AAA accounting for per-user data amount limit

Hello,
I don't have too much experience with AAA, and I want to implement the following:
- I have a FreeRadius, ASR1001-X with IOS XE
- I want to keep records of how many data is consumed by each user
Any suggestion will be welcome.
Thank you.

Just for information i post these links
1. http://www.linuxquestions.org/questions … er-715490/
2. http://www.linuxquestions.org/questions … ge-617928/
3. http://www.linuxquestions.org/questions … asis-8674/

Similar Messages

Per user bandwidth rate limit.

How to configure per user bandwidth rate limit for wireless guest client, authentication server is ISE 1.2 & wireless controller is 5760.

The Cisco 5760 WLC supports better QoS than other c
ontrollers, allowing prioritization of mission-crit
ical
applications:
●
The Cisco 5760 WLC supports four wireless hardware
queues and priority-based queuing compared to
software-based queuing in existing controllers.
●
The Cisco 5760 WLC follows MQC based commands, allo
wing usage of exact commands for configuring
QoS on different types of network devices.
●
The Cisco 5760 WLC supports QoS policies to be appl
ied in a hierarchical fashion with more granularity
per SSID per radio, while on the current controller
s granularity is per WLAN.
●
The Cisco 5760 WLC supports approximate fair bandwi
dth to make sure of fairness at client, SSID, and
radio levels for Non-Real Time (NRT) traffic. There
fore, if one user consumes excessive bandwidth, we
can
limit the amount of bandwidth that user receives an
d thereby not deprive other users.

How to query the opening balance for an specific account for an spec. date

Hi all,
for my user query I need to calculate the opening balance for an cash account for an specific date.
Any ideas, how can I do this?
Or may be you know a field in an SBO table that already contains information I need...
Best Regards,
Inna

Hi Inna,
to find the opening balance for an account or a business partner, please see SAP Note [1114253|https://service.sap.com/sap/support/notes/1114253] :
Symptom
How to find the opening balance of a business partner or G/L account.
Other terms
Account, customer, supplier, vendor, creditor, debitor, start, initial, first, opening balance, business partner, G/L, SAP Business One
Reason and Prerequisites
Consulting
Solution
There are several possible approaches:
Approach 1 - Business Partner Opening Balance:
1. Go to Business Partners -> Business Partner Master Data -> find the Business Partner
2. Click on the orange link arrow next to the field 'Account Balance' in the header region of the window.
3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
4. Click on the button 'Refresh'.
5. Find 'OB' in the column 'Origin', this is the opening balance journal entry.
Approach 2 - Business Partner Opening Balance:
1. Go to Business Partners -> Business Partner Master Data.
2. Click on the orange link arrow next to the field 'Account Balance' in the header region of the window.
3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
4. Click on the button 'Refresh'.
5. Double click on the column header 'Posting Date' to find the earliest transaction on the business partner account. This transaction could be opening balance, verify this with the company accountant.
Approach 3 - G/L Account Opening Balance:
1. Go to Financials -> Chart of Accounts -> click on the account name once.
2. Click on the orange link arrow next to the field 'Balance'.
3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
4. Click on the button 'Refresh'.
5. Find 'OB' in the column 'Origin', this is the opening balance journal entry.
Approach 4 - Business Partner and/or G/L Account Opening Balance:
1. If using SAP Business One 2005 SP01 or earlier, go to Reports -> Query Generator -> click on 'Execute'.
2. If using SAP Business One 2007 or later, go to Tools -> Queries -> Query Generator -> click on 'Execute'.
3. Ignore the red system message in the bottom of the screen.
4. Click on the pencil icon in the top left of the window, the field with 'SELECT *' will change colour to white, then yellow when activated by clicking in the field.
5. Copy the query below:
SELECT T0.[TransId], T0.[Debit], T0.[Credit] , T0.[CreatedBy], T0.[TransType] FROM [dbo].[JDT1] T0 WHERE T0.[TransType] = '-2' and T0.[ShortName] = '[%1]'
6. Click on 'Save' and give the query an appropriate name and select the appropriate category.
7. Click on 'Execute'.
8. Click on 'Existing Values'.
9. Select the G/L account or the Business Partner name from the list and click on 'OK'.
10. The system message 'Records retrieved by this query #' (# = number of records) will pop up. Click on 'OK'.
All the best,
Kerstin

Can I use one itunes account for multiple users and multiple devices

Can I use one itunes account for multiple users and multiple devices?

