AAA Model for CATOS

I've been trying to find AAA model access configs for 2950's running CATOS. Are there any command references I can review to add radius authentication to the catos similar to IOS12.x?
Thanks.
IOS AAA MODEL:
username adin priv xx password xxx
username admin priv xx password xxx
service password-encryption
aaa new-model
aaa authentication login default local-case radius
aaa authorization exec default local radius if-authenticated
radius-server host 192.1.1.1
radius-server timeout 2
radius-server key pwd111

Hi Friend,
2950 is not at all a CATOS switch it is again an IOS switch.
I think you may be having 2948G or someother switch having CATOS like 4k or 6k.
If you are looking for AAA config or infact to be more precise radius configs for CATOS switch have a look at this link
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/8_1/config/authent.htm#1020746
hope thats helps , if yes please rate the post.
Ankur

Similar Messages

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Create a VC Model for BEx queries with Cell Editor

Hello All,
I am trying to create a VC Model for BEx queries with Cell Editor.
BW Development Team has created a BEX query with complex restrictions and calculations using Cell Editor feature of BI-BEX.
The query output in BEx analyzer is correct where all values are being calculated at each Cell level and being displayed.
But, while creating VC model, system is not displaying the Cells.Thus, no VC Model can be created.
I have executed below steps:
1. Created a VC Model for BEx Query - ZQRY_XYZ
2. Create Iview -> Create a dataService -> Provide a Table from the Output
In the Column field system is not showing any of the Cells (present in Cell Editor)
Please help me to solve this issue.
Thanks,
Siva

Hi
If 'Cell Editor' is been used then that query must have the structure in it. You have to select that 'structure' object in your 'VC Table'.
If you select that then you will get the required result in the output. This structure will be the structure where 'cell reference' is used in BI query, You have to select that structures name.
Regards
Sandeep

