AAM failed to register Muse trial application as licensed

I used Muse in Beta and as trial app. Subcribed to Creative Cloud.
AAM installed several products correctly but failed to register Muse as licensed during install.
Opening Muse I still got the message that I had to buy a Creative Cloud license.
After uninstall of Muse, AAM still says that Muse should be installed, which it isn't.
Even clearing my Windows registry four times with two different reg cleaners did't help.
Manually using regedit I can't find any Muse keys.
How can i get Muse reinstalled???
Ysbrand
Netherlands

Hello,
After some very bad advice from the Adobe Helpdesk, I decided to find out myself what causes the problem.
In Short: The trial or beta version of Muse isn't upgraded by the AAM, but the app is installed twice on your PC
In Windows: Muse is installed a second time, not as the beta/trial related to Adobe Air, but as part the Flashbuilder map (you will also find the AAM there in case you want to uninstall the AAM)..
The 'AAM version of Muse' isn't listed in <Add or remove programs> in your control panel, only the trial version is listed there.
Uninstall the trial version using <Add or remove programs>
To uninstall the 'AAM version of Muse' I recommend to use 'Revo uninstaller'.
Revo will give you an overview of your installed apps including the AAM version of Muse that is not listed in <Add or remove programs>
Let Revo uninstall this version of Muse.
After this the AAM will give you a new opportunity to install Muse.
This time without problems and even including the preferences etc. of your trial version of Muse.
Cheers,
Ysbrand

Similar Messages

Adobe Muse CC (2014) - Installation Fails, then Finishes, but no application.

I'm having trouble installing Muse. the installer gets to 84% and fails.
I've uninstalled, repaired permissions, booted from repair partition and repaired, zapped PRAM and then tried them all again twice, but it still doesn't install.
Here's the error that I get:
Clicking the link only takes me to a blank Summery.htm
I've seen this thread but it didn't fix anything: Update Muse CC failed, I tried again but it didn't work. All other 6 updates succeeded. Message was: installation failur…
And I've tried everything on this page multiple times: Creative Cloud Help | Install, update, or uninstall apps
After clicking on "Retry" multiple times, it eventually installs, but the application is not in my Application folder and is nowhere to be found. I quit the Creative cloud app and relaunch it after a "Successful Install'" but the application isn't installed and the CC app shows that I need to upgrade it.
Muse CC shows up as installed even though I uninstalled it.
I've updated it several times, but it still will either fail, or finish and not actually install anything.
** UPDATE **
Tried installing on another computer. while the install said it failed, the application appeared in the application folder and it worked. It failed at 84-85% and apparently the uninstaller wasn't installed. I copied the Muse CC 2014 folder to my machine, restarted the creative cloud app and everything works. no idea why the CC app fail to install Muse, but the act of uninstalling it the first time removed my ability to reinstall Muse. It's working now but was a pain.

Same thing here. Will have to work with ver. 7.4 until you guys figure out what the issue is. Please let me know how to resolve.
This update installation process is completely different from previous ones where updates would install within Muse application; this update takes you to Adobe application website - offers "Download" of Muse 2014. This is confusing to me...does this mean download a completely new Muse or install an update? Clicking download offers me all CC applications "Try, try, try" etc. or, for Muse to "Install". Clicking install eventually brought me to OP's issue above.
Please help...