The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

I have one home computer and our household has 2 iphones. I am signed up on itunes and now my husband would like to have an account with itunes as well. Can there be two accounts for 2 users for itunes on one home computer? How do I add another account ?

I have one home computer and our household has 2 iphones. I am signed up on itunes and now my husband would like to have an account with itunes as well. Can there be two accounts for 2 users for itunes on one home computer? How do I add another account ?

Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

Lion Server Mobile accounts for Macbook users

Hi All,
I'm looking for a 'Best Practice' when setting up mobile accounts for Macbook users who just want to be able to use their machine away from the office.
We DON'T want to sync anything, just create a mobile account on the Mac (a bit like a domain profile on a PC).
I understand that this can be configured through workgroup manager in preferences for either the machine or the user account.
What should the mobility settings be set to? Obviously the Account creation box is ticked but what should the 'Create home using' settings be ?
Thanks Trappers

I figured out how to delete the user from the command line.
I used Remote Desktop to send as Root: dscl . -delete /Users/userID
Where userID is the user's shortname.
You could also log in locally and use the terminal to send:
sudo dscl . -delete /Users/userID

I want to secure my email account for other users of the i-pad. Is this possible?

I want to secure my e-mail account for other users of the i-pad....
Is this possible???

no.
The only way is if you use a webmail app - not the included e-mail app - so you can password protect it online.
The iPad is meant to be a single user device so it has no protocols to partition off any part of it (beyond what restrictions allow)

How to create accounts for remote users in 1841

Hi,
I was wondering how can i create accounts for remote users to be able to vpn please ? I have setup the vpn server successfully.
Regard,

Hello.
I believe that you can try this:
Router# configure terminal
Router (config)# password encryption aes
Router (config)# crypto ipsec client ezvpn ezvpn1
Router (config-crypto-ezvpn)# username server_1 password 0 blue
if you are using easy vpn.
from: http://cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a0080455b7d.html

R12 Restrict Parallel Concurrent Requests Per User to a Limit.

Hi everyone,
Is it possible to restrict parallel concurrent requests per user to a limit.
e.g. UserA sending concurrent requests to submit 15 heavy reports one after another. After 2 minutes he feels free. Now 15 reports running in parallel are heavy enough to take system's performance down. Is there a way to restricting parallal reports by a single user to 5.
Waitning........
Regrads,
M. Farooq Khan.

