AA3, changing tempo in Edit mode.

Hello everyone.
I've been using AA3 for quite some time. I generally prefer to use FL Studio to work with recordings, but since Edison (FL Studio's equivalent to Audition's Edit Mode) if very poorly made, I prefer to use Audition to edit samples and recordings. When I record something like, an acoustic guitar, sometimes the recordings are a bit out of perfect timing, and I always like to have recordings perfect. So, what I would like to do is go into audition's edit mode and manually move around the notes myself. This seems to sometimes work well, if a note is a bit late, I delete the extra space. If it's a bit early, I copy a little bit of the dead space behind it, paste it, and am good to go. It's time consuming, but in the end, it syncs up perfectly with the VSTs I use, since computers are never really off timing. But, this doesn't seem to work when I want to change the tempo. For example, I recorded a song at 70 BPMs. So, I loaded the song into edit mode. Whoops! The tempo must be off. So, I go into multitrack mode, change it from what it's at to 70, go back and... there's no difference. From my understanding, BPM stands for beats per minute, and a beat isn't a constant in the equation, the minute is. Therefore, the distance between two beat should change when adjust the tempo. Only being able to work and edit in one tempo is very constricting, so I can't imagine that the people at adobe/cool edit pro would have done this on purpose. Is there a way around the tempo in edit mode being seemingly stuck at whatever figure it's at? Thanks for the help, I really need to get this recording done soon!

I'm somewhat confused now. You're telling me that the little ruler at the bottom of edit mode that says BMP ### (Where ### stands for the number set in multitrack view) that has all of the tickers is simply there for show? That would be like Photoshop having a ruler set to 72ppi, without the user being able to change it. If the document was in 300ppi, the ruler would not change, and the measurements would be off (of course, it would erroneously read 72ppi, as Audition erroneously reads the tempo set in multitrack view). Forunately, I found the answer that I had been seeking elsewhere. It appears that there is a small bug in Audition that when you change the tempo in Multitrack View, it changes the number displayed on the ruler in Edit View, but not the distance between the "ticks" giving it an inaccurate reading. To fix this, one must right-click the ruler, and adjust the tempo right there where it says "Edit Tempo...". I feel foolish that I didn't see this myself, but I've never needed to right-click the ruler until now. The reason I posted this was to help anyone else who couldn't find the answer, so they didn't have to deal with anyone on a high-horse who really didn't know the answer, or hardly read the question enough to understand it, but answered anyway with a quick and defeating answer that might quickly gain them points. I'm not naming names, but some people (not naming names) did come off a bit strong. But perhaps that's entirely deliberate...
-E

Similar Messages

Can't save any changes made in EDIt mode?

HI all
I am new to apple products ... but I am now playing with iPhoto 11. I am able to import my photos from my camera with no problems. And then, in EDIT mode, under "adjust" I am able to make a lot of nice changes - De-noise, sharpness, etc.. - but I don't have a button to allow me to save? I have looked at the user guides on line and they talk of a DONE button - but I don't have one? And when I go back to the photo library and look at the photos there, the changes I have made are not shown. But if I click on each photo individualy and click on EDIT again - the changes I made are saved? But I can only see my changes whilst in the EDIT mode per photo?
How do I save my edits back to the photo library? I want to uploaded the photos with the changes I made - but everytime I try an upload -- even a single photo - I get the original photo before my edits
Any help would be appreciated please
Thanks
Chris

Your database is a bit mucked up (<- Technical term, that)
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Abap editor change to a edition mode unknown

hi, i want to make some changes in a report but when i try it the next information message is sent "only repairs in non original system", after the abap editor switch to a edition mode that i dont know.
Can you help me?

In the se38> edit> modification operations--> switch off assistant
a®

Photo Changes Color in Edit Mode

What I've noticed is that when I put a photo into Edit mode, the photo automatically lightens. When I go through the process of editing my photo to the color range I want it to be in and click on Done, the photo goes back to the lineup where it displays with a darker or more saturated shade, thus rendering my editing decisions null and void. Has anyone else noticed this? Is there any way to correct it so that the photo appears the same way whether it's in Edit mode or not?

Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

FBL5N - Feild selection non editable mode

Hi All,
When i execute FBL5N transaction,i am not able to select the feilds as per my desire bcoz the feild display ICON is in non editable mode.
The only option i have is layout selection and not the feilds selection.
Can you let me know how to change it to editable mode.
regards

Hello,
You don't have authorization for maintain ALV layouts. Please contact to your Basis department for authorization.
ALV layout authorization object is S_ALV_LAYO. Please tell your Basis departman to give this object value for '23'.
Regards,
Burak

ALV edit mode

Hi All,
I am displaying an ALV List.There is a column called Final invoice indicator which is a check box.When the user checks this check box that record in the ALV output has to be changed to non-editable mode.I am using classes for ALV display.How can i achieve this?
Thanks,
Rakesh.

Hi,
U can check the value of the checkbox and if it is 'X' u can set it to no editable as
CALL METHOD g_grid->set_ready_for_input
EXPORTING i_ready_for_input = 0.
where g_grid is the alv object.
Hope it helps.
Anju

I'm using Adobe Acrobat with the hope of editing a url on the graphic...a simple 3-letter change, save, close and send for printing..how do I get in edit mode to delete 3 letters and insert 3 new letters?

?I'm using Adobe Acrobat with the hope of editing a url on the graphic...a simple 3-letter change, save, close and send for printing..how do I get in edit mode to delete 3 letters and insert 3 new letters?

pkg4ibm wrote:
editing a url on the graphic...
Not sure what you mean by that: is that URL in an image, or is it actual text?
If it is in an image, then you need to extract the image, edit it with something like Photoshop, then add it back to the PDF.
If the URL is actual text, I suggest that you remove the entire URL, then add the corrected link.

For Adobe Acrobat X Pro how do you change font size Acrobat in form editing mode?

For Adobe Acrobat X Pro how do you change the font size when Acrobat is in Form Editing Mode? The fonts are different sizes in the highlighted fields. I want the font the same size throughout my document...

Dear Michael:
The documents do not look professional with the 2 different font sizes. And it
is driving me crazy because I cannot figure it out… But I will try the steps you
gave me to change the font size. Attached via e-mail is a screanshot of the
document.
Sincerely, Lisa

Change background color during text edit mode

THis is a wacky problem...
I have a presentation template. The slide master has white copy in the title and black copy in the body/bulleted list.
When I try to use the template and edit the title copy, the background color for editing that line is white, just like the text, so I can't see what I'm typing. I can't figure out how to change the background color during text edit mode so that I can actually see what I'm typing. Is there a way to make this transparent?
For some reason, the body copy edit works fine: black text edited in either a white or transparent background color.
help!

THis is a wacky problem...
I have a presentation template. The slide master has white copy in the title and black copy in the body/bulleted list.
When I try to use the template and edit the title copy, the background color for editing that line is white, just like the text, so I can't see what I'm typing. I can't figure out how to change the background color during text edit mode so that I can actually see what I'm typing. Is there a way to make this transparent?
For some reason, the body copy edit works fine: black text edited in either a white or transparent background color.
help!

Changing background color in Edit mode?

Is there any way to change the background color in Edit mode. My background is white, very annoying.
Also full screen mode is Black. Also annoying, wish it was dark grey.
Thanks,
Ed

no
suggest to Apple - iPhoto menu ==> provide iPhoto feedback

PS CC 2014 Exiting Text Edit mode when changing to another application

I just updated to PS CC 2014 on my iMac running Mac OS X Yosemite.
I noticed that if I enter Text Edit mode on a text layer and then change over (CMD+Tab or ALT+Tab) to the word processing app (TextEdit or Word) that Text Edit mode will commit.
In PS CS6 (my previous version), it used to be that Text Edit mode would stay on, so that I could change to the text document I want to copy/paste from and then back to PS. I mostly use keyboard shortcuts and rarely use my mouse/trackpad.
My question: Is there a way to get that functionality back? or is this a PS CC 2014 glitch?
Thanks!

http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

Any way to change speed of a clip in "over-write edit" mode?

