Aaagh! Help needed with tabs, I just don't get how to use them.

I have done a search for a beginners guide on how to make the following setting, without any luck, so I felt the need to start a new topic.
I am writing a contents page for a collection of poetry and I have (so far) written out those contents so they are aligned to the left of the page. So there is a number bullet, then the title of the poem, as follows:
1. Abend
2. Der Allwissende
3. Im hohen Alter
What I want is to put the page number for each poem (each poem has it's own page), on the same line, but aligned to the right side of the page. Like this:
Introduction +Page 5+
1. Abend 6
2. Der Allwissende 7
3. Im hohen Alter 8
I should mention in case it's relevant, I am using text boxes for the contents pages.
Hoping someone can help soon.

Do as you have done. Set the lists style to "None".
Then simply click on the ruler where you want to have tabs. To change the tab to left/right/centred or decimal keep clicking on the tab or right mouse click on the tab and choose which you want.
So to create what you say you need, going from left to right.
1. *A right tab* to catch the right edge of the number say 1cm from the left
2. *A left tab* to catch the beginning of the text say 1.5cm from the left
3. *A right tab* or decimal tab on the far right of the ruler to catch the page number
To get rid of tabs just pull them away from the ruler and they disappear in a puff of smoke.
You will need to type a tab at the beginning of each line with a number to push it over to the first (right hand) tab.
Refinements are:
1. *Hanging indent.* This makes the number sit to the left and the following paragraph to align to the 2nd tab. Do this by sliding the left margin stack to the position of the 2nd tab, then drag the flat bar on the top back to the left margin.
2. *Leading tab.* In +Inspector > Text (4th tab) > Tabs > Click on the 3rd tab in the list > Leader > Choose line style+
Just the usual reminder that tabs are a style attached to whatever paragraph that you are in and continue on with every return until you change them to something else.
Having set up these tabs the way you like them, it would be a good idea to turn them into a named paragraph style for reuse elsewhere.
Peter

Similar Messages

  • My phone has no more storage but it says i have 5gb on icloud but i don't know how to use them.

    My phone has no more storage but it says i have 5gb on icloud but i don't know how to use them.

    iCloud storage doesn't affect the available storage on your device.  It's for backing up your device and syncing your data, so you can recover the data if needed.
    You probably need to import photos/videos to your computer or another destination (like a photo kiosk & burn CDs), and then delete them from your device.  Or, delete some unused apps from your device.

  • Hi yesterday i downloaded a software from i tunes for keyboard short cut and i don't know how to use them and install them, how to use keyboard shorts bought from i tunes

    hi yesterday i downloaded a software from i tunes for keyboard short cut and i don't know how to use them and install them, how to use keyboard shorts bought from i tunes

    You can install it on your iOS device (iPad, iPhone, iPod Touch) either by redownloading it directly on the device via the Purchased tab in the App Store app on it, or by connecting the device to your computer's iTunes and syncing it to it.
    Syncing apps from a Mac : iTunes 11 for Mac: Sync and organize iOS apps
    from a PC : iTunes 11 for Windows: Sync and organize iOS apps
    As to how to then use the app, if the description on the app's description page in the store doesn't describe how to use it in enough detail, then is there a link to the developer's website on its description page, and does that have details ?

  • I have 2 video credits and I don't know how to use them

    I have 2 video credits and I don't know how to use them

    Would it matter how much the videos are? I bought a season of a tv show two of the episodes were not able to air so I got the two credits I just don't want to accidentally buy something right now. Thanks for the responses though that is what I thought I had to do.

  • I have a SanDisk 2.0GB Sansa. I know it is old but it still works I just don't know how to use it. Anybody? Help?

    I haven't searched for a manual for the Sansa...guess that would be helpful!  I haven't had a pc for very long so I am learning as I go.  Haven't even figured out how to burn a CD...just haven't had time to do some searching.  If you have any suggestions for me it would be greatly appreciated.  Thanks!

    Hopefully, you are asking how to use it with a Mac, not a "pc."    And you do know that Apple does not make those, right...?
    Are you asking how to put music on it?  For most music players that are not iPods, I think you manually drag and drop music files onto the player, using your Mac.  So I'd try connecting the Sansa to USB.  Does it appear on the Mac's Desktop as a disk (or in a Finder window's sidebar)?  If so, open it.  There may be folders inside.  If so, try dragging the and dropping the song files to the appropriately named folder, to copy them to the player.
    Note:  Depending on the player, it may only play MP3 files and not AAC files, which is the type used by iTunes Store.

