Aadhar number to be displayed in payslip in PE51

Hi All,
   I want to display Aadhar number (IT185 SUBTYPE 6) in payslip ( PE51 used ).I added field ICTYP in PE51_CHECKTAB and tried to write a Rule in PE51.But it is not getting displayed.Kindly help.
Thanks in advance.
Regards,
Helma

Hi All,
  Its done.

Similar Messages

  • Bank account number is not displaying in Payslip.

    Hi
    Please advice for the below mentioned issue: 
    Bank account number is not getting displayed in payslip. What i have observed is there are two entries coming in BT one is correct entry of wagetype /559 and another entry generating is of wagetype /470 where bank key is displaying 12345 and no account is coming.
    Screenshot attach:
    Please advice for the same on priority, what i am missing in config regarding the account number display on payslip.
    Regards
    Aparna

    How did you do the confic in PE51 to capture the bank account number?
    T-Code PE51 -> give your form name and then double click on single field , make follwing entries Table = XBT, Table field = BANKN, Identifier = /559

  • Web link in PAyslip through PE51

    Hi Guys,
    Is there any option to put website link on the payslip via PE51 or someother way.
    Regards,
    Praveen

    Hi Praveen,
    Choose the forma name used to display the payslip in PE51 and edit the form with the weblink you want.
    Regards,
    Sarath.C

  • How to set the number of rows displayed in a classical report at runtime?

    Hi,
    Our customer has several standard client hardware configuration and would like to enable end users to choose their 'display profile' at login time. This 'display profile' would contain predefined values for these hardware configurations and supposed to set various paramters that should define the number of rows displayed in a classical report region.
    I tried to provide parameters on the report region but it refused to accept anything but numerical values. Is it possible to do this?
    Regards, Tamas

    The link is to the closest linkable point in the documentation to the description of the Number of Rows (Item) attribute.
    It sounds like you have been trying to enter—unsuccessfully—an item name or substitution string into the Number of Rows attribute. The Number of Rows (Item) attribute is the one that actually allows you to do this. Click on the flashlight icon beside it to get a list of items from the application.

  • GB Payroll - Pension display in Payslip

    Hi every one at SDN family
    i have issue on pension contribution display in payslip -
    i have configure the pension type and  maintaied IT 0071 info type - but in payslip the contribution is not showing
    what might be the problem.. Please help me on this
    Thanks in advans
    Regards
    KSS

    Did you check the specification of the Evaluation Class 02 for the wagetype under concern (used for pension type) in table V_512W_D? This controls the printing on the rem statement.

  • ER Contribution should not Deduct from EE SAL and not Display in Payslip.

    Hi Experts,
    I  have Pension ER contribution Wage type:
    1. That should not deduct from Employee SAL
    2. Should not display in Payslip.
    3. Amount store in RT.
    What changes i should do in V_T512W_D table
    Appreciate your early response.
    Regards
    Raj

    Hi,
    We are maintaining the EE & ER contribution.
    EE is working fine with all the validation & deducting from employee every month.
    When we are handling ER contribution that amount is getting deducted from EE sal.
    So we want to restrict ER contribution Deducting from employee sal and not to display in Payslip.
    Figuring out how can we handle this thru Processing, Cumulating or Evaluation class.
    Kindly advise
    Regards
    Raj

  • In FBL5N report user wants the sales document number to be displayed,

    HI, Guys
    Need ur help to sort out the problem
    In FBL5N report user wants the sales document number to be displayed,
    but the sales ducument number column is coming blank and this needs to pick from VBRP table
    As I discussed with Abaper, he reqiures a key field which common in BSEG abd VBRP table
    So,Please guide me in approaching the right way
    Munender

    Hi,
        Speak with your SD consultant. They can set up the copy control in SD so that the sales order is populated in the invoice in field ZUONR (Assignment).This will then copy to the assignment field in accounting.
    Alternatively you can use an exit to populate another field during the Posting.
    Kind regards

  • Number of Rows Displayed in a SQL Report Region

    Hi,
    Just wondering whether it is possible to control the 'Number of Rows' displayed under the 'Layout and Pagination' section within the Report Attributes page.
    Basically need to know if I can programmatically control this or even better, can it be customized by the user as the user may want to see say 15 rows, 200 rows or 'All' rows of a certain region on the page. FYI, I have three different report regions on one page and want to give the user the flexibility to modify the number of rows displayed per region.
    Thanks.
    Tony.

