AAE - Error - Unable to retrieve MappingInterfaceLocalHome from JNDI while

Hi Friends,
We have an interface which runs in AAE. (Advanced Adapter Engine, PI 7.1, EHP1)
Sender is SOAP, Async Call.
We have used the condition to determine receiver. One Receiver is SOAP (by remove proxy) and another one receiver is RFC.
When we check the messages, in message monitoring, database overview, those are failed with error "
Unable to retrieve MappingInterfaceLocalHome from JNDI while invoking the mapping"
Detailed error is as below:
Execution of mapping "http:/bigbiz.com/xi/MDM/IM_MATERIALUPDATE" failed. Reason: MappingException: Unable to retrieve MappingInterfaceLocalHome from JNDI while invoking the mapping, NamingException: Exception during lookup operation of object with name localejbs/MappingBean, cannot resolve object reference., javax.naming.NamingException: Error occurs while the EJB Object Factory trying to resolve JNDI reference Reference Class Name: Type: clientAppName Content: sap.com/com.sap.xi.services Type: interfaceType Content: local Type: ejb-link Content: MappingBean Type: jndi-name Content: MappingBean Type: local-home Content: com.sap.aii.ibrun.sbeans.mapping.MappingAccessLocalHome Type: local Content: com.sap.aii.ibrun.sbeans.mapping.MappingAccessLocal com.sap.engine.services.ejb3.runtime.impl.refmatcher.EJBResolvingException: Cannot start applicationsap.com/com.sap.xi.services; nested exception is: java.rmi.RemoteException: [ERROR CODE DPL.DS.6125] Error occurred while starting application locally and wait.; nested exception is: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5106] The application .....
I confuse why suddenly this error comes, since it was working fine earlier. The message status is now 'To Be Delivered'.
Can you kindly clarify friends how to fix this ?
Kind regards,
Jegathees P.

Hi,
PI 7.1 Ehp1 receiver determination can be done conditionally by selecting operation specific...
I don't think this error is related to AAE ...looks like this error is related to server ...
check other mappings also whether they are executed with out any error ?
this is related to module lookup error...need to check with the basis
HTH
Rajesh

Similar Messages

Error :Unable to retrieve data from iHTML servlet for Request2 request

I open bqyfile to use HTML in workspace.
When I export report to excel in IR report.
Then I press "back" button I get error"Unable to retrieve data from iHTML servlet for Request2 request "
And I can not open any bqyfiles in workspace.
Anybody gat the same question? Thanks~

Hi,
This link will be helpful, the changes is made in the TCP/IP parameter in the registry editor of Windwos machine. I tried the 32 bit setting for my 64 bit machine (DWORD..) and it worked fine for me..
http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html
Hope this helps..

ERROR- Unable to retrieve data from SAP systems

We have installed SAP Netweaver Gateway (NWGW) Tool plugin in mac os.
When we are trying to browse the services we are able to see only SDATA services in NWGW plugin.
So we have changed the service from ODATA to SDATA in gateway system. We are able to see the services in the NWGW plugin.
When we are trying to get the response in xcode by using the following code,
SDMConnectivityHelper *supConn = [[SDMConnectivityHelper alloc] init];
     LiteSUPUserManager *supUserManager = [supConn activateSUPModeWithHost:@"xxxx" andSUPPort:xxxx andSUPFarmId:@"0" andAppId:@"xxxx"];
     [supConn registerSUPUser:@"xxxx" andPassword:@"xxxx" andSecurityConfigName:@"Basic" andSUPUserManager:supUserManager];
     0262Service *service = [[0262Service alloc] init];
     [service setServiceDocumentUrl:[LiteSUPAppSettings getApplicationEndPoint]];
NSMutableArray *personalDataArray = [service get02PDWithData:[[supConn executeBasicSyncRequestWithQuery:service.02PDQuery] responseData] error:nil];
I am getting the following error
Returned Query URL: /02PD
ERROR :: SUPJsonException:expected string, found 140/Location:-[SUPRequest startSynchronous] + 1159
ERROR :: 400:Bad request/Location:-[SUPRequest startSynchronous] + 1184
Exception during parsing response data. Error: The document is not a valid data document
<?xml version="1.0" encoding="utf-8"?> <error ><message xml:lang="en">Malformed URL recieved :no protocol: /02PD</message> </error>
When I am trying to print the end point. I am getting null value
Please provide us the pointers to resolve the issue

Sounds like an SAP problem.

Unable to retrieve collections from the Search Service.

