AAk handling in different scenarios

Hi,
We have been receiving (in system "B" and "C") BW objects (Infoobjects, cubes,..) by AAK as Customer Content developed in System "A".
From now on we have to maintain & deliver mentionated BW objects, our goal is deliver it by AAK.
We want to develop in System "B", forward it to System "C" by common transports and bundle it in System "C" (generate PAT-files), is it possible? Shall we do anything before bundle it in new development system "B" / delivery system "C"? Do we have any assumption?
Thanks in advance!

Hi Shailesh,
There are SAP standard alerts available but by default all alerts are inactive.
See the below link for more details about Purchase Order Collaboration,Supply managed inventory,Release Process,Supply Network inventory ,Work order Collaboration and Invoice Collaborationalert types.(Exception Management -->Alert types)
http://help.sap.com/saphelp_SNC700_ehp02/helpdata/en/0f/893a40243c174ee10000000a1550b0/frameset.htm
You can activate alert types as per your need.
SPRO>Supply Network Collaboration>Exceptions>Alert Type Activation>Activate Alert Types
Enter alert type which you required.
Regards,
Nikhil

Similar Messages

Handle 2 different versions of proxy in Sproxy

Hi,
We have two different releases going on and in XI we have mapped 2 different versions of proxy to 2 different SWVC. But when I generate the proxy in R/3 the proxy-interface name and Implementing class name are same in both the versions, so when I make changes to the newer version it is getting copied into the older version as well which we don't want to happen. Any idea how we should be handling 2 different versions for the same proxy?
Thanks,
David.

962776 wrote:
Is it possible to have two or more versions of Coherence on several JVMs in the same cluster? Say Coherence 3.6 on one JVM and Coherence 3.7 on another. Would there be cases where functionality may break where the same client gets routed to one version of Coherence and then later to another version on the same cluster?I think Coherence will not allow joining the cluster with different major version numbers. Versions much closer to one another may be able to coexist, but in general it is not recommended (of course a rolling restart upgrade of Coherence would by definition lead to this scenario).
For TCP*Extend there is a bit more leniency in the system, there are different protocol versions for TCP*Extend and some TCP*Extend protocol versions allow backward compatibility for a client running on the previous protocol version.
In short, you should always ask for confirmation from Oracle for specific version combinations.
Best regards,
Robert

Different scenario to run Former XML Publisher report

Hi All.
I have some different kind of scenario to run the XML Publisher report. Please look into the following scenario and requirements:
In my current project we are implementing 22 languages like Chinese, Japanese, Spanish etc. Out of these 22 languages, 8 languages will be installed and 14 will be uninstalled. We are defining the language on 2 places: OU level and Address level. For those reports that need to be translated, we are using XML Publisher to achieve this, but we have different scenario to pass the language, in order to select the corresponding template.
Scenario: As i mentioned we are defining the languages on address level, it is considered that the language defined at the address level will be customer's preferred language and he would like to see the output in that language only. there are 2 possible conditions while running the report: 1. User may select the language in which he want the report to be displayed in. 2. User may not select any language. The 1st scenario can be fulfilled by standard functionality. but in case of second scenario when user does not select any language then we need to display the report in language defined on address level for that customer. For Ex: if the Invoice report is running for 4 invoices and have 2 different customers and their preferred language is different, suppose for 1 customer it is Chinese and for another one it is Japanese. Then we need to display the output in customer's preferred language only i.e for Japanese customer it should be in Japanese and for Chinese customer it should be in Chinese i.e 2 different templates will be applicable.
So as per this while submitting the concurrent request we need to check whether user has selected the language or not? And after making all the conditions check we will have to submit the xml publisher report using API. Do you have any suggestion how can we achieve this task?
Please suggest.
Thanks,
AS

Hi AS,
How about using a conc prog parameter for User selected language, and XML element data at customer level, then call a subtemplate (or multiple embedded regions in the same template) in the required language based on if or case logic in the template.
Regards,
Gareth

How to handle the different pricing conditions changes in BI.

Dear Friends
can any one send me Regarding
How to handle the different pricing conditions changes in BI.
Thanks & Regards
Ramana

Hi,
Take a look at the 0sd_o06 ODS and 2lis_13_vdkon datasource for sales billing conditions.
http://help.sap.com/saphelp_nw70/helpdata/EN/36/8188408bc0bb4de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/7f/0f8c4037fba62be10000000a1550b0/frameset.htm
Regards.