Create adaptive web service model for a web dynpro project

I have been trying to create a new new adaptive web service model for a web dynpro project.I am using the URL of the wsdl file to create the model. I have copied the url link of the wsdl from the overview tab of the web services navigator. The web service works fine when tested through the Netweaver Navigator. This web service has also been used successfully through the Visual Composer. But when I try to create a model for this web service URL, when I click the Next button after entering the URL in the model creation wizard step 4 , I get "Error loading wsdl file. Check error log for details" Given below is the exception recorded in the error log: (Infact, I get this for all wsdl URLs)
!MESSAGE Jun 6, 2007 9:44:59 AM           com.sap.ide.webdynpro.ui.service.ServicesUI          [Thread[main,5,main]] Error: Internal error
   Plugin name: Web Dynpro Model Editor
   Plugin ID : com.sap.ide.webdynpro.modeleditor
   Class      : com.sap.ide.webdynpro.modeleditor.wizards.model.creation.PageRenameWS
   Method     : loadNameSpacesAndModelClasses
   Message    : Cannot load NameSpaces and ModelClasses
Class Path: C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.cmi_1.0.0/_cmi_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.exception_2.0.0/lib/exception.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/boot.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/iq-lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/util.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/tc_sec_wssec_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.runtime_2.0.0/lib/SapDictionaryTypesRuntime.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.services_2.0.0/lib/SapDictionaryTypeServices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/logging.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/loggingStandard.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/jARM.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.xmltoolkit_2.0.0/lib/sapxmltoolkit.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/activation.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxm-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/saaj-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxrpc-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jnet.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jsse.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/mail.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.webdynpro.model.webservice_2.0.0/lib/_webdynpro_model_webservice.jar;
java.home: C:\java\j2sdk1.4.2_09
proxyHost:
proxyPort:
nonProxyHosts:
Temporary Directory: C:\DOCUME1\E51914\LOCALS1\Temp\
WSDL URL: http://etcvpcod108:50100/UserService/Config5?wsdl
   Exception : com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for WSDL URL http://etcvpcod108:50100/UserService/Config5?wsdl and service factory configuration {DynamicProxy.ClassPath=C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.cmi_1.0.0/_cmi_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.exception_2.0.0/lib/exception.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/boot.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/iq-lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/util.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/tc_sec_wssec_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.runtime_2.0.0/lib/SapDictionaryTypesRuntime.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.services_2.0.0/lib/SapDictionaryTypeServices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/logging.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/loggingStandard.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/jARM.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.xmltoolkit_2.0.0/lib/sapxmltoolkit.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/activation.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxm-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/saaj-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxrpc-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jnet.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jsse.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/mail.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.webdynpro.model.webservice_2.0.0/lib/_webdynpro_model_webservice.jar;, DynamicProxy.INetProxy.Bypass=, DynamicProxy.INetProxy.Port=, DynamicProxy.Javac.path=C:\java\j2sdk1.4.2_09, DynamicProxy.TempDir=C:\DOCUME1\E51914\LOCALS1\Temp\, DynamicProxy.INetProxy.Host=}
!STACK 0
com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for WSDL URL 'http://etcvpcod108:50100/UserService/Config5?wsdl' and service factory configuration '{DynamicProxy.ClassPath=C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.cmi_1.0.0/_cmi_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.exception_2.0.0/lib/exception.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/boot.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/iq-lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/util.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/tc_sec_wssec_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.runtime_2.0.0/lib/SapDictionaryTypesRuntime.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.services_2.0.0/lib/SapDictionaryTypeServices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/logging.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/loggingStandard.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/jARM.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.xmltoolkit_2.0.0/lib/sapxmltoolkit.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/activation.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxm-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/saaj-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxrpc-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jnet.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jsse.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/mail.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.webdynpro.model.webservice_2.0.0/lib/_webdynpro_model_webservice.jar;, DynamicProxy.INetProxy.Bypass=, DynamicProxy.INetProxy.Port=, DynamicProxy.Javac.path=C:\java\j2sdk1.4.2_09, DynamicProxy.TempDir=C:\DOCUME1\E51914\LOCALS1\Temp\, DynamicProxy.INetProxy.Host=}'
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:413)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.readOperationsFromWSDL(WSModelInfo.java:371)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadataInternal(WSModelInfo.java:341)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadata(WSModelInfo.java:305)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadata(WSModelInfo.java:315)
     at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.PageRenameWS.loadNameSpacesAndModelClasses(PageRenameWS.java:435)
     at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelDialog.nextPressed(ModelDialog.java:105)
     at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:316)
     at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
     at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
     at org.eclipse.jface.window.Window.open(Window.java:563)
     at com.sap.ide.webdynpro.modeleditor.ModelEditorCallback.createModel(ModelEditorCallback.java:52)
     at com.sap.ide.webdynpro.service.modeleditor.ModelService.createModelWithUI(ModelService.java:70)
     at com.sap.ide.webdynpro.service.modeleditor.ServiceWithUI.createModel(ServiceWithUI.java:49)
     at com.sap.ide.webdynpro.tsmodel.application.provider.ModelNodeProvider.createUniqueName(ModelNodeProvider.java:55)
     at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntityUin(EntityImpl.java:936)
     at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntity(EntityImpl.java:502)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.runInternal(CreationAction.java:76)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.access$000(CreationAction.java:24)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction$1.run(CreationAction.java:51)
     at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.run(CreationAction.java:57)
     at com.sap.ide.webdynpro.projectbrowser.actions.PBCreateModelAction.run(PBCreateModelAction.java:95)
     at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:224)
     at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
     at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1407)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
     at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
     at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
     at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model. See nested exception for details.
     at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:149)
     at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.<init>(DGenericServiceImpl.java:49)
     at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:71)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:411)
     ... 53 more

Hi Srikanth,
My version was
Version: 7.0.09
Build id: 200608262203
I was able to successfully import the model after I did the following
1. Re intsall Studion (same version , same build)
2. Reset the proxy settings to not use Proxy server
Thanks for looking into it though...
-Lakshmi

Creating a model for jTable in JDeveloper..