  • Help needed with SSmoving or deleting powered-off LM Service VMs used by host spanning

    Hi Lab Manager gurus,
    I need your help in evacuating a corrupt data store that is hosting four LM Service VMs used by host spanning.  I'm attaching screenshots as well.
    LM version: 4.0.4 on ESXi 4.1 Enterprise Plus.
    1. Even though host spanning is enabled, we don't use it or need it, so it can be disabled.
    2. I have moved all the other VMs out of this datastore using SSmove, and though the service VMs have been powered off since mid-2013, SSmove still thinks they are deployed.
    3. I tried to disable host spanning in LM, but got an error:
          Error in undeploying the virtual machine. Contact the Administrator if the problem persists.
          Virtual machine, "VMwareLM-ServiceVM-I46-H2", not found in inventory.
          Virtual machine not found in inventory.
    Along with:
          Failed to undeploy Service Virtual Machine. Try to repair the host.
    4. Repairing the host gave the error:
          Failure occurred during repair of host "xxxxxxxxxxxx.com". If this is due to an temporary failure, try repair again, otherwise unprepare and then prepare the host.
          Error in undeploying. Contact the Administrator if the problem persists.
          Error in undeploying the virtual machine. Contact the Administrator if the problem persists.
          Virtual machine, "VMwareLM-ServiceVM-I46-H1", not found in inventory.
          Virtual machine not found in inventory
    5. Unprepare option is greyed-out in the menu for the host.
    How do I make the four LM service VMs accessible again to Lab Manager so it can go ahead and disable host spanning? 
    I'm assuming disabling host spanning will get rid of these service VMs. Registering a VM in VC did not make it visible to LM - I still got the "VM not found in inventory" error.
    Would some DB updates resolve this?
    The FsDirs for these service VMs are 1, 2, 229 and 7672.
    In table DeployedFsDir I see rows for dir_ids 1,2, 229, 7672
    dir_id  vs_id
    1       1
    2       2
    229     215
    7672    6698
    Table DeployedVirtualServer has rows for vs_ids 1,2,215, 6698
    DistributedVirtualSwitch shows one DVSwitch as is_enabled = False
    Any help appreciated!
    Khare

    Hi Lab Manager gurus,
    I need your help in evacuating a corrupt data store that is hosting four LM Service VMs used by host spanning.  I'm attaching screenshots as well.
    LM version: 4.0.4 on ESXi 4.1 Enterprise Plus.
    1. Even though host spanning is enabled, we don't use it or need it, so it can be disabled.
    2. I have moved all the other VMs out of this datastore using SSmove, and though the service VMs have been powered off since mid-2013, SSmove still thinks they are deployed.
    3. I tried to disable host spanning in LM, but got an error:
          Error in undeploying the virtual machine. Contact the Administrator if the problem persists.
          Virtual machine, "VMwareLM-ServiceVM-I46-H2", not found in inventory.
          Virtual machine not found in inventory.
    Along with:
          Failed to undeploy Service Virtual Machine. Try to repair the host.
    4. Repairing the host gave the error:
          Failure occurred during repair of host "xxxxxxxxxxxx.com". If this is due to an temporary failure, try repair again, otherwise unprepare and then prepare the host.
          Error in undeploying. Contact the Administrator if the problem persists.
          Error in undeploying the virtual machine. Contact the Administrator if the problem persists.
          Virtual machine, "VMwareLM-ServiceVM-I46-H1", not found in inventory.
          Virtual machine not found in inventory
    5. Unprepare option is greyed-out in the menu for the host.
    How do I make the four LM service VMs accessible again to Lab Manager so it can go ahead and disable host spanning? 
    I'm assuming disabling host spanning will get rid of these service VMs. Registering a VM in VC did not make it visible to LM - I still got the "VM not found in inventory" error.
    Would some DB updates resolve this?
    The FsDirs for these service VMs are 1, 2, 229 and 7672.
    In table DeployedFsDir I see rows for dir_ids 1,2, 229, 7672
    dir_id  vs_id
    1       1
    2       2
    229     215
    7672    6698
    Table DeployedVirtualServer has rows for vs_ids 1,2,215, 6698
    DistributedVirtualSwitch shows one DVSwitch as is_enabled = False
    Any help appreciated!
    Khare

  • HELP!!! I just don't get it...