Error message on restart: Failed to register application management beans

We are receiving an error when deploying custom task flows to the spaces instance in our Development environment and are experiencing the following problems:
Custom taskflow instances are all being "overwritten" by a single parameter (we have a webcam 'widget' each space points do a different location, but when we deploy they all suddenly point to the same place - this is not reflected in the parameters for the instance of the task flow).
Errors we are finding when we deploy:
Message Level     1
Relationship ID     0
Component     xx_xx_Spaces
Module     oracle.webcenter.webcenterapp.internal.view.webapp
Host     xx.xx.com
Host IP Address     xx.xx.xx.xx
Thread ID     [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'
ECID     014fc7558b241cc9:-13d743d3:1367e1ed952:-8000-000000000001096f
Supplemental Detail     javax.management.InstanceAlreadyExistsException: oracle.webcenter.community:name=LoadTranslationsMXBeanImpl,type=LoadTranslationsMXBeanImpl,Application=webcenter,ApplicationName=webcenter,ApplicationVersion=11.1.1.4.0
at com.sun.jmx.mbeanserver.Repository.addMBean(Repository.java:453)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.internal_addObject(DefaultMBeanServerInterceptor.java:1484)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:963)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:917)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:482)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:714)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.registerMBean(JMXContextInterceptor.java:445)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:712)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.registerMBean(WLSMBeanServer.java:462)
at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor$1.run(PrivilegedMBeanServerInterceptor.java:55)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor.registerMBean(PrivilegedMBeanServerInterceptor.java:60)
at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterAppContextListener.createAndRegisterMBeans(WebCenterAppContextListener.java:389)
at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterAppContextListener.contextInitialized(WebCenterAppContextListener.java:233)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:637)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:69)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)..
Message Level     1
Relationship ID     0
Component     xx_xx_Spaces
Module     oracle.webcenter.webcenterapp.internal.view.webapp
Host     xx.xx.com
Host IP Address     xx.xx.xx.xx
Thread ID     [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'
ECID     014fc7558b241cc9:-13d743d3:1367e1ed952:-8000-000000000001096f
Message     Failed to register application management beans
I have searched please help.
Edited by: jrickoi on Apr 6, 2012 2:38 PM
Edited by: jrickoi on Apr 6, 2012 3:02 PM

I have no idea except to suggest you contact them.

Adobe Muse 'Trial initialisation failed' on Mac

Hello,
I am interested in trying Adobe Muse, however whenever I try to begin my trial I get an error message that says 'Trial initialisation failed, your trial has expired'. I have never used the software before, and I have tried creating another Adobe ID, I have installed it on another system and I still get the same error.
I am running Mac OS X 10.7.5 on a late 2006 iMac.
All help is greatly appreciated.

I have the same problem with a same Mac OS X 10.7.5 in our company
Muse Trial was instal on one of our Mac, trial was over, then we get instal to another Mac with new Adobe ID, but he said on last step after login ID that 'Trial initialisation failed, your trial has expired. as if we install muse before...and nothing helps. we try delete OOBE and MBLStore and Adobe muse, reinstal adobe air, but nothing ...it looks like its blocked with our global ip, but it can not be. Why he (Adobe Air?/Muse) think that we had already instal and over Muse Trial on another machine (Mac), when we did not do this? like all our Mac is the same one.

When downloading adobe muse trial from adobe application manager

adobe muse trial from adobe application manager im getiting error, 12152

Some users have reported issues with Internet Explorer 9 although it does not appear to be consistent. It is likely due to the security settings, install add-ons, or plug-ins which are causing the download button to not be available.

Register non web application on SSO

how can i register non web application ? I have installed app server , oid and was able to sync with active directory. I need to integrate and have a single sign on for all my application . What will be the next step ?

Thanks Kiran for your prompt response. I dont have any web based application. I have some of the applications where backends are oracle and sybase. How can a provide a single sign on for the application. Once the user enters his user name or password. If he has the prvilege the use multiple apps he dont have to enter username and password for each application. I had syn with windows AD. I have oracle db on unix. I believe i have to sync with EM users for all oracle db. what about sybase ?? how can i have the single sign on . I have OID, IAS installed on a single windows server.
Yesterda when i restarted the server i got the following error. when i checked the opmnctl status
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | OC4J_SECURITY | N/A | Down
HTTP_Server | HTTP_Server | 2088 | Alive
OID | OID | N/A | Down
earlier oc4j_security and OID was alive now only http_server is alive
when i tried to start the process i get the following errors
E:\OraHome_1\opmn\bin>opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=CV2K3TESTAPP02:6200
1 of 3 processes started.
ias-instance id=iasrep.cv2k3testapp02.corp.cvpsnet.net
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OC4J/OC4J_SECURITY/default_island
Error
--> Process (pid=0)
oid dependency failed
OID
failed to start a managed process because a dependency check failed
Log:
none
ias-component/process-type/process-set:
OID/OID/OID
Error
--> Process (pid=0)
database dependency failed
iasrep
failed to start a managed process because a dependency check failed
Log:
I would appreciate if anyone could help me

