round
    robin to do the load-balancing between JSP engins.
    My 2 cents.
    Cheers - Wei
    Michael Yakimisky <[email protected]> wrote in message
    news:[email protected]...
    Anyone and everyone,
    When configuring load balancing with Weblogic clusters, does load
    balancing take effect for all services or just EJB and RMI? Or another
    way of saying the same thing, can I setup weighted load balancing for
    the JSP engines across 2 weblogic servers.
    Thanks in advance,
    Mike

  • Multihomed eBGP load balancing with 3 ISP's

    We currently peer with 2 ISPs using BGP in an active/failover configuration.  My company wants to move to a 3 ISP model where Internet traffic is split across the 3 providers so that bandwidth is equally distributed on outgoing traffic across our 2 /22 ARIN IP ranges.  This is from our 2 edge switches that have VSS.  
    Within my limited knowledge of BGP, I have determined that we could do load sharing pretty easily by adding multiple default routes and breaking up our /22's into /24 and advertising them that way.  However, I don't think this satisfies the request that downtime must be seamless, should one link drop.  
    Currently, our ISP's advertise default routes.  From the research that I've done, we could get close to load balanced links if we receive full BGP routes and community settings and definitions.  I'm nervous about this because it looks really complicated, and I don't want our AS to turn into a transit AS.  I've been told the same can be accomplished with only partial BGP routes and community settings and definitions.  
    Personally, I think we just need a WAN load balancer.  However, given the request, is there a thread out there that can explain this, or can someone discuss this requested scenario a little bit?  
    Thanks!

    Hi there
    First question would be what is the required reconvergence time for the applications using the Internet? Should an outage occur, when do they lose their state? Once you know that, you then have a target to aim for in terms of recovery
    With regards load-balancing, with BGP we are always talking inbound and outbound.
    The outbound solution is relatively simple - each ISP advertises a default route to your Internet edge router(s). Create an eBGP session from each edge router to the core, advertise the default route and redistribute into the IGP. Ensure the IGP cost to each BGP next hop is equal and you have ECMP for outbound routing.
    Inbound influence is usually via MED (not likely in this case given 3 ISPs), adjusting local-pref in the ISP via BGP EXT communities configured your end, or via AS-PATH prepending for longer prefixes from your /22. Prepending would be simplest, but your unlikely to get an exact inbound traffic split, however a relatively even distribution should be sufficient. 

  • How does load-balancing with WebCache work - is there still a bottleneck?

    Hello,
    We're migrating an old Forms 6i app to 10.1.2.0.2 (apps servers = Redhat Linux), and are starting to consider using WebCache to loadbalance between two application servers.
    My question is this - say we have apps servers A and B, both running Forms and Reports Services. We use Webcache on server A (don't have the luxury of a third apps server...) to load balance between A and B. So all initial requests come into A, which in some cases may then be diverted to start a new Forms session on B.
    For those users whose middle-tier sessions are now running on B - will all network traffic for their Forms session continue to be routed through Webcache on A, then to B, over the course of the session? Or does Webcache somehow shunt the whole connection to be straight between the client PC and server B, for the duration of that Forms session?
    If the former, does that mean that the server hosting Webcache can still be a significant bottleneck for network traffic? Have people found load-balancing with Webcache to be useful..?
    Thanks in advance,
    James

    Hi gudnyc,
    Thanks for posting on Adobe forums.
    For HDPI you do not have to do any It will adjust automatically.
    http://helpx.adobe.com/photoshop-elements/using/whats-new.html
    Regards,
    Sandeep