    Hi, i hope anyone will know what's happening... I've buit the
    web site: www.rimusdesign.com and everything is just perfect on
    windows, but once i try to open it on my mac, everything seems like
    it's running 5 times smaller frame rate. also one detail, it's been
    designed on mac. plus once opened separately as a preview it works
    fine on mac too, only via browser it's got that problem.
    Has any one dealt with something simmilar?
    About SWF:
    - Used mainly ActionScript for animation
    - PNG's used for graphics
    - File size 53kb
    Browsers tried:
    Safari (mac) - slow
    Firefox (mac) - slow
    Opera (mac) - low
    IE (win) - good
    Firefox (win) - good
    Opera (win) - good
    *Also, i've got intel mac, but tried opening the web site on
    other mac's still same problem...
    Thank You!
    Rimas

    "Has any one dealt with something simmilar?"
    yes - countless times unfortunately - i hate seeing my flash
    animations on a Mac - almost any Mac
    the frame rate seems like it is cut in half.
    --> **Adobe Certified Expert**
    --> www.mudbubble.com
    --> www.keyframer.com
    RimusDesign wrote:
    > Hi, i hope anyone will know what's happening... I've
    buit the web site:
    > www.rimusdesign.com and everything is just perfect on
    windows, but once i try
    > to open it on my mac, everything seems like it's running
    5 times smaller frame
    > rate. also one detail, it's been designed on mac. plus
    once opened separately
    > as a preview it works fine on mac too, only via browser
    it's got that problem.
    >
    > Has any one dealt with something simmilar?
    >
    > About SWF:
    > - Used mainly ActionScript for animation
    > - PNG's used for graphics
    > - File size 53kb
    >
    > Browsers tried:
    > Safari (mac) - slow
    > Firefox (mac) - slow
    > Opera (mac) - low
    > IE (win) - good
    > Firefox (win) - good
    > Opera (win) - good
    >
    > *Also, i've got intel mac, but tried opening the web
    site on other mac's still
    > same problem...
    >
    > Thank You!
    > Rimas
    >

  • I'm an idiot with a 5G IPod  don't know how to use iSquint for Videos

    if I had know that I had to convert all my videos , which I have no idea on how to do it , I wouldn't have bought it . I've been reading the forums and downloaded iSquint . I click convert file optimize for iPod and automatically add to iTunes . The video shows up in iTunes in the video folder and play in the selected song box in the lower right hand corner in the iTunes , I've been trying to drag and drop them on to my iPod in the source list in iTunes but no luck , how do I get the videos onto my iPod . Thanks all .
    Clarice

    It sounds like you're going about it the right way. I also used iSquint for short videos. Handbrake is the program you want for converting DVDs.
    Are you converting MPEGs? DVDs? AVIs?
    You said they're going into iTunes correctly and play in iTunes. That's a major hurdle. So what happens when you select your video and drag it toward the video ipod in the menu bar? When you drag the video on top of your ipod's name (on the left hand Source menu bar) does it change to a plus sign? Do you get an error message when you attemp to move the files?
    Is your iPod up to date on the software? Is your iTunes the most recent version?
    More details on your problem would help us figure out the solution. Of course you can always take it to your local Apple store where they are MORE than happy to help you.

  • I have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, help

    i have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, any help would be much appreciated

    Try the other USB port. If it still doesn't show up in Disk Utility then there may be something wrong with your Mac. Try something else in each USB port and see if it is seen. If the other thing, like a USB thumb drive, does show up in disk utiltiy then the USB ports are fine.
    Power down the system and restart with the drive connected, go to DU and see it it is seen.