Getting "querypanel.dll failed to register" on Windows 7 32 bit machine

Trying to move from CR 2008 SP2 to CR 2008 SP3.
For the CR 2008 SP2 version of our application, which runs our Crystal .rpt files, we used Visual Studio 2005. we then created a Visual Studio .msi file, using the merge module (CRRuntime_12_2), to install this application on a target machine that had .NET Framework 2.0 and VC++ Redistributable 2005 SP1 installed. If these two latter prerequisites were not installed, our install would fail because the CEReportSource.dll could not be registered.
After installing CR SP3 on my development machine, we created a new Visual Studio project, again using Visual Studio 2005. I used CRRuntime_12_3 as the merge module and everything else was the same.
I was getting this same error message "CEReportSource.dll failed to register" when I attempt to install the SP3 version of the app on the very same machine on which I previously successfully installed the SP2 version. I found an answer in these forums to install Microsoft Visual C++ 2005 SP1 update. Even this did not help. When I installed MS VC++ 2008 Redistributable - x86 9.0.30729.17, finally the problem of "CEReportSource.dll failed to register" went away on XP and Vista machines.
Now I am trying to install my program on Windos 7 32 bit machine and I get "querypanel.dll failed to register".
Q1. By installing S VC++ 2008 Redistributable - x86 9.0.30729.17, the problem of "CEReportSource.dll failed to register" did not occur. Is this the right thing to do. I am not sure why VC++ 2005 SP1 did not fix the issue.
Q2.What do we need in order to prevent "querypanel.dll failed to register" error on Windows 7 32 bit machine.
Thanks for your time.

Moved to .NET SDK forum.
Search here, lots of info on distribution. Likely caused by MS updated the C++ runtime to include security updates. Go to MS's site and download the latest C++ distribution package with enhanced security.
If you use the CR MSI package rather than the Merge Modules it should work.
Thank you
Don
Edited by: Don Williams on Nov 9, 2010 2:16 PM

Importent6.dll fails to register on WTS (Citrix & Windows 2003 64bit)

Hi,
I am trying to install the BOE XI 3.1 client tools on a 64bit Windows 2003 R2 SP2 machine (used as Windows Terminal Server) and I get the message that importent6.dll and exportSDK.dll fail to register during the installation.
Did anyone of you out there had a similar problem so far? Due to the error I cannot get the import wizard installed.
Additionally it would be interesting to know if it is possible to use the import wizard XI 3.1 as a terminal server application in a WTS (64bit) environment.
Regards,
Stratos

Hi,
with regards to the "(x86)" folder i would not recommend installing the BOE Client Tools into that folder. Please create a own Folder (you can for sure do this on drive D:) and install it into the folder. You could create a "Program Files" folder instead of installing it into the "Program Files (x86)" Folder.
About the Errormessage of your .dll`s please check SAP Note - 1205687
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3132303536383726
About Windows7. Windows7 is only supported since SP3. Please use the SP3 Fill Build setup routine for the BOE Clients for installing on Windows7.
Regards
-Seb.

Solaris 10 8/07 failed to register (sconadm & GUI)