  • How to Initiate Multiple SQL*Loader Sessions

    Oracle db utilities(Chapter-Conventional and Direct Path Loads) talks of parallel data loading models for direct load.
    We need to execute the following commands:
    sqlldr USERID=scott/tiger CONTROL=load1.ctl DIRECT=TRUE PARALLEL=true
    sqlldr USERID=scott/tiger CONTROL=load2.ctl DIRECT=TRUE PARALLEL=true
    sqlldr USERID=scott/tiger CONTROL=load3.ctl DIRECT=TRUE PARALLEL=true
    The previous commands must be executed in separate sessions, or if permitted on operating system, as separate background jobs.
    We want to run these in separate sessions. Our problem is that we have a job running which invokes sqlldr. Now how can we initiate Multiple SQL*Loader Sessions(actually multiple sql sessions which run concurrently,i.e. in parallel)? I need the command for it!
    Regds,
    Rohit

    I tried opening two files but selecting and hitting enter. it opens one SSMS and two tabs.
    Balmukund Lakhani
    Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
    This posting is provided "AS IS" with no warranties, and confers no rights.
    My Blog |
    Team Blog | @Twitter
    | Facebook
    Author: SQL Server 2012 AlwaysOn -
    Paperback, Kindle

  • Loading and with error message :COLLECTION in SOURCE SYSTEM ENDED

    Hi,
    Facing problem with master data object while loading and with error message :COLLECTION in SOURCE SYSTEM ENDED
    This load is getting failed every day. It is a full load and records are getting transferered and added.
    when we check in details tab in RSMO all data packets in processing is green but in extraction some of the data selection scheduled are in yellow.We are changing QM status to green as records are added.
    Version i am using is BW 3.5
    Please let me know what will be the problem???
    Thanks,
    Edited by: lokesh thonsyd on Feb 18, 2009 8:55 AM

    First try to find out the reason for the load failure. Once you fix this, do a manual run of the infopackage and when successful you can continue with the rest of process chain.
    Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
    You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
    Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
    In the opened popup click on the tab 'Chain'.
    In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
    1. copy the variant from the popup to the variante of table rspcprocesslog
    2. copy the instance from the popup to the instance of table rspcprocesslog
    3. copy the start date from the popup to the batchdate of table rspcprocesslog
    Press F8 to display the entries of table rspcprocesslog.
    Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
    Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
    1. rspcprocesslog-log_id -> i_logid
    2. rspcprocesslog-type -> i_type
    3. rspcprocesslog-variante -> i_variant
    4. rspcprocesslog-instance -> i_instance
    5. enter 'G' for parameter i_state (sets the status to green).
    Now press F8 to run the fm.
    Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.

  • Locking IE window-sessions

    We have a problem with locking IE window-sessions.
    We start two sessions on one PC. In one session we run
    long time query and this window is waiting for a result.
    Unexpectedly all windows (independent sessions) of that PC are in waiting mode.
    Environment: Oracle AS10g 1.0.4, Oracle9i Enterprise Edition Release 9.2.0.1.0, Windows XP, Jinitiator 1.3.1.17

    I have just the same problem. forms 9.0.4.2, JInitiator 1.3.1.18.
    If one session is busy, then all the other forms sessions are also busy! this is not true concurrency!
    any solution?

  • FF29 fails to load Session Manager, old tabs, any add-ons, Cool Preview, etc after upgrade on XP

    FF29 fails to load Session Manager, old tabs, any add-ons, Cool Preview, etc after forced upgrade on an XP system. Connecting to sites, especially support.mozilla.org requires numerous retries. Clicking Add0on shows none of the previous working ones. They are gone. No Session Manager at all. Even reporting this has taken over 3 hours. Yesterday, everything worked fine before the restart to 29. What can be done to recover settings from 2-3 days ago? Thanks for keeping it simple!

    Thank you for your question. Once history is gone, there is not a big chance of getting it back. However there are some places to check. For next time, try to backup your profile [http://kb.mozillazine.org/Profile_backup].
    The crash reports from your troubleshooting information is caused by a hang in the Flash plug in version 13. I understand however that this is an issue with the history.
    *[[Recovering important data from an old profile]]
    *[[https://addons.mozilla.org/en-US/firefox/addon/cacheviewer/ Cache Viewer]] is an add on to help you search through the dates of the history
    *SQLite add on will allow you to open places.sqlite file in the current profile.

Maybe you are looking for