How can i set different number of iterations for different scenario profiles that we add to "AutoPilot" in load testing of OATS

Hi,
I have few set of load test scenarios, I would like to add each of these test scenarios to "AutoPilot" and run each different scenario profile at different number of iterations.
As in Oracle Load Testing the "Set Up AutoPilot" tab I see a section like this "Iterations played by each user: ", which says run these many iterations for every virtual user of all profile added under "Submitted Profile Scenario". So is there any thing like that to set different iterations for every scenario profile added in Autopilot.
Thanks in advance

It's not a built-in feature to override a page's styles on a tab-by-tab or site-by-site basis, but perhaps someone has created an add-on for this?
It also is possible to create style rules for particular sites and to apply them using either a userContent.css file or the Stylish extension. The Greasemonkey extension allows you to use JavaScript on a site-by-site basis, which provides further opportunity for customization. But these would take time and lots of testing to develop and perfect (and perfection might not be possible)...
Regarding size, does the zoom feature help solve that part? In case you aren't familiar with the keyboard and mouse shortcuts for quickly changing the zoom level on a page, this article might be useful: [[Font size and zoom - increase the size of web pages]].

How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?

Dear all
How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?
Thanks
Regards
karan

Hello
These are the following errors
1. Trace level="1" type="T">no interface action for sender or receiver found</Trace>
2. <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!
3.
<Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</
Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>Trace level="3" type="T">Error of the prevous version:</TraceTrace level="3" type="T">Error ID APPLICATION_ERROR</Trace>
tThere are repeating errors also.
TThanks
Regards
kkaran

Need pdf file links for different scenarios

Hi folks,
I am new to PI.Please can any body provide me pdf file links for different scenarios like File to File, File to JDBC,JDBC to File,File to RFC, RFC to File, File to IDOC, IDOC to File, Http to RFC, Web services to RFC, File to Mail,ABAP to ABAP proxy and Java Proxies to JDBC.
Thanks in advance.
SAP XI/PI Moderator ****************
Very Simple. Search SDN.
Thread Locked.
SAP XI/PI Moderator ****************
Edited by: Aashish Sinha on Feb 21, 2012 1:36 PM

hi chandra, do you have the pdf file for fi-ca configuration

Posting block Question in How to handle inventory management scenarios

Hi all - I have a question in document
<b>"How to...Handle Inventory Management Scenarios in BW"</b>
can anyone please tell me what a posting block is in this document...
also I did not understood what a Validity table is?
thanks,
Sabrina.

Hi Sabrina!
A 'posting block' period is something that now you are facing in inventory management, but you have to consider it in ALL logistic cockpit flows (what you can see in LBWE).
This requirement can be easily explained in this way: as you know, to fill a setup table you have to activate the extract structure of the datasource for which you want to run the setup job (otherwise the system says that no active extract structure exists, do you remember ?); but, by doing so with the posting operations open (in other words, users can create new document or change the existing ones), you run the risk that these records are automatically included in the extraction queue (or in SM13 if you are using unserialized method) AND also collected in setup table ! And you will have the same records with the initial load (from setup table) and then the same from delta load (from the queue): a nice data duplication.
To avoid this situation, a "posting block" (or a "free-posting period" or a "downtime") is requested. No one can post new document during your setup job...
Hope now is clearer...
Bye,
Roberto

Question on "How to Handle Inv management Scenarios in BW" docuemnt.

Hi all,
I read the document "How to Handle inventory management scenarios in BW" and I did not understood what a snapshot scenario is? Can anyone tell me what is the difference between snapshop and non-cumulative scenario's.
thanks,
Sabrina.