Hi,
I'm getting mad! :(
I'm not able to register my e6500 (bought used) to get the software updates.
I digged in the forum, but w/o any result.
I downloaded by hand any suggested patches, cleaned and restarted all cacao stuff but at the end I always get "failed registration!"
I can access to www.sun.com:80, cns-services.sun.com:443, getupdates1.sun.com:443, a248.e.akamai.net:443, cns-transport.sun.com:443
I also tried via GUI but w/o any success.
Here is the error on the log:
SEVERE: Error: SWUPOM register() exception: Failed to register asset with AMS. Error message is :com.sun.scn.offering.prom.AssetRegistrationException: InvalidAssetException
Aug 19, 2008 12:45:20 AM com.sun.cns.basicreg.cacao.SWUPOMCacaoAdapter registerSystem
SEVERE:
com.sun.scn.offering.swupom.SWUPOfferingInstance.register(SWUPOfferingInstance.java:370)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
com.sun.jmx.mbeanserver.StandardMetaDataImpl.invoke(StandardMetaDataImpl.java:414)
javax.management.StandardMBean.invoke(StandardMBean.java:323)
com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
com.sun.jdmk.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:203)
com.sun.cacao.agent.DispatchInterceptor.invoke(DispatchInterceptor.java:736)
com.sun.cacao.agent.auth.impl.AccessControlInterceptor.invoke(AccessControlInterceptor.java:618)
com.sun.jdmk.JdmkMBeanServerImpl.invoke(JdmkMBeanServerImpl.java:764)
com.sun.cacao.common.instrum.impl.InstrumDefaultForwarder.invoke(InstrumDefaultForwarder.java:106)
javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1410)
javax.management.remote.rmi.RMIConnectionImpl.access$100(RMIConnectionImpl.java:81)
javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1247)
java.security.AccessController.doPrivileged(Native Method)
javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1350)
javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:784)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
sun.rmi.transport.Transport$1.run(Transport.java:153)
java.security.AccessController.doPrivileged(Native Method)
sun.rmi.transport.Transport.serviceCall(Transport.java:149)
sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
java.lang.Thread.run(Thread.java:595)
Aug 19, 2008 12:45:20 AM com.sun.cns.basicreg.cacao.SWUPOMCacaoAdapter getRegisterResult
INFO: SWUPOM Fault: Failed to register asset with AMS. Error message is :com.sun.scn.offering.prom.AssetRegistrationException: InvalidAssetException
Some further infos:
#cat /etc/release
Solaris 10 8/07 s10s_u4wos_12b SPARC
Copyright 2007 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 August 2007
#java -version
java version "1.5.0_16"
Java(TM) Platform, Standard Edition for Business (build 1.5.0_16-b02)
Java HotSpot(TM) Server VM (build 1.5.0_16-b02, mixed mode)
#cacaoadm get-param java-home
java-home=/usr/jdk/jdk1.5.0_16
here is the content of my registration profile (yes I can login as I can use those user and pass to register w/o any problem on the same subnet a Solaris x86)
userName=<removed>
password=<removed>
hostName=ent6500
subscriptionKey=
portalEnabled=false
proxyHostName=
proxyPort=
proxyUserName=
proxyPassword=
Any hint?
(last note.. all 20 CPU's are on line)
any hint would be really appreciated.

INFO: calling ams.registerAsset .......
Aug 19, 2008 4:34:46 PM com.sun.scn.offering.prom.AssetManagementServiceProvider registerAsset
INFO: DEBUG: next call is ams.registerAsset
Aug 19, 2008 4:34:48 PM com.sun.scn.service.BaseServiceClient dumpThrowable
WARNING: XYXYXY
com.sun.scn.offering.service.ams.InvalidAssetException: The Asset information is invalid.
at com.sun.scn.offering.service.ams.InvalidAssetException_LiteralSerializer.doDeserialize(InvalidAssetException_LiteralSerializer.java:56)
at com.sun.xml.rpc.encoding.literal.LiteralObjectSerializerBase.internalDeserialize(LiteralObjectSerializerBase.java:216)
at com.sun.xml.rpc.encoding.literal.LiteralObjectSerializerBase.deserialize(LiteralObjectSerializerBase.java:124)
at com.sun.scn.offering.service.ams.AssetMgmtServiceIF_registerAsset_Fault_SOAPSerializer.deserializeDetail(AssetMgmtServiceIF_registerAsset_Fault_SOAPSerializer.java:159)
at com.sun.xml.rpc.encoding.SOAPFaultInfoSerializer.doDeserialize(SOAPFaultInfoSerializer.java:134)
at com.sun.xml.rpc.encoding.ObjectSerializerBase.deserialize(ObjectSerializerBase.java:192)
at com.sun.xml.rpc.encoding.ReferenceableSerializerImpl.deserialize(ReferenceableSerializerImpl.java:155)
at com.sun.scn.offering.service.ams.AssetMgmtServiceIF_Stub._readBodyFaultElement(AssetMgmtServiceIF_Stub.java:483)
at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:208)
at com.sun.scn.offering.service.ams.AssetMgmtServiceIF_Stub.registerAsset(AssetMgmtServiceIF_Stub.java:261)
at com.sun.scn.offering.prom.AssetManagementServiceProvider.registerAsset(AssetManagementServiceProvider.java:154)
at com.sun.scn.offering.swupom.SWUPOfferingInstance.register(SWUPOfferingInstance.java:338)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.jmx.mbeanserver.StandardMetaDataImpl.invoke(StandardMetaDataImpl.java:414)
at javax.management.StandardMBean.invoke(StandardMBean.java:323)
at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
at com.sun.jdmk.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:203)
at com.sun.cacao.agent.DispatchInterceptor.invoke(DispatchInterceptor.java:736)
at com.sun.cacao.agent.auth.impl.AccessControlInterceptor.invoke(AccessControlInterceptor.java:618)
at com.sun.jdmk.JdmkMBeanServerImpl.invoke(JdmkMBeanServerImpl.java:764)
at com.sun.cacao.common.instrum.impl.InstrumDefaultForwarder.invoke(InstrumDefaultForwarder.java:106)
at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1410)
at javax.management.remote.rmi.RMIConnectionImpl.access$100(RMIConnectionImpl.java:81)
at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1247)
at java.security.AccessController.doPrivileged(Native Method)
at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1350)
at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:784)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
at sun.rmi.transport.Transport$1.run(Transport.java:153)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
at java.lang.Thread.run(Thread.java:595)
everything is collected (CPU's HDD's...) at one point i got this warning in cacao log.
I've really no clue what the application means by "The Asset information is invalid".
I think it may be due to the fact that cpu #20 is not correctly detected:
This form the xml that is collected in cacaco
<cpu.list populated="20">
<cpu id="0">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="1">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="4">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="5">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="8">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="9">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="12">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="13">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="16">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="17">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="20">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="21">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="24">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="25">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="26">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="27">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="28">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="29">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu id="30">
<cpu.architecture>sparcv9</cpu.architecture>
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="Mhz">400</cpu.speed>
<cpu.status>P_ONLINE</cpu.status>
</cpu>
<cpu>
<cpu.architecture />
<cpu.device.id>0</cpu.device.id>
<cpu.model>UltraSPARC-II</cpu.model>
<cpu.speed units="" />
<cpu.status />
</cpu>
</cpu.list>
As you can see cpu31 is not correctly identified :(
Is this the reason?
Edited by: pinciopallino on Aug 19, 2008 5:03 PM