  • Help needed with java

    Hello everyone
    I'm a Student and new to java and I have been given a question which I have to go through. I have come across a problem with one of the questions and am stuck, so I was wondering if you guys could help me out.
    here is my code so far:
    A Class that maintains Information about a book
    This might form part of a larger application such
    as a library system, for example.
    @author (your name)
    *@version (a version number or a date)*
    public class Book
    // instance variables or fields
    private String author;
    private String title;
    Set the author and title when the book object is constructed
    public Book(String bookAuthor, String bookTitle)
    author = bookAuthor;
    title = bookTitle;
    Return The name of the author.
    public String getAuthor()
    return author;
    Return The name of the title.
    public String getTitle()
    return title;
    and below are the questions that I need to complete. they just want me to add codes to my current one, but the problem is I don't know where to put them and how I should word them, if that makes sense.
    Add a further instance variable/field pages to the Book class to store the number of pages in the book.
    This should be of type int and should be set to 0 in the Constructor.
    Add a second Constructor with signature
    public Book(String bookAuthor, String bookTitle, int noPages) so it has a third parameter passed to it as well as the author and title;
    this parameter is used - obviously?? - to initialise the number of pages.
    Note: This is easiest done by making a copy of the existing Constructor and adding the parameter.
    Add a getPages() accessor method that returns the number of pages in the book.
    Add a method printDetails() to your Book class. This should print out the Author title and number of pages to the Terminal Window. It is your choice as to how the data is formatted, perhaps all on one line, perhaps on three, and with or without explanatory text. For instance you could print out in the format:
    Title: Robinson Crusoe, Author: Daniel Defoe, Pages:226
    Add a further instance variable/field refNumber() to your Book class. This stores the Library's reference number. It should be of type String and be initialised to the empty String "" in the constructor, as its initial value is not passed in as a parameter. Instead a public mutator method with the signature:
    public void setRefNumber(String ref) should be created. The body of this method should assign the value of the method parameter ref to the refNumber.
    Add a corresponding getRefNumber() accessor method to your class so you can check that the mutator works correctly
    Modify your printDetails() method to include printing the reference number of the book.
    However the method should print the reference number only if it has been set - that is the refNumber has a non-zero length.
    If it has not been set, print "ZZZ" instead.
    Hint Use a conditional statement whose test calls the length() method of the refNumber String and gives a result like:
    Title: Jane Eyre, Author: Charlotte Bronte, Pages:226, RefNo: CB479 or, if the reference number is not set:
    Title: Robinson Crusoe, Author: Daniel Defoe, Pages:347, RefNo: ZZZ
    Modify your setRefNumber() method so that it sets the refNumber field only if the parameter is a string of at least three characters. If it is less than three, then print an error message (which must contain the word error) and leave the field unchanged
    Add a further integer variable/field borrowed to the Book class, to keep a count of the number of times a book has been borrowed. It should (obviously??) be set to 0 in the constructor.
    Add a mutator method borrow() to the class. This should increment (add 1 to) the value of borrowed each time it is called.
    Include an accessor method getBorrowed() that returns the value of borrowed
    Modify Print Details so that it includes the value of the borrowed field along with some explanatory text
    PS. sorry it looks so messey

    1. In the future, please use a more meaningful subject. "Help needed with java" contains no information. The very fact that you're posting here tells us you need help with Java. The point of the subject is to give the forum an idea of what kind of problem you're having, so that individuals can decide if they're interested and qualified to help.
    2. You need to ask a specific question. If you have no idea where to start, then start here: [http://home.earthlink.net/~patricia_shanahan/beginner.html]
    3. When you post code, use code tags. Copy the code from the original source in your editor (NOT from an earlier post here, where it will already have lost all formatting), paste it in here, highlight it, and click the CODE button.

  • Help needed with itunes

    help needed with itunes please tryed to move my itunes libary to my external hard drive itunes move ok and runs fin but i have none of my music or apps or anything all my stuff is in the itunes folder on my external hard drive but there is nothing on ituns how do i get it back help,please

    (Make sure the Music (top left) library is selected before beginning this.)
    If you have bad song links in your library, hilite them and hit the delete button. Then locate the folder(s) where your music is located and drag and drop into the large library window in iTunes ( where your tracks show up). This will force the tunes into iTunes. Before you start, check your preferences in iTunes specifically under the"Advanced" tab, general settings. I prefer that the 1st 2 boxes are unchecked. (Keep iTunes Music folder organized & Copy files to iTunes Music folder when adding to library). They are designed to let iTunes manage your library. I prefer to manage it myself. Suit yourself. If there is a way for iTunes to restore broken links other than locating one song at a time I haven't found it yet. (I wish Apple would fix this, as I have used that feature in other apps.) This is the way I do it and I have approx. 25,000 songs and podcasts and videos at present. Hope this helps.