In a non-cumulative scenario the current stock of any day (or month) is not stored physically in the cube. Instead the stock values over time is calculated dynamically at query runtime by the BW OLAP engine, which basically derives the stock by summing up the periodic value changes (cumulative inflow and outflow of the non-cumulative key figure), which are stored in the cube (together with a so called stock marker used as the basis of the calclation).
In the snapshot scenario the current stock of any month is calculated in a snapshot ODS and then loaded to a cube. This means that the the stock value is physically stored in the cube in an ordinary cumulative key figure.
Since a non-cumulative cube store value changes and not the actual stock this means that performance might be bad if there are many value changes for each characteristic combination in a month (since the stock is calculated at runtime and many records must be processed to derive the stock). So in this case the snapshot scenario is better since no runtime calculations of the stock need to occur and since only one record, containing the actual stock value will be stored in each month for each characteristic combination having a stock value.
I think you would be better of with an example, but with this explanation in mind looking at the scenarios in the How to again might clarify things...
Regards,
Christian
/ Christian
Message was edited by: Christian

How to handle inventory management scenario

Hi All,
In How to handle inventory management scenario whitepaper, I fail to understand the basic difference between 'Inventory Management with non-cumulative Key Figures' and 'Inventory Management with Snapshots'. Can anyone please explain me the basic difference.
Thanks
PB

Hi Loic
Can u please see if all the steps listed below are OK.
While setting up the IM Scenario
I have jotted down the steps with valuable inputs from you and paper 'How to Hanlde IM scenarios'
Please find the steps below. Kindly review them and let me know in case I have got anything wrong or missed out on anything.
1. Transfer Business Content Datasources 2LIS_03_BX , 2LIS_03_BF, AND 2LIS_03_UM in RSA5.
2. Go to Transaction LBWE, Activate Datasources 2LIS_03_BF, AND 2LIS_03_UM.
3. Go to Transaction MCB_ select SAP BW usage 'Standard' Radio button.
4. Save it.
5. Go to Transaction MCNB, enter name of run Stock_init. Enter Termination date in future. Enter Datasource as 2LIS_03_BX.
6. Execute the initialisation.
7. Entries can be found in SETUP Table MC03BFSETUP & MC03BFSETUP.
8. Run SETUP for 2LIS_03_BF, AND 2LIS_03_UM using TCodes OLI1BW and OLIZBW respectively.
9. Run the extraction for 2LIS_03_BX in BW.
10. Compress the request with No Marker Update NOT SET i.e. unticked or unchecked.
11. Run the extraction for 2LIS_03_BF in BW.
12. Compress the request with No Marker Update SET i.e. ticked or checked.
13. Run the extraction for 2LIS_03_UM in BW.
14. Compress the request with No Marker Update SET i.e. ticked or checked.
Steps 1 and 2 shall be executed in Development and transported to production and step 3 onward should be carried out in Production itself with Posting Block.
Thanks in advance.
Regards
PB

Documentation on Designing tips - for different scenarios

Hi Gurus:
Is there any good doc's for 'Designing tips - for different scenarios' like using Line Item Dimensions, aggregates, copying ODS to ODS, cube modelling, cache....
The common scenarios we come across in real life..Of course I understand it varies from client to client
Would really appreciate any help..
Many thanks

hi,
there are docs in sdn forum may help, explore in business intelligence section, also service.sap.com/bi
efficient infoprovider modeling
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/79f6d190-0201-0010-ec8b-810a969028ec
aggregate
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
cache
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/31b6b490-0201-0010-e4b6-a1523327025e
hope this helps.

SQL 2008 Trigger to handle multi rows scenario

I have created below trigger to start logging the company changes from the table1 into another audit table. It works fine with single row but crashing with identical change with multiple rows. Can you please help me to update the trigger to handle multi-row
scenario. Thanks.
GO
IF
NOT EXISTS
(SELECT
* FROM sys.objects
WHERE object_id
= OBJECT_ID(N'[dbo].[Company_AuditPeriod]')
AND type
in (N'U'))
CREATE
TABLE [dbo].[Company_AuditPeriod](
      [Client] [varchar](25)
NOT NULL,
      [Period] [varchar](25),
      [Table_Name] [varchar](25),
      [Field_Name] [varchar](25),
      [Old_Value] [varchar](25),
      [New_Value] [varchar](25),
      [User_ID] [varchar](25)
      [Last_Update] [datetime],
      [agrtid] [bigint]
IDENTITY(1,1)
NOT NULL,
ON [PRIMARY]
GO
--create trigger
SET
QUOTED_IDENTIFIER ON
GO
CREATE
TRIGGER [dbo].[Table1_Update]
ON [dbo].[Table1]
FOR
UPDATE
NOT
FOR REPLICATION
AS
BEGIN
DECLARE
      @status
varchar(3),
      @user_id
varchar(25),
      @period
varchar(25),
      @client
varchar(25),
      @last_update
datetime
DECLARE
      @Old_status
varchar(3),
      @Old_user_id
varchar(25),
      @Old_period
varchar(25),
      @Old_client
varchar(25)
SELECT
      @status
= status,
      @user_id
= user_id,
      @period
= period,
      @client
= client,
      @last_update
= last_update
FROM Inserted
SELECT
      @Old_status
= status,
      @Old_user_id
= user_id,
      @Old_period
= period,
      @Old_client
= client
FROM Deleted
If @Old_status <> @status
INSERT INTO Company_AuditPeriod
VALUES ( @client, @period,
'Table1',
'period',@old_status, @status, @user_id, @last_update)
END
GO