Hi everybody,
I have a little problem about making a model for my jTable.
Previously i've been using Netbeans and i had no problem about table models.
Object[][] data={{" "," "," "," "}};
String[] columnNames = {"Pers_no","Name","Surname","Position"};
model = new javax.swing.table.DefaultTableModel(data, columnNames);
jTable1.setModel(model);
I've been using this code sample to generate model.but this code doesn't work in JDeveloper.
Indeed it gives no error but when i execute there appears no column name in my jTable.
Has anyone got idea how can i generate table model??
Or why this code doesn't work?
Please give me some sample code that works in JDeveloper...
Thank you.
Onur

Onur,
Oracle JDeveloper also has a technologies known a JClient that handles the binding for you. Not sure if your requirement is to handle table models yourself, but if it is for database data retrieval then JClient is more efficient.
Frank

An error occurred while loading the model for the item or data source 'EntityDataSource'.

Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances.
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan Kumar

I'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error: "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server. The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1. Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running. It should be version 11.0.3000 or greater. If it's not, you have the wrong "SP1" installed. The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed. You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases. Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!

While running dcdiag /test:dns getting Warning: The AAAA record for this DC was not found

DCDIAG /test:dns result is pested here.
C:\Users\administrator.SUD>dcdiag /test:dns
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = MUM-ADS-01
   * Identified AD Forest.
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\MUM-ADS-01
      Starting test: Connectivity
         ......................... MUM-ADS-01 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\MUM-ADS-01
      Starting test: DNS
         DNS Tests are running and not hung. Please wait a few minutes...
         ......................... MUM-ADS-01 passed test DNS
   Running partition tests on : ForestDnsZones
   Running partition tests on : DomainDnsZones
   Running partition tests on : Schema
   Running partition tests on : Configuration
   Running partition tests on : sud
   Running enterprise tests on : sud.in
      Starting test: DNS
         Test results for domain controllers:
            DC: MUM-ADS-01.sud.in
            Domain: sud.in
               TEST: Basic (Basc)
                  Warning: The AAAA record for this DC was not found
               TEST: Forwarders/Root hints (Forw)
                  Error: Root hints list has invalid root hint server:
                  a.root-servers.net. (198.41.0.4)
                  Error: Root hints list has invalid root hint server:
                  b.root-servers.net. (128.9.0.107)
                  Error: Root hints list has invalid root hint server:
                  c.root-servers.net. (192.33.4.12)
                  Error: Root hints list has invalid root hint server:
                  d.root-servers.net. (128.8.10.90)
                  Error: Root hints list has invalid root hint server:
                  e.root-servers.net. (192.203.230.10)
                  Error: Root hints list has invalid root hint server:
                  f.root-servers.net. (192.5.5.241)
                  Error: Root hints list has invalid root hint server:
                  g.root-servers.net. (192.112.36.4)
                  Error: Root hints list has invalid root hint server:
                  h.root-servers.net. (128.63.2.53)
                  Error: Root hints list has invalid root hint server:
                  i.root-servers.net. (192.36.148.17)
                  Error: Root hints list has invalid root hint server:
                  j.root-servers.net. (192.58.128.30)
                  Error: Root hints list has invalid root hint server:
                  k.root-servers.net. (193.0.14.129)
                  Error: Root hints list has invalid root hint server:
                  l.root-servers.net. (198.32.64.12)
                  Error: Root hints list has invalid root hint server:
                  m.root-servers.net. (202.12.27.33)
               TEST: Delegations (Del)
                  Error: DNS server: sud-ad.sud.in. IP:<Unavailable>
                  [Missing glue A record]
               TEST: Records registration (RReg)
                  Network Adapter
                  [00000006] Intel(R) PRO/1000 MT Network Connection:
                     Warning:
                     Missing AAAA record at DNS server 10.1.6.132:
                     MUM-ADS-01.sud.in
                     Warning:
                     Missing AAAA record at DNS server 10.1.6.132:
                     gc._msdcs.sud.in
                     Warning:
                     Missing AAAA record at DNS server 10.1.6.133:
                     MUM-ADS-01.sud.in
                     Warning:
                     Missing AAAA record at DNS server 10.1.6.133:
                     gc._msdcs.sud.in
               Warning: Record Registrations not found in some network adapters
         Summary of test results for DNS servers used by the above domain
         controllers:
            DNS server: 128.63.2.53 (h.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 128.63.2.53
            DNS server: 128.8.10.90 (d.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 128.8.10.90
            DNS server: 128.9.0.107 (b.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 128.9.0.107
            DNS server: 192.112.36.4 (g.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.112.36.4
            DNS server: 192.203.230.10 (e.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.203.230.10
            DNS server: 192.33.4.12 (c.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.33.4.12
            DNS server: 192.36.148.17 (i.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.36.148.17
            DNS server: 192.5.5.241 (f.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.5.5.241
            DNS server: 192.58.128.30 (j.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.58.128.30
            DNS server: 193.0.14.129 (k.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 193.0.14.129
            DNS server: 198.32.64.12 (l.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 198.32.64.12
            DNS server: 198.41.0.4 (a.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 198.41.0.4
            DNS server: 202.12.27.33 (m.root-servers.net.)
               1 test failure on this DNS server
               PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 202.12.27.33
         Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
            Domain: sud.in
               MUM-ADS-01                   PASS WARN FAIL FAIL PASS WARN n/a
         ......................... sud.in failed test DNS

