AAC/MP4 track saying they are missing

I've just reinstalled Windows and iTunes (latest version), I've also coped over my iTunes library so I can keep everything the same and all my playlists etc
I've done this loads of times before (I normally re-install Windows every 3 months) and not had problems
this time though, all my AAC/MP4 tracks say they are missing in iTunes and I have to manually find each one individually even though they are where they are supposed to be. It's also done the same for a few music videos
All my other music videos and all my MP3's are fine
anyone got any ideas?

http://forums.adobe.com/community/search.jspa?peopleEnabled=true&userID=&spotlight=false&c ontainerType=14&container=3316&rankBy=date&q=%22offline+or+missing%22

Similar Messages

  • I have files that say they are missing or offline. I have checked all my folders off of lightroom and they can not be found. I have used the ? mark settings to find and still not found. I can see the images on lightroom so they have to be in my system som

    I have files that say they are missing or offline. I have checked all my folders off of lightroom and they can not be found. I have used the ? mark settings to find and still not found. I can see the images on lightroom so they have to be in my system some how. How can I retrieve these images? Is there a re boot for lightroom? Need help ASAP!

    You have probably moved the files outside of Lightroom. The images you see in LR are previews that were made before you moved the files.
    Do a search for the files/folders using your computers operating system. (Explorer/Finder)
    Once you have found them, you can point LR to the right location.

  • HT203167 Moved iTunes library from one computer to another using external hard drive.  Cannot play many files.  Says they are missing but locates them in an archive file but still won't play them.  Are the files themselves part of the .itl files?

    Moved iTunes library from old computer (PC Windows 7) to new (PC Window 8) using external hard drive.  Library listing shows all music but can only play a fraction of it.  On the ones it cannot play it asks to locate, then refers to an archived version (an .itl file), and still cannot play them.  Do I just need to copy the archived .itl over, or is that not where the actual media are (do the actual media files even exist on the new computer?)?  Any advice or information on this would be helpful.

    *Also...is there any way I can filter out all the tracks with the ! so I can delete the unplaying copies as they're taking up room in my iTunes? I know how to find duplicates, but then I have to go and delete each one individually...*
    *Thank you!*

  • I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

    I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

    Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
    It sounds like you are using two methods to upload to Facebook:
    1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
    2. Exporting pics and uploading to Facebook from the browser.
    I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
    I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
    Your problem is not with Aperture, it is using Facebook for showing your work.
    If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
    If you insist to use Facebook as your way to share your work, then your workflow should be this:
    1. Right click images you want to share.
    2. Select Export version.
    3. Export as 100% size and ensure the export settings are set at 100% quality.
    4. Upload this pic into Facebook.
    This will get you the best image size and resolution on Facebook.
    See how you go.

  • HT1386 Connected ipad to computer and downloaded 2 apps that aren't showing up on my ipad.  Says they are downloaded on itunes, but I don't see anything on my ipad. I have synced it several times. Am I missing something?

    Connected ipad to computer with usb and downloaded 2 apps that aren't showing up on my ipad.  Says they are downloaded on itunes, but I don't see anything on my ipad. Tried downloading AGAIN and it says the same thing. Downloaded but don't see them on the ipad. I have synced it several times. Am I missing something?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • How do I get images from LR to windows file when it is saying they are offline or missing?

    I loaded pictures to LR where I made some changes. They were jpegs. I deleted some in LR that went to recycle bin. Originals were in a windows file 2009-11-08. Since I did not see the LR changes in the windows pictures I decided to transfer LR images to the original file and opted to overwrite originals, might be a fatal mistake as it turns out, I am new to this. So now the originals are missing from the windows file but the images are still in lightroom but I cannot do anything with them other than view them in the library or slide show. I would like to put them back in the windows file for uploading to my blog and I am really hoping they are not missing as it tells me in lightroom. Can't see why they are missing if I am viewing them. Did try suggestion from support about adding parent file, then right clicking and locate can't remember exact procedure but I couldn't get it to work. I need help?? Thanks.

    When exporting do not over write original files in the folder where your imported files are located. In fact I understood that LR had actually disabled this in more recent versions to prevent you doing exactly what you have done. So ensure you are running the latest version of the software (help, check for updates). over writing should only be done to folders of exported images (not those in the database). The whole point of LR is non destructive processing, that is your original files remain un changed by LR and changes are only applied to exported images.
    What you need to do now is not re import but synchronise the folder. Right click (cttr click) on the affected folder in Lightroom and select synchronise folder. Check all the boxes and go ahead. This will import your exported images..as you have over written your originals unless you have backed them up then they are gone. If the are backed up, then move them into the folder using the OS file browser before synchronising.