Sorry for the confusion.
I just made sure the table name is same in sys.objects statement and create table statement (there was a typo)
IF
NOT EXISTS
(SELECT
* FROM sys.objects
WHERE object_id
= OBJECT_ID(N'[dbo].[Company_AuditPeriod]')
AND type
in (N'U'))
CREATE
TABLE [dbo].[ Company_AuditPeriod](
Earlier you created Trigger on Company_AuditPeriod but
We have to create trigger on Table1 please with multi row scenario. Thanks.
--Company_AuditPeriod DDL
GO
IF
NOT EXISTS
(SELECT
* FROM sys.objects
WHERE object_id
= OBJECT_ID(N'[dbo].[Company_AuditPeriod]')
AND type
in (N'U'))
CREATE
TABLE [dbo].[ Company_AuditPeriod](
      [Client] [varchar](25)
NOT NULL,
      [Period] [varchar](25),
      [Table_Name] [varchar](25),
      [Field_Name] [varchar](25),
      [Old_Value] [varchar](25),
      [New_Value] [varchar](25),
      [User_ID] [varchar](25)
      [Last_Update] [datetime],
      [agrtid] [bigint]
IDENTITY(1,1)
NOT NULL,
ON [PRIMARY]
GO
--Table1 DDL
CREATE TABLE [dbo].[Table1](
[bflag] [int] NOT NULL,
[client] [varchar](25) NOT NULL,
[copies] [int] NOT NULL,
[cost_bio] [decimal](28, 8) NOT NULL,
[cost_cpu] [decimal](28, 8) NOT NULL,
[cost_dio] [decimal](28, 8) NOT NULL,
[date_ended] [datetime] NOT NULL,
[date_started] [datetime] NOT NULL,
[description] [varchar](255) NOT NULL,
[expire_days] [int] NOT NULL,
[func_arg] [varchar](255) NOT NULL,
[func_id] [int] NOT NULL,
[ing_status] [int] NOT NULL,
[invoke_time] [datetime] NOT NULL,
[last_update] [datetime] NOT NULL,
[mail_flag] [tinyint] NOT NULL,
[me_mail_flag] [tinyint] NOT NULL,
[module] [char](3) NOT NULL,
[order_date] [datetime] NOT NULL,
[orderno] [int] NOT NULL,
[output_id] [int] NOT NULL,
[poll_status] [char](1) NOT NULL,
[printer] [char](16) NOT NULL,
[priority] [char](1) NOT NULL,
[priority_no] [int] NOT NULL,
[process_id] [int] NOT NULL,
[report_cols] [int] NOT NULL,
[report_id] [varchar](255) NOT NULL,
[report_name] [varchar](25) NOT NULL,
[report_type] [char](1) NOT NULL,
[server_queue] [char](12) NOT NULL,
[status] [char](1) NOT NULL,
[step_id] [char](8) NOT NULL,
[system_name] [char](8) NOT NULL,
[used_bio] [int] NOT NULL,
[used_cpu] [int] NOT NULL,
[used_dio] [int] NOT NULL,
[user_id] [varchar](25) NOT NULL,
[variant] [int] NOT NULL,
[agrtid] [bigint] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL,
CONSTRAINT [PK_acrrepord001] PRIMARY KEY NONCLUSTERED
[agrtid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 90) ON [INDEX]
) ON [PRIMARY]
G0<o:p></o:p>
--create trigger
SET
QUOTED_IDENTIFIER ON
GO
CREATE
TRIGGER [dbo].[Table1_Update]
ON [dbo].[Table1]
FOR
UPDATE
NOT
FOR REPLICATION
AS
BEGIN
DECLARE
      @status
varchar(3),
      @user_id
varchar(25),
      @period
varchar(25),
      @client
varchar(25),
      @last_update
datetime
DECLARE
      @Old_status
varchar(3),
      @Old_user_id
varchar(25),
      @Old_period
varchar(25),
      @Old_client
varchar(25)
SELECT
      @status
= status,
      @user_id
= user_id,
      @period
= period,
      @client
= client,
      @last_update
= last_update
FROM Inserted
SELECT
      @Old_status
= status,
      @Old_user_id
= user_id,
      @Old_period
= period,
      @Old_client
= client
FROM Deleted
If @Old_status <> @status
INSERT INTO Company_AuditPeriod
VALUES ( @client, @period,
'Table1',
'period',@old_status, @status, @user_id, @last_update)
END
go