Hi,
Please check the profile optiion
Concurrent:Active Request Limit
Thanks,

Windows Installer repair issue for per-user folders/files

Intro:
I have doubts that this is the right place to ask about this, since this issue has existed for me on many windows platforms, please suggest where this should be forwarded if this is an inappropriate place to ask.
Please do not be confused by the directory paths for XP, this issue is also true for Windows 7.
Description:
Windows Installer does not repair files in per-user directories, such as [AppDataFolder], when initial installation is performed using system account (for example - distributing the package through SCCM or using psexec) and repairing under a user with administrative
privileges (limited user repair works fine).
Example.
.msi installation installs a custom .xml configuration file to "[AppDataFolder]". We're installing .msi by using psexec /s. log output:
MSI (s) (D8:F0) [15:19:01:214]: Executing op: FileCopy(SourceName=SETTIN~2.CON|customXML,SourceCabKey=customXML,DestName=customXML,Attributes=16384,FileSize=2633,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,,,InstallMode=58982400,HashOptions=0,HashPart1=-1992414570,HashPart2=1238809189,HashPart3=-80616146,HashPart4=146746036,,)
MSI (s) (D8:F0) [15:19:01:214]: File: c:\WINDOWS\system32\config\systemprofile\Application Data\customXML;
To be installed; Won't patch;
No existing file
MSI (s) (D8:F0) [15:19:01:214]: Source for file 'customXML' is compressed
MSI (s) (D8:F0) [15:19:01:230]: Note: 1: 2318 2: c:\WINDOWS\system32\config\systemprofile\Application Data\customXML
When a user with administrative credentials accesses the advertised shortcut repair is run on the component that has the .xml configuration file, event viewer has an entry about this.
The verbose repair log file shows the following entry:
MSI (s) (D8:E4) [15:22:27:667]: Executing op: FileCopy(SourceName=SETTIN~2.CON|customXML,SourceCabKey=customXML,DestName=customXML,Attributes=16384,FileSize=2633,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,,,InstallMode=16908288,HashOptions=0,HashPart1=-1992414570,HashPart2=1238809189,HashPart3=-80616146,HashPart4=146746036,,)
MSI (s) (D8:E4) [15:22:27:667]: File: c:\WINDOWS\system32\config\systemprofile\Application Data\customXML;
Won't Overwrite; Won't patch;
Existing file is unversioned and unmodified - hash matches source file
Limited user repair log reads:
MSI (s) (78:8C) [15:26:27:406]: Executing op: FileCopy(SourceName=SETTIN~2.CON|customXML,SourceCabKey=customXML,DestName=customXML,Attributes=16384,FileSize=2633,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,,,InstallMode=16908288,HashOptions=0,HashPart1=-1992414570,HashPart2=1238809189,HashPart3=-80616146,HashPart4=146746036,,)
MSI (s) (78:8C) [15:26:27:406]: File: c:\Documents and Settings\test\Application Data\customXML;
To be installed; Won't patch;
No existing file
Your suggestions will be very much appreciated.

Hello,
Did you ever get to the root cause of this?
I have a similar problem with a custom XML that is reported as "empty or is not a xml file." in the logs.
Wondered if you had found the root cause?
Kind regards,
Sio.

Using the same itunes account for two users on the same macbook pro

Hi all. I purchased a macbook pro in september (which I have absolutely adore), but because my semester was so jam packed with work, I wasn't able to take it in for my data transfer until the Christmas season. Everything was transferred correctly, but for some reason the transfer leaves me with two different users on the same macbook. I don't really have any problem with this, except I want to access the music from the "old user" with the new user that I have been using since I purchased the macbook. Is there any way that I can move my music from one user to another? Bear in mind that I only have one itunes account, and almost all of this music was purchased legally through itunes (I had some old cd's that I transferred back when I first bought the original macbook back in 07). Thank you!