  • I have been trying to put music I bought on I tunes on my Samsung Note 2 phone but it won't play.I try to convert them to mp3 format so I can play them on my phone but it won't let me convert them because it says they are protected. Can anybody help me?

    I have been trying to put music I bought on Itunes on my Samsung Note 2 but my media player won't play m4p files so I tried to convert the files to mp3 but I couldn't, because a message says they are protected files. I then tried downloading different media player apps to see if they would play them but had no success.Can anybody help with a solution to this problem?

    First quit iTunes and look in your iTunes folder.
    On Windows, the iTunes folder is in your My Music folder.
    On Mac, the iTunes folder is in your Music folder.
    Follow this path:    iTunes > iTunes Media > Music >
    Here there should be all your music folders. Open the folders containing the music that is not playing. Right click "get info" (mac) or right click "properties" (windows).
    This window will tell you the file type. iTunes will play music in AAC, MP3, and Lossless, etc.
    If the files are .wma you will need to convert them into ACC or MP3 format for it to play on an iPod. In iTunes, highlight the tracks that you want to convert, then on the menu bar, Advanced > Create AAC/MP3 version and the tracks will convert. Delete the old files.
    If the file extenstion is anything like .exe .txt .rar  then you don't have an audio file.

  • Referenced Images Say They are Referenced But Are Not.

    Is anyone having the following problem? I have about 4500 images that were Imported into Aperture as Referenced. Have been working with them over the past month. Tried making a Web Journal recently and after exporting the pages, many of the images did not show up in the web pages although the caption did. I went back to my Album and went through the images. The ones that didn't show up in the web pages were very strange looking within the Album. As a thumbnail they looked fine but when I put the loupe on them at 100% it was obvious that they were some sort of small jpeg or something due to lots of jaggies and poor quality. Even though the Reference icon was supposedly fine, telling me it was online since it did not have a yellow warning label, for some reason Aperture was not accessing the original RAW file.
    I now have hundreds of images I have to try and find in the Album that say they are referenced but really are not.
    Prior to this web journal problem showing up Aperture had been showing me many of these files were not online even though the drive was definitely hooked to the computer and I was able to go to the same images via the Finder and actually see that they were there. One minute the overall project registered images offline, I would click on an Album and they would register as Online. Then switch back to the Project and amazingly they register as online. Back down to the Album and it tells me they are off line. Back and forth from project to album and a different icon 50% of the time. I knew something was up.
    I eventually tracked down many of the images that said they were online but by reviewing them it was obvious they were not due to the jaggies I mentioned above. When I would find one like this I went to Manage Referenced Photos and reconnected the image even though it's telling me it is already connected. After doing this to many of the images I reproduced the web pages and they then showed up. I nearly had all the images showing up except for one that I must have missed in reconnecting so I went back to do just that. As I scrolled through the Album and the Web Journal, many of the thumbnails would turn gray and then finally an image would show up. This happened to dozens of images. I found the one that had not shown up in the last export of the web pages, reconnected it (even though it said it was connected) and then exported the web pages again. Unfortunately I was back to square one. Once again dozens of images were now not showing up in the export of the web pages again.
    I just can't believe how buggy 1.5.2 seems to be. I thought maybe it was something to do with Repairing Permissions so I went and did all of that. Still no luck! Anyone else experience anything like this? I'm about ready to give up on this software.

    Victor,
    Yes larger hard drives will help but the day they are large enough to fit in a laptop with a professional photographers entire collection is a long way off and may never happen. There is no reason why Referenced files needs to be so difficult. Two quality programs that handled it with ease was RAW Shooter (now gone having been bought by Adobe) and Photo Mechanic which is superb for some tasks. For Aperture to have this many issues with referencing images is unacceptable and the market place will bear this out. I've quite using the program all together and have gone back to Photo Mechanic combined with IView and Photoshop. There's still room for an Aperture like product but Apple better get moving to make it work better. Microsoft just announced some of the upcoming IView capabilities that will be available next year. Adobe has CS3 and Lightrooom and I'm guessing Photo Mechanic isn't resting on it's heels. I really, really wanted to like Aperture and I worked with it day in and day out for nearly two months. As time went on the Referenced files just kept getting more and more unstable and I lost a ton of work due to it no longer being able to see some of those files.
    MacBook Pro Mac OS X (10.4.7)
    MacBook Pro Mac OS X (10.4.7)
    MacBook Pro Mac OS X (10.4.7)

  • ITunes won't launch after upgrade - says files are missing

    I had trouble upgrading to version 6 but disabled my anti virus software (McAfee) and the upgrade seemed to run OK. After restarting my computer iTunes won't run as it says files are missing and I need to install them. It was all working fine before. I have over 4200 tracks and I'm worried I've lost them although they are all still on my iPod. What do I do next? Please help.