CR for VS2010 deployment - crtslv.dll failed to register

I'm still having problems with packaging up the CR for VS2010 library with our applications installation.
I'm using InstallShield 2011 for the installation setup.
I've included the CRRuntime_13_0.msm file. (That is the only MSM file I included, are the others needed also?)
I've included the Microsoft Visual C++ 2005 SP1 Redistributable Package (x86 and the x64 versions.)
I have tried to do a test install on both a 64bit and a 32bit Windows 7 computer and it keeps giving me the crtslv.dll failed to register error on both computers.
Error 1904.Module C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crtslv.dll failed to register. HRESULT -2147010895. Contact your support personnel.
I thought it might just be due to the 32 bit MSM causing the problem on the 64bit computer, but I can't even get it to install on a 32bit computer. (On the 32bit computer install, I even removed the x64 bit version of the MS C++ 2005 Redistributable from the installation setup just to make sure it wasn't causing a problem).
I have even tried having my Install Shield setup 'Chain' the CRRuntime_32bit_13_0.msi file to my main installation (not using the Merge module). Even when that runs, it produces the same crtslv.dll failed to register again.
BUT, if I run the CRRuntime_32bit_13_0.msi manually on the computer it installs correctly. (I even tried using the same /qf parameters that InstallShield is using on it and it also worked OK that way.) So I can't figure out how to get it to run in conjunction with my InstallShield installation.
Can anyone give me any suggestions?
Mike...