Hi,
I have a user trying to upload a collection. She gets the
following error:
Unable to retrieve collections from the Search Service.
Please verify that the ColdFusion MX Search Server is
installed and running.
Obviously, I checked the service. It was running. I restarted
the service. That did nothing. I restarted all the CF services.
Didn't fix the issue. I also rebotted the server, not expecting
that to work. It didn't.
Checking the server logs, I see this:
The description for Event ID ( 105 ) in Source ( ColdFusion
MX 7 Search Server ) cannot be found. The local computer may not
have the necessary registry information or message DLL files to
display messages from a remote computer. You may be able to use the
/AUXSOURCE= flag to retrieve this description; see Help and Support
for details. The following information is part of the event:
ColdFusion MX 7 Search Server.
Also, after talking to my co-worker more, it turns out this
occurred right after she uploaded a new collection to the
administrator. This link sounds similar to what I'm experiencing:
http://kb.adobe.com/selfservice/viewContent.do?externalId=6c6881a9
Maybe it's a corrupt collection?
but I don't see any errors in the log
(:\CFusionMX7\verity\Data\services\ColdFusionK2_indexserver1\log\status.log)
Finally, there are some errors in the Verity service, and it
looks like the Verity service Verity K2Server (Version 2.20pr6)
points to D:\CFusionMX\lib\k2server.exe, which doesn’t exist
anymore because we’ve upgraded to MX7.I'm not sure if this is
an old service left over from before we upgraded from CFMX to
CFMX7.
We are running CFMX7 on a Windows 2003 Server SP1 if that
matters.
Thanks in advance for any help.

In the left hand panel of the ColdFusion Administrator expand
the Data & Services link. Then select the Verity K2 Server
link. Change localhost to 127.0.0.1 in the Verity Host Name
textbox.
Ted Zimmerman

Conflict Resolver Sync Error - Unable to retrieve conflict information from the sync server

So I have been using iTunes with my iPhone 3GS and now my iPhone 4 to sync with my Outlook for many years now and it has been flawless.
I recently bought a new iPad and started syncing it as well.
Now as of late, after every 2 or 3 syncs, I get an error from iTunes displaying the Conflict Resolver and it says there are 42 sync conflicts.
When I try use the Review Now button it shows up and the issues are between my iPhone and Outlook and are only related to contacts.
As soon as I try to choose which record to resolve, the window immediately disappears without giving me a chance to finish and I get another dialog window with the error:
Unable to retrieve conflict information from the sync server.
Please try again the next time the conflict resolver window is presented.
When I try to sync again it seems to be fine. But then after I sync my iPad and theny iPhone again it shows up and it still won't let me resolve the conflicts.
I have tried the following:
1) Rest Sync History on all devices
2) I have had iTunes replace all the contacts on the iPad from iTunes
3) I have changed the conflict resolver to only notify when 50% of the data will be changed
I have had no such luck.
If I add a contact to Outlook or to my iPhone and then sync it seems to be syncing the new addtions correctly. However, I cannot get this issue with this 42 conflicts resolved for some reason. This has been going on for a month now.

Here is the solution.
Rationale: You want to be able to have the dates on your items (notes, contacts) on your iphone to be the same as on outlook. This will eliminate any sync conflicts. You will also notice that if you modify something on the iphone and sync, you will lose the modification you made.
Steps:
1) In outlook, export the data (contacts, notes) to a CSV file
2) Delete you notes/contacts in outlook
3) Sync your iphone and select replace information on this iPhone (in iTunes)
4) Now your contacts and notes will be empty on both your iPhone and Outlook
5) Now import your contacts and notes from the CSV files back into outlook. What this does is put the current date and time on every individual item
6) Sync your iPhone to iTunes normally
7) everything will work correctly now with no sync issues and no conflicts.
Sherali

CVU ERROR:Unable to retrieve database release version

Hi all, I want to install RAC on three nodes,but when I run "cluvfy" as ORACLE user, I got errors:
./runcluvfy.sh stage -pre crsinst -n nrac1,nrac2,nrac3 -verbose
ERROR:
Unable to retrieve database release version.
Verification cannot proceed.
but the ROOT user can run it with few errors , why?
how can I do ?