    Sorted! Panic over. I ran the download again and everythin seems OK.

  • Everything on my desktop disappeared. i tried using the finder to locate specific files and they are missing. Help!

    i'm using a macbook pro retina, 2.4 GHz Intel Core i7, 8GB. operating OSX Yosemite 10.10.1
    everything on my desktop disappeared. i've managed to make my HD reappear on my desktop but my files etc are nowhere to be found. i tried using the finder to locate specific files and they are missing. Help! I foolishly filled up my desktop with piles of screen grabs and folders - no doubt that was the cause... what do i do, aside from punish myself for being so stupid?

    Could you have logged into another account?
    If you go to System Preferences>Users and Accounts what accounts are listed?
    To show users at login go to the Login Options of chanck the box that says show list of users.
    If they they are gone and you can't find them then restore them from a backup

  • Face time I can't hear the person I call but can see them and there end works fine! Also it says they are busy and won't connect but they get straight through me

    When using face time I can see the person but can't hear them they can see and hear me, also won't let me call them saying they are busy but they can call me

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • HT204370 My movies' audio isnt 5.1 as the description says. when I check out their info it says they are 2 channel. I have tried with two movies already and the audio description said Dolby 5.1

    My movies' audio isnt 5.1 as the description says. when I check out their info it says they are 2 channel. I have tried with two movies already and the audio description said Dolby 5.1

    Actually, try this instead. On the apple tv, under settings > Audio > Dolby digital
    Change it From AUTO (default) to ON
    That worked for me. All my eyetv encodes have stereo and 5.1 tracks. For some reason the auto option forces stereo. Setting it to ON forces the 5.1.
    Everything sounds nice again! It's just stupid that apple puts AUTO for the default and that setting results in stereo not 5.1.

  • HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR,  as I open files in a folder and lets say they are labeled in yellow  they are all going back to  the camera raw default , in other words no ma

    HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR,  as I open files in a folder and lets say they are labeled in yellow  they are all going back to  the camera raw default , in other words no matter what work I have done, inc cropping they  all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to  yesterday, when this first started.
    I recently changed computer to 64bit from 32bit, not sure if this causing  the problem or not. Any help would be appreciated.

    Robert,
    Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals?  Sorry, I can't quite follow you.
    Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
    Thanks.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • HT1386 Because of limited internet on my iphone 5, i download updates to apps thru ITunes and then sync them to my iphone.  Lately, the apps download properly and the sync seems to go thru, but on my phone, they keep saying they are updating and it never

    Because I have limited internet package on my att iphone 5, I update apps on my computer thru ITunes and then sync them to my phone.  The downloads seems to go thru and then install.  But when I turn on my phone, the affected apps continue to say they are updating and it never goes away.  I do not have wifi but when I am connected, the apps don't update.  Help!!!!

    Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
    First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
    Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
    When I went back to my phone and tried installing them again (still on my computer), it worked!
    I hope this helps, because it was incredibly frustrating. Good luck!

  • I just recently got an iPod touch 5 and it won't let me download apps. It says they are free but when I install it , it keeps popping up saying before purchasing I must tap continue to verify my purchase something like that. Idk what to do. !!!!!

    I just recently got an iPod touch 5 and it won't let me download apps. It says they are free but when I install it , it keeps popping up saying before purchasing I must tap continue to verify my purchase something like that. Idk what to do. !!!!!

    Yes. You can set the payment method to "None" once you log into iTunes on your PC/Mac. I have it set up this way.

Maybe you are looking for

  • The most confusing broadband problem I've ever com...

    Well, This all started about 3-4 days ago now. I was online one night and suddenly, everything Disconnected. However, not entirely. The network shows that I am online with Internet access (Hence how I'm here right now posting this) But this is where

  • Data concurrency

    We have a PAYMENT table, and we get payments in a csv file. For every record in csv file we have different levels of validation and after each validation payment record status changes. For every record in csv file following is the logic 1. Insert rec

  • Changing volume in multiple clips at once?

    Im going crazy pulling the volume level up and down to the same level in multiple clips, are there any way to mark the clips and change the level in all of the at once?

  • Using navigateToURL and ExternalInterface.call triggering popup blocker

    I have a button and a text field.  Clicking the button sends the text to a backend server where it does a profanity filter.  I'm using an event listener to get a response from the back end.  If there is no profanity, the swf does a navigateToURL.  Un

  • Problem while designing an RPD

    Hi Experts, I have a problem while designing a chat. Basically I have a pivot table with X axis as calendar week ( 9 weekend dates) and Y axis as value a A Value of A in Y Axis X axis as : 2/6/2010, 1/30/2010, 1/23/2010, 1/16/2010, 1/9/2010, 1/2/2010