    Tony,
    you can find that in this how-to document:
    http://www.oracle.com/technology/products/database/htmldb/howtos/howto_report_rownum.html
    Denes Kubicek

  • How to control number of rows displayed in a report  by user?

    Hi All!
    I have provided a select list called 'Number of rows' in my report page.User can choose any number in the list, and accordingly he should be able to see so many number of rows in that report page.
    For example: if user selects 50 from the list, he will be able to see 50 records at a time out of say 2000 records retrieved. I want to control number of rows displayed per page dynamically. And if he selects 25 in the select list, he should be able to see 25 records at a time out of 2000.
    How to do it? Please give me ideas.
    Thanking in advance.
    Regards,
    Deepika.

    Hi Deepika,
    If you have a Select List with Submit called, say "P1_ROWS", you just enter P1_ROWS into the Report Attribute's "Number of Rows (Item)" setting.
    Regards
    Andy

  • How to restrict number of rows display using ig:gridView

    Hi
    All
    How to restrict number of rows display using <ig:gridView datasource="{mybean.mylist}">
    i am getting 10 rows using data_row . i wanna show only first 5 rows .
    pageSize ="5" will be ok . but it displays remaining rows in next page. but i want to display only first 5 rows . is there any attribute to restrict number of rows.
    thanks
    rambhapuri

    I have no idea which component you're talking about. If want to discuss here about a non-Sun JSF component, then please mention about the name, version and build in detail. You can also consider posting this question at the website/forum/mailinglist of the component manfacturer rather than here. At least I can tell you that the Sun JSF h:dataTable has the 'rows' attribute for that. I can also suggest you to just take a look in the TLD documentation of the component in question. There should be all possible attributes listed with a detailed explanation about the behaviour.

  • Change number of record displayed for a single item alone

    Hi,
    I have a single data block with few items. Is it possible to make one item in the block as non-database item and make the display of record in the item alone to show multiple lines.
    i.e. All other items in the Data block shows single record, whereas this particular item should shows 10 records.
    Is this achievable?
    Or should i have to put that item in a separate data block and choose the data block property to "Number of records displayed" as 10?
    Thanks,
    Yuvaraaj.

    983448 wrote:
    Hi,
    I have a single data block with few items. Is it possible to make one item in the block as non-database item and make the display of record in the item alone to show multiple lines.
    i.e. All other items in the Data block shows single record, whereas this particular item should shows 10 records.Yes you can. But i will say re-check your design.
    Hamid
    Mark correct/helpful to help others to get right answer(s).*

  • The number of rows displayed in a JTable

    Hi,
    Can anyone tell me how I choose the number of rows displayed in a JTable? My table displays 25 rows, and thats a bit too many.
    Thanks.

    You dont need to do much.. I think you just have to initialze the table with ..
    JTablt t = new JTable(rows,cols);
    and make sure to make the 'rows' parameter to whatever u want. :-)
    Cheers

  • How to set the number of records displayed at run time

    Is it possible to set the number of records displayed block property at run time? The built-in 'GET_BLOCK_PROPERTY' can retrieve the number of RECORDS_DISPLAYED. But I can't find SET_BLOCK_PROPERTY to set this property. Is there anyway I can set this property programmatically? Thanks for any suggestions!