I finally got past this issue and got things to install, with a few hackish work-arounds.
First the CR13 msm redistributable appears to requre the 32 bit version of "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security" that you'll read about in every post. On 64 bit machines I found that even when it was installed,I would still get a crtslv.dll failed to register message, followed several other dlls not registering. Once I installed the 32 bit version on the 64 bit OS, the crystal 13 redistibutable installed fine everytime. I did this on several 64 bit VMs all running Server 2003,XP, and Windows 7. It ran fine every time.
The problem you'll face is how do you install the 32 bit version of this ATL security pack on a 64 bit machine. You may be able to download and run the 32 bit version from Microsoft's site with the link Ludek has posted. That wouldn't work for me because I had to distribute it with my software so I used the prerequisite available for InstallShield. The prereq however is designed to only run on 32 bit machines, so I edited it in InstallShield and modifed the conditions to allow it to run on both 32 & 64 bit operating systems.
The next problem encountered is that this 32 bit prereq getting installed on a 64 bit machine will result in an error being returned that the installation appears to have failed. Well it is a 32 bit installation not intended for a 64 bit OS and we're not supposed to do that. I did say hackish work-around. The 32 & 64 bit files are installed to different directories and the 64 bit version does not get overwritten. If you check the event viewer you'll see a message logged in that the installation of the ATL prereq completed sucessfully. So I modified the behavior of the prereq in InstallShield to "continue the setup if the condition still indicates it is required after completion". Now it runs without error and everything for Crystal installs sucessfully.
The final problem was also with the pre-requisite. The code determines if it is already installed by looking for the file:
[WindowsFolder]\WinSxS\x86_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_473666fd\ATL80.dll
I found on some machines it was previousy installed to:
[WindowsFolder]\WinSxS\x86_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.4053_none_d1c738ec43578ea1\
This results in the prereq being required every time because the file it's checkig for is not found. Furthermore, it fails every time, most likely because it's alreday installed and not supposed to be installed again. So once again, I modified the prereq conditios in InstallShield and made it look for the file in both locations to determine if it was installed.
I haven't seen any problems since with either the Crystal runtime or the ATL update. Happy day.
The part I stll don't understand is that SAP says they can't distribute the ATL update in their MSM because of licensing issues, but we can sell our software and distribute it freely. Microsoft even create the prereq so that we could distribute it freely. So why can't SAP distribute the required files for their runtime? A lot of people on these threads have wasted a lot of time and money on this issue. Ludek provides great support but maybe this issue needs to be investigated further by development.

DTSAGENT.DLL failed to register when trying to install CRRuntime_32bit_13_0_7

Hello together,
maybe some can help me with an installing issue with CRRuntime_32bit_13_0_7.
When i try to run the setup i get the error:
Error 1904. Module C:\Program Files\SAP BusinessObjects\Crystal
Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dtsagent.dll failed to register.
HRESULT -1073741819. Contact your support personnel.
I found something following the link: http://scn.sap.com/thread/1948999 but it didn´t really fix my problem. I think it´s a problem with the constellation of McAfee that is also using the dtsagent.dll
I welcome each comment, feedback and each suggestion which could help me to fix this problem.
Thanks
Chris

Hi Chris,
This issue has been discussed many times before. Please use the top right corner search box.
I searched for "error, 1904, install, crystal, visual studio" keywords and here are the results.
http://search.sap.com/ui/scn#query=error%2C+1904%2C+install%2C+crystal%2C+visual+studio&startindex=1&filter=scm_a_site%28scm_v_Site11%29&filter=scm_a_modDate%28*%29&timeScope=all
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications.

The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location

Could anyone please help in resolving the following
error:
Server Error in '/BizTalkXXXMyAppWcfService' Application.
The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc".
Please verify that the receive location exists.
It does exist: When I go to All Artifacts >> Receive Locations I can see: WcfService_BizTalkXXXMyAppWcfService/XXXMyApp
Also it is Enabled, green, up and running.
…and that the isolated adapter runs under an account that has access to the BizTalk databases. – Checked, the BizTalkUser has all the permissions to access BizTalk databases.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc". Please verify that the receive
location exists, and that the isolated adapter runs under an account that has access to the BizTalk databases.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0xc0c01666): The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc". Please verify that the receive location exists, and that the isolated
adapter runs under an account that has access to the BizTalk databases. ]
   Microsoft.BizTalk.TransportProxy.Interop.IBTTransportProxy.RegisterIsolatedReceiver(String url, IBTTransportConfig callback) +0
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfIsolatedReceiver`2.RegisterIsolatedReceiver(Uri uri) +318
[AdapterException: Failed to register isolated receiver for address "/BizTalkXXXMyAppWcfService/XXXMyApp.svc"; receive location does not exist or is disabled.]
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfIsolatedReceiver`2.RegisterIsolatedReceiver(Uri uri) +875
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHostFactory`3.CreateServiceHost(String constructorString, Uri[] baseAddresses) +363
   System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1423
   System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50
   System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1132
[ServiceActivationException: The service '/BizTalkXXXMyAppWcfService/XXXMyApp.svc' cannot be activated due to an exception during compilation. The exception message is: Failed to register isolated receiver for address "/BizTalkXXXMyAppWcfService/XXXMyApp.svc";
receive location does not exist or is disabled..]
   System.Runtime.AsyncResult.End(IAsyncResult result) +890624
   System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +180062
   System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107