  • I am trying to update an app, but its asking to connect to a wifi  or downlown it in itunes. I can't do either or, or maybe I just don't know how to do it. Help

    I am trying to update an app, but its asking to connect to a wifi or downlown it in itunes. There are several apps that need updating, I can't do either or, or maybe I just don't know how to do it.It's saying that the app is over 50MB. But it's not telling me which app. Help!!!!!!!!!

    Well, I just purchased Linksys wifi and hooked it up. It's running fine. When I go to my IPhone settings to see is I'm connected to a wifi, it shows that I am not connected. When I hit my wifi to see or to connect, it takes me to the wifi networks and it's showing my secured wifi as being locked and my guess wifi as not locked. How do I sign in to my own wifi network.

  • I've just brought myself a new MacBook Pro from a friend I have no idea how to use them I YouTube how to reset a MacBook Pro I done everything all we'll In till you reinstall then it say "this disk is locked"??? Can anyone help me please

    I've just brought myself a new MacBook Pro from a friend I have no idea how to use them I YouTube how to reset a MacBook Pro I done everything all we'll In till you reinstall then it say "this disk is locked"??? Can anyone help me please

    I done everything all we'll In till you reinstall
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.
    Care to share which OS you are using?
    Which MBP model do you have? 

  • HT5457 I got the 1st iPad but it needs iOS on it I don't know how to go about getting it can someone help me

    I got the 1st iPad but it needs iOS on it I don't know how to go about getting it can someone help me

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update.
     Cheers, Tom

  • Help needed with header and upload onto business catalyst

    Can someone help with a problem over a header please?
    I have inserted a rectangle with a jpeg image in  background, in the 'header' section, underneath the menu. It comes up fine on most pages when previsualised, going right to the side of the screen, but stops just before the edge on certain pages. I have double checked that I have placed it in the right place in relation to the guides on the page.
    That's one problem.
    The second problem is that I tried to upload onto business catalyst, which got to 60% and refused to go any further, saying it couldn't find the header picture, giving the title and then u4833-3.fr.png. The picture is in the right folder I have double checked. And it isn't a png. Does it have to be ?
    And the third problem is that I got an email following my upload from business catalyst in Swedish. I am living in France.
    Can anyone help ? Thanks.

    Thanks for replying,
    How can I check the preview in other browsers before I publish a provisional site with BC?
    The rectangle width issue happens on certain pages but not others. The Welecom page is fine when the menu is active, also the contact page, but others are slightly too narrow. Changing the menu spacing doesn’t help - I was already on uniform but tried changing to regular and back.
    In design mode the rectangle is set to the edge of the browser, that’s 100%browser width right?
    Re BC I have about 200 images on 24 different pages and it seems to be having difficulty uploading some of them. But it has managed a couple I named with spaces but not others I named with just one name.
    Is there an issue on size of pictures ? If I need to replace is there a quick way to rename and relink or do I have to insert the photos all over again?
    I’m a novice with Muse with an ambitious site !
    Thanks for your help.
    Mary Featherstone
    Envoyé depuis Courrier Windows
    De : Sanjit_Das
    Envoyé : vendredi 14 février 2014 22:15
    À : MFeatherstone
    Re: Help needed with header and upload onto business catalyst
    created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion 
    Hi
    Answering the questions :
    - Have you checked the preview in Muse and also in other browsers ?
    - Does the rectangle width issue happens when menu is active , or in any specific state , Try to change the menu with uniform spacing and then check.
    - In design view the rectangle is set to 100% browser width ?
    With publishing :
    - Please try to rename the image file and then relink
    - If it happens with other images as well , see if all the image names includes strange characters or spaces.
    - Try again to publish
    With e-mail from BC :
    - Under preferences , please check the country selected.
    - If you have previously created partner account in BC and selected country and language then it would follow that, please check that.
    Thanks,
    Sanjit
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6121942#6121942
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6121942#6121942
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6121942#6121942. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Help with using Adobe Muse CC at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Maybe you are looking for