    Bookmark Go to End
    goal: How to vary the number of records displayed in a block
    programmatically
    fact: Oracle Forms Developer
    fix:
    Block property 'Number of Records Displayed' can not be changed during runtime
    using SET_BLOCK_PROPERTY. However, it is still possible programmatically change
    the visual appearance of the form so that it creates effect of changing this
    property. To achieve such an effect follow these steps:
    1. in Forms Builder, in the multirecord block define the new set of items.
    The simplest way is to copy/paste the original item and rename created item.
    2. set properties of these new items so that they are the same as the properties
    of the original items. If these new items were copied from original items
    then properties are already the same. Modify following properties
    'Database item' on new items to value 'No'
    'Synchronize with item' to the value of the original item
    'Number of Items Displayed' to desired value.
    'Visible' to 'No'
    In other words, these new items are mirrors of original items.
    3. code event, which is meant to trigger the change in block appearance.
    This code should use SET_ITEM_PROPERTY built-in to set properties
    like 'VISIBLE', 'ENABLED', 'NAVIGABLE', 'UPDATE_ALLOWED' and others
    to desired value for items which are about to be displayed, then
    move cursor to one of these just displayed items with GO_ITEM built-in
    and then hide the previously displayed items.
    Example:
    Assume that the block is built on SCOTT.DEPT schema. Following will
    change the set of displayed items
    set_item_property('dept.mdeptno',visible,property_true);
    set_item_property('dept.mdname',visible,property_true);
    set_item_property('dept.mloc',visible,property_true);
    set_item_property('dept.mdeptno',enabled,property_true);
    set_item_property('dept.mdname',enabled,property_true);
    set_item_property('dept.mloc',enabled,property_true);
    set_item_property('dept.mdeptno',update_allowed,property_true);
    set_item_property('dept.mdname',update_allowed,property_true);
    set_item_property('dept.mloc',update_allowed,property_true);
    set_item_property('dept.mdeptno',navigable,property_true);
    set_item_property('dept.mdname',navigable,property_true);
    set_item_property('dept.mloc',navigable,property_true);
    go_item('dept.mdeptno');
    set_item_property('dept.deptno',visible,property_false);
    set_item_property('dept.dname',visible,property_false);
    set_item_property('dept.loc',visible,property_false);
    Regards,
    Monica

  • Changing the default number of rows displayed in a interactive report

    Hi,
    I have a sql query based interactive report but i cant change the default number of pages i.e 15.
    is there any way to change the number of rows displayed.
    Thank you,
    rakesh

    Hi,
    That was very useful document that you shared, yes that is correct we can so it this way but there is another way doing it where in if you go to the report attribute section and in that there is Layout and Pagination and under
    that you can fix the number of rows, and over there we can also accept values from page item such as if the page item value changes the number of rows displayed in the report changes dynamically.
    In my report i get only pagination but not a option for layout.
    Any help will be appreciated.
    And also where i can get the links to the similar document that you have shared ?
    TY
    rakesh
    Edited by: rakesh119 on Apr 30, 2013 12:10 PM

  • Number of rows displayed per page in an interactive report

    Hi,
    I'd like to know if it's possible to change the values of the select list called 'Rows' in an interactive report (which is displayed in the search bar).
    Indeed, I want to display 16 rows per page and I can only choose among the values 1, 5, 10, 15, 20, 25, 30, 50, 100, 200...
    Thank you for your reply.
    Emilie.

    Hi Tobias,
    Thank you for your help.
    I had already tried this but it's not what I want. What your are saying only limits the values in the select list (for example, if I set to 16, I can't choose values higher than 16 in the select list 'Rows' of the search bar).
    I want to limit the number of rows displayed in the interactive report to 16 per page.
    Any other idea?
    Emilie.
    Hi Emilie,
    Go: Home>Application Builder>Application 301>Page 51>Interactive Report Attributes>Search Bar>Maximum Rows Per Page
    Set to = 16
    Oracle help description: Defines the maximum number to display in Rows Per Page Selector in the search bar.
    Greetings,
    Tobias

Maybe you are looking for