Hi Meinolf,
Please find the IP Details as well as DNS test results.
C:\Users\Administrator.SCI>dcdiag /test:dns
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = MDCDCDNS
   * Identified AD Forest.
   Done gathering initial info.
Doing initial required tests
   Testing server: MDC-Powai\MDCDCDNS
      Starting test: Connectivity
         ......................... MDCDCDNS passed test Connectivity
Doing primary tests
   Testing server: MDC-Powai\MDCDCDNS
      Starting test: DNS
         DNS Tests are running and not hung. Please wait a few minutes...
ERROR: NO DNS servers for IPV6 stack was found
         ......................... MDCDCDNS passed test DNS
   Running partition tests on : ForestDnsZones
   Running partition tests on : DomainDnsZones
   Running partition tests on : Schema
   Running partition tests on : Configuration
   Running partition tests on : sci
   Running enterprise tests on : sci.com
      Starting test: DNS
         Test results for domain controllers:
            DC: MDCDCDNS.sci.com
            Domain: sci.com
               TEST: Basic (Basc)
                  Warning: The AAAA record for this DC was not found
               TEST: Records registration (RReg)
                  Network Adapter
                  [00000009] Microsoft Virtual Network Switch Adapter:
                     Warning:
                     Missing AAAA record at DNS server 10.64.7.32:
                     MDCDCDNS.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.64.7.32:
                     gc._msdcs.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.64.7.35:
                     MDCDCDNS.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.64.7.35:
                     gc._msdcs.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.20.33.72:
                     MDCDCDNS.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.20.33.72:
                     gc._msdcs.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.20.33.71:
                     MDCDCDNS.sci.com
                     Warning:
                     Missing AAAA record at DNS server 10.20.33.71:
                     gc._msdcs.sci.com
               Warning: Record Registrations not found in some network adapters
               MDCDCDNS                     PASS WARN PASS PASS PASS WARN n/a
         ......................... sci.com passed test DNS
C:\Users\Administrator.SCI>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : MDCDCDNS
   Primary Dns Suffix . . . . . . . : sci.com
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : sci.com
Ethernet adapter Local Area Connection 7:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : External Internal Virtual Network
   Physical Address. . . . . . . . . : 00-14-4F-CA-83-AC
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 10.64.7.32(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.64.7.1
   DNS Servers . . . . . . . . . . . : 10.64.7.32
                                       10.64.7.35
                                       10.20.33.72
                                       10.20.33.71
   NetBIOS over Tcpip. . . . . . . . : Disabled
Ethernet adapter Local Area Connection 6:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : TEAM : Team #1
   Physical Address. . . . . . . . . : 00-14-4F-CA-83-AC
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Autoconfiguration IPv4 Address. . : 169.254.105.163(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.0.0
   Default Gateway . . . . . . . . . :
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 8:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : isatap.{2D5A4A27-298F-48E5-A376-EA886EF1E
42A}
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 9:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : isatap.{14FA7CD4-8B69-4C86-A58B-056793B7D
901}
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Please check and revert back for any queries..
Thanks...
Deva Self-trust is the first secret of success.