Hi,
This seems to be a permission issue.
Makesure account used in the application pool is a member of the BizTalk Isolated Host Users group.
Also its working considering either make the ASPNET user account a member of your BizTalk Isolated Host Users group to make sure it has access to the biztalk databases (or change the asp.net services to run under a different account, which would need
to be done from the framework's core .config files)
Regards
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

Preview failed because Adobe Muse could not make connection over HTTP.

Preview failed because Adobe Muse could not make connection over HTTP.
The most commons cause of this is fire wall software which prevents HTTP connections,
you mai need to change Fire wall settings to allow Adobe Muse to make connections??
Fire Wall is not problem!!
I asked this question a month ago, no one has answered.
does anyone know how to solve this problem?
I apologize for the bad English
thanks in advance

Mac or Windows? What software do you have installed that may be interfering with an application's ability to open an internet connection (i.e. virus checker, anti-malware utility, firewall, etc.).

Where do I open the MUSE trial?

where do I open the MUSe trial?

You can start Muse like you start other apps.
--Open Applications folder and find the installed Muse folder.
--In that folder, double-click Adobe Muse CC.
We have a page that walks you through it:
http://helpx.adobe.com/creative-cloud/help/launch-creative-cloud-apps.html
I hope that solves the problem.
Best,
Rita Amladi
Creative Cloud Learn team

MDSRuntimeException: Failed to register CacheEventListener

When I attempt to run my customizations from JDeveloper 9.0.3.5 build 1447 against one apps instance, I get the above error. This is not happening from another instance.
How do I fix this?
Stack trace:
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = oracle.adf.mds.exception.MDSRuntimeException: Failed to register CacheEventListener (KEY=mds_region) (APP=FND); at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:891) at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1145) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1959) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:501) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:422) at OA.jspService(OA.jsp:40) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803) at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
oracle.adf.mds.exception.MDSRuntimeException: Failed to register CacheEventListener (KEY=mds_region) (APP=FND) at oracle.apps.fnd.framework.mds.cache.ATGCacheMgrDelegateImpl.<init>(ATGCacheMgrDelegateImpl.java:325) at oracle.apps.fnd.framework.mds.cache.ATGCacheFactoryImpl.<init>(ATGCacheFactoryImpl.java:44) at oracle.apps.fnd.framework.mds.OAMDSContextUtils.createMDSContext(OAMDSContextUtils.java:202) at oracle.apps.fnd.framework.mds.OAMDSContextUtils.createMDSContext(OAMDSContextUtils.java:149) at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3444) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:992) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:501) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:422) at OA.jspService(OA.jsp:40) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803) at java.lang.Thread.run(Thread.java:534) oracle.adf.mds.exception.MDSRuntimeException: Failed to register CacheEventListener (KEY=mds_region) (APP=FND) at oracle.apps.fnd.framework.mds.cache.ATGCacheMgrDelegateImpl.<init>(ATGCacheMgrDelegateImpl.java:325) at oracle.apps.fnd.framework.mds.cache.ATGCacheFactoryImpl.<init>(ATGCacheFactoryImpl.java:44) at oracle.apps.fnd.framework.mds.OAMDSContextUtils.createMDSContext(OAMDSContextUtils.java:202) at oracle.apps.fnd.framework.mds.OAMDSContextUtils.createMDSContext(OAMDSContextUtils.java:149) at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3444) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:992) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:501) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:422) at OA.jspService(OA.jsp:40) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803) at java.lang.Thread.run(Thread.java:534)

Hi Krish,
Try below apporach and update the thread:
Go to Project Settings of .jpr -> Configurations -> Development -> Runner
Under "Runner" there is a field named "Java Options". From this field value remove parameters having "CACHE" and run the page.
i.e. Remove parameters "-DFND_JDBC_STMT_CACHE_SIZE=200" and "-DCACHENODBINIT=true"
Regards,
Anand

AAM failed to register Muse trial application as licensed

Similar Messages

Maybe you are looking for