I was getting this same mysterious error immediately after a successful CRS install. The command I was running was "runcluvfy.sh stage -pre dbinst -n node1" from my stage directory. All previous executions worked correctly. My thought now is that the CRS install added JRE files that interrupt its paths; still not sure though.
The MetaLink article referenced above was very helpful in the end but only after I paid special attention to the wording at the very bottom. Originally, I dismissed the article because it is primarily for Solaris; while we are using Red Hat AS 4 update 5. However, in the very last sentence it states the following:
"Note: If you encounter same error for cluvfy stage -pre crsinst -n node on Linux x86-64 platform before CRS installation, please check if jdk 1.5 is installed. cluvfy works with jdk 1.4. Please install jdk 1.4 or install CRS and run cluvfy from CRS installation."
Ah, we had also installed JSE 6. And sure enough executing 'java -version' showed that it was picking up the path to JSE 6 not the 1.4.
So, following the note in the above article, I did two things. First, I changed the CV_HOME variable to $ORACLE_HOME/bin and ran 'which cluvfy' to verify the correct location. Second, I executed "cluvfy.sh stage -pre dbinst -n node1". It worked!

Unable to retrieve tables from this connection

I have been using Dreamweaver for over 5 years. I have been
using an Access database and ASP the entire time. I am using a
Windows 2000 server for the database and web site. I have used
every verson of Dreamweaver since Ultra Dev. When I bought verson 8
and upgraded to 8.0.2, I began getting the following message when I
try to edit or create a recordset.
"Unable to retrieve tables from this connection, click on the
'Define...' button to test this connection."
I don't know what to do. Is this a widespread problem? Is it
a Windows problem? Is it a Dreamweaver problem? Is it a network
problem?
Please HELP!

Did you ever get an answer for this ?
I am having the same issue but using XP professional.

Report error "Failed to retrieve data from the database."

Post Author: tknorst
CA Forum: .NET
I have an application using CR XI R2, and on certain users computers when they try to run a report they get the following error:
Failed to retrieve data from the database.Details: [Database Vendor Code: 229]Failed to retrieve data from the database.Error in File C:\DOCUME1\turkj\LOCALS1\Temp\WhseEmpJobAndActivityByUserAndDate {22DA2F53-4391-4307-9F2A-0E3C3EBE2198A}.rpt
The report uses SQLOLEDB (ADO) and integrated authentication - it runs fine on the development machine.
I found very little info on this error on the web (google) - so I hope someone here has an idea.

You need to make sure that those systems can get conneted to the database that is supposed to return data. To check that create a udl in clients machine.
Also do not change the schema of he report.

Error:Failed to retrieve data from database [Vendor Code:3001]

Hello FOlks am trying to run a crystal report but when i try to run it somehow returns this error i.e [Error:Failed to retrieve data from database [Vendor Code:3001], I have no clue wats happening with this.Can anybody please throw some light on this.Am providing the sql behind this report for reference.
SELECT "CLIENT"."CLIENT_NAME",
        "RECOVERY"."AMOUNT",
        "RECOVERY"."RECOVERY_TRANSACTION_INTERNAL",
        "RECOVERY"."ALLOCATION_CHECK_AMOUNT",
        "RECOVERY"."RECOVERY_DATE"
   FROM "HRI1_OWNER"."CLIENT""CLIENT",
        "HRI1_OWNER"."EVENT_CASE""EVENT_CASE",
        "HRI1_OWNER"."SETTLEMENT""SETTLEMENT",
        "HRI1_OWNER"."RECOVERY""RECOVERY"
WHERE "CLIENT"."CLIENT_ID" = "EVENT_CASE"."CLIENT_ID"
    AND "EVENT_CASE"."EVENT_CASE_ID" = "SETTLEMENT"."EVENT_CASE_ID"
    AND "SETTLEMENT"."SETTLEMENT_ID" = "RECOVERY"."SETTLEMENT_ID"
    AND "CLIENT"."CLIENT_CODE" <> 'CLIENT 1'
    AND "CLIENT"."MAJOR_CLIENT_ID" in
        (Select major_client_id
           from major_client
          where major_client_code in ('LA', 'PFG'))
ORDER BY "CLIENT"."CLIENT_NAME"Edited by: user11961230 on Nov 12, 2009 6:57 AM

@oradba:Hi Thanks for getting bak. Well i have ran the query using PL/SQL Developer tool and yes its mapping to ORA-03001:unimplemented feature. i dont know what the problem is.
@centinul: well i dont have any views in there.but still cudnt figure out why its throwing tht error
Thanks
Edited by: user11961230 on Nov 12, 2009 7:12 AM

I have been unable to retrieve emails from my external disk. I entered the Time Machine and tried to go to April 2013, but could not find emails. I have Lion OS X 10.7.5 .Thanks!