Getting the following error while creating the model for webdynpro app.

Plugin Name: Web Dynpro Model Editor Services
Plugin ID : com.sap.ide.webdynpro.service.modeleditor
Class :ap.ide.webdynpro.modeleditor.wizards.model. creation.ModelDialog
Method : nextPressed
Exception : org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NoClassDefFoundError)
This is the error i am getting while creating the model for the webdynpro application. Can some one help ?
Thanks & Regards
Lalith

hi
This error occurs mainly due to the reason that particular plugin is not there in the NWDS.
So please try to reinstall the NWDS or try tracing out whether that particular plugin is there or not.
Thank,
kris

Unable to get the SharePoint 2013 List names using Client object model for the input URL

Please can you help with this issue.
We are not able to get the SharePoint 2013 List names using Client object model for the input URL.
What we need is to use default credentials to authenticate user to get only those list which he has access to.
clientContext.Credentials = Net.CredentialCache.DefaultCredentials
But in this case we are getting error saying ‘The remote server returned an error: (401) Unauthorized.’
Instead of passing Default Credentials, if we pass the User credentials using:
clientContext.Credentials = New Net.NetworkCredential("Administrator", "password", "contoso")
It authenticates the user and works fine. Since we are developing a web part, it would not be possible to pass the user credentials. Also, the sample source code works perfectly fine on the SharePoint 2010 environment. We need to get the same functionality
working for SharePoint 2013.
We are also facing the same issue while authenticating PSI(Project Server Interface) Web services for Project Server 2013.
Can you please let us know how we can overcome the above issue? Please let us know if you need any further information from our end on the same.
Sample code is here: http://www.projectsolution.com/Data/Support/MS/SharePointTestApplication.zip
Regards, PJ Mistry (Email: [email protected] | Web: http://www.projectsolution.co.uk | Blog: EPMGuy.com)

Hi Mistry,
I sure that CSOM will authenticate without passing the
"clientContext.Credentials = Net.CredentialCache.DefaultCredentials" by default. It will take the current login user credentials by default. For more details about the CSOM operations refer the below link.
http://msdn.microsoft.com/en-us/library/office/fp179912.aspx
-- Vadivelu B Life with SharePoint

Error (Data mining): The specified mining structure does not contain a valid model for the current task.

I'm trying to run the Cross validation report on a mining structure that contains just Microsoft Association Rules mining model. In Target Attribute, I've tried:
Actual(Service Description).SE value
Actual([Service Description]).[SE value]
Actual(Service Description)
Actual([Service Description])
just because i don't know what is the exact correct format, but none of them worked, and I always get the following error:
Error (Data mining): The specified mining structure does not contain a valid model for the current task.
the following is my mining model structure

Association rules does not allow for cross-validation
Mark Tabladillo PhD (MVP, SAS Expert; MCT, MCITP, MCAD .NET) http://www.marktab.net

IMPORT_FUNCTION in content model for Records management

Hello!
I customized my own content model for documents with my own attributes, it works fine, and everything is ok... but when i define property IMPORT_FUNCTION in DMWB for my content model, it has dump with error "DP_ERROR_GENERAL" when i'm trying to save the new created document... Even if i set function without code for attribute IMPORT_FUNCTION, it still has dump... why?
i need to get info about uploaded file, such as path and etc... i have found this information only in this function.
Thanks for any help...