I'm assuming that you want to get both your purchased music AND your ripped CD's back into the New iTunes Library. If you use iCloud to re-download all your purchased music, TV, apps and books you wont get your CD's or movies back; and you'll use up a lot of internet bandwidth and time to re-download everything. So, I'm going to give you a way to get the music and everything else off the hard drive into your new iTunes Library.
But, I need some clarification here. I'm assuming that you recently used Migration Assistant to move your old Mac's user account to the new Mac, so when you turn on the new Mac you have a choice to log in as either the "Old_User" or the "New_User", or something like that. And both user acounts are using the same iTunes music store Apple ID, right?
And, I'm assuming that you have both accounts set up with your iCloud or MobileMe information, so they have the same info in the contacts, calandars, bookmarks, and notes. If you didn't use iCloud to load this info to the new user, then importing your old contacts, calendars, bookmarks and such will require an extra few steps, and is a different process entirely (composed of exporting the data from each of those apps while logged in as the Old User, and then importing them while logged in as the New User).
I'm assuming that the main differences in the two accounts will be that your old documents, old downloads, old email, old iPhoto and old iTunes library are not merged with the new ones, right? Apples Migration Assistant would have merged the Mac Apps folder and copied over all the Shared Users documents if it was done right. I'm also assuming that you kept your old iTunes Library in your Old User account and not in the Shared Users folder, right?
If that's the case, first decide which account will become the primary account that you you will use all the time from this point forward. You may want to choose the account that has the most recent work that you have done with the computer over the past semester since it's set up the way you like it, or the account that has the largest amount of data and history that you don't want to move. The next step will be done by first logging into whichever account you wont be using in the future (except to access old info that can't be moved).
If you are happy with how it's working now and just want to move your old documents, photos, and music over to the new account, then it seems to me that it would help things if you first log in as your "Old User" name" and move (or copy) your old documents, downloads, iPhoto Library, and iTunes library to the Shared Users folder.
I would basically move everything important in the Old User's home folder to the Shared Users folder, keeping the files in the proper subfolders like "Music" "iTunes" "Pictures" "Movies" "Documents" "Downloads" etc... However, if your New iTunes Library or New iPhoto Library and such are already in the Shared User's folder, make sure you don't replace them with the old ones, by renaming the old ones first (maybe add the word "old" to the name.
Mind you, when you have moved everything, and you log out of the Old User acount, and then log in as the New User, you will usually have to enter any administrator's User name and password whenever you want to make changes to those old documents while logged in as the New User. Before going forward you should first change the User Permissions of those files to let the New User "own" them, so it will stop asking you for a name and password every time you want to access them in the future.
EVERYTHING from this point forward assumes that you are now logged in as the New User, and you should not ever need to log in as the Old User, except to access your old email archives or old Keychain Access to find stored passwords (which I think are stored in the Old User's "Library" folder which is invisible and inaccessable in Lion). I don't know how to merge old saved emails or keychain passwords into the new account (mobile me can sync the keychains or mail rules/accounts, but iCloud can't, and mobile me doesn't sync the actual emails that were downloaded since 2007).
First, to change the "Sharing & Permissions" to the New User just select "Get Info" for any old document or enclosing folder that need their permissions changed to the New User, click on the little lock icon at the bottom right of the Get Info Window, authenticate with any Administrator's Name and Password, and click okay. If it shows your New User name as "Read Only" change that to "Read and Write". If your New User name is not in the list, click the "+" icon on the bottom left and select the New User name, and set it for Read and Write. Sometimes you have to do this "+" user step more than once to get it to stick.
Then, after your New User name shows it's set for "Read & Write", with your New User name still selected, click on the little "cog-wheel" icon next to the +/- buttons, and choose "Apply to Enclosed Items". The computer could take a long while to finish changing the permissions if there are a lot of files in the folder you changed, so be patient. When it's done you should "own" all the files in that old folder as the new user. You are now ready to proceed with importing the old music into the New iTunes library.
First launch iTunes (still as the New User), and go to File > Preferences > Advanced. Make sure iTunes is set to "keep itunes media folder organized" and "copy filkes to itunes media folder". Click okay. It may open a small window showing that things are being moved and organized, with a progress bar, and then it's done. It wont do that if you are already organized and copied.
At this point, you could simply locate your old iTunes music folder in the Finder and drag the Finder folder onto the open iTunes app window and let go of the trackpad button when the cursor changes to a green "+" sign, and it will import and copy everything into the new iTunes Library. When it's done you can delete the old Music folder in the Finder (not in iTunes). However, you may not have enough hard drive space to make the copies, and it will be much slower than if you move the files in the finder before you import them. You may still have duplicates of your ripped music that you added to the new iTunes Library, and can delete those from within iTunes.
My step to get the old music to show up in the New iTunes Library by moving them instead of copying them will be done in a particular way, that will avoid having the entire old music folder left behind to take up space on your hard drive, and it will make the import process significantly faster. You are basically going to use the Finder to move the old music folder into the New iTunes Media folder, but you need to do it in such a ways as to not overwrite the new stuff.
So, before you move your old iTunes Music folder into the new iTunes media folder, rename the old Music folder with the word "old" in it, then move that folder into your current iTunes Media folder. Move it, don't copy it. If the Mac forces you to copy it, once it's done you can delete the old music's original folder, after you confirm it's all there in the copied folder. This sometimes happens when you move files from Shared Users that you haven't changed the ownership properly before the move. Now when you drag the old music folder onto the iTunes App window, since the files are already in the iTunes Media Folder it will not copy the files but will simply move them around and organize them inside the new iTunes Music folder.
You can repeat these steps with the old Movies, TV shows, Apps and Books, or whatever you want to move to the new iTunes Music Library.
I don't know how to "merge" the old iPhoto Library with the new one, but when you click on iPhoto in the dock while holding down the option key while you click, it will let you choose which iPhoto Library to open. From a dialog box you can choose the old one, which you copied to the Shared Users folder earlier. It's possible that a similar technique of dragging the old iPhoto library older on top of the iPhoto App window would import things, but you'd need to research that first.
I wish I had more time to proof-read this answer, but I have to go to a meeting, but can check back later for questions.