I have been unable to retrieve emails from my external disk. I entered the Time Machine and tried to go to April 2013, but could not find emails. I have Lion OS X 10.7.5 .Thanks!
Cecilia

I have been unable to retrieve emails from my external disk. I entered the Time Machine and tried to go to April 2013, but could not find emails. I have Lion OS X 10.7.5 .Thanks!
Cecilia

Unable to retrieve information from the sync server

This only just started after I updated to the new 3.1 software, which included an update to the Mobile Me control panel. I sure would love to fix it, because the error message pops up every 20 seconds. My phone is syncing with MM and with my PC.Also,i have been ok with retrieving my job bids from http://www.besteventstaff.com since i signed up.Which was over 2 weeks ago but today everything won't load.I contacted the admin at Best Event Staff and hey are telling me they haven't had any other complaints.Pls help me out here.Why has things stopped loading so suddenly?Thanks in advance

I have notes from my palm days too! If you haven't resolved this, below there is a "more like this" set of links. One of them lists four solutions to this problem including how I resolved mine. Good luck!
Re: How do I resolve "unable to retrieve conflict information from the sync server" when syncing with Outlook

Unable to retrieve data from a nested table in Oracle 8i from JSP

How do i retrieve data from a nested table in Oracle 8i from my JSP code?
When i try to execute the query , a general error is thrown.
Kindly advice as soon as possible.

How do i retrieve data from a nested table in Oracle 8i from my JSP code?
When i try to execute the query , a general error is thrown.
Kindly advice as soon as possible.

Unable to retrieve mail from server on my account

Hi there.
I am unable since june 26 to retrieve email from the server. I check information on my mail app and i see my mail list store on the server. I also tried to send me an email. But still unable to retrieve it. So i can send email, but enable to get them. I tried to reconstruct the database directly on the server without success.
OSX server 10.4
Does someone have an idea of what i could be?
Thx.
Alain

Hi
Not a lot to go on is there? However if you use the GUI or the command line its a good idea to stop the mail service before attempting a Reconstruct. In my experience I don't think its ever worked using the GUI. Perhaps others have had more luck?
Following these instructions should get you back on track:
http://docs.info.apple.com/article.html?artnum=107996
You'll get all previously read mail marked as unread but that's easily dealt with. As already stated it's difficult to give any clear advice as you are keeping things to yourself somewhat. The above link assumes its a standard Mail Service setup using the GUI alone.
Tony

IB Error: Unable to read symbols from "UIKit" (not yet mapped into memory)

I created a simple view program for iPhone, using IB to add a button and a label, once the button is clicked, the label text is changed.
I am able to compile it fine, and ran it. The program/view showed up. But when I clicked on the button, the console showed this message:
This GDB was configured as "i386-apple-darwin".warning: Unable to read symbols for "/System/Library/Frameworks/UIKit.framework/UIKit" (file not found).
warning: Unable to read symbols from "UIKit" (not yet mapped into memory).
I checked UIKit info, it's physically (full path) at:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS2.0.sdk/System/Lib rary/Frameworks/UIKit.framework
The relative path to SKD is:
System/Library/Frameworks/UIKit.framework
I'm running the latest SDK beta 8, OS X 10.5.4 latest update.
Anyone had this bizarre problem? I was able to run all Apple samples fine.
Please help!
THanks!

The answer is mentioned in a few other posts, but I thought I'd repeat it here, so that it's easier to find this solution in the future.
I got the same problem trying to build an iPhone-Simulator application using another build process -- in this case, Boost Build. When I tried to run the program, it gave me the same nonsensical dynamic-library error.
The problem is that the application you built for the iPhone Simulator is NOT a real application, even though it looks like one. You need to run it from within Xcode.
In my case, I got around the problem by building the GLPaint sample using Xcode, copying over the executable it generated with the one I generated via Boost Build, then running GLPaint (actually my program now) from within Xcode. Then it worked.
So far, it seems that Macintosh and iPhone are very unfriendly platforms to someone that's trying to port an existing project. Any attempt to do something, without completely buying into the Apple way of doing everything, leads to a torrent of cryptic undocumented errors. Even an old Unix guru like me can't keep up.

Software Update Error "Unable to retrieve phone in...

Hi ...
I have Nokia E50 and i am trying to update its software from Office LAN but i am getting the message "Unable to retrieve phone information". I have latest NSU v 1.4.14 installed on my machine. There is also a new firmware version available. Can anyone help me out on this ??
Thanks

Check the Firewall for a USB connection? mmmmm... Anyway, besides the firewall being controlled by my company, I've always succeeded in updating the phone until now.

AAE - Error - Unable to retrieve MappingInterfaceLocalHome from JNDI while

Similar Messages

Maybe you are looking for