Hi Luk,
The linkage of module may be very critical. But if you have a requirement for attaching the documents like photo,certificates or other documents related to employee to records management then you can create a radio button to recodrs management screen with help of abap'r and directly attach these documents to respective records management screen.
for linkage it may not feasible or much critical.
Hope this will help.
Regards,
Ravindra

Account assignment model for customer line items

Hi all
As per SAP, account assignment models can be used for creating the entries for GL accounts. I have a scenario which requires similar type of feature for Customer and vendor items also..
Is it possible to create an account assignment model for Customer and vendor line items..with posting key 01..?
Thanks and Regards
Rakesh

Hi,
Account assignment model is created using transaction code FKMT. It does allow using posting key 01, however unlike in GL Account - Customer accounts will not be always same. Hence, normally used for GL postings.
In case if you are going to use for the same Customer / Vendor Account you can try it using transaction code FKMT.
Thanks
Murali.

Updating model for pivot table in af:iterator

Using Master Detail relationship, i am trying to create multiple forms at runtime. I want to show all the forms at once. Each form has some header fields and a pivot table. Header field is coming from master table and pivot table should be made from child.
I am using af:iterator to iterate over master table rows and show header:
<af:iterator id="i1"
            value="#{bindings.MasterTableVO.collectionModel}" var="row"
            varStatus="index"> For pivot table, i dragged Child View Object from Data Controls to make pivot table.
<dvt:pivotTable id="pivotTable1"
          value="#{bindings.ChildTableVO.pivotTableModel}"
          summary="pivot table" sizing="auto"
          pivotEnabled="false" drillingEnabled="false"/>                                    Now while iterating, i am not able to get updated model for pivot table. Values from Master table are being updated, but pivot table from child table showing details corresponding to the first row of master table everywhere.
So can you please help me, how to get the updated pivot table model corresponding to the current row in parent iterator ?
I am using JDeveloper 11.1.1.6.0
Thank You.
VS

Hi Aswini ,
I didnot worked for me. I need to change the usecase a bit..
however you can eaisly display the af:table inside iterator in readonly mode, but when you perform crud operations inline then it gives problems..
Can you explain your usecase.
Regards,
Santosh.

MIG : K7 - DDR3 - 1600 MHz - IBIS Model for addr/cmd with VccAux = 2.0V

Hi everybody !
I have a problem in the generation of my IBIS file...
I'm using Vivado 2015.1 and MIG v2.3. My FPGA is xc7k325tffg900-2.
In the xdc file (generated by the MIG), I have this type of constraint for all of my address and control signals :
# PadFunction: IO_L8P_T1_33
set_property VCCAUX_IO HIGH [get_ports {ddr3_addr[0]}]
set_property SLEW FAST [get_ports {ddr3_addr[0]}]
set_property IOSTANDARD SSTL15 [get_ports {ddr3_addr[0]}]
set_property PACKAGE_PIN AC12 [get_ports {ddr3_addr[0]}]
It therefore seems logical to me that when I try to generate my IBIS file, it tries to find the SSTL15_F_AUX20_HP model for these signals. But this model does not exist !!!
Two questions :
Is it normal to have the property "VCCAUX_IO HIGH" for cmd/addr signals ?
Can I use SSTL15_F_HP model (which exists) instead ?
Many Thanks
Arnaud

Hi Vinay,
Thanks for the answer ! It seemed logical to me but I wanted to make sure.
In that case, why the SSTL15_F_AUX20_HP model is not defined in the Xilinx IBIS file for the Kintex-7 ?
Electrical standard is SSTL15 (DDR3), my slew is Fast, we are in HP bank and my VccAux_IO = 2.0V.
And if the SSTL15_F_AUX20_HP model is equivalent to the SSTL15_F_HP so the VCCAUX_IO HIGH property has no effect ...
I can not believe I'm the only one to ask ...
Arnaud

Downloaded a spanish speech analysis model for Premier CC but it appears as if it has not been applied to the settings, I cannot select spanish in the analyze window.

I just downloaded a Spanish speech analysis model for premier cc, installed it, restarted premier, started a new project, did both multiple times, even reinstalled the model and I still cannot select Spanish as a language to be analyzed in a project... Any ideas?
-Cheers

Nevermind. I finally found a third party answer and will post it for anyone else with my problem.
>Go to the iTunes store.
>Halfway down the page, right hand side, says account
>Under account it says purchaced, select that
>Wa-la

AAA Model for CATOS

Similar Messages

Maybe you are looking for