I want to change the speed of a clip in the timeline without having to lock all the other tracks or having to move the other following clips out of sync. For example I have a clip which lasts for 1 sec, which I want to change to 3 secs. Normally when I do this in the timeline the other clips on the same video tracks which follows, will move their position..... How to change speed in "over-write edit mode"?

I think it's even easier to just match frame the "source file"... put your playhead on the clip you want to speed change in your sequence. Then type optioncmdf. Perform the speed change in the Viewer, then simply cut it in... Might help to put it up above the older, use the double arrow selection tool facing right to move the clips past this change later... pull the upper track speed changed clip down over the old, and viola.
Gotta say though, it's a lot easier to perform the speed change in the Viewer, and edit it all in as you go rather than doing it after you've put the clip in a sequence. (not always possible to determine what the speed change should be maybe, but sure easier.... FCP 7 handles this problem a lot better for sure, and worth the upgrade price if your machine is compatible.
Jerry

Change step parameters in teststand edit mode

Hello,
I would like to know if it's possible to change the parameters in a step in edit mode of teststand.
I have attached a sequence with one step, in this step I want to select DMMx.
After the selection I want to teststand to fill in the parameters in the step so I can the choose which type of measurement and such.
If this is not possible how could I make something like this possible.
As you may see this will be a HAL, and the only option I can see which would do this is bij a string array but I don't want to type in the commands in string.
Attachments:
ring.vi ‏14 KB
Sequence File 1.seq ‏5 KB

Hi Darkxceed
My recommendation for doing a HAL i TestStand would be to use an object oriented approach.
Create a class hirachy of your instruments like the following inside of LabVIEW:
Then use Dynamic Dispatch to make TestStand choose the instrument of interest. There is an example of using Dynamic Dispatching in TestStand here:
TestStand Using LabVIEW OOP Truck Example
https://decibel.ni.com/content/docs/DOC-24098
This solution will offcourse require you to read up on creating applications using object oriented programming in LabVIEW. We at NI have a course that walks you through both the theory and practical implementation. It is called Object Oriented Programming in LabVIEW. If you have a SSP agreement, you should be able to find it as Self Paced Online Training as a part of your contract.
There is also a good introduction to OOP in LabVIEW and HAL here:
https://decibel.ni.com/content/docs/DOC-32506
(There is a video embedded in the PDF)
Best Regards
Anders Rohde | CLD | Platinum Applications Engineer | National Instruments Denmark

PO No. Editable Mode in VI01/VI02 - Shimpment Cost Create/Change

Hi,
We have a Requirement, for that we need PO No. in VI01/VI02 in Editable Mode.
Is it Possible to make PO No. in Change (Edit) Mode in VI01/VI02 (Shimpment cost creation or change)
Either through Functional or Technical (Using User Exit or Screen Exit).
Regards,
Srinivas.

Thanks for ur reply - AA.
I do wish to go with Standard Procedure and configured as per sap standard
Due to User's requirement, Just I want to check whether it (Editing P.O. No.) is possible using Standard Functional or Technical Solution.
Thank You,
Srinivas.
Edited by Srinivas on 18/02/2009 at 05:30 P.M.

Changing BEx Query in EDIT mode in production environment

Hello,
In our BI Production system, the BEx queries can not be opened in edit mode.
I have to change the query in production.But the same qury in developement is quite different.
So instead of changing the query in dev and transporting it to quality and prd, i want to directly edit the query in PRD.
Is there any way i can change the query in production directly?
If so, what are the steps to be followed?
Also, can we copy the query in Prd environment into developement environment?
Edited by: shreyasketkar on Jun 1, 2011 4:42 PM

Hi ,
please visit this link your answer is might there,
[want to transport object from production to dev server]
Transporting from Production to Development is definitely not "Best Practice". For exceptions this is OK, but I can't recommend to do this on a regular basis. Because in the end you will turn your production system into a development box and create potential circular references:
DEV -> QA -> PROD -> DEV
for details about transport system please see
[http://help.sap.com/saphelp_bw30b/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm]
Regards
satish singh
Edited by: satishsmse on Jun 2, 2011 4:15 PM

AA3, changing tempo in Edit mode.

Similar Messages

Maybe you are looking for