Accounting for anyconnect users

hi,
is it possible to do accounting for normal anyconnect users? i.e. accouting for anyone who is logged on to the network using anyconnect?

Hi,
Check out VPNTTG (VPN Tunnel Traffic Grapher) is a software for SNMP monitoring and measuring the traffic load for IPsec (Site-to-Site, Remote Access) and SSL (With Client, Clientless) VPN tunnels on a Cisco ASA. It allows the user to see traffic load on a VPN tunnel over time in graphical form.
Advantage of VPNTTG over other SNMP based monitoring software's is following: Other (commonly used) software's are working with static OID numbers, i.e. whenever tunnel disconnects and reconnects, it gets assigned a new OID number. This means that the historical data, gathered on the connection, is lost each time. However, VPNTTG works with VPN peer's IP address and it stores for each VPN tunnel historical monitoring data into the Database.
For more information about VPNTTG please visit www.vpnttg.com

Sharing Music: using one iTunes account for two users on one MacBook Air

I'm trying to set up my parents on their new MacBook Air and I have set up an account for each of them. To keep their music collection simple & compact I want them both to use one iTunes account on the one machine. Can two separate users work off the same iTunes account on the one machine?
I have tried the Home Sharing function but this seems to be for separate machines rather than accounts.
I have also tried putting the music into a shared folder but this hasn't worked properly for me as the secondary account is able to purchase (but not download) the music correctly from iTunes.
Any help appreciated. Thank you.

I'm trying to set up my parents on their new MacBook Air and I have set up an account for each of them. To keep their music collection simple & compact I want them both to use one iTunes account on the one machine. Can two separate users work off the same iTunes account on the one machine?
I have tried the Home Sharing function but this seems to be for separate machines rather than accounts.
I have also tried putting the music into a shared folder but this hasn't worked properly for me as the secondary account is able to purchase (but not download) the music correctly from iTunes.
Any help appreciated. Thank you.

Setting up accounts for multiple users

Suggestions for allowing multiple users to access one account to avoid having to reimburse folks for every download on their work iPads?

short answer, no. Mail.app does not have support within itself for multiple user accounts. It displays the messages from the mailboxes of the user that is currently logged in. so if you want multiple people to read their mail on the same mac without being able to read other users' mail, you will need to set up multiple user accounts. alternatively, use another client. i think thunderbird supports multiple mail accounts under the same user account. hope this helps.

Can we assign account for anonymous user

Hi,
Is this possible to assign account for the anonymous user using idoc script or by any rule concept.??
Thanks,
Abhijit

There is no straightforward out of the box way to do this.
Accounts are instrinsically linked directly to a user and not a role. There is a DefaultNetworkAccounts config variable but this only applies to users who have logged in.
Two options are
1) a Java filter on 'alterUserCredentials' there is an example of this in the HowToComponents SecurityFilter
2) User Credential Mapping (Not used this on 11g)
Go to Administration > Credential Maps
Create a new map with a Map Identifier of myMap
Add the following lines to the map
|#all|, %%
@|#all|, @%%
guest, @your_account(R)
Add the following to config.cfg and restart
ExternalCredentialsMap=myMap
This should pull through all other existing roles/accounts and for guests it should give them R permissions to your_account
Not tested it but from memory this should work
Enjoy
Tim

AAA accounting for per-user data amount limit

Similar Messages

Maybe you are looking for