Pls tell me usefull URLs for MPLS VPN different scenario .....

pls tell me usefull URLs for MPLS VPN different scenarios. presently i am doing research on this topic so pls tell me useful URLs so that i can get help.

Here's a good start: http://www.cisco.com/go/mpls
Hope that helps - pls rate the post if it does.
Paresh

Different scenarios for implementing screen exits

Hi all,
Is there different scenarios for implementing screen exits for different applications such as MM,SD....etc.

Hi all,
Is there different scenarios for implementing screen exits for different applications such as MM,SD....etc.

Same Problem - Different Scenario: Encountering Problems running Mac OS X c

Same Problem - Different Scenario: Encountering Problems running Mac OS X commands.
Hi. I'm having a weird experience on opening document using
the Microsoft word 2008 application in MAC OS X.
To be specific on what is the scope of my application.
What I'm trying to do is run or simulate my application on appletviewer on a certain pop-up HTML
document. The first part of my statement block on my code doing well on
executing the downloading process of a file and save it on local machine.
This portion of works fine.
But the thing that I'm having some difficulties is
whenever i Re-opened the downloaded file from my local machine
that is being downloaded from my server.
I'm trying to established a checking or triggering pattern that the
file from my local machine was modified or not.
doing this execution I'm using the following code below to figure it out:
java code:
portion of calling the trigger part
if((nMacEditMode = editFileViaMac(clientFile)) == 1)
baseApplet.addMsg("Opened and edited file on local machine ...");
else
if(nMacEditMode == 3)
baseApplet.addMsg("Opening and editing of file on local machine failed! Try again!!");
else
baseApplet.addMsg("No changes made. Server file unchanged! You may close this window.");
portion of the runtime execution of opening the file via MAC OS X
public int editFileViaMac(String wordFileName)
try
String cFile = wordFileName.trim().replaceAll(" ", "\\ ");
wordPath = wordPath.trim().replaceAll(" ", "\\ ");
Process wordProcess =null;
Date startTime;
Date endTime;
File wordFile = new File(cFile);
startTime = new Date(wordFile.lastModified());
String[] myCommand = { "open", "-a", wordPath, wordFile.getAbsolutePath(), "-W" };
wordProcess = Runtime.getRuntime().exec(myCommand);
wordProcess.waitFor();
endTime = new Date(wordFile.lastModified());
if (startTime.before(endTime))
return 1;
return 2;
catch(Exception ex)
baseApplet.addMsg("Method Error : editFileViaMac() - "+ex.getMessage());
ex.printStackTrace();
return 3;
Now the weird things happen here.
The file was able to opened- as I wanted to, but when a made changes or not doing anything.
The Microsoft Word 2008 application on the MAC Activity Monitor. The instance was still alive or
keep running and I execute MAC commands being implement on the Process on the Terminal and it still
stuck in that thing. which means I have to manually kill the process of the said application on
the GUI part of Task Manager of MAC and my 2nd statement on the if replies.
Any thoughts will glady appreciated.

Please ensure new topics are posted in an appropriate forum. I have moved this thread from "news & updates" but in future posts made there in error will be deleted.
Edited by: dcminter on 19-Aug-2009 13:13

AAk handling in different scenarios

Similar Messages

Maybe you are looking for